thr3ads.net - asterisk users - [asterisk-users] Asterisk / PRI and Outbound Overlap Dialing [Apr 2018]

If this information is useful, please help other people find it:
Share via:

Mtt Cannon

2018-Apr-05 12:20 UTC

[asterisk-users] Asterisk / PRI and Outbound Overlap Dialing

I am trying to setup Asterisk to act like a PBX connected via a PRI gateway
to a voice netowrk where Asterisk is doing outbound
overlap dialing for calls that terminate via that PRI. AFter researching
through the archives and online dcocs, I thought I had
everyting setup right, dialplan configured for '_X!' and the
'overlapdial=yes' in the chan_dahdi.conf file, but when I try and
make a call, while the first digit triggers the outbound SETUP message,
that SETUP message always includes a 'Sending Complete'
parameter and any subsequent digits received from the originaing client
seem to be getting ignored as opposed to sent over in
subsequent ISDN INFORMATION messages.

Any idea what I might be missing here...i did restart both DAHDI and
Asterisk after making the changes to support overlap.

Logs and snippets are below..

Thanks
matt


localhost*CLI> core show version
Asterisk 15.2.0 built by root @ localhost.localdomain on a x86_64 running
Linux on 2018-02-21 19:10:36 UTC


chan_dahdi.conf

; Overlap dialing mode (sending overlap digits)
; Cannot be changed on a reload.
;
; incoming: incoming direction only
; outgoing: outgoing direction only
; no: neither direction
; yes or both: both directions
;
overlapdial=yes


DialPlan

localhost*CLI> dialplan show sippOrig
[ Context 'sippOrig' created by 'pbx_config' ]
  '_X!' =>          1. Dial(DAHDI/g1/${EXTEN})
[extensions.conf:697]

-= 1 extension (1 priority) in 1 context. =-
localhost*CLI>



Debug trace of the ISDN messaging



   -- Executing [7 at sippOrig:1] Dial("PJSIP/5712391000-00000019",
"DAHDI/g1/7") in new stack
PRI Span: 1 -- Making new call for cref 32794
    -- Requested transfer capability: 0x00 - SPEECH
PRI Span: 1
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=34
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent from
originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 TEI=0 Transmitting N(S)=46, window is open V(A)=46 K=7
PRI Span: 1
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=34
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent from
originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 > [04 03 80 90 a3]
PRI Span: 1 > Bearer Capability (len= 5) [ Ext: 1  Coding-Std: 0  Info
transfer capability: Speech (0)
PRI Span: 1 >                              Ext: 1  Trans mode/rate: 64kbps,
circuit-mode (16)
PRI Span: 1 >                                User information layer 1:
A-Law (35)
PRI Span: 1 > [18 03 a1 83 81]
PRI Span: 1 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)
Spare: 0  Preferred  Dchan: 0
PRI Span: 1 >                       ChanSel: As indicated in following
octets
PRI Span: 1 >                       Ext: 1  Coding: 0  Number Specified
Channel Type: 3
PRI Span: 1 >                       Ext: 1  Channel: 1 Type: CPE]
PRI Span: 1 > [6c 0c 21 81 35 37 31 32 33 39 31 30 30 30]
PRI Span: 1 > Calling Party Number (len=14) [ Ext: 0  TON: National Number
(2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
PRI Span: 1 >                                 Presentation: Presentation
allowed, User-provided, verified and passed (1)  '5712391000' ]
PRI Span: 1 > [70 02 80 37]
PRI Span: 1 > Called Party Number (len= 4) [ Ext: 1  TON: Unknown Number
Type (0)  NPI: Unknown Number Plan (0)  '7' ]
PRI Span: 1 > [a1]
PRI Span: 1 > Sending Complete (len= 1)
PRI Span: 1 q931.c:6531 q931_setup: Call 32794 enters state 1 (Call
Initiated).  Hold state: Idle
    -- Called DAHDI/g1/7
PRI Span: 1
PRI Span: 1 < Protocol Discriminator: Q.931 (8)  len=14
PRI Span: 1 < TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent to
originator)
PRI Span: 1 < Message Type: CALL PROCEEDING (2)
PRI Span: 1 < [18 03 a9 83 81]
PRI Span: 1 < Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)
Spare: 0  Exclusive  Dchan: 0
PRI Span: 1 <                       ChanSel: As indicated in following
octets
PRI Span: 1 <                       Ext: 1  Coding: 0  Number Specified
Channel Type: 3
PRI Span: 1 <                       Ext: 1  Channel: 1 Type: CPE]
PRI Span: 1 < [1e 02 80 88]
PRI Span: 1 < Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU)
standard (0)  0: 0  Location: User (0)
PRI Span: 1 <                               Ext: 1  Progress Description:
Inband information or appropriate pattern now available. (8) ]
PRI Span: 1 Received message for call 0x7fa6e00070b0 on link 0x1b1a130
TEI/SAPI 0/0
PRI Span: 1 -- Processing IE 24 (cs0, Channel ID)
PRI Span: 1 -- Processing IE 30 (cs0, Progress Indicator)
PRI Span: 1 q931.c:9095 post_handle_q931_message: Call 32794 enters state 3
(Outgoing Call Proceeding).  Hold state: Idle
Span 1: Processing event PRI_EVENT_PROCEEDING(13)
    -- DAHDI/i1/7-1a is proceeding passing it to PJSIP/5712391000-00000019
    -- DAHDI/i1/7-1a is making progress passing it to
PJSIP/5712391000-00000019
       > 0x7fa6c0068f00 -- Strict RTP learning after remote address set to:
10.100.0.95:51670
       > 0x7fa6c0068f00 -- Strict RTP switching to RTP target address
10.100.0.95:51670 as source
[Apr  3 14:29:49] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '0' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:49] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '3' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:51] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '4' may be ignored by peer. (Call
level:3(Proceeding))
       > 0x7fa6c0068f00 -- Strict RTP learning complete - Locking on source
address 10.100.0.95:51670
[Apr  3 14:29:51] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '7' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:51] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '6' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:52] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '2' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:52] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '0' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:52] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '0' may be ignored by peer. (Call
level:3(Proceeding))
[Apr  3 14:29:53] WARNING[25444][C-0000001a]: sig_pri.c:8797
sig_pri_digit_begin: Span 1: Digit '0' may be ignored by peer. (Call
level:3(Proceeding))
PRI Span: 1
PRI Span: 1 < Protocol Discriminator: Q.931 (8)  len=9
PRI Span: 1 < TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent to
originator)
PRI Span: 1 < Message Type: DISCONNECT (69)
PRI Span: 1 < [08 02 80 83]
PRI Span: 1 < Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)
Spare: 0  Location: User (0)
PRI Span: 1 <                  Ext: 1  Cause: No route to destination (3),
class = Normal Event (0) ]
PRI Span: 1 Received message for call 0x7fa6e00070b0 on link 0x1b1a130
TEI/SAPI 0/0
PRI Span: 1 -- Processing IE 8 (cs0, Cause)
PRI Span: 1 -- Found active call: 0x7fa6e00070b0 cref:32794
PRI Span: 1 q931.c:9345 post_handle_q931_message: Call 32794 enters state
12 (Disconnect Indication).  Hold state: Idle
Span 1: Processing event PRI_EVENT_HANGUP_REQ(15)
    -- Span 1: Channel 0/1 got hangup request, cause 3
PRI Span: 1 q931.c:7332 q931_hangup: Hangup other cref:32794
PRI Span: 1 q931.c:7089 __q931_hangup: ourstate Disconnect Indication,
peerstate Disconnect Request, hold-state Idle
PRI Span: 1 q931.c:6124 q931_release: Call 32794 enters state 19 (Release
Request).  Hold state: Idle
PRI Span: 1
PRI Span: 1 > DL-DATA request
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=9
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent from
originator)
PRI Span: 1 > Message Type: RELEASE (77)
PRI Span: 1 TEI=0 Transmitting N(S)=47, window is open V(A)=47 K=7
PRI Span: 1
PRI Span: 1 > Protocol Discriminator: Q.931 (8)  len=9
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent from
originator)
PRI Span: 1 > Message Type: RELEASE (77)
PRI Span: 1 > [08 02 81 83]
PRI Span: 1 > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)
Spare: 0  Location: Private network serving the local user (1)
PRI Span: 1 >                  Ext: 1  Cause: No route to destination (3),
class = Normal Event (0) ]
    -- Hungup 'DAHDI/i1/7-1a'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Auto fallthrough, channel 'PJSIP/5712391000-00000019' status is
'CHANUNAVAIL'
PRI Span: 1
PRI Span: 1 < Protocol Discriminator: Q.931 (8)  len=5
PRI Span: 1 < TEI=0 Call Ref: len= 2 (reference 26/0x1A) (Sent to
originator)
PRI Span: 1 < Message Type: RELEASE COMPLETE (90)
PRI Span: 1 Received message for call 0x7fa6e00070b0 on link 0x1b1a130
TEI/SAPI 0/0
PRI Span: 1 q931.c:9204 post_handle_q931_message: Call 32794 enters state 0
(Null).  Hold state: Idle
PRI Span: 1 q931.c:7332 q931_hangup: Hangup other cref:32794
PRI Span: 1 q931.c:7089 __q931_hangup: ourstate Null, peerstate Null,
hold-state Idle
PRI Span: 1 Destroying call 0x7fa6e00070b0, ourstate Null, peerstate Null,
hold-state Idle
Span 1: Processing event PRI_EVENT_HANGUP_ACK(9)
localhost*CLI>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20180405/ebb50ca3/attachment.html>

Richard Mudgett

2018-Apr-05 16:34 UTC

head link

[asterisk-users] Asterisk / PRI and Outbound Overlap Dialing

On Thu, Apr 5, 2018 at 7:20 AM, Mtt Cannon <mcannon9180 at gmail.com>
wrote:
>
>
> I am trying to setup Asterisk to act like a PBX connected via a PRI
> gateway to a voice netowrk where Asterisk is doing outbound
> overlap dialing for calls that terminate via that PRI. AFter researching
> through the archives and online dcocs, I thought I had
> everyting setup right, dialplan configured for '_X!' and the
> 'overlapdial=yes' in the chan_dahdi.conf file, but when I try and
> make a call, while the first digit triggers the outbound SETUP message,
> that SETUP message always includes a 'Sending Complete'
> parameter and any subsequent digits received from the originaing client
> seem to be getting ignored as opposed to sent over in
> subsequent ISDN INFORMATION messages.
>
> Any idea what I might be missing here...i did restart both DAHDI and
> Asterisk after making the changes to support overlap.
>
> Logs and snippets are below..
>
> Thanks
> matt
>
>
> localhost*CLI> core show version
> Asterisk 15.2.0 built by root @ localhost.localdomain on a x86_64 running
> Linux on 2018-02-21 19:10:36 UTC
>
>
> chan_dahdi.conf
>
> ; Overlap dialing mode (sending overlap digits)
> ; Cannot be changed on a reload.
> ;
> ; incoming: incoming direction only
> ; outgoing: outgoing direction only
> ; no: neither direction
> ; yes or both: both directions
> ;
> overlapdial=yes
>
Where is this option set in the chan_dahdi.conf file?  To have any effect
on a particular channel the option
MUST be set before the channel line that creates the channel.

[channels]
context=incoming
switchtype=euroisdn
signaling=pri_cpe
overlapdial=yes

; All options currently set are used to create the specified channels on
the next line.
channel=1-15,17-31
; Any options set AFTER the channel line above DO NOT affect those channels.

context=other

Richard
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20180405/b93c5102/attachment.html>

Mtt Cannon

2018-Apr-06 12:57 UTC

head link

[asterisk-users] Asterisk / PRI and Outbound Overlap Dialing

Thanks Richard, That did the trick. I had the 'overlapdial=yes' line
farther down in the chan_dahdi.conf file. Moving up before the channel line
worked.

Appreciate the help.

matt

On Thu, Apr 5, 2018 at 12:37 PM Richard Mudgett <rmudgett at digium.com>
wrote:
> On Thu, Apr 5, 2018 at 7:20 AM, Mtt Cannon <mcannon9180 at gmail.com>
wrote:
>
>>
>>
>> I am trying to setup Asterisk to act like a PBX connected via a PRI
>> gateway to a voice netowrk where Asterisk is doing outbound
>> overlap dialing for calls that terminate via that PRI. AFter
researching
>> through the archives and online dcocs, I thought I had
>> everyting setup right, dialplan configured for '_X!' and the
>> 'overlapdial=yes' in the chan_dahdi.conf file, but when I try
and
>> make a call, while the first digit triggers the outbound SETUP message,
>> that SETUP message always includes a 'Sending Complete'
>> parameter and any subsequent digits received from the originaing client
>> seem to be getting ignored as opposed to sent over in
>> subsequent ISDN INFORMATION messages.
>>
>> Any idea what I might be missing here...i did restart both DAHDI and
>> Asterisk after making the changes to support overlap.
>>
>> Logs and snippets are below..
>>
>> Thanks
>> matt
>>
>>
>> localhost*CLI> core show version
>> Asterisk 15.2.0 built by root @ localhost.localdomain on a x86_64
running
>> Linux on 2018-02-21 19:10:36 UTC
>>
>>
>> chan_dahdi.conf
>>
>> ; Overlap dialing mode (sending overlap digits)
>> ; Cannot be changed on a reload.
>> ;
>> ; incoming: incoming direction only
>> ; outgoing: outgoing direction only
>> ; no: neither direction
>> ; yes or both: both directions
>> ;
>> overlapdial=yes
>>
>
> Where is this option set in the chan_dahdi.conf file?  To have any effect
> on a particular channel the option
> MUST be set before the channel line that creates the channel.
>
> [channels]
> context=incoming
> switchtype=euroisdn
> signaling=pri_cpe
> overlapdial=yes
>
> ; All options currently set are used to create the specified channels on
> the next line.
> channel=1-15,17-31
> ; Any options set AFTER the channel line above DO NOT affect those
> channels.
>
> context=other
>
> Richard
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20180406/1a4029bf/attachment.html>

Reasonably Related Threads

Search for more seemingly similar threads

asterisk users - Apr 2018 - Asterisk / PRI and Outbound Overlap Dialing

[asterisk-users] Asterisk / PRI and Outbound Overlap Dialing

[asterisk-users] Asterisk / PRI and Outbound Overlap Dialing

[asterisk-users] Asterisk / PRI and Outbound Overlap Dialing

Reasonably Related Threads