Nut upsuser - Oct 2016 - setting up CYBERPOWER CP1500PFCLCD

Hi,

Another beginner question. I spend hours trying to find the solution for
how to configure winnut properly but I' struggling to make it work. I want
my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it
down during power outage. I configured QNAP properly (like this:
http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know
what to do next.

I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD

I have no idea how to config monitoring. This part: MONITOR <system>
<powervalue> <username> <password>
("master"|"slave")

I found somewhere that I should add a line:
MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123456 slave

After starting Winnut I got a message: "fatal error: insufficient power
configured! edit your configuration and change the values"

I guess there is sth wrong with "MONITOR" part. Should I change
username/pass? Where can I check/change it? I found a tutorial about
setting up OpenGear
https://opengear.zendesk.com/entries/22948456-UPS-monitoring-and-automated-safe-shutdown-using-WinNUT
In this case it's easy to find UPS username and password. What about
CYBERPOWER?
Anything else I should do?

Thanks,
Tom
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161025/26cb1dc2/attachment.html>

[please use reply-all to include the list - the headers are not mangled]

On Oct 25, 2016, at 9:53 AM, Tomasz Przychodzie? wrote:
> 
> Hi,
> 
> Another beginner question. I spend hours trying to find the solution for
how to configure winnut properly but I' struggling to make it work. I want
my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down
during power outage. I configured QNAP properly (like this:
http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what
to do next.
> 
> I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD 
> I have no idea how to config monitoring. This part: MONITOR <system>
<powervalue> <username> <password>
("master"|"slave")
> 
> I found somewhere that I should add a line:
> MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123456 slave
> 
Does this help?
http://www.snbforums.com/threads/using-qnap-ups-server-to-signal-other-devices.17551/

It mentions that you should use the Admin password for QNAP.

Also, just to clarify, it sounds like <IP ADDRESS OF MY COMPUTER> should
be the IP of the QNAS unit, not the computer running WinNUT.

I changed IP to NAS IP instead of my PC IP and also used NAS login and
pass. Didn't work. When I wanted to launch WinNUT with new settings I got:
"Fatal error: insufficient power configured!" (same as before)

I got this log:

Level     INFO    10/26/2016 10:46:17    Detected OS as Windows NT
Level   NOTICE    10/26/2016 10:46:17    Network UPS Tools upsmon 2.0.0.4
Level     INFO    10/26/2016 10:46:17    Config Load: MINSUPPLIES set to 1
Level     INFO    10/26/2016 10:46:17    Config Load: NOTIFYCMD set to
"c:\Program Files\WinNUT\alertPopup.exe"
Level     INFO    10/26/2016 10:46:17    Config Load: POLLFREQ set to 5
Level     INFO    10/26/2016 10:46:17    Config Load: POLLFREQALERT set to 5
Level     INFO    10/26/2016 10:46:17    Config Load: HOSTSYNC set to 15
Level     INFO    10/26/2016 10:46:17    Config Load: DEADTIME set to 15
Level     INFO    10/26/2016 10:46:17    Config Load: RBWARNTIME set to
43200
Level     INFO    10/26/2016 10:46:17    Config Load: NOCOMMWARNTIME set to
300
Level     INFO    10/26/2016 10:46:17    Config Load: FINALDELAY set to 5
Level CRITICAL    10/26/2016 10:46:17    Fatal error: insufficient power
configured!
Level CRITICAL    10/26/2016 10:46:17    Sum of power values........: 0
Level CRITICAL    10/26/2016 10:46:17    Minimum value (MINSUPPLIES): 1
Level CRITICAL    10/26/2016 10:46:17
Edit your upsmon.conf and change the values.

Should I change MINSUPPLIES to 0? (WinNUT runs then - has "Running as
Application" status - how can I test if it's really working?). Does it
make
any sense to have MINSUPPLIES at 0?

Thanks,
Tom


2016-10-26 4:06 GMT+02:00 Charles Lepple <clepple at gmail.com>:
> [please use reply-all to include the list - the headers are not mangled]
>
> On Oct 25, 2016, at 9:53 AM, Tomasz Przychodzie? wrote:
> >
> > Hi,
> >
> > Another beginner question. I spend hours trying to find the solution
for
> how to configure winnut properly but I' struggling to make it work. I
want
> my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it
> down during power outage. I configured QNAP properly (like this:
> http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know
> what to do next.
> >
> > I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD
> > I have no idea how to config monitoring. This part: MONITOR
<system>
> <powervalue> <username> <password>
("master"|"slave")
> >
> > I found somewhere that I should add a line:
> > MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123456
slave
> >
> Does this help? http://www.snbforums.com/threads/using-qnap-ups-server-
> to-signal-other-devices.17551/
>
> It mentions that you should use the Admin password for QNAP.
>
> Also, just to clarify, it sounds like <IP ADDRESS OF MY COMPUTER>
should
> be the IP of the QNAS unit, not the computer running WinNUT.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161026/c0839fc5/attachment-0001.html>