asterisk users - May 2005 - T1 Card ------ Adtran ------- FXS BUG???

Good Day list, 

	I have googled and wiki'd myself to no avail.

	Here is my setup.


Asterisk Box  Digium T1 card connected to an adtran Total Access 624.

I need to pass ANI and DNIS information from asterisk to the analog
devices hanging off the adtran.

The digits are announced to the fxs devices between ring 1 and ring 2
(If I pick up the anlog phone after ring 1,  I can hear them so I feel
good about this stage).

Problem is that my analog device "once it is finished with the call"
needs to be able to "FLASHHOOK"<exten> to transfer the call to a
SIP
Handset.

Problem is that as soon as the FLASH (which is 700milli-seconds) is
heard (and I can hear this by BARGING into the channel and listening)
asterisk hangs up.

I have tried all combinations of busydetect ( and and off) as well as
every combination of busycount from 1 to 10. No help
I have pulled out all my hair at this point.

Weird thing is that if I change signaling to fxX_ks I am able to perform
the transfer np, however I loose the ANI and DNIS (feature group d)
between ring 1 and ring 2.

ANY help would be appreciated.

I think it may be a bug, but not sure.

Ronald.

PS> I am happy to pay for services rendered provided a solution can be
had.

 
/etc/zaptel.conf
span=1,1,0,esf,b8zs
e&m=1-24
defaultzone=us
loadzone=us

/etc/asterisk/Zapata.conf
language=en
context=from-pstn
faxdetect=none
usecallerid=yes
signalling=featd ; FXS for ringing phones
echocancel=yes ; You can set this to 32, 64, or 128, tweak to your
needs.
echocancelwhenbridged=yes
echotraining=400 ; Asterisk trains to the beginning of the call, number
is in milliseconds
callerid=asreceived
group=1
threewaycalling=yes
transfer=yes
rxwink=300
rxflash=700
busydetect=yes
busycount=10
context=from-internal ; Points to the default context of your
extensions.conf

channel => 1-24


ztcfg -vv

Zaptel Configuration
=====================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: E & M (Default) (Slaves: 01)
Channel 02: E & M (Default) (Slaves: 02)
Channel 03: E & M (Default) (Slaves: 03)
Channel 04: E & M (Default) (Slaves: 04)
Channel 05: E & M (Default) (Slaves: 05)
Channel 06: E & M (Default) (Slaves: 06)
Channel 07: E & M (Default) (Slaves: 07)
Channel 08: E & M (Default) (Slaves: 08)
Channel 09: E & M (Default) (Slaves: 09)
Channel 10: E & M (Default) (Slaves: 10)
Channel 11: E & M (Default) (Slaves: 11)
Channel 12: E & M (Default) (Slaves: 12)
Channel 13: E & M (Default) (Slaves: 13)
Channel 14: E & M (Default) (Slaves: 14)
Channel 15: E & M (Default) (Slaves: 15)
Channel 16: E & M (Default) (Slaves: 16)
Channel 17: E & M (Default) (Slaves: 17)
Channel 18: E & M (Default) (Slaves: 18)
Channel 19: E & M (Default) (Slaves: 19)
Channel 20: E & M (Default) (Slaves: 20)
Channel 21: E & M (Default) (Slaves: 21)
Channel 22: E & M (Default) (Slaves: 22)
Channel 23: E & M (Default) (Slaves: 23)
Channel 24: E & M (Default) (Slaves: 24)

24 channels configured.




	

Ronald Hartmann
Director Technical Services
VerCom Systems, Inc.
410 Fame Rd, Dayton, OH 45449 
Voice:"866.VerCom.4" Fax: "866.422.6486"