Kyle Stone
2004-Mar-15 11:53 UTC
[Asterisk-Users] Cisco Call Manager and Asterisk and fastbusy?
I got it fixed.. I was routing the calls from * to CCM out the PTSN and back into the gateway to the CCM.. It was kind freaking CCM out. :) Kyle -----Original Message----- From: Dave Packham [mailto:dave.packham@utah.edu] Sent: Monday, March 15, 2004 1:25 PM To: Dan_Austin@Phoenix.com; Kyle Stone Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fastbusy? can we get a copy of your saved configs? Dave P>>> Dan_Austin@Phoenix.com 3/15/2004 10:12:10 AM >>>I gave my test * server away, so I can no longer test it, but I do have copies of my configs. I did not make extensive changes to get it to work. I was using a slightly older oh323 release (0.5.6), but I don't know that would make a difference. I'd be glad to try an help further, but I'd need more information about your setup. Are the * server and CCM on the same subnet? What CSS is assigned to the CCM gateway? What frame size is CCM using for G711? Is * using the same? Did you make any changes to FastStart/h245 tunneling options in oh323.conf ? We can also take the discussion off list if no-one else would be interested. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Monday, March 15, 2004 7:17 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I tried that, to no avail. It does the same thing.. Places the call, and then the CCM hangsup 1.5 rings into it. . -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Friday, March 12, 2004 8:18 PM To: Kyle Stone Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? Check the codecs allowed. Cisco supports most, but in my tests I limited myself to G.711U. Another possibility, and one I seem to remember having is that the IP address of the gateway did not match the * server, and as such did not have access to the correct Calling Search Space and Media Resource Groups. Still codec choice seems the most likely. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Friday, March 12, 2004 6:40 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I got the latest oh323, and the libraries. I got everything installed and working.. somewhat. I setup netmeeting and can call IAXcomm extensions I setup. I also can place calls in the reverse. When I use either to route a call to CCM, setup as per you described.. The CCM/skinny phone will ring one and a half times and hangup. If answered before the end of the ringing I get a fast busy. Any ideas? Kyle Stone -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Monday, March 08, 2004 12:04 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk? In CCM add a Gateway. Use H.323 with H.225 as the device protocol. Next add a route pattern to identify which calls to direct to *. Lastly use chan_oh323 instead of chan_h323, as the former works with CCM and the later does not (one way audio). The setup is extremely easy and works just fine, with the correct channel that is. Dan _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users