/*! \brief Wait up to 16 seconds for first digit (FXO logic) */
static int firstdigittimeout =3D 16000;
/*! \brief How long to wait for following digits (FXO logic) */
static int gendigittimeout =3D 8000;
/*! \brief How long to wait for an extra digit, if there is an ambiguous match
*/
static int matchdigittimeout =3D 3000;
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Justin Killen
Sent: Wednesday, July 10, 2013 3:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] analog phone digit delay
So then, by saying "If the digits already dialed match an extension in the
dialplan...wait 3 seconds...", then we're saying that asterisk has
found a match, and the match is the bad-extension. Here is the bad-number
context that is included:
=20
[bad-number]
include =3D> bad-number-custom
exten =3D> _X.,1,Noop(bad-number, timeouts: absolute: ${TIMEOUT(absolute)}
digit: ${TIMEOUT(digit)} response: ${TIMEOUT(response)})
exten =3D> _X.,n,ResetCDR()
exten =3D> _X.,n,NoCDR()
exten =3D> _X.,n,Progress
exten =3D> _X.,n,Wait(1)
exten =3D> _X.,n,Progress
exten =3D>
_X.,n,Playback(silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer)
exten =3D> _X.,n,Wait(1)
exten =3D> _X.,n,Congestion(20)
exten =3D> _X.,n,Hangup
=20
=20
=20
So then, what you're saying then is that if I was to remove this include,
there would be no match in the dialplan and asterisk will wait for 8 seconds
instead of 3? The next question then is how to accomplish this without using
the wildcard (and how to change it in freepbx).
=20
-Justin=20
________________________________
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Richard Mudgett
Sent: Wednesday, July 10, 2013 10:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] analog phone digit delay
=20
=20
=20
On Mon, Jul 8, 2013 at 12:14 PM, Justin Killen <jkillen at
allamericanasphalt.com> wrote:
I have an installation that has analog phones connected via T1 channel banks.
I'm getting complaints from users that they will enter a partial number (eg
91213), then turn away to get the next few digits, and the system will start
dialing before they have a chance to put in the rest of the dialing string. Is
there a way to increase this delay? The only use these 4 dialing patterns:
=20
Internal 3 digit numbers
91 XXX XXX XXXX (for backwards compatibility)
9 XXX XXXX (also for compatibility)
XXX XXXX
=20
The simple switch in chan_dahdi has two hardcoded timeout times for more digits.
1) If the digits already dialed match an extension in the dialplan but could
match another extension if more digits are dialed then chan_dahdi will wait 3
seconds for more digits to arrive.
2) If the digits already dialed do not match any extension in the dialplan but
more digits could match an extension then chan_dahdi will wait 8 seconds for
more digits.
The shorter timeout is so the caller won't have to wait too long if the
caller intends to call the shorter dialplan extension.
You need to look at the extension patterns in your dialplan to see where you
have ambiguity between extensions. Are you using the '.' wildcard?
=20
Richard
=20
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
