similar to: Shutdown script does not trigger

The time and upssched-cmd are now working. Here are the issues I had: 1) Did not define NOTIFYCMD in upsmon.conf Added NOTIFYCMD /sbin/upssched 2) Added +EXEC to NOTIFYMSG rules I am using 3) Change ownership of upssched.conf to my nut user nutmom. I had added nutmon to the group nut but it didn't work. Thanks again for all your guidance On Tue, Jan 28, 2020 at 7:00 AM

One last update. I needed to log out and in to get the group add of my user nutmon to be recognized. My permissions are now root:nut on upssched.conf and it works. On Tue, Jan 28, 2020 at 7:00 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to > nut-upsuser at alioth-lists.debian.net > > To subscribe or unsubscribe

If you look closer at: > pi at nutpi:~ $ sudo ls -alt /home/nutmon > total 32 > -rw------- 1 nutmon nutmon 172 Jan 26 12:32 .bash_history > drwxrwx--- 2 nutmon nutmon 4096 Jan 26 12:32 upssched there is a d in the first position of the upssched permissions showing this is a directory. This is the directory location for PIPEFN and LOCKFN as defined in

Here is the output root at nutpi:/etc/nut# ps -elf | grep -E '[n]ut|ups[dms]' 4 S avahi 246 1 0 80 0 - 1472 poll_s Jan26 ? 00:00:31 avahi-daemon: running [nutpi.local] 1 S nut 451 1 0 80 0 - 678 poll_s Jan26 ? 00:03:41 /lib/nut/upscode2 -a deltec-PRA1500 1 S nut 454 1 0 80 0 - 1173 poll_s Jan26 ? 00:00:28 /lib/nut/upsd 1

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Ok, I am running NUT in dummy mode. I have added a new ups in ups.conf [dummy] driver = dummy-ups port = upsc.dev desc = "dummy ups for testing purposes" upsc.dev has been generated by exporting the Elit configuration. I have added the monitor line in upsmon.conf and the "exec" flags (all the events) MONITOR dummy at artu 1 user pass master SHUTDOWNCMD

Roger, here is my output of ps -elf |grep upssched root at nutpi:~# ps -elf |grep upssched 0 S root 1242 1191 0 80 0 - 1834 pipe_w 05:23 pts/0 00:00:00 grep upssched No timer, just the grep of upssched.. On Mon, Jan 27, 2020 at 4:27 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to >

Hi, I have problem with upssched on windows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave

I've setup nas4free (latest version 11.0.0.4, which has NUT 2.7.4) in a VM and configured it via webinterface to my APC UPS and set "shutdown mode" to "UPS goes on battery" with a timer of 30s. Then I started runtime calibration on the UPS and after 30s nas4free has shut down! I think this is not the correct behavior, since the status was "OB CAL". The system

Was /etc/nut/upssched-cmd automatically installed? I don't have it on my raspberry pi. :-( On 2019-04-03 1:54 p.m., Mike wrote: > I figured this out and it is working now.  This fix seems strange to me > and is possibly a bug.  I'm sharing in case it might help others. > > I had to uncomment all of the NOTIFYFLAG statements whether I was > changing them or not. 

> What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines when to shut down. > > Also, if you don't want to wait for both UPSes to drain to the low battery state, you can set up a pair of dummy-ups drivers. I'm

Dear list, Can't make upssched notify me on event occured. OS: Debian, 2.6.26-1-amd64 Nut: 2.4.3-1.1squeeze1 UPS: Ippon Smart Winner 3000 connected via COM On event ( plug out the cord from UPS ) upsmon detect's status change to OB and gives WALL and syslog notify, but no script starting. In syslog no errors and no upssched process occured, just upsmon. There're no PIPE and LOCK

Group: The Background: I maintain the network hardware for a county government building that is un- occupied except for weekday dayshift. The building is located in an older section of town and the electric service has components that are nearing their 100 year lifetime. The building has UPS for all computer and network hardware and an autostart generator that starts when utilitity service

One of our summer interns has stayed on during the school year to work some weekends on special projects. This past weekend, her assignment was to trouble shoot problems with Firefox when trying to view various on-line training videos. At some web sites, the video associated with the page will not play and we get the messages shown below.? The Download statement is actually a link and was used to

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Now I have this in /etc/nut/upsmon.conf (my QNAP NAS wants admin and 123456 or not working) RUN_AS_USER root MONITOR qnapups at localhost 1 admin 123456 master MONITOR qnapups at 192.168.222.252 3493 admin 123456 slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG+EXEC

Here are my permissions and user info. Let me know if there is anything else I should check pi at nutpi:~ $ ls -alt /etc/nut total 56 drwxr-xr-x 87 root root 4096 Jan 26 15:22 .. drwxr-xr-x 2 root nut 4096 Jan 26 13:53 . -rw-r----- 1 root nut 4719 Jan 26 13:15 upssched.conf -rw-r----- 1 root nut 15347 Jan 26 11:25 upsmon.conf -rw-r----- 1 root nut 1543 Jan 26 10:02 nut.conf -rw-r-----