Hello List
I'm trying to figure out what is wrong between my asterisk and my NEC 2400
pbx
We have been trying to link them with a spare PA-24DTG
from the NEC, I'm able to call an extension on the Asterisk, however the
extension rings, and then immediatly hangs up
I traced it back to the debug of the PRI on the Asterisk...
I would appreciate if anyone could pin point what is wrong
The error code: Cause: Mandatory information element is missing (96),
does not tell me what is missing, so any expert outthere who could give me
some direction would be extremely helpfull.
dadhichannel.conf
context=from-internal
switchtype = national
signalling = pri_net
channel => 1-23
context = default
group = 63
system.conff
span=1,1,0,esf,b8zs
# termtype: te
bchan=1-23
dchan=24
echocanceller=mg2,1-23
Thanks
*Trace:*
Enabled debugging on span 1
< Protocol Discriminator: Q.931 (8) len=27
< Call Ref: len= 2 (reference 99/0x63) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
< User information layer 1: u-Law (34)
< [18 04 e9 80 83 01]
< Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0 Exclusive
Dchan: 0
< ChanSel: As indicated in following octets
< Ext: 1 DS1 Identifier: 0
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 0 Channel: 1 ]
< [1e 02 80 81]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: User (0)
< Ext: 1 Progress Description: Call is not
end-to-end ISDN; further call progress information may be available inband.
(1) ]
< [70 05 a1 35 30 30 30]
< Called Number (len= 7) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '5000' ]
-- Making new call for cr 99
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 112 (cs0, Called Party Number)
q931.c:3551 q931_receive: call 99 on channel 1 enters state 6 (Call Present)
q931.c:2816 q931_call_proceeding: call 99 on channel 1 enters state 9
(Incoming Call Proceeding)> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 99/0x63) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0> ChanSel: As indicated in following octets
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 99/0x63) (Originator)
< Message type: STATUS (125)
< [08 03 81 e4 18]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 18 (24)
< [14 01 01]>
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call
state: Call Initiated (1)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
q931.c:2844 q931_alerting: call 99 on channel 1 enters state 7 (Call
Received)> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 99/0x63) (Terminator)
> Message type: ALERTING (1)
> [1e 02 81 88]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Private network serving the local user (1)> Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 99/0x63) (Originator)
< Message type: RELEASE (77)
< [08 03 81 e0 18]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)
< Ext: 1 Cause: Mandatory information element is missing
(96), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 18 (24)
-- Processing IE 8 (cs0, Cause)
q931.c:3801 q931_receive: call 99 on channel 1 enters state 0 (Null)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
Request> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 99/0x63) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 e0]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: Private network serving the local user (1)> Ext: 1 Cause: Mandatory information element is missing
(96), class = Protocol Error (e.g. unknown message) (6) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20100113/2c552316/attachment.htm
