Hi,
When we make an outgoing call on ISDN (zaphfc) with overlap dialing we get
immidiate hangup after answer. But when we place a full number before
dialing everything is ok. Any help appriciated!! Thanks
here is info with debug:
== Primary D-Channel on span 1 up
-- Executing Dial("SIP/200-164c", "zap/g1/|100|tc") in
new stack
-- Making new call for cr 192
-- Requested transfer capability: 0x00 - SPEECH> Protocol Discriminator: Q.931 (8) len=22
> Call Ref: len= 1 (reference 64/0x40) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)> Ext: 1 User information layer 1: A-Law (35)
> [18 01 81]
> Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred
Dchan: 0> ChanSel: B1 channel
]> [6c 05 21 80 32 30 30]
> Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)> Presentation: Presentation permitted, user
number not screened (0) '200' ]> [70 01 c1]
> Called Number (len= 3) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '' ]
-- Called g1/
< Protocol Discriminator: Q.931 (8) len=11
< Call Ref: len= 1 (reference 192/0xC0) (Terminator)
< Message type: SETUP ACKNOWLEDGE (13)
< [18 01 89]
< Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Exclusive
Dchan: 0
< ChanSel: B1 channel
]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 30 (cs0, Progress Indicator)> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 64/0x40) (Originator)
> Message type: INFORMATION (123)
> [70 02 c1 39]
> Called Number (len= 4) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9'
]> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 64/0x40) (Originator)
> Message type: INFORMATION (123)
> [70 02 c1 35]
> Called Number (len= 4) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '5' ]
< Protocol Discriminator: Q.931 (8) len=4
< Call Ref: len= 1 (reference 192/0xC0) (Terminator)
< Message type: CALL PROCEEDING (2)
-- Zap/1-1 is making progress passing it to SIP/200-164c
< Protocol Discriminator: Q.931 (8) len=12
< Call Ref: len= 1 (reference 192/0xC0) (Terminator)
< Message type: ALERTING (1)
< [1e 02 84 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
< [1e 02 84 82]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Called
equipment is non-ISDN. (2) ]
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 30 (cs0, Progress Indicator)
-- Zap/1-1 is ringing, hanging up.
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate
Call Received> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 64/0x40) (Originator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
-- Hungup 'Zap/1-1'
< Protocol Discriminator: Q.931 (8) len=4
< Call Ref: len= 1 (reference 192/0xC0) (Terminator)
< Message type: RELEASE (77)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
Request> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 64/0x40) (Originator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Executing Macro("SIP/200-164c", "hangupcall") in new
stack
-- Executing ResetCDR("SIP/200-164c", "w") in new stack
-- Executing NoCDR("SIP/200-164c", "") in new stack
-- Executing Wait("SIP/200-164c", "5") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on
'SIP/200-164c' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on
'SIP/200-164c'
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051008/d058e210/attachment.htm
For your information.. if someone get in the same trouble.. problem is
solved, but not with the software.
We just changed our BRI NT device with a different one.. from now on it
works very well.
We had Elcon NT1+2a/b and now it is replaced with Santis ISDN NT1+2ab
Here is pri debug:
-- Making new call for cr 143
-- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8) len=22
> Call Ref: len= 1 (reference 15/0xF) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
> Ext: 1 User information layer 1: A-Law (35)
> [18 01 81]
> Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred
Dchan: 0
> ChanSel: B1 channel
]
> [6c 05 21 80 32 30 30]
> Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user
number not screened (0) '200' ]
> [70 01 c1]
> Called Number (len= 3) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '' ]
-- Called g1/
< Protocol Discriminator: Q.931 (8) len=11
< Call Ref: len= 1 (reference 143/0x8F) (Terminator)
< Message type: SETUP ACKNOWLEDGE (13)
< [18 01 89]
< Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Exclusive
Dchan: 0
< ChanSel: B1 channel
]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 30 (cs0, Progress Indicator)
> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 15/0xF) (Originator)
> Message type: INFORMATION (123)
> [70 02 c1 30]
> Called Number (len= 4) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '0' ]
> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 15/0xF) (Originator)
> Message type: INFORMATION (123)
> [70 02 c1 39]
.
> Called Number (len= 4) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '0' ]
< Protocol Discriminator: Q.931 (8) len=4
< Call Ref: len= 1 (reference 143/0x8F) (Terminator)
< Message type: CALL PROCEEDING (2)
-- Zap/1-1 is making progress passing it to SIP/200-7b76
< Protocol Discriminator: Q.931 (8) len=8
< Call Ref: len= 1 (reference 143/0x8F) (Terminator)
< Message type: ALERTING (1)
< [1e 02 84 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
-- Processing IE 30 (cs0, Progress Indicator)
* Zap/1-1 is ringing
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate
Call Received
> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 15/0xF) (Originator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
-- Hungup 'Zap/1-1'
Hi,
When we make an outgoing call on ISDN (zaphfc) with overlap dialing we get
immidiate hangup after answer. But when we place a full number before
dialing everything is ok. Any help appriciated!! Thanks
here is info with debug:
.
< [1e 02 84 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
< [1e 02 84 82]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Called
equipment is non-ISDN. (2) ]
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 30 (cs0, Progress Indicator)
-- Zap/1-1 is ringing, hanging up.
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate
Call Received> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 64/0x40) (Originator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051012/06864c64/attachment.htm