Displaying 20 results from an estimated 2000 matches similar to: "chan_sccp compile problem w/ CVS head?"
2005 Jan 12
7
Operator Panels?
Ok, we're trying to use Asterisk as a PBX in our office. Our original
plan was to use a Cisco 7960 with a 7914 attached. Short story is, no
one updated chan_sccp in a long time and the 7914 is questionable at
best anyway from what I've heard. We couldn't ever get chan_sccp to
compile, I went to an older version of Asterisk and that broke some of
our SIP devices. We tried using a couple
2005 Jun 07
1
CallerID/chan_sccp
When sending a call to a line defined on chan_sccp,
there is an error on the console that says:
Jun 7 08:22:29 WARNING[3924]: sccp_channel.c:79
sccp_channel_send_callinfo: Incoming call SCCP/Line1-00000008 doesn't
have CallerId name
Is this because of the changes in the callerid name from stable to head?
Or does someone know of a way to correct this?
--
respectfully, Joseph
2004 Aug 16
2
Problem compiling chan_sccp
Hi,
I recently bought a 7910. I found out too late that it would not do
SIP as I initially thought. Anyway before ditchingit for a 7960 I
wanted to try it out, I read that the guys at
http://chan-sccp.sourceforge.net/ had done some improvements to the
original chan_sccp driver and having 80% functionality with this
model.
I have not been able to compile their driver and keep getting the
2004 Aug 20
6
Sipura endpoints
Anyone have experience with Sipura's? Anyone know if they offer a
warranty? Would like opinions on these, good or flame.
We bought *one* to test with and it died, can't even get a
response from Sipura "support". Could anyone recommend another device to
replace these? Prefer 1 or 2 port design.
Ty :-)
2004 Aug 24
7
SMP Performance
We're looking at implementing Asterisk in our department in the near
future, we're looking at anywhere from 15-25 extensions. The machine we
were looking at running this on was a Quad Xeon 450mhz (2MB L2 Cache) w/
1GB of ram. I've heard bad things about running Asterisk on SMP
machines? Would we be running into any performance issues with this
machine?
Tim Jackson
Network Engineer
2005 Mar 15
6
Realtime config
Having problems getting realtime working, I'm trying to use odbc for all
of this. I've got Fedora 3 and have been fighting with odbc for a day
now. I think I got it working correctly, however I can't seem to get the
realtime portion working. In asterisk 'odbc show' shows it connected, I
see it on my (odbc) mysql server connected and all, it connects and just
idles. So, without
2005 Jun 04
0
chan_sccp / 7960: Messages key, line / speeddial keys
On Sat, Jun 04, 2005 at 10:09:29AM +0200, Stefan Gofferje arranged a set of bits into the following:
> Hi folks,
>
> there are some 3rd party patches available for chan_sccp which add a
> feature and fix a few problems:
>
> http://www.sineapps.com/news.php?rssid=726
>
> sccp_cli.c.diff <http://www.newace.com/asterisk/sccp_cli.c.diff>
> Adds support for
2004 Aug 22
5
skinny or sccp?
Hi, please tell me,
is original skinny support in Asterisk stil under development or is better to try chan_sccp from
http://chan-sccp.sourceforge.net ?
my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup)
and my phone (C7940) seems to be not supported in original chan_skinny :(
PJ
2005 Mar 24
14
Realtime mysql problem?
All, I get this whenever trying to dial to a peer when the peer
registered to another server. I'm basically trying to use realtime to
check for the peer and dial it.
Mar 24 09:16:47 VERBOSE[4527]: -- Executing Dial("SIP/brak-f69f",
"IAX2/brak-test/107") in new stack
Mar 24 09:16:47 DEBUG[4527]: MySQL RealTime: Retrieve SQL: SELECT * FROM
sip_users WHERE name =
2004 Dec 30
6
Nagios and Asterisk
Does anyone have some decent Nagios scripts out there that do more than
monitor the proc itself? Rather than reinvite the wheel, figured I'd
ask. I already saw the one on the wiki.
Matt
2004 Nov 17
3
chan-sccp problem, phone is not registering
Hi list!
I'm trying to configure the Kirk IP 600 wireless (DECT) system. The
wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip
part by registering/gatewaying the phones to a callmanager server.
The phones do not work and I think the problem is that they do not
register at asterisk but I'm not sure because I don't understand a thing
of the sccp/skinny
2004 Aug 23
3
Cisco 7960G, Skinny.conf, and reboots
I could use some skinny/Cisco help here. Was finally able to get the phone
registered to * but whenever someone tries to call that phone it freezes and
reboots itself. Same thing happens when you pick the handset up off the
7960G; it locks and reboots about 5 sec later.
Here is what * shows when I plug the phone in:
-- Starting Skinny session from 64.72.107.1
Device SEP000F3442E4A7 is
2005 May 31
4
Chan_sccp / wiki
The chan_sccp page at
http://www.voip-info.org/tiki-index.php?page=chan_sccp2 has been
updated.
See the bottom of the page.
Thanks.
Comments welcome.
--
respectfully, Joseph ===============
---------------------= ********** =
2004 Oct 01
1
chan_sccp error
Hello folks,
I'm trying to install chan_sccp and get this error
[chan_sccp.so]Oct 2 00:28:06 WARNING[-151090528]: loader.c:248
ast_load_resource: /usr/lib/asterisk/modules/chan_sccp.so: undefined
symbol: __use_ast_pthread_create_instead__
Oct 2 00:28:06 WARNING[-151090528]: loader.c:429 load_modules: Loading
module chan_sccp.so failed!
After this, mpg123 goes crazy and shoots my
2006 Jan 17
2
chan_sccp crashes Asterisk on startup
Say there!
This is a new Asterisk install on Fedora; I downloaded and installed
Asterisk 1.2.1 and it runs fine. I downloaded the 20051217 version of
chan_sccp, compiled and it installs ok.
When I start Asterisk, it dies on startup at the activation/recognition of
the chan_sccp module...
A snippit from the startup:
Asterisk Dynamic Loader Starting:
[res_musiconhold.so] => (Music On Hold
2006 Feb 03
2
chan_sccp availability?
hi,
I'm trying to get the latest chan_sccp. The links from
http://chan-sccp.berlios.de are all dead. Is it just me? Does anyone
know an alternate source to get chan_sccp?
Seems like chan_sccp is the way to go if I have a bunch of cisco
phones I don't want to use SIP on? Anyone else have an opinion on the
built in asterisk skinny vs the chan_sccp?
thanks,
Andy
2005 Jan 13
1
SCCP questions
Hi!
I have two, not too related questions:
- the probably simpler one: if anyone can help me out using a Cisco
7905G with chan_sccp? I did already managed to get it working with a SIP
image, I'd just like to see it work with this one as well. It's probably
something I screw up with the configuration, as the phone registers,
only I don't get any lines with it, although I have it
2005 Jul 13
5
chan_sccp new release
http://chan-sccp.berlios.de/
20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2
I didn't have a spare 7960 to use this week, so maybe some line issue is
still present.
- fixed a memory leak on database updates (dnd, cfwd*)
- fixed old memory leak on unload (now unload chan_sccp.so and load
chan_sccp.so work. It does reload the config when asterisk is running)
- socket
2005 Feb 02
1
[OT - somewhat] chan_sccp status
Just wondering,
I noticed on the chan_sccp site that a new release should have been
released on 20-Jan-2005. Is there any news on the status of this
release? As far as I can tell even the sourceforge CVS for chan_sccp
didn't change much around that time - or since.
-Chris
2004 Apr 01
1
Asterisk + Cisco 7920 + chan_sccp or chan_skinny
Greetings,
I have seen a few postings in the past regarding the interop of Asterisk and
the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to
getting the phone working. Assuming someone has this actually working, can
that person step up and answer these questions.
1) What Channel is it working with (chan_skinny or chan_sccp)?
2) If code was used that is not a part of a