Brent Torrenga
2006-Jan-31 14:19 UTC
[Asterisk-Users] Teliax - Codec Preference effective?
Has anyone had problems getting their preffered codecs on the Teliax web interface taking effect? I have two accounts, two separate yet similarly configured * servers. On one account the settings took right away - on another server I am getting no result. In fact, no matter what I change the settings to, only the old codecs are usable (otherwise * says it can't negotiate a codec). Teliax support says it is an * bug, but I think contrary... One * box works, one doesn't... Same config... Anyone else? Sincerely, Brent A. Torrenga brent.torrenga@torrenga.com Torrenga Engineering, Inc. 907 Ridge Road Munster, Indiana 46321-1771 219.836.8918x325 Voice 219.836.1138 Facsimile www.torrenga.com
I use Teliax for 2 different businesses; 1 uses ulaw and the other uses g729. I didn't set anything in the Teliax control panel, I just set everything on the Asterisk box; works great for me. Is there a reason you're setting it @ Teliax and not in the Asterisk box? (excuse this question if it's a dumb one) -ross -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Brent Torrenga Sent: Tuesday, January 31, 2006 3:20 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Teliax - Codec Preference effective? Has anyone had problems getting their preffered codecs on the Teliax web interface taking effect? I have two accounts, two separate yet similarly configured * servers. On one account the settings took right away - on another server I am getting no result. In fact, no matter what I change the settings to, only the old codecs are usable (otherwise * says it can't negotiate a codec). Teliax support says it is an * bug, but I think contrary... One * box works, one doesn't... Same config... Anyone else? Sincerely, Brent A. Torrenga brent.torrenga@torrenga.com Torrenga Engineering, Inc. 907 Ridge Road Munster, Indiana 46321-1771 219.836.8918x325 Voice 219.836.1138 Facsimile www.torrenga.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
You can do a SIP debug and see what they are advertising as available codecs...and that should prove that they are not requesting the correct codec. -----Original Message----- From: Brent Torrenga [mailto:lists@torrenga.com] Sent: Tuesday, January 31, 2006 4:20 PM To: Asterisk User List Subject: [Asterisk-Users] Teliax - Codec Preference effective? Has anyone had problems getting their preffered codecs on the Teliax web interface taking effect? I have two accounts, two separate yet similarly configured * servers. On one account the settings took right away - on another server I am getting no result. In fact, no matter what I change the settings to, only the old codecs are usable (otherwise * says it can't negotiate a codec). Teliax support says it is an * bug, but I think contrary... One * box works, one doesn't... Same config... Anyone else? Sincerely, Brent A. Torrenga brent.torrenga@torrenga.com Torrenga Engineering, Inc. 907 Ridge Road Munster, Indiana 46321-1771 219.836.8918x325 Voice 219.836.1138 Facsimile www.torrenga.com
On Jan 31, 2006, at 1:19 PM, Brent Torrenga wrote:> Has anyone had problems getting their preffered codecs on the Teliax > web > interface taking effect? > > I have two accounts, two separate yet similarly configured * servers. > On one > account the settings took right away - on another server I am getting > no > result. In fact, no matter what I change the settings to, only the old > codecs are usable (otherwise * says it can't negotiate a codec). Teliax > support says it is an * bug, but I think contrary... One * box works, > one > doesn't... Same config... Anyone else? >the configuration web page is kind of confusing. It actually stores two different sets of settings, one for IAX and one for SIP. So, if you haven't realized this "feature", that could explain your issue. Marty
Brent Torrenga
2006-Feb-01 07:28 UTC
[Asterisk-Users] RE: Teliax - Codec Preference effective?
Thanks for your input, everyone, but I still think it is on Teliax's end...
I will present our collective thoughts to their tech.
Kevin,
I am using IAX. When I turn on IAX debug, I get:
------SNIP CLI OUTPUT------
-- Executing Dial("SIP/Brent_ring-bcf7",
"IAX2/teliax/18005558355") in
new
stack
-- Called teliax/18005558355
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00007ms SCall: 16384 DCall: 00000 [208.139.204.228:4569]
VERSION : 2
CALLED NUMBER : 18005558355
CODEC_PREFS : (g726)
CALLING NUMBER : 2198368918
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : Torrenga Engineering
LANGUAGE : en
USERNAME : (REDACTED-BY-THE-EDITOR)
FORMAT : 16
CAPABILITY : 63504
ADSICPE : 2
DATE TIME : 2006-02-01 08:20:42
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
AUTHREQ
Timestamp: 00002ms SCall: 00237 DCall: 16384 [208.139.204.228:4569]
AUTHMETHODS : (REDACTED-BY-THE-EDITOR)
CHALLENGE : (REDACTED-BY-THE-EDITOR)
USERNAME : (REDACTED-BY-THE-EDITOR)
Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass:
AUTHREP
Timestamp: 00255ms SCall: 16384 DCall: 00237 [208.139.204.228:4569]
MD5 RESULT : (REDACTED-BY-THE-EDITOR)
Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass:
REJECT
Timestamp: 00133ms SCall: 00237 DCall: 16384 [208.139.204.228:4569]
CAUSE : Unable to negotiate codec
CAUSE CODE : 58
Feb 1 08:20:43 WARNING[4710]: chan_iax2.c:6973 socket_read: Call rejected
by
208.139.204.228: Unable to negotiate codec
Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: ACK
a Timestamp: 00133ms SCall: 16384 DCall: 00237 [208.139.204.228:4569]
-- Hungup 'IAX2/teliax-16384'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing Playback("SIP/Brent_ring-bcf7",
"all-outgoing-lines-unavailabl
e") in new stack
-- Playing 'all-outgoing-lines-unavailable' (language 'en')
== Spawn extension (internal, *83518005558355, 3) exited non-zero on
'SIP/Bren
t_ring-bcf7'
------SNIP CLI OUTPUT------
I don't see any codec negotiation stuff other than my end requesting g726...
The only "effective" codec I get is GSM, which is my old setting on
the
Teliax site.
>You can do a SIP debug and see what they are advertising as available
>codecs...and that should prove that they are not requesting the correct
>codec.
>Kevin
Marty,
Hehehe, yes, I did realize this "feature" on the web page - it is
subtle
though.
>> Has anyone had problems getting their preffered codecs on the Teliax
>> web
>> interface taking effect?
>>
>> I have two accounts, two separate yet similarly configured * servers.
>> On one
>> account the settings took right away - on another server I am getting
>> no
>> result. In fact, no matter what I change the settings to, only the old
>> codecs are usable (otherwise * says it can't negotiate a codec).
Teliax
>> support says it is an * bug, but I think contrary... One * box works,
>> one
>> doesn't... Same config... Anyone else?
>>
>the configuration web page is kind of confusing. It actually stores
>two different sets of settings, one for IAX and one for SIP.
>
>So, if you haven't realized this "feature", that could
explain your
>issue.
>
>Marty
Ross,
Yeah, good point. Once I do get this straightened out I will just enable
everything on their end and pick and choose with my * box at my end. So, I
guess the only reason I need to set it on their end is to cause me
trouble...?
>I use Teliax for 2 different businesses; 1 uses ulaw and the other uses
g729. I didn't set anything in the Teliax >control panel, I just set
everything on the Asterisk box; works great for me.>Is there a reason you're setting it @ Teliax and not in the Asterisk
box?
>(excuse this question if it's a dumb one)
>
>Ross
Sincerely,
Brent A. Torrenga
brent.torrenga@torrenga.com
Torrenga Engineering, Inc.
907 Ridge Road
Munster, Indiana 46321-1771
219.836.8918x325 Voice
219.836.1138 Facsimile
www.torrenga.com
Brent, I had this same problem with Teliax (atleast it sounds the same). I had wanted to use g729 over IAX, so I set that on the Teliax website, but it would not connect. After weeks of asking for resolution, I just gave up and used g726 which was working. Then, about a month later, I moved my * box and while taking the time to set it up again I thought I'd try g729 with Teliax again... This time it worked?!? I was glad it worked, but couldn't figure out why. I explained the situation to Teliax, and never got a response. I still use Teliax, and have no problems, but I don't give them high marks for how this situation was handled. JR PS - have you tried: disallow = all allow = g729 On 1/31/06, Brent Torrenga <lists@torrenga.com> wrote:> > Has anyone had problems getting their preffered codecs on the Teliax web > interface taking effect? > > I have two accounts, two separate yet similarly configured * servers. On > one > account the settings took right away - on another server I am getting no > result. In fact, no matter what I change the settings to, only the old > codecs are usable (otherwise * says it can't negotiate a codec). Teliax > support says it is an * bug, but I think contrary... One * box works, one > doesn't... Same config... Anyone else? > > > Sincerely, > > Brent A. Torrenga > brent.torrenga@torrenga.com > > Torrenga Engineering, Inc. > 907 Ridge Road > Munster, Indiana 46321-1771 > > 219.836.8918x325 Voice > 219.836.1138 Facsimile > www.torrenga.com > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060201/46225eae/attachment.htm
I have found that it takes a certain amount of time for the codec preferences that I enter on Teliax's website to actually take effect. The amount of time has varied from 5 minutes to several hours in my experience, although I have not changed the settings in some time. I have also found that if Teliax does not know how to or does not wish to solve a problem, they will ignore you even when you explicitly bring the fact that they are ignoring you to their attention and request a response. (My experience with this behavior did not have anything to do with the codec selection delay but rather with some billing issues that still have not been resolved.) -Rusty On 1/31/06, Brent Torrenga <lists@torrenga.com> wrote:> Has anyone had problems getting their preffered codecs on the Teliax web > interface taking effect? > > I have two accounts, two separate yet similarly configured * servers. On one > account the settings took right away - on another server I am getting no > result. In fact, no matter what I change the settings to, only the old > codecs are usable (otherwise * says it can't negotiate a codec). Teliax > support says it is an * bug, but I think contrary... One * box works, one > doesn't... Same config... Anyone else? > > > Sincerely, > > Brent A. Torrenga > brent.torrenga@torrenga.com > > Torrenga Engineering, Inc. > 907 Ridge Road > Munster, Indiana 46321-1771 > > 219.836.8918x325 Voice > 219.836.1138 Facsimile > www.torrenga.com > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Sorry to bring up this old topic, but I had the same issue. The solution, at least to my problem, was the realization the Teliax lets you set the codec settings for SIP and IAX independently and the default setting when you load the page is SIP. So if you make the changes there, but you're using an IAX trunk, it will never take effect. If you click on IAX, right above the codec selection, you will see the IAX settings. It does take between 1 and 12 hours for the new settings to take effect. Dan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of tim panton Sent: Wednesday, February 01, 2006 6:15 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] RE: Teliax - Codec Preference effective? Brent Torrenga wrote:> Thanks for your input, everyone, but I still think it is on Teliax'send...> I will present our collective thoughts to their tech. > > Kevin, > I am using IAX. When I turn on IAX debug, I get: > > ------SNIP CLI OUTPUT------ > > -- Executing Dial("SIP/Brent_ring-bcf7","IAX2/teliax/18005558355") in> new > stack > -- Called teliax/18005558355 > Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAXSubclass: NEW> Timestamp: 00007ms SCall: 16384 DCall: 00000[208.139.204.228:4569]> VERSION : 2 > CALLED NUMBER : 18005558355 > CODEC_PREFS : (g726) > CALLING NUMBER : 2198368918 > CALLING PRESNTN : 0 > CALLING TYPEOFN : 0 > CALLING TRANSIT : 0 > CALLING NAME : Torrenga Engineering > LANGUAGE : en > USERNAME : (REDACTED-BY-THE-EDITOR) > FORMAT : 16 > CAPABILITY : 63504 > ADSICPE : 2 > DATE TIME : 2006-02-01 08:20:42 > > > Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: > AUTHREQ > Timestamp: 00002ms SCall: 00237 DCall: 16384[208.139.204.228:4569]> AUTHMETHODS : (REDACTED-BY-THE-EDITOR) > CHALLENGE : (REDACTED-BY-THE-EDITOR) > USERNAME : (REDACTED-BY-THE-EDITOR) > > Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type: IAXSubclass:> AUTHREP > Timestamp: 00255ms SCall: 16384 DCall: 00237[208.139.204.228:4569]> MD5 RESULT : (REDACTED-BY-THE-EDITOR) > > > Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: > REJECT > Timestamp: 00133ms SCall: 00237 DCall: 16384[208.139.204.228:4569]> CAUSE : Unable to negotiate codec > CAUSE CODE : 58 > > Feb 1 08:20:43 WARNING[4710]: chan_iax2.c:6973 socket_read: Callrejected> by > 208.139.204.228: Unable to negotiate codec > Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002 Type: IAXSubclass: ACK> > a Timestamp: 00133ms SCall: 16384 DCall: 00237[208.139.204.228:4569]> -- Hungup 'IAX2/teliax-16384' > == Everyone is busy/congested at this time (1:0/0/1) > -- Executing Playback("SIP/Brent_ring-bcf7", > "all-outgoing-lines-unavailabl > e") in new stack > -- Playing 'all-outgoing-lines-unavailable' (language 'en') > > == Spawn extension (internal, *83518005558355, 3) exited non-zero on > 'SIP/Bren > t_ring-bcf7' > > ------SNIP CLI OUTPUT------ > > I don't see any codec negotiation stuff other than my end requestingg726...> The only "effective" codec I get is GSM, which is my old setting onthe> Teliax site. > >IAX doesn't exactly do negotiation per se. In the first packet you send you say CODEC_PREFS = g726 and FORMAT = 16 This means that you are _only_ prepared to do g726 (Thats a Six not a Nine by the way) They reject the call because they don't want to do 726 and you didn't offer anything else. Tim. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users