similar to: Conecting to asterisk server through NAT usingIAX

Is there any documentation on IAX RSA authentication because I followed http://www.voip-info.org/wiki/index.php?page=Asterisk+iax+rsa+auth and it's not working... Asterisk 1 : -r--r--r-- 1 root root 272 Aug 25 10:34 server2.pub -r-------- 1 root root 963 Aug 24 19:38 server1.key Asterisk 2 : -r-------- 1 root root 963 Aug 24 19:53 server2.key -r--r--r-- 1 root root 272 Aug 25 09:02

I'm starting to get this to work! Well I got Voice Mail to work! All calls goes to voice mail without ringing the users phone (iaxComm). Here is my iax.conf and my extensions.conf Any help would be great!! Thanks -------------- next part -------------- A non-text attachment was scrubbed... Name: extensions.conf Type: application/octet-stream Size: 1039 bytes Desc: extensions.conf Url :

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

This may not strictly be an asterisk question, but not sure where else to post ... I have an Asterisk test server setup with two firefly clients, one on the local lan and one on an external ip address. Both clients are setup the same way and voice calls work fine. The asterisk console reports a "Registered" message for the external client at about one minute intervals but the

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default] exten=>_.,1,Dial(IAX2/${EXTEN})

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default]

I received this before, and it is because you are using the wrong context in the iax.conf. For example: The context must match the username in the register statement. Iax.conf... register => username:secret@iax.host.net [username] type=friend context=iax-in user=username secret=secret auth=plaintext host=iax.hust.net ----------------------------------------------------------------

Hello Everyone, I am trying to diagnose issue with my IAX2 extension not working. When I have iax2 set debug on all I see is this: *Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ * * Timestamp: 00003ms SCall: 00130 DCall: 00000 [64.229.229.111:64823]* * USERNAME : 100* * REFRESH : 60* * * *Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type:

Hi everyone, THis is my second thread regarding the issue.(before I was having problems with accessing my email, which slow down my responses, sorry for that) My setup looks like this Firewall | | Asterisk---Asterisk (two asterisk servers with the same setup for high avail) | | phones Ports 5060, 10000-20000, 4569, 5036 are forwared to 192.168.1.251 which is virtual ip address on one of the

Dear Sanjay, Sorry sanjay i miss to explain completely. My PC2PC mean is Dialer2Dialer i want to allow call between Dialer with out any registry and authentication through IAX. so i need to setup Asterisk accept calls from any user and users can call to each other without any password and registration. please help how can i configure Asterisk using IAX in this regards. thanks, Asif Message: 9

I have been having problems getting PrivacyManager to work correctly. Right now I am running the 1/21/05 CVS but I have been unable to get this to work on asterisk-stable either. You can see from the debug below that the inbound call is arriving via IAX2 and both the CALLING NUMBER and CALLING NAME are both set as "Unavailable". However, PrivacyManager executes and determines that

I am using Teliax to terminate my calls, and I have 3 licenses' for g729 from Digium. "show translations" verifies that the registration took place. When I place a call, having "allow=g729" as the only allow option in iax.conf, I get the following error: WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by 208.139.204.228: Unable to negotiate codec If I place a

Hi; ? I would like to use a samba configuration with : ? dedicated keytab file = /etc/krb5.keytab kerberos method = system keytab security = ADS ? But when I test the configuration (testparm) I have the following error msg : ? Load smb config files from /etc/samba/smb.conf Unknown parameter encountered: "dedicated keytab file" Ignoring unknown parameter "dedicated keytab file"

Hi I've 3 iax connections to my provider , each of them have own DID , PH1<----| | \/ PH2<-->|-----| <---------------------------> |----|<-- DID1 | A1 | <---------------------------> |ISP |<-- DID2 PH3<-->|-----| <---------------------------> |----|<-- DID3 I had iax phone on each of this connection , but now I want to terminate all

What settings are people using? I've seen the ones from dslreports but I'm in that lucky group of people that paid the 1 euro just to have it no longer work. Even after I setup a additional account over the weekend it still doesn't work. And, of course, etherreal only shows encrypted traffic so I can't snag any config settings from it. Any assistance? -----Original

I'vce got three Asterisk systems here that I'd like to be able to place calls between with IAX. As usual, I've spent several hours playing with it, really getting nowhere. Asterisk is so mentally draining. Each system, pbx1, pbx2, pbx3, should be able to connect to every other. Do I need separate user/peers or can I combine them into a single user=friend for each system? if I place a

Hi, I have two asterisk servers one is connected to the PSTN and the other one is connected to SIP users. The two servers connect with each other using IAX. When I have an incoming call from PSTN to the asterisk servers and have a forward to go back out to the PSTN the two IAX channel bridge together. Now every time I dial a DTMF digit, the asterisk is sending two DTMF digits. I enable

G'Day, I have a bit of FireFly problem that hopefully someone has seen before. What happens is if I make to or receive a call from the FireFly network the call will connect successfully. However, around 10 seconds after I answer the call I am disconnected. The weird thing is same thing happens if I make a call. I've had a look at the * console and I can't see that my * PBX drops

hi, I use IAX softphone with asterisk and I notice that a call between two IAX softphones end after 1 min. Then I can't hear anything but the call still in progress. I have this log in asterisk IAX debug: Rx-Frame Retry[No] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: ACK Timestamp: 00016ms SCall: 21589 DCall: 00001 [192.168.1.22:4569] Tx-Frame Retry[000] --

Hi, I'm trying to track down why I'm getting calls dropped on an infrequent basis between two asterisk servers which are at the same physical location and connected to each other with UTP ethernet. Here is the connection diagram Asterisk Server 1 ===UTPENET== Switch ====UTPENET==== Asterisk Server 2 I see sporadic RX and TX frame retries when I enable iax2 debugging on either box.