-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
ATI 6.8 pre-release
This is the long awaited radeon driver with randr 1.2 support.
radeon 6.7 was pretty much a dead end, so it's been branched for those that
still want to play with it. In addition to randr support there are quite a
few other goodies: zero copy tfp, improved connector table parsing, TV-out
support, and much more.
Changes since 6.6.3:
Adam Jackson (1):
Undo unintended configure.ac change.
airlied (9):
split mode handling code into separate modes source file
forgot SetPitch function is called
radeon: initial move framebuffer away from zero prep.
fixup EXA after previous commit
make DDC function more generic
add generic mode handling code from Intel driver
add more functions from i830 driver
make radeon modes use generic code
move radeon over to not using X's mode management like the intel
driver.
Alain P?teut (1):
enable i2c for PCI_CHIP_RV250_If. allows AIW fuctionality to work.
Alex Deucher (165):
radeon: restructure files along lines of Alex's superpatch
radeon: add missing tv-out registers to register list
radeon: add pre init controller function
radeon: add save/restore of some new registers
radeon: move to using Alex's controller structure
radeon: make DVI_I default connector
radeon: add reverse display option to switch displays on
non-mobility cards
radeon: re-organise FP and CRTC register setting routines
tvdac handling was reversed between r200 and other chips
fix LVDS plus internal TMDS
remove bogus registers
FP timing regs required for both internal and external TMDS
Remove Bioshotkeys option. Leave the bios as configured at boot.
Remove paneloff option. This is already covered by monitorlayout and
Rework the output init code. Divide into separate functions
Disable all ouputs on initial mode set. The ones we want will get
clean up magic number
Don't mess with the VIP bus on mobility chips. Seems to cause fan
clean up previous VIP commit.
update man page. fixes bug 6457
I think we can say r300 support is not experimental
add option to force the DRI on for RN50 chips
Add "DRI" option
fix NULL dereference
RADEON - update randr cursor handling, LVDS setup fix
RADEON: Fix cursor handling for randr
remove some old mergedfb cruft
minor cleanup
start to clean up MapControllers
More re-org to allow more than 2 outputs
enable all outputs on each crtc on mode restore
more randr re-work
randr checkpoint
RADEON: randr driver re-org checkpoint
RADEON: fix VT switch
RADEON: more re-org
RADEON: re-arrange output mode setting
RADEON: switch output dpms to use RADEONEnableDisplay()
RADEON: Move LVDS, TMDS, DAC properties to the output rec
RADEON: Fix RMX after the last commit
RADEON: remove hardcoded output limit and PortInfo stuff
RADEON: don't need to pass pScrn to EnableDisplay()
RADEON: fix up DDCConnected()
RADEON: move crtc offset handling into init/save/restore functions
RADEON: fix VT switch
RADEON: several fixes
RADEON: Remove dead code
RADEON: re-org randr code
RADEON: remove more dead code
RADEON: remove old mergedfb and dualhead options that are no longer used
RADEON: remove mergedfb, etc. cruft from man page
RADEON: add new ConnectorTable option and re-add PanelSize option
RADEON: additional cleanups
RADEON: remove remnants of "old" multi-head support
RADEON: Further cleanup
RADEON: Lots of small fixes
RADEON: Move DAC regs to their own Save() function
RADEON: remove some debugging code
RADEON: More cleanup
RADEON: turn off all outputs in screeninit(). We'll turn on the
ones we want later
RADEON: more cleanup
RADEON: cleanup
RADEON: Change default LVDS i2c line for powerpc
RADEON: if connector is VGA set TMDS to none
Fix regular/"xinerama"/zaphod dualhead mode
update to 6.6.192 for rc release
RADEON: several updates
RADEON: fix crtc1 (un)blanking code after last commit
RADEON: Only add valid connectors
RADEON: add output properties (not functional yet)
RADEON: clean up some logic
RADEON: clean up non-DDC probe, add detect for DVI
RADEON: fixup last commit and add support for ext TMDS detect
RADEON: more clean of last commits
RADEON: implement auto/analog/digital output property for DVI-I (untested)
RADEON: implement backlight control for LVDS
RADEON: fix handling of DRI lock
RADEON: Make sure LVDS and FP2 routing info gets written
RADEON: make sure we have the lock when SYNCing
RADEON: Switch SetOutputType() to use names rather than numbers
RADEON: clean up and add comment regarding clones
RADEON: first pass at rotation (not working yet)
RADEON: more rotation work (still not there)
RADEON: remove some dead code from the last commit
RADEON: number the outputs if there are more than one of the same
RADEON: remove some cruft
RADEON: add support for RMX on DVI, make sure RMX is only enabled on crtc1
RADEON: no need to go through all the crtcs, we've got what we need
RADEON: fix indenting
RADEON: fixup RADEONDisplayVideo() to better handle the crtc being used
RADEON: implement support for posting cards based on x86 bios
tables (untested)
RADEON: fix some issues with bios table init code
RADEON: make sure RADEON_LVDS_ON is cleared when turning LVDS off
RADEON: make sure to clear RADEON_LVDS_ON when turning LVDS off
RADEON: additional LVDS off fix (missed in previous commit)
RADEON: additional LVDS off fix (missed in previous commit)
RADEON: yet another LVDS...
RADEON: only touch LVDS on mobility chips
RADEON: only touch LVDS on mobility chips
RADEON: Split FP reg restore to only touch regs relevant to the output
RADEON: bump crtc max to 1200 so 1600x1200 will work out of the box
RADEON: tiling and FB size fixes
RADEON: fix possible segfault on mobility chips with MM tables
RADEON: fix possible segfault on mobility chips with MM tables
RADEON: attempt to fix cursor on big endian (only tested on x86)
RADEON: make sure we set the stride properly
RADEON: make sure we unblank in RADEONRestore()
RADEON: Switch cursor back to memcpy()
RADEON: set info->CurrentLayout.displayWidth in RADEONSetPitch()
RADEON: fix corruption after 3D apps run
RADEON: move crtc base setups to new functions
RADEON: factor out surface_cntl init into one function
RADEON: simplify console restore
RADEON: save crtc on/off state for console restore
RADEON: Fix tiling on r1xx and r2xx
RADEON: set default values for crtc_offset_cntls
R128: don't clip modes to panel on laptops when only using the CRT
port
RADEON: fix palette when depth != 24
RADEON: fix randr on r4xx
RADEON: hack around console restore hang on r4xx
RADEON: write out saved vclk and pixclk values
RADEON: Compute PLL VCO gain
RADEON: Initial pass at integrated tv out support
RADEON: add info about tv out code and authorship
RADEON: tv-out fixes. works now. tested on rv350.
RADEON: fix name of tv output
RADEON: more fixes...
RADEON: convert hard coded tv out values to calculations
RADEON: remove unused elements
RADEON: limit tv modes to the only one we can program at the moment
RADEON: move tv dac enable to enabledisplay()
RADEON: add missing break
RADEON: fix tv-out enable/disable
RADEON: avoid a divide by 0 and only save tv out regs if the chip has them
RADEON: Change indexing of TV constants table in preparation for
standard re-work
RADEON: Major rework of BIOS table parsing
RADEON: attempt to do the right thing for standards other than PAL or NTSC
RADEON: refactor output init to handle multiple DVI or VGA
RADEON: Fix DVI-I support in ATOM bios connector table parsing
RADEON: fixes
RADEON: typo
RADEON: switch RMX attribute to string type
RADEON: make backlight attribute lower case
RADEON: switch DVI-I monitor type attribute to string
RADEON: add tv out properties
RADEON: Always set MonType in radeon_detect()
RADEON: minor fix to legacy bios connector table
RADEON: Make sure the default TV standard is supported
RADEON: fix ConnectorTable option after connector table re-work
RADEON: fix typo in comment
RADEON: fix connector setup when there's no bios tables
RADEON: order the VGA and DVI ports correctly
RADEON: Add load detection
RADEON: Make sure RMX is always programmed for crtc1
RADEON: Turn off tv encoder in disableoutputs()
RADEON: Implement improved tv load detection for r300
RADEON: minor cleanup
RADEON: make sure crtc routing is correct in r300_detect_tv()
RADEON: Remove RADEONRestoreMode()
RADEON: fix Xv clipping and overlay sourcing
RADEON: turn off TVCLK when blanking tv encoder
RADEON: Add DefaultConnectorTable option
RADEON: fix tv-out on R3xx
RADEON: more tv out fixes and clean up
RADEON: Fix color problem on pre-R3xx chips tv-out
Andrew Randrianasulu (2):
RADEON: Fix VT switch hangs
RADEON: Fix VT switch hangs
Brice Goglin (2):
MACH64: avoid crash in Xv code
Minor fixes in the manpages
Daniel Stone (2):
Makefile.am: fix changelog hook
Makefile.am: re-add ChangeLog to CLEANFILES
Dave Airlie (125):
radeon: restore secondary head behaviour
radeon: re-add DAC power on/off code around detect
radeon: re-add ATI patch for rn50 modes
radeon: add tv dac adj lookup
radeon: move InitFPRegisters up to align with superpatch
radeon: initialise controller structures
radeon: minor cleanup of masking for crtc registers
radeon: copy of overupdated bios hotkeys code from Alex
radeon: fixup InitFPRegisters function call to not pass info
radeon: cleanup DacPowerSet
radeon: cleanup DPMS set on/off code to use new controller structure
radeon: move code around in InitCrtcRegisters
radeon; put back old TV DAC code for now
radeon: add enable display function
radeon: refactor blank/unblank
radeon: move comment
radeon: add simple map controllers call
radeon: add some info to the map controllers
radeon: flesh out mapcontrollers
radeon: some minor alignments and cleanups for info->
radeon: make GetConnectedMonitors a static void
radeon: change function name to Displays rather than Monitors
radeon: align some output with superpatch
radeon: align tabs and make display detection like superpatch
radeon: bring over final set of changes for radeon_display.c
from susperpatch
radeon: setup the radeon init function to use secondary
radeon: initial CRTC register setting alignment
radeon: finish radeon_driver.c import for register changes
radeon: add some missing bits of superpatch for crtc registers
radeon: put back in reverseddc code
remove all CVS annotations from the ATI driver files
radeon : add back tv-dac register write
radeon: cleanup some bits from superpatch
radeon: don't move connectors around if LVDS connector is connector 1
radeon: check DDC info for both connectors not just the pScrn one.
update version number to 6.6.99 in preparation for a 6.7 branch
at some stage
always turn on DAC for scanning the CRT connect.
radeon: set preferred modes
radeon: separate static controller setup from non-static
add initial controller binding, remove uses of mergedfb test
add radeon Init2 function, to abstract some mergedfb mode setting
radeon: abstract init display bandwidth from mergedfb
move HasCRTC2 to pRADEONEnt from info
make CRTCs malloc'ed rather than part of Ent
radeon: dynamically allocate connectors
move crtc to connector mapping to a connector to crtc mapping.
re-program bios 4 scratch so we know if the LCD panel is there
post startup
move monitor detection into single function
Add radeon randr 1.2 initial attempt at support
update radeon driver to Intel driver xf86Crtc interfaces
hook up randr crtc setting
bring over latest code from Intel git repo.
hook up mode detect to new randr code
remove some code that moved into server
fix up output namings
use getddcmodes properly
fix remnant of old code
fixup even more remnants of old code
add randr pre init
add displayWidth set
add setdpi call
radeon: don't touch Controller[1] on single CRTC cards.
radeon: fixup fastwrites to be always off
bring radeon randr code inline with intel randr code
more minor fixes to get radeon up to speed
make restore mode non-static
add more files for back compat
fixup some function calls
hook up detection of output
fix typo
hook up crtc modesetting
fix cursor handling
fix LUT
set binding for new heads
hook up DPMS through xf86
minor randr1.2 fixups
always create a second CRTC I think this should solve any problems
radeon: destroy and fixup LVDS crtc
disable dpms on/off as it was writing regs before we wanted to
radeon: move blank/unblank to use randr
use more randr-ish names for variables
radeon: get randr-1.2 mode switching mostly working on my laptop
comment out unblanking on VT switch
make dri work again
move some cursor code around for show/hide
remove mergedfb
remove alot more mergedfb support
add back overlay CRTC chooser this may not work yet
remove unused merged code
radeon: fixup some of the video code after randr
remove more mergedfb relics
removed even more mergedfb remains
remove isused and isactive
remove unused restore palette function
fix LVDS by moving bios reading around
radeon: move some i2c registers out into common register file
make radeon randr build against master server
cleanup radeon code against master server
fix typo
radeon: add option to set pci aperture size from config file
update number to 6.6.191 for rc release
radeon: fix up crtc debug dereference problem
radeon: add support for enabling direct rendering on RS480
radeon: fix build since patches for IBM don't actually build
radeon: fix build on older server
radeon: add support for DDC on some laptop chipsets
radeon: add support for DDC on some laptop chipsets
radeon: another attempt at fixing the mergedfb refresh rate
rs480: only has single dac
rs480: make second crtc work with magic number in magic register.
rs480: more unknown regs
radeon: add bios quirk for nx6125 monid
remove these syncs, at least on rs480 it doesn't break
randr-1.2: make native mode preferred
randr-1.2: add support for vblank on both heads
randr-1.2 increase dri minor version for mesa to know we can do
vbl on both
radeon: disable vbl interrupts when no 3d is running on a new enough drm
radeon: disable irqs at server start until 3D app starts
radeon: disable irqs at server start until 3D app starts
radeon: cleanup some pieces of the dpms/blank register programming
ati: add -Wall for gcc
radeon: remove unused variables
update configure.ac for 6.6.193 release
updated release numbering for randr 1.2
radeon: cleanup some warnings
David Airlie (14):
fix up issue with bindings and mergedfb
fixup init disp bandwidth
radeon: fixup problem with cursor not going off
radeon: always reset cursor regs
update to latest intel codebase modulo using their mode set
add locks for crtcs and some missing lines from intel update
fixup callers to crtcsetmode fixes my cursors
move i2c buses into outputs
bring over setproperty from intel code
fixup mode probing a bit neater
rename some variables to output from connector
get rid of mergetype and displaytype from radeon.h
remove all the locking glxgears runs fine over screen changes without it
remove assignments to pOutput before it is created
David Woodhouse (1):
Fix radeon vs fbdev pitch calculation.
Eamon Walsh (2):
Convert callers of LookupWindow() to dixLookupWindow().
Revert "Convert callers of LookupWindow() to dixLookupWindow()."
George Sapountzis (48):
Bug 6242: [mach64] Use private DMA buffers.
[mach64] Fix build for !defined(USE_EXA).
[mach64] EXA: reserve DRI buffers only when DRI is active.
Handle .99 in version patch level.
Officially require libdrm 2.2.0
[mach64] Use asynchronous DMA mode by default.
[mach64] Prefer double-buffered visuals for GLX.
Use portable XORG_RELEASE_VERSION macro.
Drop AVOID_NON_PCI.
Drop probing for VGA, VGAWonder, 8514, Mach32.
Keep PCI mach64 only (atipreinit.c, atimode.c), drop:
Keep PCI mach64 only, drop:
Clean pATI->Adapter and pATI->VGAAdapter.
We always use the accelerator CRTC within the xserver.
Always use the linear aperture.
Banked memory is no longer needed.
Drop support for non-programmable clocks.
Minor refactoring of module (un)loading for TV_OUT.
Drop checking of sparse I/O bases conflicts
Sane probe, based on work by Luc Verhaegen <libv at skynet.be>.
Add option "probe_sparse" to force probing sparse I/O bases.
Drop pATI->Chipset, no longer used.
Cleanup checks for pATI->PCIInfo.
Minor refactoring of pATI->Block0Base computation.
Drop non-PCI support from atividmem.c
Consolidate atiaccel.c w/ atimach64accel.c, part 1.
Consolidate atiaccel.c w/ atimach64accel.c, part 2.
Consolidate aticursor.c w/ atimach64cursor.c
Consolidate atixv.c w/ atimach64xv.c, part 1.
Consolidate atixv.c w/ atimach64xv.c, part 2.
[mach64] Enable RENDER acceleration on the Pro variants.
[mach64] PreInit: Use goto bail.
[mach64] PreInit: pitchInc is local.
[mach64] PreInit: maxPitch, minor cosmetic.
[mach64] Consolidate adjustments of mode timings, part 1.
[mach64] Consolidate adjustments of mode timings, part 2.
[mach64] Consolidate adjustments of mode timings, part 3.
[mach64] Xv: use single surface and encoding structs.
[mach64] Bug 5586: overlay scaler limited to 720 pixels on ATI Rage Pro.
Move atiprobe.c from ati to atimisc.
Move atioption.c from ati to atimisc.
Move {atimach64,r128,radeon}_probe.c from ati to subdrivers.
Drop now unneeded _X_EXPORT's.
Fold FillIn() back to Probe().
Drop probing by driver name from "Device" section.
[mach64] Set pATI->ChipRevision correctly, instead of overriding.
[mach64] Use Mach64Chipsets[] instead of ATIChipNames[].
Move atichip.c from ati to atimisc.
Henry Zhao (5):
fix bug 6966 (Henry Zhao, Shem Multinymous)
improved results for mergedfb xrandr refresh rates - bug 6966
9337: EDID modes do not participate in validation for CRT monitor
10205: Radeon driver's own mode validation code does not work properly
Update CRT2pScrn->monitor->Last to reflect the
iLisa Wu (1):
Fix crash with no valid mode in xorg.conf's modelist and empty Virtual
Jesse Barnes (6):
Update for new CRTC resize hooks.
Add prepare/commit hooks to output and crtc func table
- fix randr 1.2 on pre-RV350 chips by enabling DAC_MACRO_CNTL writes
RADEON:
RADEON:
Add cscope files to .gitignore
Lisa Wu (2):
RADEON: make sure RADEON_CRTC2_CRT2_ON bit state is properly accounted for
RADEON: fix console restore on r3xx and r4xx
Luc Verhaegen (2):
Clean up PortInfo to CRTC mapping
AGPFastWrite risk reduction.
Matthias Hopf (5):
Fixed typo in mode list generation.
Fix crash if MergedFB and secondary head not found
Fix inconsistent use of Mode lists.
Set sync polarity restriction flags even for non-"digital
separate" monitors.
Disable RMX for IBM Lewis server.
Matthieu Herrb (3):
Fix build without XF86DRI
Fix build without XF86DRI
Fix build whithout XF86DRI
Michel Daenzer (1):
Bug #6756: Attempt to fix repeat picture acceleration.
Michel D?nzer (40):
Remove some dead code.
radeon: Always call RADEONGetAccessibleVRAM().
radeon: Fix function name typo which could probably lead to an
unresolved symbol.
radeon: Add support for page flipping with EXA.
radeon: Don't try to synchronize pages when the CP isn't running.
radeon: Track screen damage all the time for page flipping.
radeon: Use xf86XVFillKeyHelperDrawable() when available.
radeon: Pitch doesn't matter when height == 1.
Fix compile warnings.
radeon: Bug #8989: Fix page flipping artifacts with XAA.
Fix build warning.
Increase default overlay scaler buffer width for RV350.
Make log file output clear about origin of used overlay scaler
buffer width.
Fix radeon compile warnings.
radeon: Make cache flushing for R300 series less invasive.
radeon: Move Xv option handling code into RADEONPreInitXv().
radeon: Default to leaving AGP transfer mode and fast writes unchanged.
radeon: Advertise 2D engine limits to EXA when we're not using
the 3D engine.
radeon: Fix build warnings.
atimisc: Fix strict aliasing violation flagged by -Wall.
radeon: Make sure 3D clients will re-upload textures to video
RAM after LeaveVT.
radeon: Disable CP line acceleration on RV280s.
radeon: Minor BlockHandler cleanups.
radeon: Unify code to release the CP.
radeon: Only sync to hardware when really necessary with EXA.
Fix advertised minimum minor version of the DRI module.
radeon: Fix typo.
radeon: Guard some MergedFB specific code with info->MergedFB tests.
radeon: Don't shrink virtual size based on secondary modes.
radeon: Always sort modes when adding to list.
radeon: Link nearest modes by default for clone mode.
radeon: Suppress debugging output by default.
radeon: HW cursor cleanup.
radeon: Provide new DRI texOffsetStart hook when available with EXA.
radeon: Lots of warning fixes.
radeon: Fix some more ErrorFs when setting mode.
radeon: Don't loop indefinitely if no mode matches detected panel
size.
radeon: Fix panel size detection from registers with stretched
mode programmed.
radeon: Fix panel size detection from registers with stretched
mode programmed.
radeon: Fully zero-initialize info->CRT2pScrn->monitor.
Paul TBBle Hampson (2):
Fix for infinite loop in RADEONGetLVDSInfo
RADEONProbePLLParameters sets pll->reference_div, and
Roland Scheidegger (9):
radeon: Check ROM more thoroughly before treating it as an x86 BIOS.
radeon: bug #1462, predownscale to make HD video work.
radeon: use overlay scaler native planar yuv capability.
radeon: fix up packed yuv broken by planar yuv patch
radeon: avoid unnecessary OUTPLL/INPLL calls when displaying video
fix uninitialized mode regs (bug 9495)
fix uninitialized mode regs (bug 9495)
fix alignment issues with planar yuv and a bug with packed uyvy
add missing part of last commit...
Ronald Wahl (1):
Hook up DFP power to DPMS events.
Tilman Sauerbeck (1):
Fixed 'make dist'.
Timo Jyrinki (1):
ati: fix detection of some newer radeons using ati wrapper
Tormod Volden (2):
RADEON: limit PanelPwrDly to 2000 ms on ATOM bios as per legacy bios
RADEON: limit PanelPwrDly to 2000 ms on ATOM bios as per legacy bios
git tag: xf86-video-ati-6.7.191
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.7.191.tar.bz2
MD5: f350217d7b56890ba714f0479866210f xf86-video-ati-6.7.191.tar.bz2
SHA1: 077b8bf872cdfc31e781b5c0f81bb8f17cc648dd xf86-video-ati-6.7.191.tar.bz2
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.7.191.tar.gz
MD5: a4fb5391d53cdf4388a745d16cebfaba xf86-video-ati-6.7.191.tar.gz
SHA1: 6fd4152b8f1ec506614bd92c978984914198ec21 xf86-video-ati-6.7.191.tar.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFGzQRbm07k+YR03kARArXeAKCR2IJTdGTmZ3OdhKYczcSw80fVxwCeNhth
OvnU0BazDBmWk34pRc2KGyc=90UE
-----END PGP SIGNATURE-----
