thr3ads.net - CentOS - [CentOS] SCSI error: return code = 0x10070000 [Oct 2008]

If this information is useful, please help other people find it:
Share via:

partha chowdhury

2008-Oct-22 13:53 UTC

[CentOS] SCSI error: return code = 0x10070000

I have just bought a 120GB external usb drive but after plugging it in 
it is not getting mounted.

lines from /var/log/messages:> Oct 22 18:54:49 station2 kernel: usb 1-2: new high speed USB device using
ehci_hcd and address 2
> Oct 22 18:54:49 station2 kernel: usb 1-2: configuration #1 chosen from 1
choice
> Oct 22 18:54:49 station2 kernel: scsi4 : SCSI emulation for USB Mass
Storage devices
> Oct 22 18:54:54 station2 kernel:   Vendor: ST312002  Model: 2A             
Rev:  0 0
> Oct 22 18:54:54 station2 kernel:   Type:   Direct-Access                   
ANSI SCSI revision: 00
> Oct 22 18:54:54 station2 kernel: SCSI device sdd: 234441648 512-byte hdwr
sectors (120034 MB)
> Oct 22 18:54:54 station2 kernel: sdd: Write Protect is off
> Oct 22 18:54:54 station2 kernel: sdd: assuming drive cache: write through
> Oct 22 18:54:54 station2 kernel: SCSI device sdd: 234441648 512-byte hdwr
sectors (120034 MB)
> Oct 22 18:54:54 station2 kernel: sdd: Write Protect is off
> Oct 22 18:54:54 station2 kernel: sdd: assuming drive cache: write through
> Oct 22 18:54:54 station2 kernel:  sdd:<6>sd 4:0:0:0: SCSI error:
return code = 0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: Dev sdd: unable to read RDB block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error, dev sdd, sector 0
> Oct 22 18:54:54 station2 kernel: Buffer I/O error on device sdd, logical
block 0
> Oct 22 18:54:54 station2 kernel:  unable to read partition table
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: Attached scsi disk sdd
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: Attached scsi generic sg3 type
0
> Oct 22 18:54:54 station2 kernel: sd 4:0:0:0: SCSI error: return code =
0x10070000
> Oct 22 18:54:54 station2 kernel: end_request: I/O error
upon searching in the forum i came accross this tread 
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=9887&forum=29&post_id=31541#forumpost31541

but it has gone unanswered for two years.

Google search gives result all of which involves moving to a newer 
kernel.For the matter the drive gets mounted under fedora 9 - but i want 
to use it with CentOS.

here is my lspci -v
> 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0
>         Capabilities: [44] HyperTransport: Slave or Primary Interface
>         Capabilities: [dc] HyperTransport: MSI Mapping
> 
> 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0
>         I/O ports at 0900 [size=256]
> 
> 00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: 66MHz, fast devsel, IRQ 10
>         I/O ports at dc00 [size=64]
>         I/O ports at 0600 [size=64]
>         I/O ports at 0700 [size=64]
>         Capabilities: [44] Power Management version 2
> 
> 00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller
(rev a2) (prog-if 10 [OHCI])
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 58
>         Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
> 
> 00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller
(rev a2) (prog-if 20 [EHCI])
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
>         Memory at feafec00 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [44] Debug port
>         Capabilities: [80] Power Management version 2
> 
> 00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller
(rev a2) (prog-if 10 [OHCI])
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 66
>         Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
> 
> 00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller
(rev a2) (prog-if 20 [EHCI])
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50
>         Memory at feafe800 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [44] Debug port
>         Capabilities: [80] Power Management version 2
> 
> 00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2) (prog-if
01 [Subtractive decode])
>         Flags: bus master, 66MHz, fast devsel, latency 0
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>         I/O behind bridge: 0000e000-0000efff
>         Memory behind bridge: feb00000-febfffff
>         Capabilities: [b8] #0d [0000]
>         Capabilities: [8c] HyperTransport: MSI Mapping
> 
> 00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
(prog-if 85 [Master SecO PriO])
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
>         I/O ports at d480 [size=8]
>         I/O ports at d400 [size=4]
>         I/O ports at d080 [size=8]
>         I/O ports at d000 [size=4]
>         I/O ports at cc00 [size=16]
>         Memory at feafa000 (32-bit, non-prefetchable) [size=8K]
>         Capabilities: [44] Power Management version 2
>         Capabilities: [8c] #12 [0010]
> 
> 00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 90
>         Memory at feafc000 (32-bit, non-prefetchable) [size=4K]
>         I/O ports at c880 [size=8]
>         Memory at feafe400 (32-bit, non-prefetchable) [size=256]
>         Memory at feafe000 (32-bit, non-prefetchable) [size=16]
>         Capabilities: [44] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/3
Enable+
>         Capabilities: [6c] HyperTransport: MSI Mapping
> 
> 00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 
> 00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 
> 00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 
> 00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 
> 00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 
> 00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
(prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>         Capabilities: [40] #0d [0000]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
>         Capabilities: [60] HyperTransport: MSI Mapping
>         Capabilities: [80] Express Root Port (Slot+) IRQ 0
> 
> 00:12.0 VGA compatible controller: nVidia Corporation GeForce 7050 PV /
nForce 630a (rev a2) (prog-if 00 [VGA controller])
>         Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>         Flags: bus master, 66MHz, fast devsel, laten
>  Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>         Memory at d0000000 (64-bit, prefetchable) [size=256M]
>         Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
>         [virtual] Expansion ROM at feac0000 [disabled] [size=128K]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
> 
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
>         Flags: fast devsel
>         Capabilities: [80] HyperTransport: Host or Secondary Interface
> 
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
>         Flags: fast devsel
> 
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
>         Flags: fast devsel
> 
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
>         Flags: fast devsel
>         Capabilities: [f0] #0f [0010]
> 
> 01:06.0 Multimedia audio controller: Creative Labs [SB Live! Value]
EMU10k1X
>         Subsystem: Creative Labs Unknown device 1001
>         Flags: bus master, medium devsel, latency 64, IRQ 82
>         I/O ports at ec00 [size=32]
>         Capabilities: [dc] Power Management version 2
> 
> 01:07.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev
8b)
>         Subsystem: D-Link System Inc Unknown device 1405
>         Flags: bus master, medium devsel, latency 64, IRQ 74
>         I/O ports at e800 [size=256]
>         Memory at febffc00 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [44] Power Management version 2

John

2008-Oct-22 15:13 UTC

head link

[CentOS] SCSI error: return code = 0x10070000

partha chowdhury [kira.laucas at gmail.com] Writes:

Subsystem: ASUSTeK Computer Inc.
--------------------------------------
JohnStanley Writes:
Have you taken a look at asus.com for kernel modules for the USB integration
on the Asus Mother Board. They do offer drivers for various on board
controlers and NIC Cards. If perhapse they do have then you will have to
compile and install them yourself. They have gotten really decent at *nix
drivers.

John

2008-Oct-22 15:17 UTC

head link

[CentOS] SCSI error: return code = 0x10070000

I have just bought a 120GB external usb drive but after plugging it in 
it is not getting mounted.

JohnStanley Writes:

Also look in your BIOS for your USB Settings. Make sure it is Set for Legacy
Compatablity so it can run the older 1.0USB and also 2.0USB.

Reasonably Related Threads

Search for more maybe matching threads

CentOS - Oct 2008 - SCSI error: return code = 0x10070000

[CentOS] SCSI error: return code = 0x10070000

[CentOS] SCSI error: return code = 0x10070000

[CentOS] SCSI error: return code = 0x10070000

Reasonably Related Threads