Jansen, Eric
2001-Jan-29 17:15 UTC
SAMBA error "sytem not accessible / The remote procedure call fai led"
Hi all, I have setup Samba 2.0.3 on my HP3000 system running MPE version 6.0. I used to have 1.9.16p9. Ever since I upgraded to 2.0.3 I cannot see the list of available shares from my NT workstation using \\cditest or clicking on the system in Network Neighbourhood. I tried with different usernames: MANAGER.SYS, ERIC.SAMBA, MGR.SAMBA I am able to connect to the shares seperately by mapping them. Here are my config files: user.map: ERIC.SAMBA = ejansen [user.map](EOF) global part of smb.conf: [global] # you MUST supply IP address and subnet mask of your 3000 here interfaces = 192.168.1.251/255.255.255.0 time offset = -300 # config file and log file used by smbd and nmbd are typically # specified as command line options, unless you are using macros # like eg %S or %m to get different files for each service or # client machine, which allows very sophisticated (albeit complex) # configurations (also see "include" directive and smb.conf doc) config file = /usr/local/samba/lib/smb.conf # We set a separate log file for each machine that connects log file = /usr/local/samba/var/log.%m # fix for smbstatus error log level = 3 max log size = 100000 # mapping of incoming usernames is possible and may e.g. be used # to allow clients using Unix or PC style names like root or lappel # instead of MPE style names like manager.sys or lars.appel # multiple alias names are possible e.g. lars.appel = lappel lars # security = share is needed to be able to see the shares allowed # when logged on the system directly security = share username map = /usr/local/samba/lib/user.map unix password sync = false browse list = yes # nt support =yes will samba make to act as old version # nt smb support = yes null passwords = yes # printcap file lists printer names for use by [printers] section printcap name = /usr/local/samba/lib/printcap # how much detail you want in the logfile (try 3 or 5 or higher) debug level = 5 # can use a shell script if system does not supply statfs() routine dfree command = /usr/local/samba/lib/myfree # used in conjunction with printcap file and [printers] section load printers = yes # the workgroup that your server belongs to workgroup = CDILLC # these can be used e.g. to create logon/logoff like console messages preexec = /usr/local/samba/lib/tellop tcon %S %u %m %I postexec = /usr/local/samba/lib/tellop tdis %S %u %m %I # Deal "gracefully" with long file names mangled names =yes # Do not force downshift of all upper-case filenames to lower case # else, copying directories fails ( looks for upper case names) preserve case = yes # Preserve case, even for 8.3 files short preserve case = yes # shares may be configured to accept connections without a validated # user id and password (similar to anonymous ftp) and then assume the # guest logon identity for accessing files and printers guest account = %S admin users = MANAGER.SYS # --------------------------------------------------------------------- (...) Does anybody know how to resolve this issue, what the settings are? TIA, Eric Jansen
MCCALL,DON (HP-USA,ex1)
2001-Jan-29 22:36 UTC
SAMBA error "sytem not accessible / The remote procedure call fai led"
Hi Eric, We're about to gr the 2.0.7 version of Samba/iX here at HP for MPE/iX version 6.5; I have tested this and don't have this problem there. But if you'de like to set your log level = 10 in smb.conf and try again (with \\servername) from your nt client, I'd be glad to take a look at the logfile and see if I can see what the problem is. Hope this helps, Don -----Original Message----- From: Jansen, Eric [mailto:Eric_Jansen@cdillc.com] Sent: Monday, January 29, 2001 12:16 To: 'samba@samba.org'; 'HP3000-L@RAVEN.UTC.EDU' Subject: SAMBA error "sytem not accessible / The remote procedure call fai led" Hi all, I have setup Samba 2.0.3 on my HP3000 system running MPE version 6.0. I used to have 1.9.16p9. Ever since I upgraded to 2.0.3 I cannot see the list of available shares from my NT workstation using \\cditest or clicking on the system in Network Neighbourhood. I tried with different usernames: MANAGER.SYS, ERIC.SAMBA, MGR.SAMBA I am able to connect to the shares seperately by mapping them. Here are my config files: user.map: ERIC.SAMBA = ejansen [user.map](EOF) global part of smb.conf: [global] # you MUST supply IP address and subnet mask of your 3000 here interfaces = 192.168.1.251/255.255.255.0 time offset = -300 # config file and log file used by smbd and nmbd are typically # specified as command line options, unless you are using macros # like eg %S or %m to get different files for each service or # client machine, which allows very sophisticated (albeit complex) # configurations (also see "include" directive and smb.conf doc) config file = /usr/local/samba/lib/smb.conf # We set a separate log file for each machine that connects log file = /usr/local/samba/var/log.%m # fix for smbstatus error log level = 3 max log size = 100000 # mapping of incoming usernames is possible and may e.g. be used # to allow clients using Unix or PC style names like root or lappel # instead of MPE style names like manager.sys or lars.appel # multiple alias names are possible e.g. lars.appel = lappel lars # security = share is needed to be able to see the shares allowed # when logged on the system directly security = share username map = /usr/local/samba/lib/user.map unix password sync = false browse list = yes # nt support =yes will samba make to act as old version # nt smb support = yes null passwords = yes # printcap file lists printer names for use by [printers] section printcap name = /usr/local/samba/lib/printcap # how much detail you want in the logfile (try 3 or 5 or higher) debug level = 5 # can use a shell script if system does not supply statfs() routine dfree command = /usr/local/samba/lib/myfree # used in conjunction with printcap file and [printers] section load printers = yes # the workgroup that your server belongs to workgroup = CDILLC # these can be used e.g. to create logon/logoff like console messages preexec = /usr/local/samba/lib/tellop tcon %S %u %m %I postexec = /usr/local/samba/lib/tellop tdis %S %u %m %I # Deal "gracefully" with long file names mangled names =yes # Do not force downshift of all upper-case filenames to lower case # else, copying directories fails ( looks for upper case names) preserve case = yes # Preserve case, even for 8.3 files short preserve case = yes # shares may be configured to accept connections without a validated # user id and password (similar to anonymous ftp) and then assume the # guest logon identity for accessing files and printers guest account = %S admin users = MANAGER.SYS # --------------------------------------------------------------------- (...) Does anybody know how to resolve this issue, what the settings are? TIA, Eric Jansen