Nut upsuser - Nov 2010 - Shutdown script does not trigger

Dear nut users,

I am fighting to configure a smooth server shutdown with an ubuntu 
server and a dell usb ups using nut.

It seems that the drivers connect properly (upsc gives very coherent 
outputs).

However I can't get anything to happen when the ups goes on battery.

How can I be sure the the UPS status is really monitored ?
Is there a particular log file where I upsmon reports problems ?

This is how it looks right now :

root at srv# ps -elf | grep -e upsd -e upsmon -e usbhid-ups
1 S nut       1152     1  0  80   0 -  4202 poll_s 14:27 ?        
00:00:03 /lib/nut/usbhid-ups -a dell
1 S nut       1154     1  0  80   0 -  3641 poll_s 14:27 ?        
00:00:00 /sbin/upsd
1 S root      1156     1  0  80   0 -  3632 pipe_w 14:27 ?        
00:00:00 /sbin/upsmon
5 S nut       1158  1156  0  80   0 -  3632 hrtime 14:27 ?        
00:00:00 /sbin/upsmon
1 S root      1381     1  0  80   0 -  3632 pipe_w 14:34 ?        
00:00:00 upsmon
5 S nut       1383  1381  0  80   0 -  3632 hrtime 14:34 ?        
00:00:00 upsmon

-----

My nut configuration is :

/etc/nut/nut.conf :
MODE=standalone

/etc/nut/ups.conf :
[dell]
     driver = usbhid-ups
     port   = auto

/etc/nut/upsd.conf :
LISTEN 127.0.0.1 3493

/etc/nut/upsd.users :
[admin]
     password = ****
     actions = SET
     instcmds = ALL

[upsmon]
     password  = ****
     upsmon master

/etc/nut/upsmon.conf :
RUN_AS_USER nut
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
FINALDELAY 5
MONITOR dell at localhost 1 upsmon **** master

/etc/nut/upssched.conf :
CMDSCRIPT /etc/nut/sched/upssched.sh (this script exists but seems never 
to be executed...)
PIPEFN /etc/nut/sched/upssched.pipe
LOCKFN /etc/nut/sched/upssched.lock

# the timers, here 30 sec after the ONBATT (ups on battery) event
AT ONBATT * START-TIMER onbatt 30

# cancel the countdown if power is back
AT ONLINE * CANCEL-TIMER onbatt

# shuttdown on low battery
AT LOWBATT * EXECUTE lowbatt 60

# cancel the countdown if power is back
AT ONLINE * CANCEL-TIMER lowbatt

-----

I'm quite new to nut so don't hesitate to tell me if these settings 
don't make sens !

Thanks in advance,

R?mi.

On Tue, 16 Nov 2010, R?mi Lavergne wrote:
> /etc/nut/upssched.conf :
> CMDSCRIPT /etc/nut/sched/upssched.sh (this script exists but seems never to
> be executed...)
Hello R?mi, what are the ownership and permissions on file
/etc/nut/sched/upssched.sh ?  Try adding the lines

   # Debugging: Log all calls to this script
   logger -t upssched-sh Calling upssched-sh $1

at the top of upssched.sh.  You will see a trace of the script calls 
in /var/log/messages.

Roger

Citeren R?mi Lavergne <remi.lavergne op uni-tuebingen.de>:
> /etc/nut/upsmon.conf :
> RUN_AS_USER nut
> MINSUPPLIES 1
> SHUTDOWNCMD "/sbin/shutdown -h +0"
> POLLFREQ 5
> POLLFREQALERT 5
> HOSTSYNC 15
> DEADTIME 15
> POWERDOWNFLAG /etc/killpower
> RBWARNTIME 43200
> FINALDELAY 5
> MONITOR dell op localhost 1 upsmon **** master
If you need to use 'upssched', use of the NOTIFYCMD is mandatory here.  
See 'man 5 upsmon.conf'.

Best regards, Arjen
-- 
Please keep list traffic on the list (off-list replies will be rejected)