Hi all! I have a nut 2.4.1 on FreeBSD 7.1 i386. UPS model is IPPON smart smart power pro 2000. When i try to see battery charge, in output it have not such variable, and i can't control other servers (Win2k3 + WinNUT) because they not knows about current battery charge. How i can solve that problem? Thanks! upsc IPPON at localhost:54672 --------------------------- battery.voltage: 27.50 battery.voltage.nominal: 24.0 beeper.status: enabled driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/cuau1 driver.version: 2.4.1 driver.version.internal: 1.51 input.current.nominal: 7.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 218.5 input.voltage.fault: 219.0 input.voltage.nominal: 220 output.voltage: 217.4 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 21 ups.status: OL ups.temperature: 25.0 ups.type: offline / line interactive ups.conf -------------------- [IPPON] driver = blazer_ser port = /dev/cuau1 desc = "Ippon Smart power 2000" upsd.conf ------------------- LISTEN 127.0.0.1 54672 LISTEN 192.168.0.14 54672 MAXCONN 10 upsmon.conf ------------------- MONITOR IPPON at localhost:54672 1 monmaster UPS_PASS master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/power.shutdown NOTIFYFLAG ONLINE SYSLOG+WALL NOTIFYFLAG ONBATT SYSLOG+WALL NOTIFYFLAG LOWBATT SYSLOG+WALL NOTIFYFLAG SHUTDOWN SYSLOG+WALL RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 -- ? ?????????, vk mailto:vk at union-metall.ru
Citeren vk <vk op union-metall.ru>:> I have a nut 2.4.1 on FreeBSD 7.1 i386. UPS model is IPPON smart smart > power pro 2000. When i try to see battery charge, in output it have > not such variable, and i can't control other servers (Win2k3 + WinNUT) > because they not knows about current battery charge. How i can solve > that problem? Thanks!Read The Fine Manual (in this case, 'man 8 blazer') before asking for help. Best regards, Arjen -- Please keep list traffic on the list