Dave
2009-Nov-06 20:29 UTC
[CentOS] centos 5.3 install ncview X libraries error and netcdf header error
I was trying to install software named ncview on a centos 5.3 box. ./configure command gave this error: Error, the X libraries and development headers must be installed for ncview to work! I was surprised that there were many google hits related to ubuntu, none for centos. So even though I eventually figured out what to do, I decided to share this with the list anyhow, so maybe next time I google that error I'll get this post. The X error message would have been much more helpful if it was more specific about what exactly is missing. "X libraries and headers" just covers too much territory. Google said the ubuntu flavored problem was solved by ./configure --x-libraries=/usr/lib64 (or wherever the necessary libraries are). After much finagling, I solved my problem by installing xorg-x11-proto-devel-7.1-13.el5 package (has headers in it) and using this command: ./configure --x-libraries=/usr/lib64 --x-includes=/usr/include/X11 That got past the X check, but then I got this error: checking for /sw/include/netcdf.h... no Fatal error: I cannot find the directory that holds the netcdf include file netcdf.h! A bit more digging and success with: ./configure --x-libraries=/usr/lib64 --x-includes=/usr/include/X11 --with-netcdf_incdir=/usr/include/netcdf-3 I'm still not sure exactly which X libraries were required in addition to the header package (xorg-x11-proto-devel-7.1-13.el5). Fedora has (used to have?) an rpm for ncview, I wish centos did. best, Dave p.s. I figured out where the 'X headers' were by using this command: yum search xorg|grep -i headers ./configure --help told me the header switch and the netcdf switch. figure out netcdf: rpm -qa|grep netcdf netcdf-static-3.6.2-7.el5 netcdf-3.6.2-7.el5 netcdf-devel-3.6.2-7.el5 [root at sock ncview-1.93g]# rpm -qs netcdf-devel|grep 'netcdf.h$' normal /usr/include/netcdf-3/netcdf.h more details: [root at sock ncview-1.93g]# ./configure [snip] checking for ANSI C header files... yes checking for X... no Error, the X libraries and development headers must be installed for ncview to work! [root at sock ncview-1.93g]# ./configure --x-libraries=/usr/lib64 [snip] checking for X... no Error, the X libraries and development headers must be installed for ncview to work! [root at sock ncview-1.93g]# yum search xorg|grep -i headers xorg-x11-proto-devel.i386 : X.Org X11 Protocol headers xorg-x11-proto-devel.x86_64 : X.Org X11 Protocol headers [root at sock ncview-1.93g]# rpm -q xorg-x11-proto-devel.x86_64 xorg-x11-proto-devel-7.1-13.el5 [root at sock ncview-1.93g]# ls /usr/lib64/lib[xX]* /usr/lib64/libx11globalcomm.la /usr/lib64/libXinerama.so.1.0.0 /usr/lib64/libx11globalcomm.so /usr/lib64/libXi.so.6 /usr/lib64/libx11globalcomm.so.1 /usr/lib64/libXi.so.6.0.0 /usr/lib64/libx11globalcomm.so.1.0.0 /usr/lib64/libxkbfile.so.1 /usr/lib64/libX11.so /usr/lib64/libxkbfile.so.1.0.2 /usr/lib64/libX11.so.6 /usr/lib64/libxklavier.so.11 /usr/lib64/libX11.so.6.2.0 /usr/lib64/libxklavier.so.11.0.0 /usr/lib64/libx2sys.so /usr/lib64/libxml2.so.2 /usr/lib64/libx2sys.so.4 /usr/lib64/libxml2.so.2.6.26 /usr/lib64/libXau.so /usr/lib64/libXm.so.4 /usr/lib64/libXau.so.6 /usr/lib64/libXm.so.4.0.1 /usr/lib64/libXau.so.6.0.0 /usr/lib64/libXmu.so.6 /usr/lib64/libXaw3d.so.7 /usr/lib64/libXmu.so.6.2.0 /usr/lib64/libXaw3d.so.7.0 /usr/lib64/libXmuu.so.1 /usr/lib64/libXaw6.so.6 /usr/lib64/libXmuu.so.1.0.0 /usr/lib64/libXaw6.so.6.0.1 /usr/lib64/libXpm.so.4 /usr/lib64/libXaw7.so.7 /usr/lib64/libXpm.so.4.11.0 /usr/lib64/libXaw7.so.7.0.0 /usr/lib64/libXp.so.6 /usr/lib64/libXaw.so.6 /usr/lib64/libXp.so.6.2.0 /usr/lib64/libXaw.so.7 /usr/lib64/libXrandr.so.2 /usr/lib64/libXbae.so.4 /usr/lib64/libXrandr.so.2.0.0 /usr/lib64/libXbae.so.4.0.60 /usr/lib64/libXrender.so.1 /usr/lib64/libXcomposite.so.1 /usr/lib64/libXrender.so.1.3.0 /usr/lib64/libXcomposite.so.1.0.0 /usr/lib64/libXRes.so.1 /usr/lib64/libXcursor.so.1 /usr/lib64/libXRes.so.1.0.0 /usr/lib64/libXcursor.so.1.0.2 /usr/lib64/libxslt.so.1 /usr/lib64/libXdamage.so.1 /usr/lib64/libxslt.so.1.1.17 /usr/lib64/libXdamage.so.1.0.0 /usr/lib64/libXss.so.1 /usr/lib64/libXdmcp.so /usr/lib64/libXss.so.1.0.0 /usr/lib64/libXdmcp.so.6 /usr/lib64/libXTrap.so.6 /usr/lib64/libXdmcp.so.6.0.0 /usr/lib64/libXTrap.so.6.4.0 /usr/lib64/libXevie.so.1 /usr/lib64/libXt.so.6 /usr/lib64/libXevie.so.1.0.0 /usr/lib64/libXt.so.6.0.0 /usr/lib64/libXext.so.6 /usr/lib64/libXtst.so.6 /usr/lib64/libXext.so.6.4.0 /usr/lib64/libXtst.so.6.1.0 /usr/lib64/libXfixes.so.3 /usr/lib64/libXv.so.1 /usr/lib64/libXfixes.so.3.1.0 /usr/lib64/libXv.so.1.0.0 /usr/lib64/libXfontcache.so.1 /usr/lib64/libXxf86dga.so.1 /usr/lib64/libXfontcache.so.1.0.0 /usr/lib64/libXxf86dga.so.1.0.0 /usr/lib64/libXfont.so.1 /usr/lib64/libXxf86misc.so.1 /usr/lib64/libXfont.so.1.4.1 /usr/lib64/libXxf86misc.so.1.1.0 /usr/lib64/libXft.so.2 /usr/lib64/libXxf86vm.so.1 /usr/lib64/libXft.so.2.1.2 /usr/lib64/libXxf86vm.so.1.0.0 /usr/lib64/libXinerama.so.1 [root at sock ncview-1.93g]# rpm -qa|grep xorg xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-fonts-misc-7.1-2.1.el5 xorg-x11-drv-magictouch-1.0.0.5-2.1 xorg-x11-drv-fbdev-0.3.0-2 xorg-x11-drv-jamstudio-1.1.0-1.1 xorg-x11-drv-spaceorb-1.1.0-1.1 xorg-x11-drv-vga-4.1.0-2.1 xorg-x11-drv-evdev-1.0.0.5-3.el5 xorg-x11-fonts-75dpi-7.1-2.1.el5 xorg-x11-drv-void-1.1.0-3.1 xorg-x11-drv-keyboard-1.1.0-3 xorg-x11-drv-elographics-1.1.0-1.1 xorg-x11-drv-i810-1.6.5-9.21.el5 xorg-x11-drv-microtouch-1.1.0-1.1 xorg-x11-drv-ur98-1.1.0-1.1 xorg-x11-drv-siliconmotion-1.4.1-2.1 xorg-x11-drv-mutouch-1.1.0-3 xorg-x11-proto-devel-7.1-13.el5 xorg-x11-apps-7.1-4.0.1.el5 xorg-x11-fonts-Type1-7.1-2.1.el5 xorg-x11-fonts-100dpi-7.1-2.1.el5 xorg-x11-drv-tdfx-1.2.1-3.1 xorg-x11-drv-dmc-1.1.0-2 xorg-x11-drv-palmax-1.1.0-1.1 xorg-x11-drv-ast-0.81.0-3 xorg-x11-drv-trident-1.2.1-3.fc6 xorg-x11-drv-s3virge-1.9.1-2.1 xorg-x11-drv-s3-0.4.1-2.1 xorg-x11-drv-citron-2.2.0-1.1 xorg-x11-drv-sis-0.9.1-7.1.el5 xorg-x11-drv-sisusb-0.8.1-4.1 xorg-x11-drv-dummy-0.2.0-2.1 xorg-x11-drivers-7.1-4.1.el5 xorg-x11-filesystem-7.1-2.fc6 xorg-x11-server-utils-7.1-4.fc6 xorg-x11-fonts-base-7.1-2.1.el5 xorg-x11-xfs-1.0.2-4 xorg-x11-fonts-ISO8859-1-75dpi-7.1-2.1.el5 xorg-x11-fonts-truetype-7.1-2.1.el5 xorg-x11-drv-penmount-1.1.0-2.1 xorg-x11-drv-savage-2.1.1-5.fc6 xorg-x11-drv-joystick-1.1.0-1.1 xorg-x11-drv-magellan-1.1.0-1.1 xorg-x11-drv-fpit-1.1.0-1.1 xorg-x11-drv-calcomp-1.1.0-1.1 xorg-x11-drv-vmmouse-12.4.0-2.1 xorg-x11-drv-acecad-1.1.0-2.1 xorg-x11-drv-elo2300-1.1.0-1.1 xorg-x11-drv-digitaledge-1.1.0-1.1 xorg-x11-drv-nv-2.1.12-3.el5 xorg-x11-drv-vesa-1.3.0-8.1.el5 xorg-x11-xauth-1.0.1-2.1 xorg-x11-twm-1.0.1-3.1 xorg-x11-xinit-1.0.2-15.el5 xorg-x11-utils-7.1-2.fc6 xorg-x11-fonts-ISO8859-1-100dpi-7.1-2.1.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 xorg-x11-drv-hyperpen-1.1.0-2 xorg-x11-drv-ati-6.6.3-3.22.el5 xorg-x11-drv-vmware-10.13.0-2.1 xorg-x11-drv-mga-1.4.2-10.el5 xorg-x11-drv-via-0.2.1-9 xorg-x11-drv-summa-1.1.0-1.1 xorg-x11-xkb-utils-1.0.2-2.1 xorg-x11-font-utils-7.1-2 xorg-x11-drv-mouse-1.1.1-1.1 xorg-x11-drv-tek4957-1.1.0-1.1 xorg-x11-drv-aiptek-1.0.1-2 xorg-x11-drv-voodoo-1.1.0-3.1 xorg-x11-drv-cirrus-1.1.0-2.fc6 xorg-x11-drv-dynapro-1.1.0-2 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20091106/06dcf90d/attachment-0003.html>
Dave
2009-Nov-07 00:19 UTC
[CentOS] centos 5.3 install ncview X libraries error and netcdf header error
Executive summary: make did not work until I installed libICE-devel.x86_64,
libSM-devel.x86_64, libXaw-devel.x86_64, libXext-devel.x86_64,
libXmu-devel.x86_64, libXt-devel.x86_64 and netpbm-devel.x86_64. -frames
option was disabled until I installed netpbm and metpbm-devel and chagnes
the ./configure command string slightly. Make now completes, so I hope
everything works, though I haven't tested yet and it gives plenty of
warnings.
When I sent the previous post, ./configure was working, but I soon found
that make did not (see full output at end of post). Here is the first error:
ncview.includes.h:42:27: error: X11/Intrinsic.h: No such file or directory
No file with the name "Intrinsic.h" anywhere on my machine.
[root at sock ncview-1.93g]# rpm -qs xorg-x11-proto-devel-7.1-13.el5 |grep
Intrinsic
[root at sock ncview-1.93g]# find /usr|grep Intrinsic.h
[root at sock ncview-1.93g]#
My first guess was - version conflict? I guess I need to see if there are
older or newer versions of X that contain this file (& the others). It's
not clear to me whether my X is too old or too new according to the README:
[root at sock ncview-1.93g]# cat README INSTALL|grep X
This is the source for "ncview", a X Windows (Release 4 or higher)
yum info xorg-x11-proto-devel-7.1-13.el5
[snip]
Version : 7.1
Release : 13.el5
[snip]
Description: X.Org X11 Protocol headers
Both 7 and 13 > 4, but do any of them refer to the same thing?
Since I was stumped, I downloaded an old source rpm of ncview for fedora
and looked at the spec file.
[root at sock junk]# rpm2cpio ncview-1.92e-13.fc9.src.rpm |cpio -i
--make-directories
[root at sock junk]# tar zxvf ncview-1.92e.tar.gz
[root at sock junk]# cat ncview.spec|grep BuildRequires:
BuildRequires: xorg-x11-proto-devel libXaw-devel libXt-devel libXext-devel
BuildRequires: libXmu-devel libICE-devel libSM-devel libX11-devel
BuildRequires: netcdf-devel netcdf-static udunits-devel netpbm-devel
Wonder if any are not installed?
[root at sock junk]# rpm -q libXaw-devel libXt-devel libXext-devel libXmu-devel
libICE-devel libSM-devel libX11-devel netcdf-devel netcdf-static
udunits-devel netpbm-devel |grep 'is not installed'
package libXaw-devel is not installed
package libXt-devel is not installed
package libXext-devel is not installed
package libXmu-devel is not installed
package libICE-devel is not installed
package libSM-devel is not installed
package netpbm-devel is not installed
Installed them:
[root at sock ncview-1.93g]#yum install libICE-devel.x86_64 libSM-devel.x86_64
libXaw-devel.x86_64 libXext-devel.x86_64 libXmu-devel.x86_64
libXt-devel.x86_64 netpbm-devel.x86_64
[snip]
Complete!
make now seems to run, with some warnings I hope I can ignore (full text
below). 'Make install' seems happy, now I just need to run with some
actual
data and see if it works.
I BCC'ed the author of ncview and he replied in a helpful way. I still wish
the error message could be better. At the very least, if I am only missing
the development headers, the error message should not be scolding me about
the libraries. But that may be a shortcoming of the way that configure is
designed and the X11 monster has evolved. X11 intimidates me, it is too big.
One more observation: This message appears in the ./configure output:
"Note: the -frames option is NOT enabled, because I could not find the
location of the PPM include file 'ppm.h' or library file
'libppm.a'. "
I finally found ppm.h in /usr/include and configure is happy when I give it
this:
./configure --x-libraries=/usr/lib64 --x-includes=/usr/include/X11
--with-netcdf_incdir=/usr/include/netcdf-3 -with-ppm_incdir= /usr/include
I think the netpbm and netpbm-devel packages are what was needed -
"checking
for ppm_writeppm in -lnetpbm... yes"
[root at sock ncview-1.93g]# rpm -qs netpbm-devel|grep -i 'ppm.h$'
normal /usr/include/ppm.h
mahalo,
Dave
#configure works:
[root at sock ncview-1.93g]# ./configure --x-libraries=/usr/lib64
--x-includes=/usr/include/X11 --with-netcdf_incdir=/usr/include/netcdf-3
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for library containing strerror... none required
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for X... libraries /usr/lib64, headers /usr/include/X11
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... no
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking /usr/include/netcdf-3/netcdf.h usability... yes
checking /usr/include/netcdf-3/netcdf.h presence... yes
checking for /usr/include/netcdf-3/netcdf.h... yes
Using user-specified netCDF include dir=/usr/include/netcdf-3
Found netcdf.h in: /usr/include/netcdf-3
checking for nc_open in -lnetcdf... yes
Found netcdf library file libnetcdf.a in directory .
checking udunits.h usability... yes
checking udunits.h presence... yes
checking for udunits.h... yes
checking for /usr/local/lib/libudunits.a... no
checking for /usr/lib/libudunits.a... yes
****************************************************************************
Udunits support enabled. Note: Udunits did not used to work with MAC OS X
If you are using Mac OS X and have trouble, make sure you are using the
latest udunits package. If it still doesn't work, remove the udunits
library and remake ncview
udunits dirs: include: . library: /usr/lib libname: udunits
****************************************************************************
checking /usr/local/include/ppm.h usability... no
checking /usr/local/include/ppm.h presence... no
checking for /usr/local/include/ppm.h... no
checking /usr/include/ppm.h usability... no
checking /usr/include/ppm.h presence... no
checking for /usr/include/ppm.h... no
checking /root/include/ppm.h usability... no
checking /root/include/ppm.h presence... no
checking for /root/include/ppm.h... no
checking for ppm_writeppm in -lppm... no
checking for /usr/local/lib/libppm.so... no
checking for /usr/lib/libppm.so... no
checking for /lib/libppm.so... no
checking for /root/lib/libppm.so... no
checking for ppm_writeppm in -lnetpbm... no
checking for /usr/local/lib/libnetpbm.so... no
checking for /usr/lib/libnetpbm.so... no
checking for /lib/libnetpbm.so... no
checking for /root/lib/libnetpbm.so... no
************************************************************************
Note: the -frames option is NOT enabled, because I could not find the
location of the PPM include file 'ppm.h' or library file
'libppm.a'. Ncview uses the ppm package to dump out the frames viewed,
which is an easy way to make an mpeg video of the data if you want.
If you do not want this feature, then don't worry about the lack
of ppm support. If you DO want this, then you must tell me where to find
the ppm package by giving arguments to configure, as follows:
./configure -with-ppm_incdir=include_directory
-with-ppm_libdir=library_directory
************************************************************************
checking for a BSD-compatible install... /usr/bin/install -c
configure: creating ./config.status
config.status: creating Makefile
#before additional installs, make blows up:
[root at sock ncview-1.93g]# make
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
ncview.o ncview.c
In file included from ncview.c:24:
ncview.includes.h:42:27: error: X11/Intrinsic.h: No such file or directory
ncview.includes.h:43:28: error: X11/IntrinsicP.h: No such file or directory
ncview.includes.h:44:28: error: X11/StringDefs.h: No such file or directory
ncview.includes.h:46:23: error: X11/Shell.h: No such file or directory
ncview.includes.h:51:26: error: X11/Xaw/Form.h: No such file or directory
ncview.includes.h:52:25: error: X11/Xaw/Box.h: No such file or directory
ncview.includes.h:53:29: error: X11/Xaw/Command.h: No such file or directory
ncview.includes.h:54:28: error: X11/Xaw/Toggle.h: No such file or directory
ncview.includes.h:55:28: error: X11/Xaw/Simple.h: No such file or directory
ncview.includes.h:56:28: error: X11/Xaw/Dialog.h: No such file or directory
ncview.includes.h:57:31: error: X11/Xaw/Scrollbar.h: No such file or
directory
ncview.includes.h:58:30: error: X11/Xaw/Viewport.h: No such file or
directory
ncview.includes.h:59:26: error: X11/Xaw/List.h: No such file or directory
ncview.includes.h:60:31: error: X11/Xaw/AsciiText.h: No such file or
directory
ncview.includes.h:61:32: error: X11/Xaw/MenuButton.h: No such file or
directory
ncview.includes.h:62:32: error: X11/Xaw/SimpleMenu.h: No such file or
directory
ncview.includes.h:63:28: error: X11/Xaw/SmeBSB.h: No such file or directory
ncview.includes.h:64:29: error: X11/Xaw/SmeLine.h: No such file or directory
In file included from ncview.includes.h:66,
from ncview.c:24:
SciPlot.h:28:22: error: X11/Core.h: No such file or directory
In file included from ncview.includes.h:66,
from ncview.c:24:
SciPlot.h:119: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__?
before ?sciplotWidgetClass?
SciPlot.h:136: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__?
before ?SciPlotPSCreateFancy?
SciPlot.h:137: error: expected ?=?, ?,?, ?;?, ?asm? or ?__attribute__?
before ?SciPlotPSCreate?
SciPlot.h:138: error: expected ?)? before ?wi?
SciPlot.h:139: error: expected ?)? before ?wi?
SciPlot.h:140: error: expected ?)? before ?wi?
SciPlot.h:141: error: expected ?)? before ?wi?
SciPlot.h:142: error: expected ?)? before ?wi?
SciPlot.h:143: error: expected ?)? before ?wi?
SciPlot.h:144: error: expected ?)? before ?wi?
SciPlot.h:145: error: expected ?)? before ?wi?
SciPlot.h:146: error: expected ?)? before ?wi?
SciPlot.h:147: error: expected ?)? before ?wi?
SciPlot.h:148: error: expected ?)? before ?wi?
SciPlot.h:149: error: expected ?)? before ?wi?
SciPlot.h:150: error: expected ?)? before ?wi?
SciPlot.h:151: error: expected ?)? before ?wi?
SciPlot.h:152: error: expected ?)? before ?wi?
SciPlot.h:153: error: expected ?)? before ?wi?
SciPlot.h:154: error: expected ?)? before ?wi?
SciPlot.h:155: error: expected ?)? before ?wi?
SciPlot.h:156: error: expected ?)? before ?wi?
SciPlot.h:157: error: expected ?)? before ?wi?
SciPlot.h:158: error: expected ?)? before ?w?
SciPlot.h:159: error: expected ?)? before ?wi?
SciPlot.h:160: error: expected ?)? before ?wi?
SciPlot.h:161: error: expected ?)? before ?wi?
SciPlot.h:162: error: expected ?)? before ?wi?
In file included from ncview.c:26:
ncview.protos.h:187: error: expected ?)? before ?procedure?
ncview.protos.h:220: error: expected ?)? before ?w?
ncview.protos.h:225: error: expected ?)? before ?scrollbar?
ncview.protos.h:257: error: expected ?)? before ?*? token
ncview.protos.h:262: error: expected ?)? before ?procedure?
ncview.protos.h:299: warning: parameter names (without types) in function
declaration
ncview.c: In function ?parse_options?:
ncview.c:149: warning: incompatible implicit declaration of built-in
function ?strlen?
ncview.c:150: warning: incompatible implicit declaration of built-in
function ?strcpy?
ncview.c:239: warning: incompatible implicit declaration of built-in
function ?strstr?
ncview.c:251: warning: incompatible implicit declaration of built-in
function ?strlen?
ncview.c:256: warning: incompatible implicit declaration of built-in
function ?strncpy?
ncview.c:264: warning: incompatible implicit declaration of built-in
function ?strcpy?
ncview.c: In function ?get_cmaps_from_dir?:
ncview.c:389: warning: incompatible implicit declaration of built-in
function ?strstr?
ncview.c: In function ?init_cmap_from_file?:
ncview.c:451: warning: incompatible implicit declaration of built-in
function ?strlen?
ncview.c:452: warning: incompatible implicit declaration of built-in
function ?strncpy?
make: *** [ncview.o] Error 1
#after installing 7 additional packages:
[root at sock ncview-1.93g]# make
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
ncview.o ncview.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
file.o file.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
util.o util.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
do_buttons.o do_buttons.c
do_buttons.c: In function ?do_rewind?:
do_buttons.c:96: warning: passing argument 1 of ?in_timer_set? from
incompatible pointer type
do_buttons.c:101: warning: passing argument 1 of ?in_timer_set? from
incompatible pointer type
do_buttons.c: In function ?do_fastforward?:
do_buttons.c:160: warning: passing argument 1 of ?in_timer_set? from
incompatible pointer type
do_buttons.c:165: warning: passing argument 1 of ?in_timer_set? from
incompatible pointer type
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
file_netcdf.o file_netcdf.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
view.o view.c
view.c: In function ?view_draw?:
view.c:616: warning: passing argument 1 of ?in_timer_set? from incompatible
pointer type
view.c:668: warning: passing argument 1 of ?in_timer_set? from incompatible
pointer type
view.c: In function ?view_check_new_data?:
view.c:716: warning: passing argument 1 of ?in_timer_set? from incompatible
pointer type
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
do_print.o do_print.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
epic_time.o epic_time.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/interface.o interface/interface.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/x_interface.o interface/x_interface.c
interface/x_interface.c: In function ?x_initialize?:
interface/x_interface.c:713: warning: passing argument 4 of
?XtAddEventHandler? from incompatible pointer type
interface/x_interface.c: In function ?x_init_widgets_varsel_menu_inner?:
interface/x_interface.c:1302: warning: cast to pointer from integer of
different size
interface/x_interface.c: In function ?dimsel_callback?:
interface/x_interface.c:3043: warning: cast from pointer to integer of
different size
interface/x_interface.c: In function ?error_popup_callback?:
interface/x_interface.c:3275: warning: cast from pointer to integer of
different size
interface/x_interface.c: In function ?x_init_dim_info?:
interface/x_interface.c:3488: warning: cast to pointer from integer of
different size
interface/x_interface.c: In function ?varsel_menu_select?:
interface/x_interface.c:3685: warning: cast from pointer to integer of
different size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/dataedit.o interface/dataedit.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/display_info.o interface/display_info.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/plot_xy.o interface/plot_xy.c
interface/plot_xy.c: In function ?x_popup_XY_graph?:
interface/plot_xy.c:388: warning: cast to pointer from integer of different
size
interface/plot_xy.c: In function ?xy_track_pointer?:
interface/plot_xy.c:715: warning: cast from pointer to integer of different
size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/utils.o interface/utils.c
interface/utils.c: In function ?interp?:
interface/utils.c:59: warning: comparison is always false due to limited
range of data type
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/range.o interface/range.c
interface/range.c: In function ?range_popup_callback?:
interface/range.c:315: warning: cast from pointer to integer of different
size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/printer_options.o interface/printer_options.c
interface/printer_options.c: In function ?printer_options?:
interface/printer_options.c:101: warning: cast to pointer from integer of
different size
interface/printer_options.c:182: warning: cast from pointer to integer of
different size
interface/printer_options.c: In function ?po_popup_callback?:
interface/printer_options.c:533: warning: cast from pointer to integer of
different size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
overlay.o overlay.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/filesel.o interface/filesel.c
interface/filesel.c: In function ?fs_popup_callback?:
interface/filesel.c:260: warning: cast from pointer to integer of different
size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/set_options.o interface/set_options.c
interface/set_options.c: In function ?opt_popup_callback?:
interface/set_options.c:270: warning: cast from pointer to integer of
different size
interface/set_options.c: In function ?overlay_set_callback?:
interface/set_options.c:310: warning: cast from pointer to integer of
different size
interface/set_options.c: In function ?overlay_unset_callback?:
interface/set_options.c:322: warning: cast from pointer to integer of
different size
interface/set_options.c: In function ?shrink_set_callback?:
interface/set_options.c:332: warning: cast from pointer to integer of
different size
interface/set_options.c: In function ?shrink_unset_callback?:
interface/set_options.c:339: warning: cast from pointer to integer of
different size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/plot_range.o interface/plot_range.c
interface/plot_range.c: In function ?plot_range_popup_callback?:
interface/plot_range.c:215: warning: cast from pointer to integer of
different size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
udu.o udu.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
SciPlot.o SciPlot.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/RadioWidget.o interface/RadioWidget.c
interface/RadioWidget.c: In function ?button_click_callback?:
interface/RadioWidget.c:171: warning: cast to pointer from integer of
different size
interface/RadioWidget.c:176: warning: cast to pointer from integer of
different size
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS
-DNCVIEW_LIB_DIR=\"/usr/local/lib/ncview\" \
-I. -I/usr/include/X11 -I/usr/include/netcdf-3 -I. -c -o
interface/cbar.o interface/cbar.c
gcc -g -O2 -I/usr/include/X11 -DINC_UDUNITS -o ncview ncview.o file.o
util.o do_buttons.o file_netcdf.o view.o do_print.o epic_time.o
interface/interface.o interface/x_interface.o interface/dataedit.o
interface/display_info.o interface/plot_xy.o interface/utils.o
interface/range.o interface/printer_options.o overlay.o interface/filesel.o
interface/set_options.o interface/plot_range.o udu.o SciPlot.o
interface/RadioWidget.o interface/cbar.o -L. -L/usr/lib \
-L/usr/lib64 -lnetcdf -ludunits -lXaw -lXmu \
\
-lXt -lXext -lX11 -lm
/usr/bin/ld: skipping incompatible /usr/lib/libudunits.a when searching for
-ludunits
[root at sock ncview-1.93g]# make install
sed s=NCVIEW_LIB_DIR=/usr/local/lib/ncview= < ncview.1.sed > ncview.1
----------------------------------------------------
Installing binary in directory /usr/local/bin
----------------------------------------------------
if test ! -d /usr/local/bin; then mkdir -p /usr/local/bin; fi;
/usr/bin/install -c ncview /usr/local/bin/ncview
--------------------------------------------------------
Installing manual in directory /usr/local/man/man1
--------------------------------------------------------
if test ! -d /usr/local/man/man1; then mkdir -p /usr/local/man/man1; fi;
/usr/bin/install -c ncview.1 /usr/local/man/man1/ncview.1
------------------------------------
Installing application defaults file
------------------------------------
/bin/sh ./install-appdef "/usr/bin/install -c "
--------------------------------------------------------
Installing app-defaults file in /usr/lib/X11/app-defaults
--------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.centos.org/pipermail/centos/attachments/20091106/0ca70518/attachment-0003.html>
Maybe Matching Threads
- error in bargraph.CI {sciplot}
- Problem with bargraph.CI in Sciplot package
- introducing jitter in overlapping graphs using ggplots (plotmeans). Also sciplot.
- How to plot 2 continous variables on double y-axis with 2 factors: ggplot2, gplot, lattice, sciplot?
- multiple x factors using the sciplot package