thr3ads.net - asterisk users - [Asterisk-Users] Conecting to asterisk server through NAT usingIAX [Feb 2005]

If this information is useful, please help other people find it:
Share via:

Liaan vd Merwe

2005-Feb-21 03:47 UTC

[Asterisk-Users] Conecting to asterisk server through NAT usingIAX

Hallo
Did you allow udp outgoing on 4569 as well.. i found
udp bit different than 
tcp when comming to firewalls
liaan

----- Original Message ----- 
From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws>
To: <timebandit001@gmail.com>; "Asterisk Users Mailing
List - Non-Commercial 
Discussion" <asterisk-users@lists.digium.com>
Sent: Monday, February 21, 2005 12:29 PM
Subject: Re: [Asterisk-Users] Conecting to asterisk
server through NAT 
usingIAX

>I did change the port 4569.
> Also my router forwards those packets.
>
> If I start tcpdump port 4569 on my server I receive:
>
> 04:25:36.061292 IP 192.168.1.253.4569 >
beu164.neoplus.adsl.tpnet.pl.4569:> UDP, length 24
> 04:25:39.154871 IP beu164.neoplus.adsl.tpnet.pl.4569
> 192.168.1.251.4569:
> UDP, length 24
> 04:25:39.155919 IP 192.168.1.253.4569 >
beu164.neoplus.adsl.tpnet.pl.4569:> UDP, length 12
> 04:25:44.063009 IP 192.168.1.253.4569 >
beu164.neoplus.adsl.tpnet.pl.4569:> UDP, length 12
> 04:25:46.063463 IP 192.168.1.253.4569 >
beu164.neoplus.adsl.tpnet.pl.4569:> UDP, length 24
> 04:25:46.063952 IP 192.168.1.253.4569 >
beu164.neoplus.adsl.tpnet.pl.4569:> UDP, length 12
> 04:25:49.119019 IP beu164.neoplus.adsl.tpnet.pl.4569
> 192.168.1.251.4569:
> UDP, length 24
> 04:25:49.120272 IP 192.168.1.253.4569 >
beu164.neoplus.adsl.tpnet.pl.4569:> UDP, length 12
>
> It means that client is trying to comunicate with
asterisk server.> But the client says that the server could not be
contacted.>
> On asterisk console with iax2 debuging enabled I
receive>
> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00007ms  SCall: 00001  DCall: 00000
[66.234.228.170:4569]>   USERNAME        : nWv96gaD75
>   REFRESH         : 60
>
> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass:> REGAUTH
>   Timestamp: 00012ms  SCall: 00055  DCall: 00001
[66.234.228.170:4569]>   AUTHMETHODS     : 3
>   CHALLENGE       : 164462354
>   USERNAME        : nWv96gaD75
>
> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00049ms  SCall: 00001  DCall: 00055
[66.234.228.170:4569]>   USERNAME        : nWv96gaD75
>   REFRESH         : 60
>   MD5 RESULT      : 478939afef8fa0ec5b480cc939dedf6f
>
> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type:
IAX     Subclass: > REGACK
>   Timestamp: 00047ms  SCall: 00055  DCall: 00001
[66.234.228.170:4569]>   USERNAME        : nWv96gaD75
>   DATE TIME       : 173363009
>   REFRESH         : 60
>   APPARENT ADDRES : IPV4 69.208.170.240:4569
>
> Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002 Type:
IAX     Subclass: ACK>   Timestamp: 00047ms  SCall: 00001  DCall: 00055
[66.234.228.170:4569]> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
[83.28.32.164:4569]>   USERNAME        : tester
>   REFRESH         : 300
>
> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass:> REGAUTH
>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]>   AUTHMETHODS     : 1
>   USERNAME        : tester
>
> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
[83.28.32.164:4569]>   USERNAME        : tester
>   REFRESH         : 300
>
> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass: ACK>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
[83.28.32.164:4569]>   USERNAME        : tester
>   REFRESH         : 300
>
> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass: ACK>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
[83.28.32.164:4569]>   USERNAME        : tester
>   REFRESH         : 300
>
> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass: ACK>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass:> REGAUTH
>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]>   AUTHMETHODS     : 1
>   USERNAME        : tester
>
> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
[83.28.32.164:4569]>   USERNAME        : tester
>   REFRESH         : 300
>
> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass: ACK>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type:
IAX     Subclass: > LAGRQ
>   Timestamp: 10022ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass:> REGAUTH
>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]>   AUTHMETHODS     : 1
>   USERNAME        : tester
>
> Tx-Frame Retry[001] -- OSeqno: 001 ISeqno: 001 Type:
IAX     Subclass: > LAGRQ
>   Timestamp: 10022ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
IAX     Subclass: > REGREQ
>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
[83.28.32.164:4569]>   USERNAME        : tester
>   REFRESH         : 300
>
> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
IAX     Subclass: ACK>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
[83.28.32.164:4569]> Tx-Frame Retry[000] -- OSeqno: 002 ISeqno: 001 Type:
IAX     Subclass: > PING
>   Times
>
>
> Any ideas what could be wrong.
>
> Thanks
>
>
>>> I use linksys router.
>>> Now, I am trying to connect from outside to my
asterisk server.>>> I use Diax as iax client.
>>> For some reason I cannot connect to my server from
outside.>>> On my router I forward those ports to my asterisk
server.>>> 5060-5063
>>> 10000-20000
>>> 5036
>>> 4569
>> For IAX, only port you have to forward is 4569 UDP
>>
>> Notice the UDP, not TCP
>>
>> I'm using Linksys WRT54G and it works without a
hitch.>>
>>> It works ok with broadvoice, but clinets cannot
connect to the server.>>> This is my iax.conf file
>>> [general]
>>> port=5036
>>
>> well, here's your problem, port=5036. This is not
the standard IAX>> port. comment that line or replace it with
port=4569>>
>> hth
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users@lists.digium.com
>>
http://lists.digium.com/mailman/listinfo/asterisk-users>> To UNSUBSCRIBE or update options visit:
>>   
http://lists.digium.com/mailman/listinfo/asterisk-users>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit:
>  
http://lists.digium.com/mailman/listinfo/asterisk-users> 


		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - Get yours free! 
http://my.yahoo.com

Bartosz Wegrzyn - asterisk

2005-Feb-21 03:52 UTC

head link

[Asterisk-Users] Conecting to asterisk server through NAT usingIAX

This was set on linksys wrt54.
I turned on the forwarding to asterisk server on port 4569.
I believe that by default all outgoing packets pass through.

Bart,
> Hallo
> Did you allow udp outgoing on 4569 as well.. i found
> udp bit different than
> tcp when comming to firewalls
> liaan
>
> ----- Original Message -----
> From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws>
> To: <timebandit001@gmail.com>; "Asterisk Users Mailing
> List - Non-Commercial
> Discussion" <asterisk-users@lists.digium.com>
> Sent: Monday, February 21, 2005 12:29 PM
> Subject: Re: [Asterisk-Users] Conecting to asterisk
> server through NAT
> usingIAX
>
>
>>I did change the port 4569.
>> Also my router forwards those packets.
>>
>> If I start tcpdump port 4569 on my server I receive:
>>
>> 04:25:36.061292 IP 192.168.1.253.4569 >
> beu164.neoplus.adsl.tpnet.pl.4569:
>> UDP, length 24
>> 04:25:39.154871 IP beu164.neoplus.adsl.tpnet.pl.4569
>> 192.168.1.251.4569:
>> UDP, length 24
>> 04:25:39.155919 IP 192.168.1.253.4569 >
> beu164.neoplus.adsl.tpnet.pl.4569:
>> UDP, length 12
>> 04:25:44.063009 IP 192.168.1.253.4569 >
> beu164.neoplus.adsl.tpnet.pl.4569:
>> UDP, length 12
>> 04:25:46.063463 IP 192.168.1.253.4569 >
> beu164.neoplus.adsl.tpnet.pl.4569:
>> UDP, length 24
>> 04:25:46.063952 IP 192.168.1.253.4569 >
> beu164.neoplus.adsl.tpnet.pl.4569:
>> UDP, length 12
>> 04:25:49.119019 IP beu164.neoplus.adsl.tpnet.pl.4569
>> 192.168.1.251.4569:
>> UDP, length 24
>> 04:25:49.120272 IP 192.168.1.253.4569 >
> beu164.neoplus.adsl.tpnet.pl.4569:
>> UDP, length 12
>>
>> It means that client is trying to comunicate with
> asterisk server.
>> But the client says that the server could not be
> contacted.
>>
>> On asterisk console with iax2 debuging enabled I
> receive
>>
>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00007ms  SCall: 00001  DCall: 00000
> [66.234.228.170:4569]
>>   USERNAME        : nWv96gaD75
>>   REFRESH         : 60
>>
>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass:
>> REGAUTH
>>   Timestamp: 00012ms  SCall: 00055  DCall: 00001
> [66.234.228.170:4569]
>>   AUTHMETHODS     : 3
>>   CHALLENGE       : 164462354
>>   USERNAME        : nWv96gaD75
>>
>> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00049ms  SCall: 00001  DCall: 00055
> [66.234.228.170:4569]
>>   USERNAME        : nWv96gaD75
>>   REFRESH         : 60
>>   MD5 RESULT      : 478939afef8fa0ec5b480cc939dedf6f
>>
>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type:
> IAX     Subclass:
>> REGACK
>>   Timestamp: 00047ms  SCall: 00055  DCall: 00001
> [66.234.228.170:4569]
>>   USERNAME        : nWv96gaD75
>>   DATE TIME       : 173363009
>>   REFRESH         : 60
>>   APPARENT ADDRES : IPV4 69.208.170.240:4569
>>
>> Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002 Type:
> IAX     Subclass: ACK
>>   Timestamp: 00047ms  SCall: 00001  DCall: 00055
> [66.234.228.170:4569]
>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
> [83.28.32.164:4569]
>>   USERNAME        : tester
>>   REFRESH         : 300
>>
>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass:
>> REGAUTH
>>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>>   AUTHMETHODS     : 1
>>   USERNAME        : tester
>>
>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
> [83.28.32.164:4569]
>>   USERNAME        : tester
>>   REFRESH         : 300
>>
>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass: ACK
>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
> [83.28.32.164:4569]
>>   USERNAME        : tester
>>   REFRESH         : 300
>>
>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass: ACK
>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
> [83.28.32.164:4569]
>>   USERNAME        : tester
>>   REFRESH         : 300
>>
>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass: ACK
>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass:
>> REGAUTH
>>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>>   AUTHMETHODS     : 1
>>   USERNAME        : tester
>>
>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
> [83.28.32.164:4569]
>>   USERNAME        : tester
>>   REFRESH         : 300
>>
>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass: ACK
>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type:
> IAX     Subclass:
>> LAGRQ
>>   Timestamp: 10022ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass:
>> REGAUTH
>>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>>   AUTHMETHODS     : 1
>>   USERNAME        : tester
>>
>> Tx-Frame Retry[001] -- OSeqno: 001 ISeqno: 001 Type:
> IAX     Subclass:
>> LAGRQ
>>   Timestamp: 10022ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type:
> IAX     Subclass:
>> REGREQ
>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
> [83.28.32.164:4569]
>>   USERNAME        : tester
>>   REFRESH         : 300
>>
>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type:
> IAX     Subclass: ACK
>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
> [83.28.32.164:4569]
>> Tx-Frame Retry[000] -- OSeqno: 002 ISeqno: 001 Type:
> IAX     Subclass:
>> PING
>>   Times
>>
>>
>> Any ideas what could be wrong.
>>
>> Thanks
>>
>>
>>>> I use linksys router.
>>>> Now, I am trying to connect from outside to my
> asterisk server.
>>>> I use Diax as iax client.
>>>> For some reason I cannot connect to my server from
> outside.
>>>> On my router I forward those ports to my asterisk
> server.
>>>> 5060-5063
>>>> 10000-20000
>>>> 5036
>>>> 4569
>>> For IAX, only port you have to forward is 4569 UDP
>>>
>>> Notice the UDP, not TCP
>>>
>>> I'm using Linksys WRT54G and it works without a
> hitch.
>>>
>>>> It works ok with broadvoice, but clinets cannot
> connect to the server.
>>>> This is my iax.conf file
>>>> [general]
>>>> port=5036
>>>
>>> well, here's your problem, port=5036. This is not
> the standard IAX
>>> port. comment that line or replace it with
> port=4569
>>>
>>> hth
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users@lists.digium.com
>>>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users@lists.digium.com
>>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> The all-new My Yahoo! - Get yours free!
> http://my.yahoo.com
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Liaan vd Merwe

2005-Feb-21 04:09 UTC

head link

[Asterisk-Users] Conecting to asterisk server through NAT usingIAX

well, it seems like the 2 are communicating
correctley.. just went through 
all the logs
what is the error that you recieve?

----- Original Message ----- 
From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws>
To: "Asterisk Users Mailing List - Non-Commercial
Discussion" 
<asterisk-users@lists.digium.com>
Sent: Monday, February 21, 2005 12:52 PM
Subject: Re: [Asterisk-Users] Conecting to asterisk
server through NAT 
usingIAX

> This was set on linksys wrt54.
> I turned on the forwarding to asterisk server on
port 4569.> I believe that by default all outgoing packets pass
through.>
> Bart,
>
>> Hallo
>> Did you allow udp outgoing on 4569 as well.. i
found>> udp bit different than
>> tcp when comming to firewalls
>> liaan
>>
>> ----- Original Message -----
>> From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws>
>> To: <timebandit001@gmail.com>; "Asterisk Users
Mailing>> List - Non-Commercial
>> Discussion" <asterisk-users@lists.digium.com>
>> Sent: Monday, February 21, 2005 12:29 PM
>> Subject: Re: [Asterisk-Users] Conecting to asterisk
>> server through NAT
>> usingIAX
>>
>>
>>>I did change the port 4569.
>>> Also my router forwards those packets.
>>>
>>> If I start tcpdump port 4569 on my server I
receive:>>>
>>> 04:25:36.061292 IP 192.168.1.253.4569 >
>> beu164.neoplus.adsl.tpnet.pl.4569:
>>> UDP, length 24
>>> 04:25:39.154871 IP
beu164.neoplus.adsl.tpnet.pl.4569>>> 192.168.1.251.4569:
>>> UDP, length 24
>>> 04:25:39.155919 IP 192.168.1.253.4569 >
>> beu164.neoplus.adsl.tpnet.pl.4569:
>>> UDP, length 12
>>> 04:25:44.063009 IP 192.168.1.253.4569 >
>> beu164.neoplus.adsl.tpnet.pl.4569:
>>> UDP, length 12
>>> 04:25:46.063463 IP 192.168.1.253.4569 >
>> beu164.neoplus.adsl.tpnet.pl.4569:
>>> UDP, length 24
>>> 04:25:46.063952 IP 192.168.1.253.4569 >
>> beu164.neoplus.adsl.tpnet.pl.4569:
>>> UDP, length 12
>>> 04:25:49.119019 IP
beu164.neoplus.adsl.tpnet.pl.4569>>> 192.168.1.251.4569:
>>> UDP, length 24
>>> 04:25:49.120272 IP 192.168.1.253.4569 >
>> beu164.neoplus.adsl.tpnet.pl.4569:
>>> UDP, length 12
>>>
>>> It means that client is trying to comunicate with
>> asterisk server.
>>> But the client says that the server could not be
>> contacted.
>>>
>>> On asterisk console with iax2 debuging enabled I
>> receive
>>>
>>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00007ms  SCall: 00001  DCall: 00000
>> [66.234.228.170:4569]
>>>   USERNAME        : nWv96gaD75
>>>   REFRESH         : 60
>>>
>>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass:
>>> REGAUTH
>>>   Timestamp: 00012ms  SCall: 00055  DCall: 00001
>> [66.234.228.170:4569]
>>>   AUTHMETHODS     : 3
>>>   CHALLENGE       : 164462354
>>>   USERNAME        : nWv96gaD75
>>>
>>> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00049ms  SCall: 00001  DCall: 00055
>> [66.234.228.170:4569]
>>>   USERNAME        : nWv96gaD75
>>>   REFRESH         : 60
>>>   MD5 RESULT      :
478939afef8fa0ec5b480cc939dedf6f>>>
>>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002
Type:>> IAX     Subclass:
>>> REGACK
>>>   Timestamp: 00047ms  SCall: 00055  DCall: 00001
>> [66.234.228.170:4569]
>>>   USERNAME        : nWv96gaD75
>>>   DATE TIME       : 173363009
>>>   REFRESH         : 60
>>>   APPARENT ADDRES : IPV4 69.208.170.240:4569
>>>
>>> Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002
Type:>> IAX     Subclass: ACK
>>>   Timestamp: 00047ms  SCall: 00001  DCall: 00055
>> [66.234.228.170:4569]
>>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
>> [83.28.32.164:4569]
>>>   USERNAME        : tester
>>>   REFRESH         : 300
>>>
>>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass:
>>> REGAUTH
>>>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>>   AUTHMETHODS     : 1
>>>   USERNAME        : tester
>>>
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
>> [83.28.32.164:4569]
>>>   USERNAME        : tester
>>>   REFRESH         : 300
>>>
>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass: ACK
>>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
>> [83.28.32.164:4569]
>>>   USERNAME        : tester
>>>   REFRESH         : 300
>>>
>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass: ACK
>>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
>> [83.28.32.164:4569]
>>>   USERNAME        : tester
>>>   REFRESH         : 300
>>>
>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass: ACK
>>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass:
>>> REGAUTH
>>>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>>   AUTHMETHODS     : 1
>>>   USERNAME        : tester
>>>
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
>> [83.28.32.164:4569]
>>>   USERNAME        : tester
>>>   REFRESH         : 300
>>>
>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass: ACK
>>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001
Type:>> IAX     Subclass:
>>> LAGRQ
>>>   Timestamp: 10022ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass:
>>> REGAUTH
>>>   Timestamp: 00019ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>>   AUTHMETHODS     : 1
>>>   USERNAME        : tester
>>>
>>> Tx-Frame Retry[001] -- OSeqno: 001 ISeqno: 001
Type:>> IAX     Subclass:
>>> LAGRQ
>>>   Timestamp: 10022ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
Type:>> IAX     Subclass:
>>> REGREQ
>>>   Timestamp: 00003ms  SCall: 13354  DCall: 00000
>> [83.28.32.164:4569]
>>>   USERNAME        : tester
>>>   REFRESH         : 300
>>>
>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
Type:>> IAX     Subclass: ACK
>>>   Timestamp: 00003ms  SCall: 00002  DCall: 13354
>> [83.28.32.164:4569]
>>> Tx-Frame Retry[000] -- OSeqno: 002 ISeqno: 001
Type:>> IAX     Subclass:
>>> PING
>>>   Times
>>>
>>>
>>> Any ideas what could be wrong.
>>>
>>> Thanks
>>>
>>>
>>>>> I use linksys router.
>>>>> Now, I am trying to connect from outside to my
>> asterisk server.
>>>>> I use Diax as iax client.
>>>>> For some reason I cannot connect to my server
from>> outside.
>>>>> On my router I forward those ports to my
asterisk>> server.
>>>>> 5060-5063
>>>>> 10000-20000
>>>>> 5036
>>>>> 4569
>>>> For IAX, only port you have to forward is 4569
UDP>>>>
>>>> Notice the UDP, not TCP
>>>>
>>>> I'm using Linksys WRT54G and it works without a
>> hitch.
>>>>
>>>>> It works ok with broadvoice, but clinets cannot
>> connect to the server.
>>>>> This is my iax.conf file
>>>>> [general]
>>>>> port=5036
>>>>
>>>> well, here's your problem, port=5036. This is not
>> the standard IAX
>>>> port. comment that line or replace it with
>> port=4569
>>>>
>>>> hth
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users@lists.digium.com
>>>>
>>
http://lists.digium.com/mailman/listinfo/asterisk-users>>>> To UNSUBSCRIBE or update options visit:
>>>>
>>
http://lists.digium.com/mailman/listinfo/asterisk-users>>>>
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users@lists.digium.com
>>>
>>
http://lists.digium.com/mailman/listinfo/asterisk-users>>> To UNSUBSCRIBE or update options visit:
>>>
>>
http://lists.digium.com/mailman/listinfo/asterisk-users>>>
>>
>>
>>
>>
>> __________________________________
>> Do you Yahoo!?
>> The all-new My Yahoo! - Get yours free!
>> http://my.yahoo.com
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users@lists.digium.com
>>
http://lists.digium.com/mailman/listinfo/asterisk-users>> To UNSUBSCRIBE or update options visit:
>>   
http://lists.digium.com/mailman/listinfo/asterisk-users>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit:
>  
http://lists.digium.com/mailman/listinfo/asterisk-users> 


		
__________________________________ 
Do you Yahoo!? 
All your favorites on one personal page – Try My Yahoo!
http://my.yahoo.com

Seemingly Similar Threads

Search for more apparently analagous threads

asterisk users - Feb 2005 - Conecting to asterisk server through NAT usingIAX

[Asterisk-Users] Conecting to asterisk server through NAT usingIAX

[Asterisk-Users] Conecting to asterisk server through NAT usingIAX

[Asterisk-Users] Conecting to asterisk server through NAT usingIAX

Seemingly Similar Threads