Nicolai Hähnle via llvm-dev
2018-Aug-22 15:41 UTC
[llvm-dev] Condition code in DAGCombiner::visitFADDForFMACombine?
On 22.08.2018 13:29, Ryan Taylor wrote:> The example starts as SPIR-V with the NoContraction decoration flag on > the fmul. > > I think what you are saying seems valid in that if the user had put the > flag on the fadd instead of the fmul it would not contract and so in > this example the user needs to put the NoContraction on the fadd though > I'm not sure that's a good expectation of the user. On the surface, I > think that if an operation didn't have the contract flag than it > wouldn't be contracted, regardless of what flags any other operation has.Okay, I see that the SPIR-V spec specifically calls out this example. Unless there are conflicting requirements with another frontend, I'd say we should make sure LLVM is aligned with SPIR-V here. Something along the lines of (in LangRef): ``contract`` Allow floating-point contraction (e.g. fusing a multiply followed by an addition into a fused multiply-and-add). This flag must be present on all affected instruction. And we should probably say the same about ``reassoc`` as well. Cheers, Nicolai> > On Wed, Aug 22, 2018 at 3:55 AM Nicolai Hähnle via llvm-dev > <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: > > On 21.08.2018 16:08, Ryan Taylor via llvm-dev wrote: > > So I have a test case where: > > > > %20 = fmul nnan arcp float %15, %19 > > %21 = fadd reassoc nnan arcp contract float %20, -1.000000e+00 > > > > is being contracted in DAG to fmad. Is this correct since the > fmul has > > no reassoc or contract fast math flag? > > By having the reassoc and contract flags on fadd, the frontend is > essentially saying "different rounding on the value produced by the > fadd > is okay". > > So I'd say contracting this to fma is correct. > > Where does this code come from, and why do you think contracting to fma > is wrong? > > Cheers, > Nicolai > > > > > > > > Thanks. > > > > On Mon, Aug 20, 2018 at 12:56 PM Ryan Taylor <ryta1203 at gmail.com > <mailto:ryta1203 at gmail.com> > > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com>>> wrote: > > > > I'm curious why the condition to fuse is this: > > > > // Floating-point multiply-add with intermediate rounding. > > bool HasFMAD = (LegalOperations && > > TLI.isOperationLegal(ISD::FMAD, VT)); > > > > static bool isContractable(SDNode *N) { > > SDNodeFlags F = N->getFlags(); > > return F.hasAllowContract() || F.hasAllowReassociation(); > > } > > > > bool CanFuse = Options.UnsafeFPMath || isContractable(N); > > bool AllowFusionGlobally = (Options.AllowFPOpFusion => > FPOpFusion::Fast || CanFuse || HasFMAD); > > // If the addition is not contractable, do not combine. > > if (!AllowFusionGlobally && !isContractable(N)) > > return SDValue(); > > > > Specifically the AllowFusionGlobally, I would have expected > > something more like: > > > > bool AllowFusionGlobally = (Options.AllowFPOpFusion => > FPOpFusion::Fast && CanFuse && HasFMAD); > > > > or at the very least: > > > > bool AllowFusionGlobally = ((Options.AllowFPOpFusion => > FPOpFusion::Fast || CanFuse) && HasFMAD); > > > > It seems that as long as the target can do fmad it does do fmad > > since HasFMAD is true. > > > > Thanks. > > > > > > > > > > > > _______________________________________________ > > LLVM Developers mailing list > > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > -- > Lerne, wie die Welt wirklich ist, > Aber vergiss niemals, wie sie sein sollte. > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >-- Lerne, wie die Welt wirklich ist, Aber vergiss niemals, wie sie sein sollte.
Ryan Taylor via llvm-dev
2018-Aug-22 15:52 UTC
[llvm-dev] Condition code in DAGCombiner::visitFADDForFMACombine?
This is probably going to effect on other backends and break llvm-lit for them? On Wed, Aug 22, 2018 at 11:41 AM Nicolai Hähnle <nhaehnle at gmail.com> wrote:> On 22.08.2018 13:29, Ryan Taylor wrote: > > The example starts as SPIR-V with the NoContraction decoration flag on > > the fmul. > > > > I think what you are saying seems valid in that if the user had put the > > flag on the fadd instead of the fmul it would not contract and so in > > this example the user needs to put the NoContraction on the fadd though > > I'm not sure that's a good expectation of the user. On the surface, I > > think that if an operation didn't have the contract flag than it > > wouldn't be contracted, regardless of what flags any other operation has. > > Okay, I see that the SPIR-V spec specifically calls out this example. > > Unless there are conflicting requirements with another frontend, I'd say > we should make sure LLVM is aligned with SPIR-V here. Something along > the lines of (in LangRef): > > ``contract`` > Allow floating-point contraction (e.g. fusing a multiply followed by > an addition into a fused multiply-and-add). This flag must be present > on all affected instruction. > > And we should probably say the same about ``reassoc`` as well. > > Cheers, > Nicolai > > > > > > > > On Wed, Aug 22, 2018 at 3:55 AM Nicolai Hähnle via llvm-dev > > <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: > > > > On 21.08.2018 16:08, Ryan Taylor via llvm-dev wrote: > > > So I have a test case where: > > > > > > %20 = fmul nnan arcp float %15, %19 > > > %21 = fadd reassoc nnan arcp contract float %20, -1.000000e+00 > > > > > > is being contracted in DAG to fmad. Is this correct since the > > fmul has > > > no reassoc or contract fast math flag? > > > > By having the reassoc and contract flags on fadd, the frontend is > > essentially saying "different rounding on the value produced by the > > fadd > > is okay". > > > > So I'd say contracting this to fma is correct. > > > > Where does this code come from, and why do you think contracting to > fma > > is wrong? > > > > Cheers, > > Nicolai > > > > > > > > > > > > > > Thanks. > > > > > > On Mon, Aug 20, 2018 at 12:56 PM Ryan Taylor <ryta1203 at gmail.com > > <mailto:ryta1203 at gmail.com> > > > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com>>> wrote: > > > > > > I'm curious why the condition to fuse is this: > > > > > > // Floating-point multiply-add with intermediate rounding. > > > bool HasFMAD = (LegalOperations && > > > TLI.isOperationLegal(ISD::FMAD, VT)); > > > > > > static bool isContractable(SDNode *N) { > > > SDNodeFlags F = N->getFlags(); > > > return F.hasAllowContract() || F.hasAllowReassociation(); > > > } > > > > > > bool CanFuse = Options.UnsafeFPMath || isContractable(N); > > > bool AllowFusionGlobally = (Options.AllowFPOpFusion => > > FPOpFusion::Fast || CanFuse || HasFMAD); > > > // If the addition is not contractable, do not combine. > > > if (!AllowFusionGlobally && !isContractable(N)) > > > return SDValue(); > > > > > > Specifically the AllowFusionGlobally, I would have expected > > > something more like: > > > > > > bool AllowFusionGlobally = (Options.AllowFPOpFusion => > > FPOpFusion::Fast && CanFuse && HasFMAD); > > > > > > or at the very least: > > > > > > bool AllowFusionGlobally = ((Options.AllowFPOpFusion => > > FPOpFusion::Fast || CanFuse) && HasFMAD); > > > > > > It seems that as long as the target can do fmad it does do > fmad > > > since HasFMAD is true. > > > > > > Thanks. > > > > > > > > > > > > > > > > > > _______________________________________________ > > > LLVM Developers mailing list > > > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > > > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > > > > > -- > > Lerne, wie die Welt wirklich ist, > > Aber vergiss niemals, wie sie sein sollte. > > _______________________________________________ > > LLVM Developers mailing list > > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > -- > Lerne, wie die Welt wirklich ist, > Aber vergiss niemals, wie sie sein sollte. >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20180822/1b71ed7c/attachment.html>
Nicolai Hähnle via llvm-dev
2018-Aug-22 20:33 UTC
[llvm-dev] Condition code in DAGCombiner::visitFADDForFMACombine?
On 22.08.2018 17:52, Ryan Taylor wrote:> This is probably going to effect on other backends and break llvm-lit > for them?Very likely, yes. Can you take a look at how big the fallout is? This might give us a hint about what other frontends might expect, and who needs to be involved in the discussion (if one is needed). Cheers, Nicolai> > On Wed, Aug 22, 2018 at 11:41 AM Nicolai Hähnle <nhaehnle at gmail.com > <mailto:nhaehnle at gmail.com>> wrote: > > On 22.08.2018 13:29, Ryan Taylor wrote: > > The example starts as SPIR-V with the NoContraction decoration > flag on > > the fmul. > > > > I think what you are saying seems valid in that if the user had > put the > > flag on the fadd instead of the fmul it would not contract and so in > > this example the user needs to put the NoContraction on the fadd > though > > I'm not sure that's a good expectation of the user. On the > surface, I > > think that if an operation didn't have the contract flag than it > > wouldn't be contracted, regardless of what flags any other > operation has. > > Okay, I see that the SPIR-V spec specifically calls out this example. > > Unless there are conflicting requirements with another frontend, I'd > say > we should make sure LLVM is aligned with SPIR-V here. Something along > the lines of (in LangRef): > > ``contract`` > Allow floating-point contraction (e.g. fusing a multiply > followed by > an addition into a fused multiply-and-add). This flag must be > present > on all affected instruction. > > And we should probably say the same about ``reassoc`` as well. > > Cheers, > Nicolai > > > > > > > > On Wed, Aug 22, 2018 at 3:55 AM Nicolai Hähnle via llvm-dev > > <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > <mailto:llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>>> > wrote: > > > > On 21.08.2018 16:08, Ryan Taylor via llvm-dev wrote: > > > So I have a test case where: > > > > > > %20 = fmul nnan arcp float %15, %19 > > > %21 = fadd reassoc nnan arcp contract float %20, -1.000000e+00 > > > > > > is being contracted in DAG to fmad. Is this correct since the > > fmul has > > > no reassoc or contract fast math flag? > > > > By having the reassoc and contract flags on fadd, the frontend is > > essentially saying "different rounding on the value produced > by the > > fadd > > is okay". > > > > So I'd say contracting this to fma is correct. > > > > Where does this code come from, and why do you think > contracting to fma > > is wrong? > > > > Cheers, > > Nicolai > > > > > > > > > > > > > > Thanks. > > > > > > On Mon, Aug 20, 2018 at 12:56 PM Ryan Taylor > <ryta1203 at gmail.com <mailto:ryta1203 at gmail.com> > > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com>> > > > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com> > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com>>>> wrote: > > > > > > I'm curious why the condition to fuse is this: > > > > > > // Floating-point multiply-add with intermediate rounding. > > > bool HasFMAD = (LegalOperations && > > > TLI.isOperationLegal(ISD::FMAD, VT)); > > > > > > static bool isContractable(SDNode *N) { > > > SDNodeFlags F = N->getFlags(); > > > return F.hasAllowContract() || > F.hasAllowReassociation(); > > > } > > > > > > bool CanFuse = Options.UnsafeFPMath || isContractable(N); > > > bool AllowFusionGlobally = (Options.AllowFPOpFusion => > > FPOpFusion::Fast || CanFuse || HasFMAD); > > > // If the addition is not contractable, do not combine. > > > if (!AllowFusionGlobally && !isContractable(N)) > > > return SDValue(); > > > > > > Specifically the AllowFusionGlobally, I would have > expected > > > something more like: > > > > > > bool AllowFusionGlobally = (Options.AllowFPOpFusion => > > FPOpFusion::Fast && CanFuse && HasFMAD); > > > > > > or at the very least: > > > > > > bool AllowFusionGlobally = ((Options.AllowFPOpFusion => > > FPOpFusion::Fast || CanFuse) && HasFMAD); > > > > > > It seems that as long as the target can do fmad it > does do fmad > > > since HasFMAD is true. > > > > > > Thanks. > > > > > > > > > > > > > > > > > > _______________________________________________ > > > LLVM Developers mailing list > > > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > <mailto:llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> > > > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > > > > > -- > > Lerne, wie die Welt wirklich ist, > > Aber vergiss niemals, wie sie sein sollte. > > _______________________________________________ > > LLVM Developers mailing list > > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > <mailto:llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> > > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > -- > Lerne, wie die Welt wirklich ist, > Aber vergiss niemals, wie sie sein sollte. >-- Lerne, wie die Welt wirklich ist, Aber vergiss niemals, wie sie sein sollte.
Sanjay Patel via llvm-dev
2018-Aug-23 17:36 UTC
[llvm-dev] Condition code in DAGCombiner::visitFADDForFMACombine?
If we have this: r = (X * Y) + Z And we want that to become an fma op/node, 'contract' is checked on the fadd because it is the fadd that's being altered to form the (possibly non-standard) result. As I think was noted earlier, whether 'contract' is set on the fmul is irrelevant in our current implementation. This allows the scenario where a strict fmul was inlined into code with looser FP semantics, and we're still free to create an fma. If the end value allows non-standard behavior, then we assume that intermediate ops leading up to that end value can use non-standard behavior too. (cc'ing Michael Berg who did a lot of the DAG FMF work recently) I'm not familiar with SPIR-V, but it sounds like it has an inverse flag system to what we have in IR and DAG - ops are presumed contract-able unless specified with 'no-contract'? Not sure how to resolve that. If we want to change the LLVM FMF semantics, then there will be breakage in the IR optimizer too (at least for 'reassoc'; not sure about 'contract'). Either way, I agree that we should try to clarify the LangRef about this because you can't tell how things are supposed to work from the current description. On Wed, Aug 22, 2018 at 9:41 AM, Nicolai Hähnle via llvm-dev < llvm-dev at lists.llvm.org> wrote:> On 22.08.2018 13:29, Ryan Taylor wrote: > >> The example starts as SPIR-V with the NoContraction decoration flag on >> the fmul. >> >> I think what you are saying seems valid in that if the user had put the >> flag on the fadd instead of the fmul it would not contract and so in this >> example the user needs to put the NoContraction on the fadd though I'm not >> sure that's a good expectation of the user. On the surface, I think that if >> an operation didn't have the contract flag than it wouldn't be contracted, >> regardless of what flags any other operation has. >> > > Okay, I see that the SPIR-V spec specifically calls out this example. > > Unless there are conflicting requirements with another frontend, I'd say > we should make sure LLVM is aligned with SPIR-V here. Something along the > lines of (in LangRef): > > ``contract`` > Allow floating-point contraction (e.g. fusing a multiply followed by > an addition into a fused multiply-and-add). This flag must be present > on all affected instruction. > > And we should probably say the same about ``reassoc`` as well. > > Cheers, > Nicolai > > > > > >> On Wed, Aug 22, 2018 at 3:55 AM Nicolai Hähnle via llvm-dev < >> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: >> >> On 21.08.2018 16:08, Ryan Taylor via llvm-dev wrote: >> > So I have a test case where: >> > >> > %20 = fmul nnan arcp float %15, %19 >> > %21 = fadd reassoc nnan arcp contract float %20, -1.000000e+00 >> > >> > is being contracted in DAG to fmad. Is this correct since the >> fmul has >> > no reassoc or contract fast math flag? >> >> By having the reassoc and contract flags on fadd, the frontend is >> essentially saying "different rounding on the value produced by the >> fadd >> is okay". >> >> So I'd say contracting this to fma is correct. >> >> Where does this code come from, and why do you think contracting to >> fma >> is wrong? >> >> Cheers, >> Nicolai >> >> >> >> >> > >> > Thanks. >> > >> > On Mon, Aug 20, 2018 at 12:56 PM Ryan Taylor <ryta1203 at gmail.com >> <mailto:ryta1203 at gmail.com> >> > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com>>> wrote: >> > >> > I'm curious why the condition to fuse is this: >> > >> > // Floating-point multiply-add with intermediate rounding. >> > bool HasFMAD = (LegalOperations && >> > TLI.isOperationLegal(ISD::FMAD, VT)); >> > >> > static bool isContractable(SDNode *N) { >> > SDNodeFlags F = N->getFlags(); >> > return F.hasAllowContract() || F.hasAllowReassociation(); >> > } >> > >> > bool CanFuse = Options.UnsafeFPMath || isContractable(N); >> > bool AllowFusionGlobally = (Options.AllowFPOpFusion =>> > FPOpFusion::Fast || CanFuse || HasFMAD); >> > // If the addition is not contractable, do not combine. >> > if (!AllowFusionGlobally && !isContractable(N)) >> > return SDValue(); >> > >> > Specifically the AllowFusionGlobally, I would have expected >> > something more like: >> > >> > bool AllowFusionGlobally = (Options.AllowFPOpFusion =>> > FPOpFusion::Fast && CanFuse && HasFMAD); >> > >> > or at the very least: >> > >> > bool AllowFusionGlobally = ((Options.AllowFPOpFusion =>> > FPOpFusion::Fast || CanFuse) && HasFMAD); >> > >> > It seems that as long as the target can do fmad it does do fmad >> > since HasFMAD is true. >> > >> > Thanks. >> > >> > >> > >> > >> > >> > _______________________________________________ >> > LLVM Developers mailing list >> > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >> > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >> > >> >> >> -- Lerne, wie die Welt wirklich ist, >> Aber vergiss niemals, wie sie sein sollte. >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >> >> > > -- > Lerne, wie die Welt wirklich ist, > Aber vergiss niemals, wie sie sein sollte. > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20180823/30157621/attachment.html>
Ryan Taylor via llvm-dev
2018-Aug-23 17:51 UTC
[llvm-dev] Condition code in DAGCombiner::visitFADDForFMACombine?
Maybe there is a cleaner solution but it seems like adding a 'nocontract' flag is close to the intention of spir-v and is an easy check in the DAGCombiner without breaking anything else and its intentions are very clear. Right now the DAGCombiner logic doesn't seem to be able to handle the case of having fast math globally with instruction level flags to turn off fast math. Right now, either fast math is global and it's assumed everything can be contracted or fast math is not global and we contract if the contract flag is present on the current instruction. I could be missing something. -Ryan On Thu, Aug 23, 2018 at 1:36 PM Sanjay Patel <spatel at rotateright.com> wrote:> If we have this: > r = (X * Y) + Z > > And we want that to become an fma op/node, 'contract' is checked on the > fadd because it is the fadd that's being altered to form the (possibly > non-standard) result. As I think was noted earlier, whether 'contract' is > set on the fmul is irrelevant in our current implementation. This allows > the scenario where a strict fmul was inlined into code with looser FP > semantics, and we're still free to create an fma. If the end value allows > non-standard behavior, then we assume that intermediate ops leading up to > that end value can use non-standard behavior too. (cc'ing Michael Berg who > did a lot of the DAG FMF work recently) > > I'm not familiar with SPIR-V, but it sounds like it has an inverse flag > system to what we have in IR and DAG - ops are presumed contract-able > unless specified with 'no-contract'? Not sure how to resolve that. > > If we want to change the LLVM FMF semantics, then there will be breakage > in the IR optimizer too (at least for 'reassoc'; not sure about > 'contract'). Either way, I agree that we should try to clarify the LangRef > about this because you can't tell how things are supposed to work from the > current description. > > > On Wed, Aug 22, 2018 at 9:41 AM, Nicolai Hähnle via llvm-dev < > llvm-dev at lists.llvm.org> wrote: > >> On 22.08.2018 13:29, Ryan Taylor wrote: >> >>> The example starts as SPIR-V with the NoContraction decoration flag on >>> the fmul. >>> >>> I think what you are saying seems valid in that if the user had put the >>> flag on the fadd instead of the fmul it would not contract and so in this >>> example the user needs to put the NoContraction on the fadd though I'm not >>> sure that's a good expectation of the user. On the surface, I think that if >>> an operation didn't have the contract flag than it wouldn't be contracted, >>> regardless of what flags any other operation has. >>> >> >> Okay, I see that the SPIR-V spec specifically calls out this example. >> >> Unless there are conflicting requirements with another frontend, I'd say >> we should make sure LLVM is aligned with SPIR-V here. Something along the >> lines of (in LangRef): >> >> ``contract`` >> Allow floating-point contraction (e.g. fusing a multiply followed by >> an addition into a fused multiply-and-add). This flag must be present >> on all affected instruction. >> >> And we should probably say the same about ``reassoc`` as well. >> >> Cheers, >> Nicolai >> >> >> >> >> >>> On Wed, Aug 22, 2018 at 3:55 AM Nicolai Hähnle via llvm-dev < >>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: >>> >>> On 21.08.2018 16:08, Ryan Taylor via llvm-dev wrote: >>> > So I have a test case where: >>> > >>> > %20 = fmul nnan arcp float %15, %19 >>> > %21 = fadd reassoc nnan arcp contract float %20, -1.000000e+00 >>> > >>> > is being contracted in DAG to fmad. Is this correct since the >>> fmul has >>> > no reassoc or contract fast math flag? >>> >>> By having the reassoc and contract flags on fadd, the frontend is >>> essentially saying "different rounding on the value produced by the >>> fadd >>> is okay". >>> >>> So I'd say contracting this to fma is correct. >>> >>> Where does this code come from, and why do you think contracting to >>> fma >>> is wrong? >>> >>> Cheers, >>> Nicolai >>> >>> >>> >>> >>> > >>> > Thanks. >>> > >>> > On Mon, Aug 20, 2018 at 12:56 PM Ryan Taylor <ryta1203 at gmail.com >>> <mailto:ryta1203 at gmail.com> >>> > <mailto:ryta1203 at gmail.com <mailto:ryta1203 at gmail.com>>> wrote: >>> > >>> > I'm curious why the condition to fuse is this: >>> > >>> > // Floating-point multiply-add with intermediate rounding. >>> > bool HasFMAD = (LegalOperations && >>> > TLI.isOperationLegal(ISD::FMAD, VT)); >>> > >>> > static bool isContractable(SDNode *N) { >>> > SDNodeFlags F = N->getFlags(); >>> > return F.hasAllowContract() || F.hasAllowReassociation(); >>> > } >>> > >>> > bool CanFuse = Options.UnsafeFPMath || isContractable(N); >>> > bool AllowFusionGlobally = (Options.AllowFPOpFusion =>>> > FPOpFusion::Fast || CanFuse || HasFMAD); >>> > // If the addition is not contractable, do not combine. >>> > if (!AllowFusionGlobally && !isContractable(N)) >>> > return SDValue(); >>> > >>> > Specifically the AllowFusionGlobally, I would have expected >>> > something more like: >>> > >>> > bool AllowFusionGlobally = (Options.AllowFPOpFusion =>>> > FPOpFusion::Fast && CanFuse && HasFMAD); >>> > >>> > or at the very least: >>> > >>> > bool AllowFusionGlobally = ((Options.AllowFPOpFusion =>>> > FPOpFusion::Fast || CanFuse) && HasFMAD); >>> > >>> > It seems that as long as the target can do fmad it does do >>> fmad >>> > since HasFMAD is true. >>> > >>> > Thanks. >>> > >>> > >>> > >>> > >>> > >>> > _______________________________________________ >>> > LLVM Developers mailing list >>> > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >>> > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >>> > >>> >>> >>> -- Lerne, wie die Welt wirklich ist, >>> Aber vergiss niemals, wie sie sein sollte. >>> _______________________________________________ >>> LLVM Developers mailing list >>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >>> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >>> >>> >> >> -- >> Lerne, wie die Welt wirklich ist, >> Aber vergiss niemals, wie sie sein sollte. >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org >> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20180823/f5999048/attachment.html>
Possibly Parallel Threads
- Condition code in DAGCombiner::visitFADDForFMACombine?
- Condition code in DAGCombiner::visitFADDForFMACombine?
- Condition code in DAGCombiner::visitFADDForFMACombine?
- Condition code in DAGCombiner::visitFADDForFMACombine?
- Condition code in DAGCombiner::visitFADDForFMACombine?