Orlov at vectorinfo.ru
2012-Dec-11 06:24 UTC
[Nut-upsuser] NUT (windows) 2.6.5-4 issues - SNMP data stale
Hello! All our UPSes is APC Smart UPS All OS: Windows 2003R2 (x32) and 2008R2 (x64). I installed a client 2.6.5-4 (latest from available) on many of our servers and ran into a 3 problems. 1) All communications between our clients and UPS made ??via SNMP (driver snmp-ups.exe) and right after client?s start I get in the windows log errors - UPS data stale. I have long studied the situation and made ??the following observation: 99% of the error "data stale" arises because of the fact that the driver snmp-ups.exe starts too long or NUT starting in WRONG sequence: upsd ? 1st, snmp-ups ? 2nd. But I think the snmp-ups driver must be started first. How can I make to FORCE NUT (for windows) to starts in right sequence (do not start upsd daemon BEFORE snmp-ups driver loading)? 2) I have a strong suspicion that the NUT does not always read the config files after host restarting. I have included the suppression of all connection error (IGNORE) and reconfigured common polling intervals from default POLLFREQ = 5, POLLFREQALERT = 5 and MAXAGE = 15 to new 30,15 and 60, respectively. But right after rebooting the host, I get in the server log reports for ?data stale?, and polling interval is NOT equal to 60 (as I adjusted for MAXAGE). It was used as the default -15 seconds. And And a similar situation with a pop-up notices: they are (like ?connection lost?) completely disabled, but they still appear from time to time (after system full restart) on the console. Can I modify windows NUT service and POINT it to config file? I am really sure, that the NUT clients and UPSes are communicate normally. It is only necessary to suppress logging of errors and pop-up notification. 3) If I try to stop NUT daemon on Windows 2003R2 server ? it throws me an error: Faulting application upsd.exe, version 0.0.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x0001a1c1. I think Windows 2008R2 is not affected by this error. And for information: latest windows build 2..6.5-4 has compiled with SSL support. I don?t need it, but I CAN NOT disable this option. I found it after sending test request like ?upsc.exe UPS1 ups.status?. Thank you! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121211/bdf1490b/attachment.html>
Orlov at vectorinfo.ru
2012-Dec-13 06:13 UTC
[Nut-upsuser] NUT (windows) 2.6.5-4 issues - SNMP data stale
Hello! All our UPSes is APC Smart UPS All OS: Windows 2003R2 (x32) and 2008R2 (x64). I installed a client 2.6.5-4 (latest from available) on many of our servers and ran into a 3 problems. 1) All communications between our clients and UPS made ??via SNMP (driver snmp-ups.exe) and right after client?s start I get in the windows log errors - UPS data stale. I have long studied the situation and made ??the following observation: 99% of the error "data stale" arises because of the fact that the driver snmp-ups.exe starts too long or NUT starting in WRONG sequence: upsd ? 1st, snmp-ups ? 2nd. But I think the snmp-ups driver must be started first. How can I make to FORCE NUT (for windows) to starts in right sequence (do not start upsd daemon BEFORE snmp-ups driver loading)? 2) I have a strong suspicion that the NUT does not always read the config files after host restarting. I have included the suppression of all connection error (IGNORE) and reconfigured common polling intervals from default POLLFREQ = 5, POLLFREQALERT = 5 and MAXAGE = 15 to new 30,15 and 60, respectively. But right after rebooting the host, I get in the server log reports for ?data stale?, and polling interval is NOT equal to 60 (as I adjusted for MAXAGE). It was used as the default -15 seconds. And And a similar situation with a pop-up notices: they are (like ?connection lost?) completely disabled, but they still appear from time to time (after system full restart) on the console. Can I modify windows NUT service and POINT it to config file? I am really sure, that the NUT clients and UPSes are communicate normally. It is only necessary to suppress logging of errors and pop-up notification. 3) If I try to stop NUT daemon on Windows 2003R2 server ? it throws me an error: Faulting application upsd.exe, version 0.0.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x0001a1c1. I think Windows 2008R2 is not affected by this error. And for information: latest windows build 2..6.5-4 has compiled with SSL support. I don?t need it, but I CAN NOT disable this option. I found it after sending test request like ?upsc.exe UPS1 ups.status?. Thank you! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121213/52f1c955/attachment.html>