In your SIP.conf set callwaiting = no. This will work for single registrations.
If you have multiple call appearance on you phone, then it will just ring to the
second line (e.g. Cisco 7960). If you only have a single registration, then you
should be fine.
-sb
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Olle E.
Johansson
Sent: Monday, March 15, 2004 11:01 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] extensions problem (SIP)
Jon Lawrence wrote:> Hi,
> I've got 2 x100p's installed in my system.
> Both execute the same incoming contexts as follows:
> [inboundA]
> include => dialjon
> [inboundB]
> include => dialjon|09:00-16:30|Mon-Fri|*|*
>
> [dialjon]
> exten => s,1,answer
> exten => s,2,Dial(SIP/2000,15)
> exten => s,3,Playback(noone)
> exten => s,103,Goto(onphone,s,1)
> <snip>
>
> Am I right in saying:
> if no one answers at ext 2000 then s,3 is executed.
> if ext 2000 is busy then 103 is executed.
>
> If so then sometihng is wrong. If I'm already on a call, I want 103 to
be
> executed however, this isn't happening. If a new call comes in (whilst
I'm
> talking on ext 2000) I here it ringing on my handset.
>
It depends on your SIP device. Asterisk places the call to your SIP device
regardless,
since by SIP protocol design the UA is not a "slave", it is free. So
the SIP ua must
answer "busy" for Asterisk to understand that you're busy. If not,
the call is placed
to you and Asterisk has no knowledge that you are busy. Check you SIp phone if
you can
limit the number of concurrent calls.
There's some code in Asterisk chan_sip.c to limit the number of calls placed
to
a SIP phone, but right now it's not working at all.
/Olle
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users