I have an issue with cdrecord though and I can't figure it out. I use
Webmin, which basically just creates an iso and then uses cdrecord to
burn it and it worked fine with previously installed CentOS 4 (I wiped
and reinstalled about 8 months ago).
This is the command that Webmin tries to execute...
cdrecord -v dev=0,0,0 speed=4 -isosize \
'/home/Linux/CentOS-4/CentOS-4.2-i386-bin4of4.iso'
The result of cdrecord -scanbus at bottom of email. Log of error just
below.
Help appreciated...
Craig
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/pg0'. Cannot open
SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J??rg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this
version.
TOC Type: 1 = CD-ROM
# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J?rg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus0:
0,0,0 0) 'COMBI ' 'RW16x10/DVD '
'H1.1' Removable
CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
--- Craig White <craigwhite at azapple.com> wrote:> I have an issue with cdrecord though and I can't > figure it out. I use > Webmin, which basically just creates an iso and then > uses cdrecord to > burn it and it worked fine with previously installed > CentOS 4 (I wiped > and reinstalled about 8 months ago). > > This is the command that Webmin tries to execute... > > cdrecord -v dev=0,0,0 speed=4 -isosize \ > '/home/Linux/CentOS-4/CentOS-4.2-i386-bin4of4.iso' > > The result of cdrecord -scanbus at bottom of email. > Log of error just > below. > > Help appreciated... > > Craig > > cdrecord: No write mode specified. > cdrecord: Asuming -tao mode. > cdrecord: Future versions of cdrecord may have > different drive dependent defaults. > cdrecord: Continuing in 5 seconds... > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > cdrecord: No such file or directory. Cannot open > '/dev/pg0'. Cannot open SCSI driver. > cdrecord: For possible targets try 'cdrecord > -scanbus'. > cdrecord: For possible transport specifiers try > 'cdrecord dev=help'. > Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) > Copyright (C) 1995-2004 J??rg Schilling > Note: This version is an unofficial (modified) > version with DVD support > Note: and therefore may have bugs that are not > present in the original. > Note: Please send bug reports or support requests to > http://bugzilla.redhat.com/bugzilla > Note: The author of cdrecord should not be bothered > with problems in this version. > TOC Type: 1 = CD-ROM > > # cdrecord -scanbus > Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) > Copyright (C) 1995-2004 J???rg > Schilling > Note: This version is an unofficial (modified) > version with DVD support > Note: and therefore may have bugs that are not > present in the original. > Note: Please send bug reports or support requests to > http://bugzilla.redhat.com/bugzilla > Note: The author of cdrecord should not be bothered > with problems in > this version. > scsidev: 'ATA' > devname: 'ATA' > scsibus: -2 target: -2 lun: -2 > Linux sg driver version: 3.5.27 > Using libscg version 'schily-0.8'. > cdrecord: Warning: using inofficial libscg transport > code version > (schily - Red Hat-scsi-linux-sg.c-1.83-RH > '@(#)scsi-linux-sg.c > 1.83 04/05/20 Copyright 1997 J. Schilling'). > scsibus0: > 0,0,0 0) 'COMBI ' 'RW16x10/DVD ' > 'H1.1' Removable > CD-ROM > 0,1,0 1) * > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >craig, the only time i have had troubles like that is when the ide-cd would load before the ide-scsi. check to see if both ide-scsi and ide-cd are loaded....but not sure if this is your problem.. can not remember if i was able to see the drive when this happened to me. Steven "On the side of the software box, in the 'System Requirements' section, it said 'Requires Windows or better'. So I installed Linux."
> I have an issue with cdrecord though and I can't figure it out. I use > Webmin, which basically just creates an iso and then uses cdrecord to > burn it and it worked fine with previously installed CentOS 4 (I wiped > and reinstalled about 8 months ago). > > This is the command that Webmin tries to execute... > > cdrecord -v dev=0,0,0 speed=4 -isosize \ > '/home/Linux/CentOS-4/CentOS-4.2-i386-bin4of4.iso'I am certainly no expert at cdrecord .. but I would drop the "-isosize". Also, you may be able to use dev=</dev/devicename> as well. HTH, Barry
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, May 02, 2006 at 05:40:25PM -0700, Craig White wrote:> I have an issue with cdrecord though and I can't figure it out. I use > Webmin, which basically just creates an iso and then uses cdrecord to > burn it and it worked fine with previously installed CentOS 4 (I wiped > and reinstalled about 8 months ago). > > This is the command that Webmin tries to execute... > > cdrecord -v dev=0,0,0 speed=4 -isosize \ > '/home/Linux/CentOS-4/CentOS-4.2-i386-bin4of4.iso'Try: dev=ATAPI:0,0,0 []s - -- Rodrigo Barbosa <rodrigob at suespammers.org> "Quid quid Latine dictum sit, altum viditur" "Be excellent to each other ..." - Bill & Ted (Wyld Stallyns) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFEWMxSpdyWzQ5b5ckRAk0QAJ4nvPOYNGaVMDsa6xaUAP/axO8Y5QCgqK0P WpEJwdLwLxLX0IDWFjHV1HE=SV99 -----END PGP SIGNATURE-----