I am trying to use misdn insted of zaphfc to drive two billion isdn cards
zaphfc is ok, but the problem with cdr and the fact tha you always have to
wait the bristuffed version of asterisk took me to
try another way.
so I downloaded the misdn installation script from beronet for the last
version ( I am using asterisk stable 1.2, so now is 1.2.5)
wget http://www.beronet.com/downloads/install-misdn-mqueue.tar.gz
tar -zxvf install-misdn-mqueue.tar.gz
cd /usr/src/install-misdn-mqueue
make
make install
everything OK
/etc/init.d/misdn-init scan
/etc/init.d/misdn-init config
/etc/init.d/misdn-init start
everything OK
then I modify the /etc/asterisk/misdn.conf, in a very standard way:
[general]
debug=0
method=standard
append_digits2exten=yes
bridging=yes
;tracefile=/var/log/asterisk/misdn.trace
[default]
immediate=yes
callgroup=1
pickupgroup=1
context=default
language=it
;nationalprefix=0
;internationalprefix=00
rxgain=0
txgain=0
dialplan=0
[TEports]
ports=1,2
context=from-pstn
msns=*
~
then:
chmod 755 /usr/lib/asterisk/modules
chown asterisk /dev/mISDN* -R
everything still OK
amportal start (I am using AMP )
OK.
when I try to access an external line, asterisk crashes with a segmentation
fault;
the dial string is correct
...
-- Executing GotoIf("SIP/567-bb09", "1?20:21") in new
stack
-- Goto (macro-dialout-trunk,s,20)
-- Executing SetVar("SIP/567-bb09",
"the_num=3481303063") in new stack
-- Executing Dial("SIP/567-bb09", "misdn/1/3481303063")
in new stack
-- Called 1/3481303063
Ouch ... error while writing audio data: : Broken pipe
Segmentation fault (core dumped)
I am using Suse Linux 10, and I switched to default kernel (not SMP)
asterisk@asterisk01:~> uname -r
2.6.13-15.8-default
Any help will be gratly appreciated.
by the way: I read it could be possible to use chan_capi insted of
chan_misdn, laying on misdn: is it correct: ?
And if it is, could anybody give me an advice on how ? I tried the 0.6.4
chan_capi version I succesfully installed on anothe box with Fritz!,
but in that case the capi driver for Fritz was present.
thank in advance,
Andrea
Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.
Visitate il sito http://www.frameweb.it
asterisk-users-bounces@lists.digium.com wrote on 15.03.2006 14:37:27:> I am trying to use misdn insted of zaphfc to drive two billion isdncards> zaphfc is ok, but the problem with cdr and the fact tha you always haveto> wait the bristuffed version of asterisk took me to > try another way. > so I downloaded the misdn installation script from beronet for the last > version ( I am using asterisk stable 1.2, so now is 1.2.5) > wget http://www.beronet.com/downloads/install-misdn-mqueue.tar.gz > > tar -zxvf install-misdn-mqueue.tar.gz > cd /usr/src/install-misdn-mqueue > make > make install > everything OK > > /etc/init.d/misdn-init scan > > /etc/init.d/misdn-init config > > /etc/init.d/misdn-init start > everything OK > > then I modify the /etc/asterisk/misdn.conf, in a very standard way: > > [general] > debug=0 > method=standard > append_digits2exten=yes > bridging=yes > ;tracefile=/var/log/asterisk/misdn.trace > > [default] > immediate=yes > callgroup=1 > pickupgroup=1 > context=default > language=it > ;nationalprefix=0 > ;internationalprefix=00 > rxgain=0 > txgain=0 > dialplan=0 > > [TEports] > ports=1,2 > context=from-pstn > msns=* > ~ > > then: > > chmod 755 /usr/lib/asterisk/modules > > chown asterisk /dev/mISDN* -R > everything still OK > > amportal start (I am using AMP ) > > OK. > when I try to access an external line, asterisk crashes with asegmentation> fault; > the dial string is correct > ... > -- Executing GotoIf("SIP/567-bb09", "1?20:21") in new stack > -- Goto (macro-dialout-trunk,s,20) > -- Executing SetVar("SIP/567-bb09", "the_num=3481303063") in newstack> -- Executing Dial("SIP/567-bb09", "misdn/1/3481303063") in new stack > -- Called 1/3481303063 > Ouch ... error while writing audio data: : Broken pipe > Segmentation fault (core dumped) > > I am using Suse Linux 10, and I switched to default kernel (not SMP) > asterisk@asterisk01:~> uname -r > 2.6.13-15.8-default > > Any help will be gratly appreciated. > by the way: I read it could be possible to use chan_capi insted of > chan_misdn, laying on misdn: is it correct: ? > > And if it is, could anybody give me an advice on how ? I tried the 0.6.4 > chan_capi version I succesfully installed on anothe box with Fritz!, > but in that case the capi driver for Fritz was present. > > thank in advance, > Andreamaybe try to dial via Dial(misdn/g:TEports/${EXTEN}) inside extensions.conf I encountered a few asterisk-crashes with mISDN as well as it seems misdn doesn't like digital calls at all and is crashing in this case... yes, it's possible to use chan_capi via misdn/capi you just have to add entries for the hfc-cards to your /etc/capi.conf
Thank you for your answer.
I tried that syntax with misdn/g:TEports/${EXTEN}, but nothing changes.
what should I write in the /etc/capi.conf ?
If I had a Fritz, I would have
#SuSEconfig.isdn generated
# card file proto io irq mem cardnr options
fcpci - - - - - 1
but having 2 billion ??? what to write ?
Andrea
DRi@b-w-computer.
de
Sent by: To
asterisk-users-bo Asterisk Users Mailing List -
unces@lists.digiu Non-Commercial Discussion
m.com <asterisk-users@lists.digium.com>
cc
15/03/2006 14.56 Subject
Re: [Asterisk-Users] misdn problem
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users@l
ists.digium.com>
asterisk-users-bounces@lists.digium.com wrote on 15.03.2006 14:37:27:
> I am trying to use misdn insted of zaphfc to drive two billion isdn
cards> zaphfc is ok, but the problem with cdr and the fact tha you always have
to> wait the bristuffed version of asterisk took me to
> try another way.
> so I downloaded the misdn installation script from beronet for the last
> version ( I am using asterisk stable 1.2, so now is 1.2.5)
> wget http://www.beronet.com/downloads/install-misdn-mqueue.tar.gz
>
> tar -zxvf install-misdn-mqueue.tar.gz
> cd /usr/src/install-misdn-mqueue
> make
> make install
> everything OK
>
> /etc/init.d/misdn-init scan
>
> /etc/init.d/misdn-init config
>
> /etc/init.d/misdn-init start
> everything OK
>
> then I modify the /etc/asterisk/misdn.conf, in a very standard way:
>
> [general]
> debug=0
> method=standard
> append_digits2exten=yes
> bridging=yes
> ;tracefile=/var/log/asterisk/misdn.trace
>
> [default]
> immediate=yes
> callgroup=1
> pickupgroup=1
> context=default
> language=it
> ;nationalprefix=0
> ;internationalprefix=00
> rxgain=0
> txgain=0
> dialplan=0
>
> [TEports]
> ports=1,2
> context=from-pstn
> msns=*
> ~
>
> then:
>
> chmod 755 /usr/lib/asterisk/modules
>
> chown asterisk /dev/mISDN* -R
> everything still OK
>
> amportal start (I am using AMP )
>
> OK.
> when I try to access an external line, asterisk crashes with a
segmentation> fault;
> the dial string is correct
> ...
> -- Executing GotoIf("SIP/567-bb09", "1?20:21") in
new stack
> -- Goto (macro-dialout-trunk,s,20)
> -- Executing SetVar("SIP/567-bb09",
"the_num=3481303063") in new
stack> -- Executing Dial("SIP/567-bb09",
"misdn/1/3481303063") in new stack
> -- Called 1/3481303063
> Ouch ... error while writing audio data: : Broken pipe
> Segmentation fault (core dumped)
>
> I am using Suse Linux 10, and I switched to default kernel (not SMP)
> asterisk@asterisk01:~> uname -r
> 2.6.13-15.8-default
>
> Any help will be gratly appreciated.
> by the way: I read it could be possible to use chan_capi insted of
> chan_misdn, laying on misdn: is it correct: ?
>
> And if it is, could anybody give me an advice on how ? I tried the 0.6.4
> chan_capi version I succesfully installed on anothe box with Fritz!,
> but in that case the capi driver for Fritz was present.
>
> thank in advance,
> Andrea
maybe try to dial via Dial(misdn/g:TEports/${EXTEN}) inside
extensions.conf
I encountered a few asterisk-crashes with mISDN as well
as it seems misdn doesn't like digital calls at all and is crashing in
this case...
yes, it's possible to use chan_capi via misdn/capi you just have to add
entries for the hfc-cards to your /etc/capi.conf
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.
Visitate il sito http://www.frameweb.it
I have two HFC ISDN Cards, configured using mISDN on asterisk svn head 1.2 These two cards are connected to 2 ISDN Lines, receiving calls for 50 numbers. Everything is OK on 75 % and bad on 25 % When is bad, In /var/log/asterisk/full I see May 26 09:55:28 WARNING[24410] chan_misdn.c: Extension can never match, so disconnecting May 26 09:55:28 DEBUG[24410] channel.c: Prodding channel 'mISDN/1-1' May 26 09:55:28 DEBUG[24410] channel.c: Scheduling timer at 160 sample intervals May 26 09:55:28 WARNING[24410] chan_misdn.c: Extension can never match, so disconnecting May 26 09:55:28 DEBUG[24410] channel.c: Prodding channel 'mISDN/2-1' May 26 09:55:28 DEBUG[24410] channel.c: Scheduling timer at 160 sample intervals on the asterisk console, if I set misdn set debug 10, I see P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082 P[ 1] --> lib: NEW_CR Ind with l3id:200ec on this port. P[ 1] --> new_process: New L3Id: 200ec P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582 P[ 1] set_channel: bc->channel:0 channel:1 P[ 1] lib Got Prim: Addr 42000103 prim 30582 dinfo 200ec P[ 1] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550 P[ 0] $$$ find_chan: No channel found with l3id:200ec P[ 1] I IND :SETUP oad:3481303064 dad:0108680550 P[ 1] --> mode:TE cause:16 ocause:16 rad: P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE P[ 1] --> info_dad: onumplan:0 dnumplan:2 rnumplan: P[ 1] --> screen:0 --> pres:0 P[ 1] --> channel:1 caps:Speech pi:0 keypad: P[ 1] --> urate:0 rate:16 mode:0 user1:0 P[ 1] --> pid:336 addr:50010102 l3id:200ec P[ 1] --> b_stid:0 layer_id:50010180 P[ 1] --> bc:81681d4 h:0 sh:0 P[ 1] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550 P[ 1] --> Bearer: Speech P[ 1] --> Codec: Alaw P[ 0] --> * NEW CHANNEL dad:0108680550 oad:3481303064 P[ 1] read_config: Getting Config P[ 1] config_jb: Called P[ 1] --> * CallGrp: PickupGrp: P[ 1] * Queuing chan 0x842e8b0 P[ 1] CONTEXT:from-pstn P[ 1] Tone Indicate: P[ 1] --> Busy P[ 1] misdn_write: * prods us P[ 1] SENDEVENT: stack->nt:0 stack->uperid:40000104 P[ 1] I SEND:DISCONNECT oad:3481303064 dad:00108680550 P[ 1] --> mode:TE cause:16 ocause:1 rad: P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE P[ 1] --> info_dad: onumplan:0 dnumplan:2 rnumplan: P[ 1] --> screen:0 --> pres:0 P[ 1] --> channel:1 caps:Speech pi:0 keypad: P[ 1] --> urate:0 rate:16 mode:0 user1:0 P[ 1] --> pid:336 addr:50010102 l3id:200ec P[ 1] --> b_stid:0 layer_id:50010180 P[ 1] --> bc:81681d4 h:0 sh:0 P[ 1] GOT SETUP OK P[ 1] Freeing Msg on prim:30582 P[ 2] handle_frm: frm->addr:42000203 frm->prim:3f082 P[ 2] --> lib: NEW_CR Ind with l3id:40076 on this port. P[ 2] --> new_process: New L3Id: 40076 P[ 2] handle_frm: frm->addr:42000203 frm->prim:30582 P[ 2] set_channel: bc->channel:0 channel:1 P[ 2] lib Got Prim: Addr 42000203 prim 30582 dinfo 40076 P[ 2] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550 P[ 1] $$$ find_chan: No channel found with l3id:40076 P[ 2] I IND :SETUP oad:3481303064 dad:0108680550 P[ 2] --> mode:TE cause:16 ocause:16 rad: P[ 2] --> facility:FAC_NONE out_facility:FAC_NONE P[ 2] --> info_dad: onumplan:0 dnumplan:2 rnumplan: P[ 2] --> screen:0 --> pres:0 P[ 2] --> channel:1 caps:Speech pi:0 keypad: P[ 2] --> urate:0 rate:16 mode:0 user1:0 P[ 2] --> pid:337 addr:50010202 l3id:40076 P[ 2] --> b_stid:0 layer_id:50010280 P[ 2] --> bc:8173dec h:0 sh:0 P[ 2] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550 P[ 2] --> Bearer: Speech P[ 2] --> Codec: Alaw P[ 0] --> * NEW CHANNEL dad:0108680550 oad:3481303064 P[ 2] read_config: Getting Config P[ 2] config_jb: Called P[ 2] --> * CallGrp: PickupGrp: P[ 2] * Queuing chan 0x84a8ea0 P[ 2] CONTEXT:from-pstn P[ 2] Tone Indicate: P[ 2] --> Busy P[ 2] misdn_write: * prods us P[ 2] SENDEVENT: stack->nt:0 stack->uperid:40000204 P[ 2] I SEND:DISCONNECT oad:3481303064 dad:00108680550 P[ 2] --> mode:TE cause:16 ocause:1 rad: P[ 2] --> facility:FAC_NONE out_facility:FAC_NONE P[ 2] --> info_dad: onumplan:0 dnumplan:2 rnumplan: P[ 2] --> screen:0 --> pres:0 P[ 2] --> channel:1 caps:Speech pi:0 keypad: P[ 2] --> urate:0 rate:16 mode:0 user1:0 P[ 2] --> pid:337 addr:50010202 l3id:40076 P[ 2] --> b_stid:0 layer_id:50010280 P[ 2] --> bc:8173dec h:0 sh:0 P[ 2] GOT SETUP OK P[ 2] Freeing Msg on prim:30582 P[ 2] MGMT: Short status dinfo 2000001 P[ 2] MGMT: SSTATUS: L2_ESTABLISH all the (4) channels were idle at call time. Thanks in advance Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla. Visitate il sito http://www.frameweb.it
In my extension.conf I have both
[ext-did]
include => ext-did-custom
exten => 0108680550,1,Set(FROM_DID=0108680550)
exten => 0108680550,n,Set(FAX_RX=disabled)
exten => 0108680550,n,Goto(timeconditions,3,1)
exten => _01086805XX,1,Set(FROM_DID=_01086805XX)
exten => _01086805XX,n,Set(FAX_RX=disabled)
exten => _01086805XX,n,Goto(custom-did-route,${EXTEN},1)
and later:
[custom-did-route]
exten => _01086805XX,1,Set(FROM_DID=${EXTEN})
exten => _01086805XX,2,Macro(exten-vm,${EXTEN:7},${EXTEN:7})
exten => _01086805XX,3,VoiceMail(500@default|u)
; ATTENZIONE !!!!! E' necessario remmare una riga in extensions.conf
;exten => exit-FAILED,n,Hangup()
; in [macro-vm]
;
The point is that the dial plan is correct; if it were not, ALL calls
should be lost,
not about 25% dialing the same number;
Insted, you can see ringing BOTH channel 1 of BOTH ISDN Cards; adding
immediate=yes in misdn.conf
seems to slow down the problem, but not completly solve it.
thanks,
Andrea
Tommaso Calosi
<tommaso.calosi.l
ist@sysmic.it> To
Sent by: Asterisk Users Mailing List -
asterisk-users-bo Non-Commercial Discussion
unces@lists.digiu <asterisk-users@lists.digium.com>
m.com cc
Subject
29/05/2006 10.47 Re: [Asterisk-Users] misdn problem
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users@l
ists.digium.com>
In your extension.conf, in the misdn context you defined in
/etc/asterisk/misdn.conf you have to add something linke the following line
[from-pstn]
exten => 0108680550,1,Dial(SIP/201)
If you don't want to have to write a string for each called extension,
you can put something like. Obviously SIP/201 is the phone you wish to
ring.
[from-pstn]
exten => _XXXX.,1,Dial(SIP/201)
asterisk@frameweb.it wrote:> I have two HFC ISDN Cards, configured using mISDN on asterisk svn head
1.2>
> These two cards are connected to 2 ISDN Lines, receiving calls for 50
> numbers.
>
> Everything is OK on 75 % and bad on 25 %
>
> When is bad, In /var/log/asterisk/full I see
>
> May 26 09:55:28 WARNING[24410] chan_misdn.c: Extension can never match,
so> disconnecting
> May 26 09:55:28 DEBUG[24410] channel.c: Prodding channel
'mISDN/1-1'
> May 26 09:55:28 DEBUG[24410] channel.c: Scheduling timer at 160 sample
> intervals
> May 26 09:55:28 WARNING[24410] chan_misdn.c: Extension can never match,
so> disconnecting
> May 26 09:55:28 DEBUG[24410] channel.c: Prodding channel
'mISDN/2-1'
> May 26 09:55:28 DEBUG[24410] channel.c: Scheduling timer at 160 sample
> intervals
>
> on the asterisk console, if I set misdn set debug 10, I see
>
> P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082
> P[ 1] --> lib: NEW_CR Ind with l3id:200ec on this port.
> P[ 1] --> new_process: New L3Id: 200ec
> P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582
> P[ 1] set_channel: bc->channel:0 channel:1
> P[ 1] lib Got Prim: Addr 42000103 prim 30582 dinfo 200ec
> P[ 1] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550
> P[ 0] $$$ find_chan: No channel found with l3id:200ec
> P[ 1] I IND :SETUP oad:3481303064 dad:0108680550
> P[ 1] --> mode:TE cause:16 ocause:16 rad:
> P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
> P[ 1] --> info_dad: onumplan:0 dnumplan:2 rnumplan:
> P[ 1] --> screen:0 --> pres:0
> P[ 1] --> channel:1 caps:Speech pi:0 keypad:
> P[ 1] --> urate:0 rate:16 mode:0 user1:0
> P[ 1] --> pid:336 addr:50010102 l3id:200ec
> P[ 1] --> b_stid:0 layer_id:50010180
> P[ 1] --> bc:81681d4 h:0 sh:0
> P[ 1] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550
> P[ 1] --> Bearer: Speech
> P[ 1] --> Codec: Alaw
> P[ 0] --> * NEW CHANNEL dad:0108680550 oad:3481303064
> P[ 1] read_config: Getting Config
> P[ 1] config_jb: Called
> P[ 1] --> * CallGrp: PickupGrp:
> P[ 1] * Queuing chan 0x842e8b0
> P[ 1] CONTEXT:from-pstn
> P[ 1] Tone Indicate:
> P[ 1] --> Busy
> P[ 1] misdn_write: * prods us
> P[ 1] SENDEVENT: stack->nt:0 stack->uperid:40000104
> P[ 1] I SEND:DISCONNECT oad:3481303064 dad:00108680550
> P[ 1] --> mode:TE cause:16 ocause:1 rad:
> P[ 1] --> facility:FAC_NONE out_facility:FAC_NONE
> P[ 1] --> info_dad: onumplan:0 dnumplan:2 rnumplan:
> P[ 1] --> screen:0 --> pres:0
> P[ 1] --> channel:1 caps:Speech pi:0 keypad:
> P[ 1] --> urate:0 rate:16 mode:0 user1:0
> P[ 1] --> pid:336 addr:50010102 l3id:200ec
> P[ 1] --> b_stid:0 layer_id:50010180
> P[ 1] --> bc:81681d4 h:0 sh:0
> P[ 1] GOT SETUP OK
> P[ 1] Freeing Msg on prim:30582
> P[ 2] handle_frm: frm->addr:42000203 frm->prim:3f082
> P[ 2] --> lib: NEW_CR Ind with l3id:40076 on this port.
> P[ 2] --> new_process: New L3Id: 40076
> P[ 2] handle_frm: frm->addr:42000203 frm->prim:30582
> P[ 2] set_channel: bc->channel:0 channel:1
> P[ 2] lib Got Prim: Addr 42000203 prim 30582 dinfo 40076
> P[ 2] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550
> P[ 1] $$$ find_chan: No channel found with l3id:40076
> P[ 2] I IND :SETUP oad:3481303064 dad:0108680550
> P[ 2] --> mode:TE cause:16 ocause:16 rad:
> P[ 2] --> facility:FAC_NONE out_facility:FAC_NONE
> P[ 2] --> info_dad: onumplan:0 dnumplan:2 rnumplan:
> P[ 2] --> screen:0 --> pres:0
> P[ 2] --> channel:1 caps:Speech pi:0 keypad:
> P[ 2] --> urate:0 rate:16 mode:0 user1:0
> P[ 2] --> pid:337 addr:50010202 l3id:40076
> P[ 2] --> b_stid:0 layer_id:50010280
> P[ 2] --> bc:8173dec h:0 sh:0
> P[ 2] $$$ find_chan: No channel found for oad:3481303064 dad:0108680550
> P[ 2] --> Bearer: Speech
> P[ 2] --> Codec: Alaw
> P[ 0] --> * NEW CHANNEL dad:0108680550 oad:3481303064
> P[ 2] read_config: Getting Config
> P[ 2] config_jb: Called
> P[ 2] --> * CallGrp: PickupGrp:
> P[ 2] * Queuing chan 0x84a8ea0
> P[ 2] CONTEXT:from-pstn
> P[ 2] Tone Indicate:
> P[ 2] --> Busy
> P[ 2] misdn_write: * prods us
> P[ 2] SENDEVENT: stack->nt:0 stack->uperid:40000204
> P[ 2] I SEND:DISCONNECT oad:3481303064 dad:00108680550
> P[ 2] --> mode:TE cause:16 ocause:1 rad:
> P[ 2] --> facility:FAC_NONE out_facility:FAC_NONE
> P[ 2] --> info_dad: onumplan:0 dnumplan:2 rnumplan:
> P[ 2] --> screen:0 --> pres:0
> P[ 2] --> channel:1 caps:Speech pi:0 keypad:
> P[ 2] --> urate:0 rate:16 mode:0 user1:0
> P[ 2] --> pid:337 addr:50010202 l3id:40076
> P[ 2] --> b_stid:0 layer_id:50010280
> P[ 2] --> bc:8173dec h:0 sh:0
> P[ 2] GOT SETUP OK
> P[ 2] Freeing Msg on prim:30582
> P[ 2] MGMT: Short status dinfo 2000001
> P[ 2] MGMT: SSTATUS: L2_ESTABLISH
>
> all the (4) channels were idle at call time.
>
> Thanks in advance
>
> Andrea
>
> Chi ricevesse questa mail per errore e' gentilmente pregato di
cancellarla.>
> Visitate il sito http://www.frameweb.it
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.
Visitate il sito http://www.frameweb.it
Apparently Analagous Threads
- BN8S0 problem - Extension can never match, so disconnecting
- set caller id on outgoing calls through BRI ISDNlines
- set caller id on outgoing calls through BRIISDNlines
- mISDN trouble with a HFC Cologne card, Asterisk Asterisk 1.2.4 on Linux 2.6.16.11 - incoming DTMF detection
- *, BeroNet BN4S0 and misdn - problems