For the benefit of everyone, having H323 Configuration problem due to
H245 Tunnel, check the h323 Config embeded at the end. Comment the
offending line as under:
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=yes
;
-----Original Message-----
From: Tola Ogunsan [mailto:tolaniye@hotmail.com]
Sent: Wednesday, May 25, 2005 1:03 PM
To: Kanuri, Seshu (Company IT)
Subject: RE: oh323 problems
Thanks a million Seshu, it worked like a champ. Thanks
>From: "Kanuri, Seshu (Company IT)"
<Seshu.Kanuri@morganstanley.com>
>To: "Tola Ogunsan" <tolaniye@hotmail.com>
>Subject: RE: oh323 problems
>Date: Tue, 24 May 2005 10:11:16 -0400
>
>To start with:
>
>1)Disable H245 tunneling.
>2)Dial(Zap/g2/${EXTEN}) - change this to Dial(Zap/g2/${EXTEN}, 30)
>
>Try this and see how that changes
>
>Seshu
>
>-----Original Message-----
>
extensions.conf
[OH323]
exten => _4420X.,1,Answer
exten => _4420X.,2,Wait(2)
exten => _4420X.,3,Dial(Zap/g2/${EXTEN})
exten => _4420X.,4,Congestion
xten => _4420X.,5,Hangup>--------------------------------------------------------
>----------------------------------------------
>H323.conf
>----------------------------------------------
;
;-----------------------------------------
; General configuration options
; (ports, jitter, GK, ...)
;-----------------------------------------
[general]
;
; Address to bind to for incoming connections.
; Default is ALL.
;
listenAddress=0.0.0.0
;
; Port to listen to.
; Default value is 1720.
;
listenPort=1720
;
; Port to connect to.
; (Used only when we don't have a gatekeeper)
; Default value is 1720.
;
connectPort=1720
;
; Configure TCP port range to be used by H.323
;
tcpStart=10000
tcpEnd=30000
;tcpEnd=65000
;
; Configure UDP port range to be used by H.323
; Note: The port range used by RTP are configured from
; "rtp.conf"
;
udpStart=10000
udpEnd=30000
;udpEnd=65000
;
; Enable fast start (yes,no).
;
;fastStart=no
fastStart=no
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=yes
;
; Enable early H.245 messages in call SETUP message.
h245inSetup=yes
;
; Enable in-band-DTMF detection.
; (Note: Netmeeting uses in-band DTMFs)
;
inBandDTMF=no
;
; Enable silence suppression.
;
silenceSuppression=no
;
; Set jitter buffer (in milliseconds, 20...10000).
;
jitterMin=20
;jitterMax=500
jitterMax=1000
; Set IP Type-of-Service byte for RTP channels.
; Valid values for this option are:
; lowdelay, throughput, reliability, mincost, none
;
;ipTos=reliability
ipTos=reliability
; Set the maximum number of inbound/outbound/simultaneous
; H.323 connections.
;
outboundMax=10
inboundMax=10
simultaneousMax=10
;
; Set the bandwidth limit for H.323 connections.
; The value is in Kbps.
;
;bandwidthLimit=1024
;
; Set tracing options for the wrapper library and for the
; OpenH323 library.
; libTraceFile can be 'stdout' or a full path name to the tracefile.
; Only trace info for OpenH323 is logged in libTraceFile.
;
;wrapLibTraceLevel=1
;libTraceLevel=2
wrapLibTraceLevel=5
libTraceLevel=5
;libTraceFile=stdout
libTraceFile=/var/log/asterisk/chan_oh323.log
; Disable gatekeeper or specify a gatekeeper.
; Valid values for this option are:
; DISABLE,
; DISCOVER,
; <gatekeeper's DNS name>,
; <gatekeeper's ip>,
; GKID:<gatekeeper's id>
;
;gatekeeper=192.168.1.2
;gatekeeper=DISCOVER
;gatekeeper=209.3.12.49
gatekeeper=DISABLE
;
; Set the gatekeeper password
;
;gatekeeperPassword=secret
;
; Set the gatekeeper registration timeout
;
;gatekeeperTTL=600
;
; Set the mode for sending user-input
; Valid values for this option are:
; Q931 - Q.931 Keypad Information Element
; STRING - H.245 string
; TONE - H.245 tone
; RFC2833 - RFC2833
;
;userInputMode=TONE
userInputMode=TONE
; AMA flags (default, omit, billing, documentation)
;
amaFlags=billing
;
; Account code
;
;accountCode=H323
accountcode=H323
;
; Set the default context of H.323 calls.
;
;context=voip-h323
;context=2003 234 80
context=OH323
;-----------------------------------------
; Configure H.323 aliases, prefixes and
; related ASTERISK's contexts
;-----------------------------------------
[register]
;
; Aliases/prefixes associated with the default context
; defined in section [general].
;
;alias=asterisk
;context=23480T
;alias=68.50.129.5
;
; Aliases/prefixes routed in "all-aliases" context.
;
;context=all-aliases
;alias=ASTERISK
;alias=666
;
; Aliases/prefixes routed in "more-aliases" context.
;
;context=more-aliases
;alias=665
;
; Aliases/prefixes routed in "all-prefixes" context.
;
;context=all-prefixes
;gwprefix=00
;gwprefix=01
;
; Aliases/prefixes routed in "more-stuff" context.
;
;context=more-stuff
;alias=664
;gwprefix=02
;context=newwave
;alias=216.206.188.200
;alias=newwave
;context=IPCBgw1
;alias=195.239.25.20
;context=IPCBgw2
;alias=195.239.25.21
;context=IPCBnetSoftSwitch
;alias=216.206.188.200
;Navao - Sola Omidiran
;context=80066
alias=213.255.198.113
;-----------------------------------------
; Specify and configure CODEC related
; options
;-----------------------------------------
[codecs]
;
; Define the codec list of the channel driver.
; Every "codec" option may have a "frames" option
; associated with it.
; Valid values for the "codec" option are:
; G711U - G.711 u-Law
; G711A - G.711 A-Law
; G7231 - G.723.1(6.3k)
; G72316K3 - G.723.1(6.3k)
; G72315K3 - G.723.1(5.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G726 - G.726(32k)
; G72616K - G.726(16k)
; G72624K - G.726(24k)
; G72632K - G.726(32k)
; G72640K - G.726(40k)
; G728 - G.728
; G729 - G.729
; G729A - G.729A
; G729B - G.729B
; G729AB - G.729AB
; GSM0610 - GSM 0610
; MSGSM - Microsoft GSM Audio Capability
; LPC10 - LPC-10
; Number of frames in RTP packet (if not specified) is 1.
;
;codec=G711A
;frames=20
;codec=G711U
;frames=20
;codec=GSM0610
;frames=4
;codec=G7231
;frames=2
codec=G729A
frames=20
codec=G729
frames=40
;frames=2
;codec=G711A
;frames=20
;codec=G711U
;frames=20
--------------------------------------------------------
NOTICE: If received in error, please destroy and notify sender. Sender does not
waive confidentiality or privilege, and use is prohibited.
