Hi, I try to use ISDN4Linux drivers with Asterisk. In modem.conf i put /dev/ttyIO. Everything is OK when i lauch asterisk but, when i call Asterisk nothing happen. Someone can help me ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030407/13e78d8e/attachment.htm
Check the kern.log and/or the /var/log/messages for ISDN error codes. In my case the problem was due to 2 problems: an incorrect isdn hisax module configuration and, that's incredibile to say, the ISDN cable that needed to be inverted (the RJ plug on the modem to be put into the BRI and vice-versa :) ) -- Stefano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030407/b5c7f7d6/attachment.htm
I mean that * is my msn number.
I have set msn=26 and incomingmsn=26,25. But I still have the problem.
I have set driver=i4l
and type = autodetect
Rattana
----- Original Message -----
From: it
To: asterisk-users@lists.digium.com
Sent: Tuesday, April 08, 2003 5:39 PM
Subject: Re: [Asterisk-Users] ISDN4Linux problems
Set the MSN=* in the modem.conf.
Try it please.
john
----- Original Message -----
From: Rattana BIV
To: Asterisk-Users@lists.digium.com
Sent: Monday, April 07, 2003 6:41 AM
Subject: [Asterisk-Users] ISDN4Linux problems
Hi,
I try to use ISDN4Linux drivers with Asterisk.
In modem.conf i put /dev/ttyIO.
Everything is OK when i lauch asterisk but, when i call Asterisk nothing
happen.
Someone can help me ?
Rattana
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20030408/3a0f8613/attachment.htm
I noticed that you put /dev/ttyIO - surely this should be /dev/ttyI0 (numberal zero at end) On Tuesday 08 April 2003 09:56, Rattana BIV wrote:> I mean that * is my msn number. > I have set msn=26 and incomingmsn=26,25. But I still have the problem. > I have set driver=i4l > and type = autodetect > > Rattana > ----- Original Message ----- > From: it > To: asterisk-users@lists.digium.com > Sent: Tuesday, April 08, 2003 5:39 PM > Subject: Re: [Asterisk-Users] ISDN4Linux problems > > > Set the MSN=* in the modem.conf. > Try it please. > > > > john > ----- Original Message ----- > From: Rattana BIV > To: Asterisk-Users@lists.digium.com > Sent: Monday, April 07, 2003 6:41 AM > Subject: [Asterisk-Users] ISDN4Linux problems > > > Hi, > > I try to use ISDN4Linux drivers with Asterisk. > In modem.conf i put /dev/ttyIO. > > > Everything is OK when i lauch asterisk but, when i call Asterisk > nothing happen. > > Someone can help me ? > > > Rattana
Hi List, At Last now I need to do what I was always wanted to do with *. I need to implement a Predictive dialer using *, And as far as my understanding goes, I just need to find out the response of the Call in terms of UnAnswered, VoiceMail, Number Not in Use etc. Is there is a way to find out these call results automatically ? I have seen sample.call but I think it is only for one channel. In "PD" I need to Dial for Almost "n" number of channels. I have got Cisco AS5300 and also T100P, So I can use either H.323 or IAX for this. Can any one suggest something ? I feel * can handle Zap better than H323 as the support for Zap is built in and also much more stable as compare to H323. I am waiting to kick start and may release the code to community once the module gets stable. Thankx in Advance, /hem
Set the MSN=* in the modem.conf. Try it please. john ----- Original Message ----- From: Rattana BIV To: Asterisk-Users@lists.digium.com Sent: Monday, April 07, 2003 6:41 AM Subject: [Asterisk-Users] ISDN4Linux problems Hi, I try to use ISDN4Linux drivers with Asterisk. In modem.conf i put /dev/ttyIO. Everything is OK when i lauch asterisk but, when i call Asterisk nothing happen. Someone can help me ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030407/749cd729/attachment.htm
yes. * is the MSN number.
set MSN=*
set incomingmsn=*
----- Original Message -----
From: Rattana BIV
To: asterisk-users@lists.digium.com
Sent: Tuesday, April 08, 2003 12:56 AM
Subject: Re: [Asterisk-Users] ISDN4Linux problems
I mean that * is my msn number.
I have set msn=26 and incomingmsn=26,25. But I still have the problem.
I have set driver=i4l
and type = autodetect
Rattana
----- Original Message -----
From: it
To: asterisk-users@lists.digium.com
Sent: Tuesday, April 08, 2003 5:39 PM
Subject: Re: [Asterisk-Users] ISDN4Linux problems
Set the MSN=* in the modem.conf.
Try it please.
john
----- Original Message -----
From: Rattana BIV
To: Asterisk-Users@lists.digium.com
Sent: Monday, April 07, 2003 6:41 AM
Subject: [Asterisk-Users] ISDN4Linux problems
Hi,
I try to use ISDN4Linux drivers with Asterisk.
In modem.conf i put /dev/ttyIO.
Everything is OK when i lauch asterisk but, when i call Asterisk nothing
happen.
Someone can help me ?
Rattana
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20030408/e2a94b66/attachment.htm