thr3ads.net - asterisk users - [Asterisk-Users] hangup lag causing the answering of already answered calls [Jun 2006]

If this information is useful, please help other people find it:
Share via:

Carey O'Shea

2006-Jun-08 21:43 UTC

[Asterisk-Users] hangup lag causing the answering of already answered calls

I have a TDM-400P with one FXO module. On an incoming call, I have set
Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)), which is
basically the only thing in my dialplan.

When the call is answered by the PSTN phone first, or when the ringing
call is hung up, Asterisk keeps ringing for 5+ seconds, which causes
trouble (the answering of already answered calls).

I noticed in the Asterisk console that my phone is called twice every
time there is an incoming call. Is this normal, and could it be causing
this behaviour?

If not, any ideas as to what could be causing this? I can provide full
debug logs and my relevant configuration if needed.

Console log:

    -- Starting simple switch on 'Zap/4-1'
    -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack
    -- Called carey
    -- Starting simple switch on 'Zap/4-1'
    -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack
    -- Called carey
    -- Call accepted by 10.0.12.102 (format ulaw)
    -- Format for call is ulaw
    -- Call accepted by 10.0.12.102 (format ulaw)
    -- Format for call is ulaw
    -- IAX2/carey-1 is ringing
    -- IAX2/carey-1 is ringing
    -- Hungup 'IAX2/carey-1'
  == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1'
    -- Hungup 'Zap/4-1'
    -- Hungup 'IAX2/carey-1'
  == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/4-1'
    -- Hungup 'Zap/4-1'

undrhil.1528785@bloglines.com

2006-Jun-08 21:54 UTC

head link

[Asterisk-Users] hangup lag causing the answering of already answered calls

So, your dialplan for that incoming call is just the one line?

exten =>
s,1,Dial(IAX2/carey)

Nothing else?  Try adding a Hangup command on the
next priority and see if that helps any.

exten => s,2,Hangup

If you
already have a Hangup command in there, then I apologize for wasting your
time.  :)

Undrhil

--- Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com wrote:
I have a TDM-400P with one FXO module.
On an incoming call, I have set> Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)),
which is> basically the only thing in my dialplan.
> 
> When the call
is answered by the PSTN phone first, or when the ringing> call is hung up,
Asterisk keeps ringing for 5+ seconds, which causes> trouble (the answering
of already answered calls).> 
> I noticed in the Asterisk console that
my phone is called twice every> time there is an incoming call. Is this
normal, and could it be causing> this behaviour?
> 
> If not, any ideas
as to what could be causing this? I can provide full> debug logs and my
relevant configuration if needed.> 
> Console log:
> 
>     -- Starting
simple switch on 'Zap/4-1'>     -- Executing Dial("Zap/4-1", "IAX2/carey")
in new stack>     -- Called carey
>     -- Starting simple switch on 'Zap/4-1'
>     -- Executing Dial("Zap/4-1", "IAX2/carey") in new
stack
>     -- Called
carey>     -- Call accepted by 10.0.12.102 (format ulaw)
>     -- Format
for call is ulaw>     -- Call accepted by 10.0.12.102 (format ulaw)
> 
   -- Format for call is ulaw>     -- IAX2/carey-1 is ringing
>     --
IAX2/carey-1 is ringing>     -- Hungup 'IAX2/carey-1'
>   == Spawn extension
(incoming, s, 1) exited non-zero on 'Zap/4-1'>     -- Hungup 'Zap/4-1'
>     -- Hungup 'IAX2/carey-1'
>   == Spawn extension (incoming, s, 1) exited
non-zero on 'Zap/4-1'>     -- Hungup 'Zap/4-1'
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users
mailing list> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

mrlord chewie

2006-Jun-11 21:17 UTC

head link

[Asterisk-Users] hangup lag causing the answering of already answered calls

I'm having the exact same problem. Please any ideas? My IP phones keep
ringing after PSTN hangup or PSTN answer... for about 6 or 7 seconds.

On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote:  
Does anyone have any ideas as to what can cause this large delay to stop
ringing?

It's quite a show stopper... imagine ringing a business and being
answered by 3 different people, one after the other, all talking over
the top of each other.

On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea
wrote:> Hi Undrhil,
> 
> A logical idea, but unfortunately adding it didn't change anything.
> 
> Two important points:
> (1) When I test this with just IAX endpoints, no Zap, the call is hungup
> immediately, (2) but the console still shows the user being called
> twice.
> 
> So as a wild guess, maybe the console logging twice is OK, and it's my
> Zap configuration?
> 
> * extensions.conf:
> [incoming]
> exten => s,1,Dial(IAX2/carey)
> exten => s,2,Hangup(IAX2/carey)
> 
> * zapata.conf:
> [channels]
> usecallerid=no
> signalling=fxs_ks
> context=incoming
> channel => 4 
> 
> * zaptel.conf
> loadzone=au
> defaultzone=au
> fxsks=4
> 
> * ztcfg -vv
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
> 1 channels configured.
> 
> I'm from Australia so I assume the loadzone and defaultzone is OK as
per
> zaptel.c. Did not post iax.conf due to my SIP phones having the same
> behaviour, and IAX-to-IAX not exhibiting the problem.
> 
> 
> On Fri, 2006-06-09 at 04:54 +0000, undrhil.1528785@bloglines.com wrote:
> > So, your dialplan for that incoming call is just the one line?
> > 
> > exten =>
> > s,1,Dial(IAX2/carey)
> > 
> > Nothing else?  Try adding a Hangup command on the
> > next priority and see if that helps any.
> > 
> > exten => s,2,Hangup
> > 
> > If you
> > already have a Hangup command in there, then I apologize for wasting
your
> > time.  :)
> > 
> > Undrhil
> > 
> > --- Asterisk Users Mailing List - Non-Commercial Discussion
> > <asterisk-users@lists.digium.com wrote:
> > I have a TDM-400P with one FXO module.
> > On an incoming call, I have set
> > > Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)),
> > which is
> > > basically the only thing in my dialplan.
> > > 
> > > When the call
> > is answered by the PSTN phone first, or when the ringing
> > > call is hung up,
> > Asterisk keeps ringing for 5+ seconds, which causes
> > > trouble (the answering
> > of already answered calls).
> > > 
> > > I noticed in the Asterisk console that
> > my phone is called twice every
> > > time there is an incoming call. Is this
> > normal, and could it be causing
> > > this behaviour?
> > > 
> > > If not, any ideas
> > as to what could be causing this? I can provide full
> > > debug logs and my
> > relevant configuration if needed.
> > > 
> > > Console log:
> > > 
> > >     -- Starting
> > simple switch on 'Zap/4-1'
> > >     -- Executing Dial("Zap/4-1",
"IAX2/carey")
> > in new stack
> > >     -- Called carey
> > >     -- Starting simple switch on 'Zap/4-1'
> > 
> > >     -- Executing Dial("Zap/4-1",
"IAX2/carey") in new stack
> > >     -- Called
> > carey
> > >     -- Call accepted by 10.0.12.102 (format ulaw)
> > >     -- Format
> > for call is ulaw
> > >     -- Call accepted by 10.0.12.102 (format ulaw)
> > > 
> >    -- Format for call is ulaw
> > >     -- IAX2/carey-1 is ringing
> > >     --
> > IAX2/carey-1 is ringing
> > >     -- Hungup 'IAX2/carey-1'
> > >   == Spawn extension
> > (incoming, s, 1) exited non-zero on 'Zap/4-1'
> > >     -- Hungup 'Zap/4-1'
> > >     -- Hungup 'IAX2/carey-1'
> > >   == Spawn extension (incoming, s, 1) exited
> > non-zero on 'Zap/4-1'
> > >     -- Hungup 'Zap/4-1'
> > > 
> > On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote:
 
Does anyone have any ideas as to what can cause this large delay to stop
ringing?

It's quite a show stopper... imagine ringing a business and being
answered by 3 different people, one after the other, all talking over
the top of each other.

On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea
wrote:> Hi Undrhil,
> 
> A logical idea, but unfortunately adding it didn't change anything.
> 
> Two important points:
> (1) When I test this with just IAX endpoints, no Zap, the call is hungup
> immediately, (2) but the console still shows the user being called
> twice.
> 
> So as a wild guess, maybe the console logging twice is OK, and it's my
> Zap configuration?
> 
> * extensions.conf:
> [incoming]
> exten => s,1,Dial(IAX2/carey)
> exten => s,2,Hangup(IAX2/carey)
> 
> * zapata.conf:
> [channels]
> usecallerid=no
> signalling=fxs_ks
> context=incoming
> channel => 4 
> 
> * zaptel.conf
> loadzone=au
> defaultzone=au
> fxsks=4
> 
> * ztcfg -vv
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
> 1 channels configured.
> 
> I'm from Australia so I assume the loadzone and defaultzone is OK as
per
> zaptel.c. Did not post iax.conf due to my SIP phones having the same
> behaviour, and IAX-to-IAX not exhibiting the problem.
> 
> 
> On Fri, 2006-06-09 at 04:54 +0000, undrhil.1528785@bloglines.com wrote:
> > So, your dialplan for that incoming call is just the one line?
> > 
> > exten =>
> > s,1,Dial(IAX2/carey)
> > 
> > Nothing else?  Try adding a Hangup command on the
> > next priority and see if that helps any.
> > 
> > exten => s,2,Hangup
> > 
> > If you
> > already have a Hangup command in there, then I apologize for wasting
your
> > time.  :)
> > 
> > Undrhil
> > 
> > --- Asterisk Users Mailing List - Non-Commercial Discussion
> > <asterisk-users@lists.digium.com wrote:
> > I have a TDM-400P with one FXO module.
> > On an incoming call, I have set
> > > Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)),
> > which is
> > > basically the only thing in my dialplan.
> > > 
> > > When the call
> > is answered by the PSTN phone first, or when the ringing
> > > call is hung up,
> > Asterisk keeps ringing for 5+ seconds, which causes
> > > trouble (the answering
> > of already answered calls).
> > > 
> > > I noticed in the Asterisk console that
> > my phone is called twice every
> > > time there is an incoming call. Is this
> > normal, and could it be causing
> > > this behaviour?
> > > 
> > > If not, any ideas
> > as to what could be causing this? I can provide full
> > > debug logs and my
> > relevant configuration if needed.
> > > 
> > > Console log:
> > > 
> > >     -- Starting
> > simple switch on 'Zap/4-1'
> > >     -- Executing Dial("Zap/4-1",
"IAX2/carey")
> > in new stack
> > >     -- Called carey
> > >     -- Starting simple switch on 'Zap/4-1'
> > 
> > >     -- Executing Dial("Zap/4-1",
"IAX2/carey") in new stack
> > >     -- Called
> > carey
> > >     -- Call accepted by 10.0.12.102 (format ulaw)
> > >     -- Format
> > for call is ulaw
> > >     -- Call accepted by 10.0.12.102 (format ulaw)
> > > 
> >    -- Format for call is ulaw
> > >     -- IAX2/carey-1 is ringing
> > >     --
> > IAX2/carey-1 is ringing
> > >     -- Hungup 'IAX2/carey-1'
> > >   == Spawn extension
> > (incoming, s, 1) exited non-zero on 'Zap/4-1'
> > >     -- Hungup 'Zap/4-1'
> > >     -- Hungup 'IAX2/carey-1'
> > >   == Spawn extension (incoming, s, 1) exited
> > non-zero on 'Zap/4-1'
> > >     -- Hungup 'Zap/4-1'


   
  
 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060611/c6f96d3d/attachment.htm

Seemingly Similar Threads

Search for more possibly parallel threads

asterisk users - Jun 2006 - hangup lag causing the answering of already answered calls

[Asterisk-Users] hangup lag causing the answering of already answered calls

[Asterisk-Users] hangup lag causing the answering of already answered calls

[Asterisk-Users] hangup lag causing the answering of already answered calls

Seemingly Similar Threads