Hello I'm back with another problem I made a lot of tests with my ups MGE I worked on my script upssched-cmd and i stopped several times my ups etc etc .... Suddenly my UPS wasn't be detected by my server I tried restore my system I tried modify files without success my UPS isn't detected by my serveur When I enter this command lsusb I have had no more this bus001 device 002 : ID 0463:ffff MGE UPS System UPS I have bus001 device 001 : ID 1d6b:0001 Linux Foudation 1.1 root hub When I trie to start driver I have root at nut:~# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 No matching HID UPS found Driver failed to start (exit status=1) When I use dmesg command I have this [ 320.336334] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 366.676076] usb 1-2: new low speed USB device using uhci_hcd and address 14 [ 366.800074] usb 1-2: device descriptor read/64, error -71 [ 367.028081] usb 1-2: device descriptor read/64, error -71 [ 367.244076] usb 1-2: new low speed USB device using uhci_hcd and address 15 [ 367.368072] usb 1-2: device descriptor read/64, error -71 [ 367.592072] usb 1-2: device descriptor read/64, error -71 [ 367.808071] usb 1-2: new low speed USB device using uhci_hcd and address 16 [ 368.216069] usb 1-2: device not accepting address 16, error -71 [ 368.328071] usb 1-2: new low speed USB device using uhci_hcd and address 17 [ 368.736067] usb 1-2: device not accepting address 17, error -71 [ 368.736321] hub 1-0:1.0: unable to enumerate USB device on port 2 I'm worried because I tried to connect ups on another PC I have the same problem I try a usb key lsusb is Bus 001 Device 018: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Is it possible my usb port is HS on my UPS What can I do Thanks for your help -- Sabine GOUDARD - Informatique et Multim?dia Ecole Nationale Sup?rieure d?Architecture de Saint-?tienne 1, rue Buisson BP 94 42003 Saint-?tienne Cedex 1 T?l. : 04 77 42 37 20 - Fax : 04 77 42 35 40 sabine.goudard at st-etienne.archi.fr
2010/12/3 sabine GOUDARD <sabine.goudard at st-etienne.archi.fr>> Hello > > I'm back with another problem > > I made a lot of tests with my ups MGE > > I worked on my script upssched-cmd > and i stopped several times my ups > etc etc .... > > Suddenly my UPS wasn't be detected by my server > I tried restore my system > I tried modify files > > without success > > my UPS isn't detected by my serveur > When I enter this command > lsusb > I have had no more this > bus001 device 002 : ID 0463:ffff MGE UPS System UPS > > I have > bus001 device 001 : ID 1d6b:0001 Linux Foudation 1.1 root hub > > When I trie to start driver I have > root at nut:~# upsdrvctl start > Network UPS Tools - UPS driver controller 2.4.3 > Network UPS Tools - Generic HID driver 0.34 (2.4.3) > USB communication driver 0.31 > No matching HID UPS found > Driver failed to start (exit status=1) > > When I use dmesg command I have this > [ 320.336334] hub 1-0:1.0: unable to enumerate USB device on port 2 > [ 366.676076] usb 1-2: new low speed USB device using uhci_hcd and address > 14 > [ 366.800074] usb 1-2: device descriptor read/64, error -71 > [ 367.028081] usb 1-2: device descriptor read/64, error -71 > [ 367.244076] usb 1-2: new low speed USB device using uhci_hcd and address > 15 > [ 367.368072] usb 1-2: device descriptor read/64, error -71 > [ 367.592072] usb 1-2: device descriptor read/64, error -71 > [ 367.808071] usb 1-2: new low speed USB device using uhci_hcd and address > 16 > [ 368.216069] usb 1-2: device not accepting address 16, error -71 > [ 368.328071] usb 1-2: new low speed USB device using uhci_hcd and address > 17 > [ 368.736067] usb 1-2: device not accepting address 17, error -71 > [ 368.736321] hub 1-0:1.0: unable to enumerate USB device on port 2 > > I'm worried because I tried to connect ups on another PC > I have the same problem > > I try a usb key > lsusb is > > Bus 001 Device 018: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly > Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Is it possible my usb port is HS on my UPS > > What can I do >try a hard reset: - poweroff the UPS (and the loads!) - unplug the UPS power cord, - wait ~10 seconds, - restart everything. cheers, Arnaud -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20101204/23f5417b/attachment.htm>
Thanks a lot It was the good solution I had always unplug the UPS power cord, but without delay Now all my config are ok I have another question I would want to empty my battery without stop the server is it possible ? best regards ----------------message original----------------- De: "Arnaud Quette" aquette.dev at gmail.com A: "sabine GOUDARD" sabine.goudard at st-etienne.archi.fr Copie ?: nut-upsuser at lists.alioth.debian.org Date: Sat, 4 Dec 2010 00:41:04 +0100 ---------------------------------------------------------- 2010/12/3 sabine GOUDARD <[sabine.goudard at st-etienne.archi.fr -> mailto:sabine.goudard at st-etienne.archi.fr]> Hello I'm back with another problem I made a lot of tests with my ups MGE I worked on my script upssched-cmd and i stopped several times my ups etc etc .... Suddenly my UPS wasn't be detected by my server I tried restore my system I tried modify files without success my UPS isn't detected by my serveur When I enter this command lsusb I have had no more this bus001 device 002 : ID 0463:ffff MGE UPS System UPS I have bus001 device 001 : ID 1d6b:0001 Linux Foudation 1.1 root hub When I trie to start driver I have root at nut:~# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 No matching HID UPS found Driver failed to start (exit status=1) When I use dmesg command I have this [ 320.336334] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 366.676076] usb 1-2: new low speed USB device using uhci_hcd and address 14 [ 366.800074] usb 1-2: device descriptor read/64, error -71 [ 367.028081] usb 1-2: device descriptor read/64, error -71 [ 367.244076] usb 1-2: new low speed USB device using uhci_hcd and address 15 [ 367.368072] usb 1-2: device descriptor read/64, error -71 [ 367.592072] usb 1-2: device descriptor read/64, error -71 [ 367.808071] usb 1-2: new low speed USB device using uhci_hcd and address 16 [ 368.216069] usb 1-2: device not accepting address 16, error -71 [ 368.328071] usb 1-2: new low speed USB device using uhci_hcd and address 17 [ 368.736067] usb 1-2: device not accepting address 17, error -71 [ 368.736321] hub 1-0:1.0: unable to enumerate USB device on port 2 I'm worried because I tried to connect ups on another PC I have the same problem I try a usb key lsusb is Bus 001 Device 018: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Is it possible my usb port is HS on my UPS What can I do try a hard reset: - poweroff the UPS (and the loads!) - unplug the UPS power cord, - wait ~10 seconds, - restart everything. cheers, Arnaud T -- Sabine GOUDARD - Informatique et Multim?dia Ecole Nationale Sup?rieure d?Architecture de Saint-?tienne 1, rue Buisson BP 94 42003 Saint-?tienne Cedex 1 T?l. : 04 77 42 37 20 - Fax : 04 77 42 35 40 sabine.goudard at st-etienne.archi.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20101207/fb1b311f/attachment.htm>