Hi All,
I am new to configuring samba and am trying to setup a few read-write shares
on my FreeBSD box. Unfortunately, it's proving very difficult to access my
shares:
1. When I use the smb client, I see the following error:
vanadium# smbclient -L localhost -U James
added interface ip=192.168.0.2 bcast=192.168.0.255
nmask=255.255.
error connecting to 127.0.0.1:139 (Invalid argument)
Error connecting to 127.0.0.1 (Invalid argument)
Connection to localhost failed
2. When on a Windows XP box (with netbios disabled) I see this error:
> net use * \\192.168.0.2 /USER:James
"The remote resource is no longer available"
> net use * \\192.168.0.2\myshare /USER:James
"The remote resource is no longer available"
I have tested the Windows XP machine and it seems to be able to access shares
available on other XP machines.
I did create the username "James" using "smbpasswd -a James"
and I have configured inetd.conf as follows:
#CIFS Mode Only (aka Direct Peer)
microsoft-ds stream tcp nowait.400 root /usr/local/samba/bin/smbd smbd
When I connect from the XP box (192.168.0.10) I decided to run a tcpdump to
see whether anything was happening:
vanadium# tcpdump -vv -i rl0 host 192.168.0.10
tcpdump: listening on rl0
13:08:53.899792 192.168.0.10.1265 > 192.168.0.2.microsoft-ds: S [tcp sum ok]
4218106297:4218106297(0) win 65520 <mss 1260,nop,nop,sackOK> (DF) (ttl
128,
id 3595, len 48)
13:08:53.899894 192.168.0.2.microsoft-ds > 192.168.0.10.1265: S [tcp sum ok]
2024285486:2024285486(0) ack 4218106298 win 65535 <mss 1460> (DF) (ttl 64,
id
801, len 44)
13:08:53.900031 192.168.0.10.1265 > 192.168.0.2.microsoft-ds: . [tcp sum ok]
1:1(0) ack 1 win 65520 (DF) (ttl 128, id 3596, len 40)
13:08:53.900462 192.168.0.10.1265 > 192.168.0.2.microsoft-ds: P 1:138(137)
ack
1 win 65520 (DF) (ttl 128, id 3597, len 177)
13:08:53.903247 192.168.0.2.microsoft-ds > 192.168.0.10.1265: F [tcp sum ok]
1:1(0) ack 138 win 65535 (DF) (ttl 64, id 802, len 40)
13:08:53.903515 192.168.0.10.1265 > 192.168.0.2.microsoft-ds: F [tcp sum ok]
138:138(0) ack 2 win 65520 (DF) (ttl 128, id 3598, len 40)
13:08:53.903575 192.168.0.2.microsoft-ds > 192.168.0.10.1265: . [tcp sum ok]
2:2(0) ack 139 win 65534 (ttl 64, id 803, len 40)
This, I believe, shows the samba server sending a "FIN" to the Windows
box, so
I suspect my Samba config is dubious!
I have attached the smb.conf file and would appreciate it if anyone could
spare some time to help me out.
Any suggestions are very welcome.
Kind regards,
James.
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings
====================================[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = FreeBSD
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.0. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba.log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 10
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Note: Do NOT use the now deprecated option of "domain controller"
# This option is no longer implemented.
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /usr/local/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY IPTOS_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = yes
# Client codepage settings
# for Greek users
; client code page=737
# for European users (Latin 1)
; client code page=850
# for European users (Latin 2)
; client code page=852
# for Icelandic users
; client code page=861
# for Cyrillic users
; client code page=866
# for Japanese Users
; client code page=932
; coding system=cap
# for Simplified Chinese Users
; client code page=936
; coding system=cap
# for Korean Users
; client code page=949
; coding system=cap
# for Traditional Chinese Users
; client code page=950
; coding system=cap
#============================ Share Definitions
=============================[homes]
comment = Home Directories
browseable = yes
writeable = yes
public = no
# Un-comment the following two lines to add a recycle bin facility to a samba
share
# NOTE: It currently doesn't work with the [homes] virtual share, use a
regular share instead
; vfs object = /usr/local/lib/samba/recycle.so
; vfs options= /usr/local/etc/recycle.conf.default
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writeable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writeable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writeable = yes
; printable = no
; write list = @staff
# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in
fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writeable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writeable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writeable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writeable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writeable = yes
; printable = no
# Un-comment the following two lines to add a recycle bin facility to a samba
share
; vfs object = /usr/local/lib/samba/recycle.so
; vfs options= /usr/local/etc/recycle.conf.default
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writeable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
[myshare]
comment = James Userwork
path = /home/James/samba
valid users = James
public = no
writeable = yes
printable = no
create mask = 0765
