thr3ads.net - openssh unix dev - FWD: [patch] scp + UTF-8 [Jan 2016]

If this information is useful, please help other people find it:
Share via:

Ingo Schwarze

2016-Jan-19 21:48 UTC

FWD: [patch] scp + UTF-8

Hi,

Martijn sent the following patch to me in private and agreed that i post
it here.

In any other program in OpenBSD base, i'd probably agree with the
basic approach.  Regarding OpenSSH, however, i worry whether wcwidth(3)
can be used.  While wcwidth(3) is POSIX, it is not ISO C.  Does
OpenSSH target platforms that don't provide wcwidth(3)?  If so,
do you think the problem can be solved by simply providing US-ASCII
support only on such platforms, but no UTF-8 support at all?

If you think we can require wcwidth(3), or we can ditch UTF-8 support
where wcwidth(3) it isn't available, i will work with Martijn to
iron out a few style issues such that we can submit a patch that
is ready for commit.

If you think we cannot require wcwidth(3) but need UTF-8 support
everywhere, i suggest to postpone this until we get djm@'s ssh(1)
banner patch in.  I sent some feedback on that earlier, proposing
to use a whitelist rather than the blacklist proposed by djm@ which
seems dangerous to me.  Should i integrate that suggestion into Damien's
patch, repost the modified patch, and then continue review?  I suspect
there might be one or two other things that could be improved, but i'm
not quite sure yet.

Once that is in, we can do something similar for wcwidth(3).

Yours,
  Ingo

P.S.
This patch also uses mbtowc(3), but i assume that's no problem
because that's ANSI C.

----- Forwarded message from Martijn van Duren -----

From: Martijn van Duren
Date: Sun, 17 Jan 2016 11:13:01 +0100
To: Ingo Schwarze <schwarze at usta.de>
Subject: [patch] scp + UTF-8

[...]

I've tested this under the following conditions:
- It lines out the same way the current scp does for ascii.
- when shrinking the terminal it prints just as much characters
  (width) of the filename as ascii would.
- To support terminals larger then MAX_WINSIZE and still be properly
  indented I increased the buf size to 4x the size of MAX_WINSIZE,
  since the maximum size of an UTF-8 char <should> be 4 bytes.
  It's quite a lot more memory, but I reckon it's better then the
  horrible indentation we have now.

I primarily developed this with scp and only minimally tested it with
sftp, but it should work with both.  sftp already called setlocale,
so no patch is needed for sftp.c.

[...]

Index: progressmeter.c
==================================================================RCS file:
/cvs/src/usr.bin/ssh/progressmeter.c,v
retrieving revision 1.41
diff -u -p -r1.41 progressmeter.c
--- progressmeter.c	14 Jan 2015 13:54:13 -0000	1.41
+++ progressmeter.c	17 Jan 2016 09:07:51 -0000
@@ -30,9 +30,11 @@
 #include <errno.h>
 #include <signal.h>
 #include <stdio.h>
+#include <stdlib.h>
 #include <string.h>
 #include <time.h>
 #include <unistd.h>
+#include <wchar.h>
 
 #include "progressmeter.h"
 #include "atomicio.h"
@@ -117,7 +119,7 @@ format_size(char *buf, int size, off_t b
 void
 refresh_progress_meter(void)
 {
-	char buf[MAX_WINSIZE + 1];
+	char buf[(MAX_WINSIZE * 4) + 1];
 	time_t now;
 	off_t transferred;
 	double elapsed;
@@ -125,8 +127,10 @@ refresh_progress_meter(void)
 	off_t bytes_left;
 	int cur_speed;
 	int hours, minutes, seconds;
-	int i, len;
-	int file_len;
+	int width, size, buf_width, buf_size;
+	int i;
+	int file_width;
+	wchar_t wc;
 
 	transferred = *counter - (cur_pos ? cur_pos : start_pos);
 	cur_pos = *counter;
@@ -157,16 +161,33 @@ refresh_progress_meter(void)
 
 	/* filename */
 	buf[0] = '\0';
-	file_len = win_size - 35;
-	if (file_len > 0) {
-		len = snprintf(buf, file_len + 1, "\r%s", file);
-		if (len < 0)
-			len = 0;
-		if (len >= file_len + 1)
-			len = file_len;
-		for (i = len; i < file_len; i++)
-			buf[i] = ' ';
-		buf[file_len] = '\0';
+	file_width = win_size - 36;
+	if (file_width > 0) {
+		buf[0] = '\r';
+		for (i = 0, buf_width = 0, buf_size = 1;
+		    file[i] != '\0';) {
+			if ((size = mbtowc(&wc, &(file[i]), MB_CUR_MAX)) == -1) {
+				(void)mbtowc(NULL, NULL, MB_CUR_MAX);
+				buf[buf_size++] = '?';
+				buf_width++;
+				i++;
+			} else if ((width = wcwidth(wc)) == -1) {
+				buf[buf_size++] = '?';
+				buf_width++;
+				i++;
+			} else if (buf_width + width <= file_width &&
+			    buf_size + size <= (int) sizeof(buf) - 35) {
+				memcpy(&(buf[buf_size]), &(file[i]), size);
+				i += size;
+				buf_size += size;
+				buf_width += width;
+			} else
+				break;
+		}
+		for (; buf_width < file_width &&
+		    buf_size < (int) sizeof(buf) - 35; buf_width++)
+			buf[buf_size++] = ' ';
+		buf[buf_size] = '\0';
 	}
 
 	/* percent of transfer done */
@@ -174,18 +195,18 @@ refresh_progress_meter(void)
 		percent = ((float)cur_pos / end_pos) * 100;
 	else
 		percent = 100;
-	snprintf(buf + strlen(buf), win_size - strlen(buf),
+	snprintf(buf + strlen(buf), sizeof(buf) - strlen(buf),
 	    " %3d%% ", percent);
 
 	/* amount transferred */
-	format_size(buf + strlen(buf), win_size - strlen(buf),
+	format_size(buf + strlen(buf), sizeof(buf) - strlen(buf),
 	    cur_pos);
-	strlcat(buf, " ", win_size);
+	strlcat(buf, " ", sizeof(buf));
 
 	/* bandwidth usage */
-	format_rate(buf + strlen(buf), win_size - strlen(buf),
+	format_rate(buf + strlen(buf), sizeof(buf) - strlen(buf),
 	    (off_t)bytes_per_second);
-	strlcat(buf, "/s ", win_size);
+	strlcat(buf, "/s ", sizeof(buf));
 
 	/* ETA */
 	if (!transferred)
@@ -194,9 +215,9 @@ refresh_progress_meter(void)
 		stalled = 0;
 
 	if (stalled >= STALL_TIME)
-		strlcat(buf, "- stalled -", win_size);
+		strlcat(buf, "- stalled -", sizeof(buf));
 	else if (bytes_per_second == 0 && bytes_left)
-		strlcat(buf, "  --:-- ETA", win_size);
+		strlcat(buf, "  --:-- ETA", sizeof(buf));
 	else {
 		if (bytes_left > 0)
 			seconds = bytes_left / bytes_per_second;
@@ -209,19 +230,21 @@ refresh_progress_meter(void)
 		seconds -= minutes * 60;
 
 		if (hours != 0)
-			snprintf(buf + strlen(buf), win_size - strlen(buf),
+			snprintf(buf + strlen(buf),
+			    sizeof(buf) - strlen(buf),
 			    "%d:%02d:%02d", hours, minutes, seconds);
 		else
-			snprintf(buf + strlen(buf), win_size - strlen(buf),
+			snprintf(buf + strlen(buf),
+			    sizeof(buf) - strlen(buf),
 			    "  %02d:%02d", minutes, seconds);
 
 		if (bytes_left > 0)
-			strlcat(buf, " ETA", win_size);
+			strlcat(buf, " ETA", sizeof(buf));
 		else
-			strlcat(buf, "    ", win_size);
+			strlcat(buf, "    ", sizeof(buf));
 	}
 
-	atomicio(vwrite, STDOUT_FILENO, buf, win_size - 1);
+	atomicio(vwrite, STDOUT_FILENO, buf, strlen(buf));
 	last_update = now;
 }
 
Index: scp.c
==================================================================RCS file:
/cvs/src/usr.bin/ssh/scp.c,v
retrieving revision 1.184
diff -u -p -r1.184 scp.c
--- scp.c	27 Nov 2015 00:49:31 -0000	1.184
+++ scp.c	17 Jan 2016 09:07:52 -0000
@@ -83,6 +83,7 @@
 #include <dirent.h>
 #include <errno.h>
 #include <fcntl.h>
+#include <locale.h>
 #include <pwd.h>
 #include <signal.h>
 #include <stdarg.h>
@@ -501,6 +502,8 @@ main(int argc, char **argv)
 	    targetshouldbedirectory ? " -d" : "");
 
 	(void) signal(SIGPIPE, lostconn);
+
+	(void) setlocale(LC_CTYPE, "");
 
 	if ((targ = colon(argv[argc - 1])))	/* Dest is remote host. */
 		toremote(targ, argc, argv);

----- End forwarded message -----

Darren Tucker

2016-Jan-19 22:39 UTC

head link

[patch] scp + UTF-8

On Wed, Jan 20, 2016 at 8:48 AM, Ingo Schwarze <schwarze at usta.de>
wrote:> Hi,
>
> Martijn sent the following patch to me in private and agreed that i post
> it here.
>
> In any other program in OpenBSD base, i'd probably agree with the
> basic approach.  Regarding OpenSSH, however, i worry whether wcwidth(3)
> can be used.  While wcwidth(3) is POSIX, it is not ISO C.  Does
> OpenSSH target platforms that don't provide wcwidth(3)?
OpenSSH nominally targets POSIX, but it builds on a wide enough range
of platforms that it's likely at least some don't have it.

Our general approach is to target POSIX then implement any needed
missing bits either by stealing the implementation from OpenBSD, some
other BSD licensed source or writing from scratch.  If we have to
we'll ifdef stuff but prefer not to.
> If so,
> do you think the problem can be solved by simply providing US-ASCII
> support only on such platforms, but no UTF-8 support at all?
Yes.  That's what I did with mblen when we picked up a need for that
via libedit for platforms with no wide character support.

$ grep -i mblen openbsd-compat/*.h
openbsd-compat/openbsd-compat.h:#ifndef HAVE_MBLEN
openbsd-compat/openbsd-compat.h:# define mblen(x, y)  (1)

Is there any reason the same approach would not work with wcwidth?

[...]> P.S.
> This patch also uses mbtowc(3), but i assume that's no problem
> because that's ANSI C.
I would not assume that its existence in the standard is equal to its
existence in all deployments :-)  That said it looks like we can
implement it in libcompat if needed.

-- 
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4  37C9 C982 80C7 8FF4 FA69
    Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.

Ingo Schwarze

2016-Jan-19 23:54 UTC

head link

[patch] scp + UTF-8

Hi Darren,

Darren Tucker wrote on Wed, Jan 20, 2016 at 09:39:33AM
+1100:> On Wed, Jan 20, 2016 at 8:48 AM, Ingo Schwarze <schwarze at usta.de>
wrote:
>> Martijn sent the following patch to me in private and agreed that i
>> post it here.
>>
>> In any other program in OpenBSD base, i'd probably agree with the
>> basic approach.  Regarding OpenSSH, however, i worry whether wcwidth(3)
>> can be used.  While wcwidth(3) is POSIX, it is not ISO C.  Does
>> OpenSSH target platforms that don't provide wcwidth(3)?
> OpenSSH nominally targets POSIX, but it builds on a wide enough range
> of platforms that it's likely at least some don't have it.
> 
> Our general approach is to target POSIX then implement any needed
> missing bits either by stealing the implementation from OpenBSD, some
> other BSD licensed source or writing from scratch.  If we have to
> we'll ifdef stuff but prefer not to.
Sure, that's what i expected.
>> If so, do you think the problem can be solved by simply providing
>> US-ASCII support only on such platforms, but no UTF-8 support at all?
> Yes.  That's what I did with mblen when we picked up a need for that
> via libedit for platforms with no wide character support.
> 
> $ grep -i mblen openbsd-compat/*.h
> openbsd-compat/openbsd-compat.h:#ifndef HAVE_MBLEN
> openbsd-compat/openbsd-compat.h:# define mblen(x, y)  (1)
Uh oh.  I'm not quite sure what consequences that might entail in
libedit for sftp(1), which does use setlocale(LC_CTYPE, "")?
Did you audit those consequences?
> Is there any reason the same approach would not work with wcwidth?
  #define wcwidth(x) (1)   /* NO!! */

would be a security risk.  One purpose of wcwidth(3) is to weed out
non-printable characters.  Whatever replacement we use, we have to
make sure it returns -1 for every non-printable character on every
platform.  We MUST NOT let the scp(1) progressmeter spew random
Unicode characters taken from the network at the user's terminal.
They might be control codes.

  #define wcwidth(x) (-1)   /* not really */

is not a security issue, but it would completely break filename
display even with the C/POSIX locale on those platforms.  I briefly
considered

  int
  wcwidth(wchar_t wc)   /* might break? */
  {
  	if (wc < 0x20 || wc > 0x7e)
		return -1;
	return isprint((unsigned char)wc) ? 1 : -1;
  }

But that isn't ideal either because as far as i know, ISO C
doesn't require that wchar_t is internally represented in a way
that puts ASCII in the range 0x00 to 0x7f.  Using iswprint(3)
is not a very good idea either because that is C99, not C89,
and may not be available either.

So if we can't get a real implementation of wcwidth(3) on some
platform, it's better to completely disable UTF-8 and only allow
US-ASCII.

A real replacement implementation of wcwidth(3) is MUCH harder
than a real replacement implementation of mbtowc(3) and mblen(3).
It needs a big table of character ranges (see tmux(1)), while
the latter can be done in 50 lines (see mandoc(1)).

That's why i said: If we want full UTF-8 support on all platforms
no matter what and must have a complete replacement wcwidth(3), we
should complete djm@'s character filtering first.
>> P.S.
>> This patch also uses mbtowc(3), but i assume that's no problem
>> because that's ANSI C.
> I would not assume that its existence in the standard is equal to its
> existence in all deployments :-)  That said it looks like we can
> implement it in libcompat if needed.
Yes, mbtowc(3) and mblen(3), certainly, but even those only for UTF-8,
not for any other locale.

Yours,
  Ingo

Roland Mainz

2016-Jan-20 00:13 UTC

head link

[patch] scp + UTF-8

On Tue, Jan 19, 2016 at 10:48 PM, Ingo Schwarze <schwarze at usta.de>
wrote:> Martijn sent the following patch to me in private and agreed that i post
> it here.
>
> In any other program in OpenBSD base, i'd probably agree with the
> basic approach.  Regarding OpenSSH, however, i worry whether wcwidth(3)
> can be used.  While wcwidth(3) is POSIX, it is not ISO C.  Does
> OpenSSH target platforms that don't provide wcwidth(3)?  If so,
> do you think the problem can be solved by simply providing US-ASCII
> support only on such platforms, but no UTF-8 support at all?
>
> If you think we can require wcwidth(3), or we can ditch UTF-8 support
> where wcwidth(3) it isn't available, i will work with Martijn to
> iron out a few style issues such that we can submit a patch that
> is ready for commit.
Some generic portability comments:
1. There are other modern encodings like GB18030 (support is even
mandatory for software sold to the goverment in PRC China) currently
in use and many "legacy" ones, so the current locale may be multibyte
but does not use UTF-8 as encoding
2. |wcwidth()| counts in terminal cells and not number of characters
(where one character might occupy one or more bytes), e.g. there are
characters which may occupy from zero to four terminal cells (acual
number of cells is a bit (not much) OS specific).
3. I am not sure whether there is a specific byte limit for UTF-8 in
any of the standards, e.g. "- To support terminals larger then
MAX_WINSIZE and still be properly indented I increased the buf size to
4x the size of MAX_WINSIZE, since the maximum size of an UTF-8 char
<should> be 4 bytes." might not be a portable assumption and I would
at least safeguard it.

----

Bye,
Roland

-- 
  __ .  . __
 (o.\ \/ /.o) roland.mainz at nrubsig.org
  \__\/\/__/  MPEG specialist, C&&JAVA&&Sun&&Unix
programmer
  /O /==\ O\  TEL +49 641 3992797
 (;O/ \/ \O;)

Ingo Schwarze

2016-Jan-20 01:05 UTC

head link

[patch] scp + UTF-8

Hi Roland,

Roland Mainz wrote on Wed, Jan 20, 2016 at 01:13:10AM +0100:
> Some generic portability comments:
> 1. There are other modern encodings like GB18030
Yes, but there are no plans to support any other encodings except
UTF-8 in the OpenBSD base system, so supporting other encodings
would be a matter for the portable version, if at all.  I will
consider whether it is possible to write multibyte character support
in a way that doesn't result in obfuscation (and hence loss of
security) on OpenBSD and yet supports other encodings elsewhere,
but i'm not yet sure that will be possible.  In case of the slightest
doubt, i expect OpenSSH developers will prioritize security over
additonal encoding support.
> (support is even mandatory for software sold to the goverment in
> PRC China)
I'm not aware of any plans to sell OpenSSH to the government of
China, but they are of course welcome to use it for free.
> 2. |wcwidth()| counts in terminal cells and not number of characters
> (where one character might occupy one or more bytes), e.g. there are
> characters which may occupy from zero to four terminal cells (acual
> number of cells is a bit (not much) OS specific).
I never heard about any characters occupying more than three cells.
As far as i know, the result of wcwidth(3) is not specified by the
Unicode standard, so i'm usually looking at the Perl implementation
as a reference.  Last time i looked there, i didn't find any actual
characters occupying more than two cells, even though characters
of width three might in principle be possible.
> 3. I am not sure whether there is a specific byte limit for UTF-8
> in any of the standards,
Yes, current Unicode limits codepoints to U+0000 to U+10FFFF, which
limits UTF-8 to one to four bytes.  But five and six byte UTF-8
sequences were considered in the past, so you are right that we
should make sure that nothing breaks if some system has bogus
support for those.
> e.g. "- To support terminals larger then MAX_WINSIZE and still be
> properly indented I increased the buf size to 4x the size
> of MAX_WINSIZE, since the maximum size of an UTF-8 char <should>
> be 4 bytes." might not be a portable assumption and I would
> at least safeguard it.
Yes, thank you for your comments, i have taken notes in my TODO file
to check that they will not be forgotten when reviewing future patches.
In particular the last one is quite important:

 * scp(1) comments by Roland Mainz:
   try to make things work even with non-UTF-8 outside OpenBSD, if easy
   make sure nothing breaks for wcwidth(...) > 2
   make sure nothing breaks for MB_CUR_MAX > 4

Yours,
  Ingo

Michael Stone

2016-Jan-20 12:50 UTC

head link

[patch] scp + UTF-8

On Wed, Jan 20, 2016 at 01:13:10AM +0100, Roland Mainz
wrote:>3. I am not sure whether there is a specific byte limit for UTF-8 in
>any of the standards, e.g. "- To support terminals larger then
>MAX_WINSIZE and still be properly indented I increased the buf size to
>4x the size of MAX_WINSIZE, since the maximum size of an UTF-8 char
><should> be 4 bytes." might not be a portable assumption and I
would
>at least safeguard it.
Isn't that assumption completely broken in the presence of combining 
characters?

Mike Stone

Damien Miller

2016-Jan-27 08:05 UTC

head link

FWD: [patch] scp + UTF-8

POSIX is fine, but why not prepare a filtered version of the filename
once instead of doing it on every output?

On Tue, 19 Jan 2016, Ingo Schwarze wrote:
> Hi,
> 
> Martijn sent the following patch to me in private and agreed that i post
> it here.
> 
> In any other program in OpenBSD base, i'd probably agree with the
> basic approach.  Regarding OpenSSH, however, i worry whether wcwidth(3)
> can be used.  While wcwidth(3) is POSIX, it is not ISO C.  Does
> OpenSSH target platforms that don't provide wcwidth(3)?  If so,
> do you think the problem can be solved by simply providing US-ASCII
> support only on such platforms, but no UTF-8 support at all?
> 
> If you think we can require wcwidth(3), or we can ditch UTF-8 support
> where wcwidth(3) it isn't available, i will work with Martijn to
> iron out a few style issues such that we can submit a patch that
> is ready for commit.
> 
> If you think we cannot require wcwidth(3) but need UTF-8 support
> everywhere, i suggest to postpone this until we get djm@'s ssh(1)
> banner patch in.  I sent some feedback on that earlier, proposing
> to use a whitelist rather than the blacklist proposed by djm@ which
> seems dangerous to me.  Should i integrate that suggestion into
Damien's
> patch, repost the modified patch, and then continue review?  I suspect
> there might be one or two other things that could be improved, but i'm
> not quite sure yet.
> 
> Once that is in, we can do something similar for wcwidth(3).
> 
> Yours,
>   Ingo
> 
> P.S.
> This patch also uses mbtowc(3), but i assume that's no problem
> because that's ANSI C.
> 
> ----- Forwarded message from Martijn van Duren -----
> 
> From: Martijn van Duren
> Date: Sun, 17 Jan 2016 11:13:01 +0100
> To: Ingo Schwarze <schwarze at usta.de>
> Subject: [patch] scp + UTF-8
> 
> [...]
> 
> I've tested this under the following conditions:
> - It lines out the same way the current scp does for ascii.
> - when shrinking the terminal it prints just as much characters
>   (width) of the filename as ascii would.
> - To support terminals larger then MAX_WINSIZE and still be properly
>   indented I increased the buf size to 4x the size of MAX_WINSIZE,
>   since the maximum size of an UTF-8 char <should> be 4 bytes.
>   It's quite a lot more memory, but I reckon it's better then the
>   horrible indentation we have now.
> 
> I primarily developed this with scp and only minimally tested it with
> sftp, but it should work with both.  sftp already called setlocale,
> so no patch is needed for sftp.c.
> 
> [...]
> 
> Index: progressmeter.c
> ==================================================================> RCS
file: /cvs/src/usr.bin/ssh/progressmeter.c,v
> retrieving revision 1.41
> diff -u -p -r1.41 progressmeter.c
> --- progressmeter.c	14 Jan 2015 13:54:13 -0000	1.41
> +++ progressmeter.c	17 Jan 2016 09:07:51 -0000
> @@ -30,9 +30,11 @@
>  #include <errno.h>
>  #include <signal.h>
>  #include <stdio.h>
> +#include <stdlib.h>
>  #include <string.h>
>  #include <time.h>
>  #include <unistd.h>
> +#include <wchar.h>
>  
>  #include "progressmeter.h"
>  #include "atomicio.h"
> @@ -117,7 +119,7 @@ format_size(char *buf, int size, off_t b
>  void
>  refresh_progress_meter(void)
>  {
> -	char buf[MAX_WINSIZE + 1];
> +	char buf[(MAX_WINSIZE * 4) + 1];
>  	time_t now;
>  	off_t transferred;
>  	double elapsed;
> @@ -125,8 +127,10 @@ refresh_progress_meter(void)
>  	off_t bytes_left;
>  	int cur_speed;
>  	int hours, minutes, seconds;
> -	int i, len;
> -	int file_len;
> +	int width, size, buf_width, buf_size;
> +	int i;
> +	int file_width;
> +	wchar_t wc;
>  
>  	transferred = *counter - (cur_pos ? cur_pos : start_pos);
>  	cur_pos = *counter;
> @@ -157,16 +161,33 @@ refresh_progress_meter(void)
>  
>  	/* filename */
>  	buf[0] = '\0';
> -	file_len = win_size - 35;
> -	if (file_len > 0) {
> -		len = snprintf(buf, file_len + 1, "\r%s", file);
> -		if (len < 0)
> -			len = 0;
> -		if (len >= file_len + 1)
> -			len = file_len;
> -		for (i = len; i < file_len; i++)
> -			buf[i] = ' ';
> -		buf[file_len] = '\0';
> +	file_width = win_size - 36;
> +	if (file_width > 0) {
> +		buf[0] = '\r';
> +		for (i = 0, buf_width = 0, buf_size = 1;
> +		    file[i] != '\0';) {
> +			if ((size = mbtowc(&wc, &(file[i]), MB_CUR_MAX)) == -1) {
> +				(void)mbtowc(NULL, NULL, MB_CUR_MAX);
> +				buf[buf_size++] = '?';
> +				buf_width++;
> +				i++;
> +			} else if ((width = wcwidth(wc)) == -1) {
> +				buf[buf_size++] = '?';
> +				buf_width++;
> +				i++;
> +			} else if (buf_width + width <= file_width &&
> +			    buf_size + size <= (int) sizeof(buf) - 35) {
> +				memcpy(&(buf[buf_size]), &(file[i]), size);
> +				i += size;
> +				buf_size += size;
> +				buf_width += width;
> +			} else
> +				break;
> +		}
> +		for (; buf_width < file_width &&
> +		    buf_size < (int) sizeof(buf) - 35; buf_width++)
> +			buf[buf_size++] = ' ';
> +		buf[buf_size] = '\0';
>  	}
>  
>  	/* percent of transfer done */
> @@ -174,18 +195,18 @@ refresh_progress_meter(void)
>  		percent = ((float)cur_pos / end_pos) * 100;
>  	else
>  		percent = 100;
> -	snprintf(buf + strlen(buf), win_size - strlen(buf),
> +	snprintf(buf + strlen(buf), sizeof(buf) - strlen(buf),
>  	    " %3d%% ", percent);
>  
>  	/* amount transferred */
> -	format_size(buf + strlen(buf), win_size - strlen(buf),
> +	format_size(buf + strlen(buf), sizeof(buf) - strlen(buf),
>  	    cur_pos);
> -	strlcat(buf, " ", win_size);
> +	strlcat(buf, " ", sizeof(buf));
>  
>  	/* bandwidth usage */
> -	format_rate(buf + strlen(buf), win_size - strlen(buf),
> +	format_rate(buf + strlen(buf), sizeof(buf) - strlen(buf),
>  	    (off_t)bytes_per_second);
> -	strlcat(buf, "/s ", win_size);
> +	strlcat(buf, "/s ", sizeof(buf));
>  
>  	/* ETA */
>  	if (!transferred)
> @@ -194,9 +215,9 @@ refresh_progress_meter(void)
>  		stalled = 0;
>  
>  	if (stalled >= STALL_TIME)
> -		strlcat(buf, "- stalled -", win_size);
> +		strlcat(buf, "- stalled -", sizeof(buf));
>  	else if (bytes_per_second == 0 && bytes_left)
> -		strlcat(buf, "  --:-- ETA", win_size);
> +		strlcat(buf, "  --:-- ETA", sizeof(buf));
>  	else {
>  		if (bytes_left > 0)
>  			seconds = bytes_left / bytes_per_second;
> @@ -209,19 +230,21 @@ refresh_progress_meter(void)
>  		seconds -= minutes * 60;
>  
>  		if (hours != 0)
> -			snprintf(buf + strlen(buf), win_size - strlen(buf),
> +			snprintf(buf + strlen(buf),
> +			    sizeof(buf) - strlen(buf),
>  			    "%d:%02d:%02d", hours, minutes, seconds);
>  		else
> -			snprintf(buf + strlen(buf), win_size - strlen(buf),
> +			snprintf(buf + strlen(buf),
> +			    sizeof(buf) - strlen(buf),
>  			    "  %02d:%02d", minutes, seconds);
>  
>  		if (bytes_left > 0)
> -			strlcat(buf, " ETA", win_size);
> +			strlcat(buf, " ETA", sizeof(buf));
>  		else
> -			strlcat(buf, "    ", win_size);
> +			strlcat(buf, "    ", sizeof(buf));
>  	}
>  
> -	atomicio(vwrite, STDOUT_FILENO, buf, win_size - 1);
> +	atomicio(vwrite, STDOUT_FILENO, buf, strlen(buf));
>  	last_update = now;
>  }
>  
> Index: scp.c
> ==================================================================> RCS
file: /cvs/src/usr.bin/ssh/scp.c,v
> retrieving revision 1.184
> diff -u -p -r1.184 scp.c
> --- scp.c	27 Nov 2015 00:49:31 -0000	1.184
> +++ scp.c	17 Jan 2016 09:07:52 -0000
> @@ -83,6 +83,7 @@
>  #include <dirent.h>
>  #include <errno.h>
>  #include <fcntl.h>
> +#include <locale.h>
>  #include <pwd.h>
>  #include <signal.h>
>  #include <stdarg.h>
> @@ -501,6 +502,8 @@ main(int argc, char **argv)
>  	    targetshouldbedirectory ? " -d" : "");
>  
>  	(void) signal(SIGPIPE, lostconn);
> +
> +	(void) setlocale(LC_CTYPE, "");
>  
>  	if ((targ = colon(argv[argc - 1])))	/* Dest is remote host. */
>  		toremote(targ, argc, argv);
> 
> ----- End forwarded message -----
> _______________________________________________
> openssh-unix-dev mailing list
> openssh-unix-dev at mindrot.org
> https://lists.mindrot.org/mailman/listinfo/openssh-unix-dev
>

Maybe Matching Threads

Search for more maybe matching threads

openssh unix dev - Jan 2016 - FWD: [patch] scp + UTF-8

FWD: [patch] scp + UTF-8

[patch] scp + UTF-8

[patch] scp + UTF-8

[patch] scp + UTF-8

[patch] scp + UTF-8

[patch] scp + UTF-8

FWD: [patch] scp + UTF-8

Maybe Matching Threads