Roy Spliet
2015-Feb-06  21:46 UTC
[Nouveau] [PATCH 1/3] nv50/ir: Add support for MAD 4-byte opcode
Add emission rules for negative and saturate flags for MAD 4-byte opcodes,
and get rid of some of the constraints. Obviously tested with a wide variety
of shaders.
V2: Document MAD as supported short form
V3: Split up IMM from short-form modifiers
Signed-off-by: Roy Spliet <rspliet at eclipso.eu>
---
 src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp   | 10 ++++------
 src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp |  4 ++--
 2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
b/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
index 2077388..23e4bab 100644
--- a/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
+++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
@@ -941,7 +941,10 @@ CodeEmitterNV50::emitFMAD(const Instruction *i)
 
    if (i->encSize == 4) {
       emitForm_MUL(i);
-      assert(!neg_mul && !neg_add);
+      code[0] |= neg_mul << 15;
+      code[0] |= neg_add << 22;
+      if (i->saturate)
+         code[0] |= 1 << 8;
    } else {
       code[1]  = neg_mul << 26;
       code[1] |= neg_add << 27;
@@ -1931,11 +1934,6 @@ CodeEmitterNV50::getMinEncodingSize(const Instruction *i)
const
 
    // check constraints on short MAD
    if (info.srcNr >= 2 && i->srcExists(2)) {
-      if (i->saturate || i->src(2).mod)
-         return 8;
-      if ((i->src(0).mod ^ i->src(1).mod) ||
-          (i->src(0).mod | i->src(1).mod).abs())
-         return 8;
       if (!i->defExists(0) ||
           i->def(0).rep()->reg.data.id !=
i->src(2).rep()->reg.data.id)
          return 8;
diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
index 48f996b..178a167 100644
--- a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
+++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
@@ -117,8 +117,8 @@ void TargetNV50::initOpInfo()
    };
    static const uint32_t shortForm[(OP_LAST + 31) / 32]     {
-      // MOV,ADD,SUB,MUL,SAD,L/PINTERP,RCP,TEX,TXF
-      0x00010e40, 0x00000040, 0x00000498, 0x00000000
+      // MOV,ADD,SUB,MUL,MAD,SAD,L/PINTERP,RCP,TEX,TXF
+      0x00014e40, 0x00000040, 0x00000498, 0x00000000
    };
    static const operation noDestList[]     {
-- 
2.1.0
Roy Spliet
2015-Feb-06  21:46 UTC
[Nouveau] [PATCH 2/3] nv50/ir: Add emit support for MAD IMM format
But don't enable generation of it in the opProperties, because we can't
guarantee the SDST==SRC2 constraint until after register assignment. We'll
add a post-RA folding pass to utilise this.
Signed-off-by: Roy Spliet <rspliet at eclipso.eu>
---
 src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp | 8 ++++++++
 1 file changed, 8 insertions(+)
diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
b/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
index 23e4bab..b1e7409 100644
--- a/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
+++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_nv50.cpp
@@ -939,6 +939,14 @@ CodeEmitterNV50::emitFMAD(const Instruction *i)
 
    code[0] = 0xe0000000;
 
+   if (i->src(1).getFile() == FILE_IMMEDIATE) {
+      code[1] = 0;
+      emitForm_IMM(i);
+      code[0] |= neg_mul << 15;
+      code[0] |= neg_add << 22;
+      if (i->saturate)
+         code[0] |= 1 << 8;
+   } else
    if (i->encSize == 4) {
       emitForm_MUL(i);
       code[0] |= neg_mul << 15;
-- 
2.1.0
Add a specific optimisation pass for NV50 to check whether SRC0 or SRC1 is
a MOV dst, IMM. If so: fold the IMM in and try to drop the MOV. Must be
done post-RA because it requires that SDST == SSRC2.
V2: improve readability and add comments to clarify decisions
V3: Remove redundant code... compiler already attempts to put the IMM in
SSRC1
Signed-off-by: Roy Spliet <rspliet at eclipso.eu>
Reviewed-by: Ilia Mirkin <imirkin at alum.mit.edu>
---
 .../drivers/nouveau/codegen/nv50_ir_peephole.cpp   | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)
diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir_peephole.cpp
b/src/gallium/drivers/nouveau/codegen/nv50_ir_peephole.cpp
index 21d20ca..62d2ef7 100644
--- a/src/gallium/drivers/nouveau/codegen/nv50_ir_peephole.cpp
+++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_peephole.cpp
@@ -2259,6 +2259,56 @@ FlatteningPass::tryPredicateConditional(BasicBlock *bb)
 
 // ============================================================================
+// Fold Immediate into MAD; must be done after register allocation due to
+// constraint SDST == SSRC2
+// TODO:
+// Does NVC0+ have other situations where this pass makes sense?
+class NV50PostRaConstantFolding : public Pass
+{
+private:
+   virtual bool visit(BasicBlock *);
+};
+
+bool
+NV50PostRaConstantFolding::visit(BasicBlock *bb)
+{
+   Value *vtmp;
+   Instruction *def;
+
+   for (Instruction *i = bb->getFirst(); i; i = i->next) {
+      switch (i->op) {
+      case OP_MAD:
+         if (i->def(0).getFile() != FILE_GPR ||
+             i->src(0).getFile() != FILE_GPR ||
+             i->src(1).getFile() != FILE_GPR ||
+             i->src(2).getFile() != FILE_GPR ||
+             i->getDef(0)->reg.data.id !=
i->getSrc(2)->reg.data.id)
+            break;
+
+         def = i->getSrc(1)->getInsn();
+         if (def->op == OP_MOV && def->src(0).getFile() ==
FILE_IMMEDIATE) {
+            vtmp = i->getSrc(1);
+            i->setSrc(1, def->getSrc(0));
+
+            /* There's no post-RA dead code elimination, so do it here
+             * XXX: if we add more code-removing post-RA passes, we might
+             *      want to create a post-RA dead-code elim pass */
+            if (vtmp->refCount() == 0)
+               delete_Instruction(bb->getProgram(), def);
+
+            break;
+         }
+         break;
+      default:
+         break;
+      }
+   }
+
+   return true;
+}
+
+//
============================================================================+
 // Common subexpression elimination. Stupid O^2 implementation.
 class LocalCSE : public Pass
 {
@@ -2629,6 +2679,9 @@ bool
 Program::optimizePostRA(int level)
 {
    RUN_PASS(2, FlatteningPass, run);
+   if (getTarget()->getChipset() < 0xc0)
+      RUN_PASS(2, NV50PostRaConstantFolding, run);
+
    return true;
 }
 
-- 
2.1.0
Apparently Analagous Threads
- [PATCH 1/2] nv50/ir: Add support for MAD short+IMM notation
 - [PATCH 1/3] nv50/ir: Add support for MAD short+IMM notation
 - nv50/ir: Implement short notation for MAD V2
 - [PATCH 1/3] nv50/ir: Add support for MAD short+IMM notation
 - [PATCH 1/3] nv50/ir: Add support for MAD short+IMM notation