asterisk users - Feb 2004 - Details on TE410P Digium cards

Hello,

I am looking to buy a large number of TE410P cards for a big
international project. I have studied the documentation and zaptel.conf
and as result I have the following questions:

1. How do you switch the card from ISDN PRI TE to NT? This means from
being configured as User Equipment (the PABX) to be Network Equipment
(the Exchange).

2. How do you configure the card for E1 or T1?

3. In case of ISDN PRI over T1 Does it work with Line Type: PRI,
channelised (23B + 1D) and CCS signalling? Where do you specify this
setting?

4. Does it work with Trunk Type: TIE (incoming and outgoing calls)?
Where do you set it?

5. Where do you specify: Channel Type: voice-only

Thank you very much,
Dan.

Dan Iordanescu wrote:
[snip]
> 1. How do you switch the card from ISDN PRI TE to NT? This means from
> being configured as User Equipment (the PABX) to be Network Equipment
> (the Exchange).
This is done in the /etc/asterisk/zapata.conf file.
>
> 2. How do you configure the card for E1 or T1?
This is done with jumpers on the card, per port.
> 3. In case of ISDN PRI over T1 Does it work with Line Type: PRI,
> channelised (23B + 1D) and CCS signalling? Where do you specify this
> setting?
>
Yes, in /etc/zaptel.conf

Mine looks like this:
;Incoming PRI
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24

;Incoming PRI1
span=2,2,0,esf,b8zs
bchan=25-47
dchan=48
..........
> 4. Does it work with Trunk Type: TIE (incoming and outgoing calls)?
> Where do you set it?
>
dunno.  Never tried that.
> 5. Where do you specify: Channel Type: voice-only
>
dunno what exactly you mean.  Mine has voice-only... and I didn't set
anything, so if that's what you mean...
> Thank you very much,
> Dan.
Hope this helps,
David Gomillion