thr3ads.net - asterisk users - [Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots [Aug 2004]

If this information is useful, please help other people find it:
Share via:

Matthew Boehm

2004-Aug-23 14:00 UTC

[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

I could use some skinny/Cisco help here.  Was finally able to get the phone
registered to * but whenever someone tries to call that phone it freezes and
reboots itself. Same thing happens when you pick the handset up off the
7960G; it locks and reboots about 5 sec later.

Here is what * shows when I plug the phone in:

    -- Starting Skinny session from 64.72.107.1
Device SEP000F3442E4A7 is attempting to register
    -- Device 'Matthew' successfuly registered
Requesting capabilities
RECEIVED UNKNOWN MESSAGE TYPE:  2b
Received CapabilitiesRes
RECEIVED UNKNOWN MESSAGE TYPE:  2b
Buttontemplate requested
Recieved SoftKey Template Request
Received SoftKeySetReq
Received LineStateReq
RECEIVED UNKNOWN MESSAGE TYPE:  2d
Received Time/Date Request

And when I pick up the hand set:

-- Starting simple switch on '100@Matthew'

No dialtone heard. 5 seconds later phone reboots.

------------------------------------------------------

Model: CP-7960G
App Load ID: P00306000400
Boot Load ID: PC030301001

Asterisk CVS-HEAD-07/14/04-12:20:42

skinny.conf
------------------
[Matthew]
device=SEP000F3442E4A7
version=P00306000400
nat=yes
callerid="Matthew Boehm" <3044>
transfer=1
callwaiting=1
threewaycalling=1
context=matthew
linelabel=my line lable
mailbox=100
line => 100
dtmfmode=rfc2833

Any help on this would be appreciated.

Thanks,
Matthew

Jeremy McNamara

2004-Aug-23 19:13 UTC

head link

[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

Matthew Boehm wrote:
> I could use some skinny/Cisco help here.  Was finally able to get the phone
> registered to * but whenever someone tries to call that phone it freezes
and
> reboots itself. Same thing happens when you pick the handset up off the
> 7960G; it locks and reboots about 5 sec later.
> 
> Here is what * shows when I plug the phone in:

Send me a etheral dump off list.


Jeremy McNamara

Kubat, Philip

2004-Aug-24 06:49 UTC

head link

[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

Sorry not to directly answer your questions, but I would recommend
http://sourceforge.net/projects/chan-sccp/


I do not know the number of people using skinny vs sccp2, but I believe for
are using sccp2.  Maybe others can comment here.



-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Matthew Boehm
Sent: Monday, August 23, 2004 5:01 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

I could use some skinny/Cisco help here.  Was finally able to get the phone
registered to * but whenever someone tries to call that phone it freezes and
reboots itself. Same thing happens when you pick the handset up off the
7960G; it locks and reboots about 5 sec later.

Here is what * shows when I plug the phone in:

    -- Starting Skinny session from 64.72.107.1
Device SEP000F3442E4A7 is attempting to register
    -- Device 'Matthew' successfuly registered
Requesting capabilities
RECEIVED UNKNOWN MESSAGE TYPE:  2b
Received CapabilitiesRes
RECEIVED UNKNOWN MESSAGE TYPE:  2b
Buttontemplate requested
Recieved SoftKey Template Request
Received SoftKeySetReq
Received LineStateReq
RECEIVED UNKNOWN MESSAGE TYPE:  2d
Received Time/Date Request

And when I pick up the hand set:

-- Starting simple switch on '100@Matthew'

No dialtone heard. 5 seconds later phone reboots.

------------------------------------------------------

Model: CP-7960G
App Load ID: P00306000400
Boot Load ID: PC030301001

Asterisk CVS-HEAD-07/14/04-12:20:42

skinny.conf
------------------
[Matthew]
device=SEP000F3442E4A7
version=P00306000400
nat=yes
callerid="Matthew Boehm" <3044>
transfer=1
callwaiting=1
threewaycalling=1
context=matthew
linelabel=my line lable
mailbox=100
line => 100
dtmfmode=rfc2833

Any help on this would be appreciated.

Thanks,
Matthew

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Pavel Jezek

2004-Aug-25 00:20 UTC

head link

[Asterisk-Users] Re: Cisco 7960G, Skinny.conf, and reboots

Hi,
I had exactly same problem, so I tried alternative suport for skinny/sccp
located at:
http://chan-sccp.sourceforge.net
and it works now fine.
I use CVS for both - Asterisk and chan_sccp
If you got module errors during compile or Asterisk startup, you can try my
modification of chan_source below
PJ


----- Original Message ----- 
From: Pavel Jezek 
Newsgroups: gmane.comp.telephony.pbx.asterisk.user
Sent: Monday, August 23, 2004 7:19 PM
Subject: Re: skinny or sccp?


Hi, I got following error,
so I made changes in chan_sccp.c and sccp_device.c and replace
"pthread_create" function with with "ast_pthread_create"
the module now loading fine with asterisk :o)
PJ


[root@pj0 chan_sccp]# make
Now compiling .... chan_sccp.c          706 lines
chan_sccp.c: In function `reload_config':
chan_sccp.c:552: warning: implicit declaration of function
`__use_ast_pthread_create_instead__'
Now compiling .... sccp_actions.c       790 lines
Now compiling .... sccp_channel.c       279 lines
Now compiling .... sccp_device.c        641 lines
sccp_device.c: In function `sccp_dev_allocate_channel':
sccp_device.c:444: warning: implicit declaration of function
`__use_ast_pthread_create_instead__'
Now compiling .... sccp_line.c          61 lines

_______________________________________________

  ----- Original Message ----- 
  From: Matthew Boehm 
  Newsgroups: gmane.comp.telephony.pbx.asterisk.user
  Sent: Monday, August 23, 2004 11:00 PM
  Subject: Cisco 7960G, Skinny.conf, and reboots


  I could use some skinny/Cisco help here.  Was finally able to get the phone
  registered to * but whenever someone tries to call that phone it freezes and
  reboots itself. Same thing happens when you pick the handset up off the
  7960G; it locks and reboots about 5 sec later.

  Here is what * shows when I plug the phone in:

      -- Starting Skinny session from 64.72.107.1
  Device SEP000F3442E4A7 is attempting to register
      -- Device 'Matthew' successfuly registered
  Requesting capabilities
  RECEIVED UNKNOWN MESSAGE TYPE:  2b
  Received CapabilitiesRes
  RECEIVED UNKNOWN MESSAGE TYPE:  2b
  Buttontemplate requested
  Recieved SoftKey Template Request
  Received SoftKeySetReq
  Received LineStateReq
  RECEIVED UNKNOWN MESSAGE TYPE:  2d
  Received Time/Date Request

  And when I pick up the hand set:

  -- Starting simple switch on '100@Matthew'

  No dialtone heard. 5 seconds later phone reboots.

  ------------------------------------------------------

  Model: CP-7960G
  App Load ID: P00306000400
  Boot Load ID: PC030301001

  Asterisk CVS-HEAD-07/14/04-12:20:42

  skinny.conf
  ------------------
  [Matthew]
  device=SEP000F3442E4A7
  version=P00306000400
  nat=yes
  callerid="Matthew Boehm" <3044>
  transfer=1
  callwaiting=1
  threewaycalling=1
  context=matthew
  linelabel=my line lable
  mailbox=100
  line => 100
  dtmfmode=rfc2833

  Any help on this would be appreciated.

  Thanks,
  Matthew

  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users@lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040825/54470b80/attachment.htm

Possibly Parallel Threads

Search for more possibly parallel threads

asterisk users - Aug 2004 - Cisco 7960G, Skinny.conf, and reboots

[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

[Asterisk-Users] Cisco 7960G, Skinny.conf, and reboots

[Asterisk-Users] Re: Cisco 7960G, Skinny.conf, and reboots

Possibly Parallel Threads