thr3ads.net - asterisk users - [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri

If this information is useful, please help other people find it:
Share via:

Colin Anderson

2005-Sep-28 08:57 UTC

[Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri_net'

Did you compile and install libpri *before* Asterisk? I had same problem
(among others) b/c I didn't install in the correct order. Try the awesome
asterisk_update.sh shell script.
 
Are you trying to emulate CPE or NET? Try signalling=pri_cpe
 
Check for whitespace behind the statement, zapata.conf seems bitchy about
whitespace.
 
hth
 
 -----Original Message-----
From: Steve Totaro [mailto:asterisk@totarotechnologies.com]
Sent: Wednesday, September 28, 2005 12:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown
signalling method 'pri_net'



Any ideas?
 
51] logger.c:  [chan_zap.so] => (Zapata Telephony)
Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c:  
=Parsing '/etc/asterisk/zapata.conf': Found
Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata-auto.conf': Sep 28 00:42:35 VERBOSE[5151]
logger.c:
== Parsing '/etc/asterisk/zapata-auto.conf': Not found (No such file or
directory)
Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata_additional.conf': Sep 28 00:42:35 VERBOSE[5151]
logger.c:   == Parsing '/etc/asterisk/zapata_additional.conf': Found
Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown signalling method
'pri_net'
Sep 28 00:42:35 ERROR[5151] chan_zap.c: Signalling must be specified before
any channels are.
Sep 28 00:42:35 WARNING[5151] loader.c: chan_zap.so: load_module failed,
returning -1
Sep 28 00:42:35 WARNING[5151] loader.c: Loading module chan_zap.so failed!

zaptel.conf
span=1,0,0,esf,b8zs 
bchan=1-23 
dchan=24
 
span=2,0,0,esf,b8zs 
bchan=25-47
dchan=48
 
span=3,0,0,esf,b8zs 
bchan=49-71 
dchan=72
 
span=4,0,0,esf,b8zs 
bchan=73-95 
dchan=96
 
loadzone = us
defaultzone=us

zapata.conf
;
; Zapata telephony interface
;
; Configuration file
 
[trunkgroups]
 
[channels]
 
language=en
context=from-pstn
rxwink=300  ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
 
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
echotraining=no
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
 

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
context = from-pstn
switchtype = national
signalling = pri_net
group = 0
channel => 1-23
 
switchtype = national
signalling = pri_net
group = 1
channel => 25-47
 
switchtype = national
signalling = pri_net
group = 2
channel => 49-71
 
switchtype = national
signalling = pri_net
group = 3
channel => 73-95


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050928/007ba2d1/attachment.htm

Colin Anderson

2005-Sep-28 11:56 UTC

head link

[Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri_net'

One thing I noticed with @home 1.5 is that I never got it to work with my
TDM FXS until I disabled the newer TDM drivers and used the old drivers,
then hand-wrote my zaptel and zapata.conf and didn't use the automatic
zaptel configuration script then it worked perfect. So for me, I would
'modprobe wcfxs' and for you it would be 'modprobe wct1xxp' give
it a shot.
 
zapata and zaptel.conf are super bitchy to get right, this is one case where
you want to hand-generate your conf instead of autogenerating it. 

-----Original Message-----
From: Steve Totaro [mailto:asterisk@totarotechnologies.com]
Sent: Wednesday, September 28, 2005 2:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c:
Unknown signalling method 'pri_net'


This is an *@home <mailto:*@home>  installation.  I tried both pri_net and
pri_cpe.  
 
Checking for whitespace.

----- Original Message ----- 
From: Colin Anderson <mailto:ColinA@landmarkmasterbuilder.com>  
To: 'Asterisk Users Mailing List - 
<mailto:asterisk-users@lists.digium.com>
Non-Commercial Discussion' 
Sent: Wednesday, September 28, 2005 8:57 AM
Subject: RE: [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c:
Unknown signalling method 'pri_net'

Did you compile and install libpri *before* Asterisk? I had same problem
(among others) b/c I didn't install in the correct order. Try the awesome
asterisk_update.sh shell script.
 
Are you trying to emulate CPE or NET? Try signalling=pri_cpe
 
Check for whitespace behind the statement, zapata.conf seems bitchy about
whitespace.
 
hth
 
 -----Original Message-----
From: Steve Totaro [mailto:asterisk@totarotechnologies.com]
Sent: Wednesday, September 28, 2005 12:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown
signalling method 'pri_net'



Any ideas?
 
51] logger.c:  [chan_zap.so] => (Zapata Telephony)
Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c:  
=Parsing '/etc/asterisk/zapata.conf': Found
Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata-auto.conf': Sep 28 00:42:35 VERBOSE[5151]
logger.c:
== Parsing '/etc/asterisk/zapata-auto.conf': Not found (No such file or
directory)
Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata_additional.conf': Sep 28 00:42:35 VERBOSE[5151]
logger.c:   == Parsing '/etc/asterisk/zapata_additional.conf': Found
Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown signalling method
'pri_net'
Sep 28 00:42:35 ERROR[5151] chan_zap.c: Signalling must be specified before
any channels are.
Sep 28 00:42:35 WARNING[5151] loader.c: chan_zap.so: load_module failed,
returning -1
Sep 28 00:42:35 WARNING[5151] loader.c: Loading module chan_zap.so failed!

zaptel.conf
span=1,0,0,esf,b8zs 
bchan=1-23 
dchan=24
 
span=2,0,0,esf,b8zs 
bchan=25-47
dchan=48
 
span=3,0,0,esf,b8zs 
bchan=49-71 
dchan=72
 
span=4,0,0,esf,b8zs 
bchan=73-95 
dchan=96
 
loadzone = us
defaultzone=us

zapata.conf
;
; Zapata telephony interface
;
; Configuration file
 
[trunkgroups]
 
[channels]
 
language=en
context=from-pstn
rxwink=300  ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
 
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
echotraining=no
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
 

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
context = from-pstn
switchtype = national
signalling = pri_net
group = 0
channel => 1-23
 
switchtype = national
signalling = pri_net
group = 1
channel => 25-47
 
switchtype = national
signalling = pri_net
group = 2
channel => 49-71
 
switchtype = national
signalling = pri_net
group = 3
channel => 73-95




  _____  




_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users 



  _____  




No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050928/90d34762/attachment.htm

Steve Totaro

2005-Sep-28 13:39 UTC

head link

[Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown signalling method 'pri_net'

This is an *@home installation.  I tried both pri_net and pri_cpe.  

Checking for whitespace.
  ----- Original Message ----- 
  From: Colin Anderson 
  To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 
  Sent: Wednesday, September 28, 2005 8:57 AM
  Subject: RE: [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown
signalling method 'pri_net'


  Did you compile and install libpri *before* Asterisk? I had same problem
(among others) b/c I didn't install in the correct order. Try the awesome
asterisk_update.sh shell script.

  Are you trying to emulate CPE or NET? Try signalling=pri_cpe

  Check for whitespace behind the statement, zapata.conf seems bitchy about
whitespace.

  hth

   -----Original Message-----
  From: Steve Totaro [mailto:asterisk@totarotechnologies.com]
  Sent: Wednesday, September 28, 2005 12:39 PM
  To: Asterisk Users Mailing List - Non-Commercial Discussion
  Subject: [Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown
signalling method 'pri_net'


    Any ideas?

    51] logger.c:  [chan_zap.so] => (Zapata Telephony)
    Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c:  
== Parsing '/etc/asterisk/zapata.conf': Found
    Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata-auto.conf': Sep 28 00:42:35 VERBOSE[5151]
logger.c:   == Parsing '/etc/asterisk/zapata-auto.conf': Not found (No
such file or directory)
    Sep 28 00:42:35 VERBOSE[5151] logger.c:   == Parsing
'/etc/asterisk/zapata_additional.conf': Sep 28 00:42:35 VERBOSE[5151]
logger.c:   == Parsing '/etc/asterisk/zapata_additional.conf': Found
    Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown signalling method
'pri_net'
    Sep 28 00:42:35 ERROR[5151] chan_zap.c: Signalling must be specified before
any channels are.
    Sep 28 00:42:35 WARNING[5151] loader.c: chan_zap.so: load_module failed,
returning -1
    Sep 28 00:42:35 WARNING[5151] loader.c: Loading module chan_zap.so failed!

    zaptel.conf
    span=1,0,0,esf,b8zs 
    bchan=1-23 
    dchan=24

    span=2,0,0,esf,b8zs 
    bchan=25-47
    dchan=48

    span=3,0,0,esf,b8zs 
    bchan=49-71 
    dchan=72

    span=4,0,0,esf,b8zs 
    bchan=73-95 
    dchan=96

    loadzone = us
    defaultzone=us

    zapata.conf
    ;
    ; Zapata telephony interface
    ;
    ; Configuration file

    [trunkgroups]

    [channels]

    language=en
    context=from-pstn
    rxwink=300  ; Atlas seems to use long (250ms) winks
    ;
    ; Whether or not to do distinctive ring detection on FXO lines
    ;
    ;usedistinctiveringdetection=yes

    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    cancallforward=yes
    callreturn=yes
    echocancel=no
    echocancelwhenbridged=no
    echotraining=no
    rxgain=0.0
    txgain=0.0
    group=0
    callgroup=1
    pickupgroup=1
    immediate=no


    ;faxdetect=both
    faxdetect=incoming
    ;faxdetect=outgoing
    ;faxdetect=no
    context = from-pstn
    switchtype = national
    signalling = pri_net
    group = 0
    channel => 1-23

    switchtype = national
    signalling = pri_net
    group = 1
    channel => 25-47

    switchtype = national
    signalling = pri_net
    group = 2
    channel => 49-71

    switchtype = national
    signalling = pri_net
    group = 3
    channel => 73-95



------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation sponsored by Easynews.com --

  Asterisk-Users mailing list
  Asterisk-Users@lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Anti-Virus.
  Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050928/fe100055/attachment.htm

Maybe Matching Threads

Search for more reasonably related threads

asterisk users - Sep 2005 - Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri_net'

[Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri_net'

[Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri_net'

[Asterisk-Users] Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unknown signalling method 'pri_net'

Maybe Matching Threads