All, Having problems terminating to a Nuvox PRI, the tech at Nuvox is saying Asterisk is transmitting in CCITT (aka ITU?) when they're expecting (and will only accept) ANSI. The question is, is there a simple way to change this or am I stuck with rewriting code? I googled and checked the mailing list and found nothing, I could be barking up the wrong tree I guess. PRI is not my forte. Thanks, Matt
Matt Schulte wrote:>All, > > Having problems terminating to a Nuvox PRI, the tech at Nuvox is >saying Asterisk is transmitting in CCITT (aka ITU?) when they're >expecting (and will only accept) ANSI. The question is, is there a >simple way to change this or am I stuck with rewriting code? I googled >and checked the mailing list and found nothing, I could be barking up >the wrong tree I guess. PRI is not my forte. > > Thanks, Matt > > >Matt, We have a working pri with newsouth (now nuvox) in Jackson,MS. It is span 2 in my configs. we are bringing in 5 voice channels, and we are also bringing 256k of netosphere (frame relay) but it is broken out before it gets to the asterisk box. Maybe something in my configs will help you. You also need to set your callerid before sending the call out. -Jeff zaptel.conf: # # Zaptel Configuration File # #fxsks=1 #fxsks=2 span=1,0,0,esf,b8zs fxsks=1-8 fxoks=9-24 span=2,1,0,esf,b8zs bchan=25-30 unused=31-47 dchan=48 zapata.conf: loadzone = uscontext=default callerid=asreceived group=0 signalling=fxs_ks language=en switchtype=national signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=no callwaitingcallerid=no threewaycalling=no transfer=no cancallforward=no callreturn=no rxgain=0.0 txgain=0.0 immediate=no musiconhold=default channel => 25-30 defaultzone=us snippet from extensions.conf: exten => _9NXXXXXX,1,StripMSD,1 exten => _NXXXXXX,2,SetCallerID(${MAINNUMBER}) exten => _NXXXXXX,3,Dial(${TRUNK}/${EXTEN}) exten => _NXXXXXX,4,Congestion
I'm using a NuVox PRI terminating on a Digium card. Have the NuVox switch tech duplicate the settings for SDN Global in Charlotte NC (Greensboro NC switch) exactly. They are using DMS500's and should have no problem doing this. Here is my /etc/zaptel.conf: # span 2 is for NuVox PRI (1-23B, 24D) span=2,1,0,esf,b8zs My /etc/asterisk/zapata.conf: [channels] use_callerid=yes callwaiting=yes restrictcid=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes ;echotraining=yes echotraining=800 relaxdtmf=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no amaflags=billing accountcode=sdnclt ; ; Default language ; language=en ; NuVox PRI context=sdnpri ; switchtype = national pridialplan = unknown signalling = pri_cpe callerid=asreceived group = 2 channel => 25-47 ; -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Matt Schulte Sent: Friday, October 01, 2004 12:57 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Nuvox PRI - CCITT (ITU??) vs. ANSI All, Having problems terminating to a Nuvox PRI, the tech at Nuvox is saying Asterisk is transmitting in CCITT (aka ITU?) when they're expecting (and will only accept) ANSI. The question is, is there a simple way to change this or am I stuck with rewriting code? I googled and checked the mailing list and found nothing, I could be barking up the wrong tree I guess. PRI is not my forte. Thanks, Matt _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Yes they put us on the DMS800 because the Sonus won't work re: ANSI/ITU. Thnx for the info though. -----Original Message----- From: Tim McKee [mailto:tim@baseworx.net] Sent: Friday, October 01, 2004 2:14 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Nuvox PRI - CCITT (ITU??) vs. ANSI I'm using a NuVox PRI terminating on a Digium card. Have the NuVox switch tech duplicate the settings for SDN Global in Charlotte NC (Greensboro NC switch) exactly. They are using DMS500's and should have no problem doing this. Here is my /etc/zaptel.conf: # span 2 is for NuVox PRI (1-23B, 24D) span=2,1,0,esf,b8zs My /etc/asterisk/zapata.conf: [channels] use_callerid=yes callwaiting=yes restrictcid=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes ;echotraining=yes echotraining=800 relaxdtmf=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no amaflags=billing accountcode=sdnclt ; ; Default language ; language=en ; NuVox PRI context=sdnpri ; switchtype = national pridialplan = unknown signalling = pri_cpe callerid=asreceived group = 2 channel => 25-47 ; -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Matt Schulte Sent: Friday, October 01, 2004 12:57 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Nuvox PRI - CCITT (ITU??) vs. ANSI All, Having problems terminating to a Nuvox PRI, the tech at Nuvox is saying Asterisk is transmitting in CCITT (aka ITU?) when they're expecting (and will only accept) ANSI. The question is, is there a simple way to change this or am I stuck with rewriting code? I googled and checked the mailing list and found nothing, I could be barking up the wrong tree I guess. PRI is not my forte. Thanks, Matt _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users