Charles Lepple
2013-Sep-04 00:09 UTC
[Nut-upsdev] [HCL] Forza FX-1500LCD supported by blazer_usb
Gabor: note, these HCL reports go to the nut-upsdev list. Begin forwarded message:> From: Gabor Tjong A Hung > Subject: Re: Network UPS Tools - Compatibility List > Date: September 3, 2013 2:18:31 PM EDT > > Sorry, > I just noticed the "If your device isn?t listed" part: > > [HCL] Forza FX-1500LCD supported by blazer_usb > > > [root at freenas] ~# upsc ups > battery.charge: 100 > battery.voltage: 27.20 > battery.voltage.high: 26.00 > battery.voltage.low: 20.80 > battery.voltage.nominal: 24.0 > device.type: ups > driver.name: blazer_usb > driver.parameter.pollinterval: 2 > driver.parameter.port: /dev/ugen3.2 > driver.version: 2.6.5 > driver.version.internal: 0.09 > input.current.nominal: 12.0 > input.frequency: 59.9 > input.frequency.nominal: 60 > input.voltage: 132.2 > input.voltage.fault: 132.2 > input.voltage.nominal: 120 > output.voltage: 132.2 > ups.beeper.status: enabled > ups.delay.shutdown: 30 > ups.delay.start: 180 > ups.load: 5 > ups.productid: 5161 > ups.status: OL > ups.temperature: 25.0 > ups.type: offline / line interactive > ups.vendorid: 0665 > [root at freenas] ~# upsrw ups > [root at freenas] ~# > [root at freenas] ~# cat /usr/local/etc/nut/upsd.users > [upsmon] > password = fixmepass > upsmon master > > [root at freenas] ~# upscmd -u upsmon -p fixmepass ups shutdown.return > Unexpected response from upsd: ERR ACCESS-DENIED > > Same for root > > [root at freenas] ~# upscmd -u root ups test.battery.stop > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups test.battery.start.deep > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups test.battery.start > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups shutdown.stop > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups shutdown.stayoff > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups shutdown.return > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > > > > On Tue, Sep 3, 2013 at 2:26 PM, Gabor Tjong A Hung wrote: > Hi Charles Lepple, > > Thank you for your effort. > > I'd like to notify you with the following: > I have a Forza FX-1500 and it seems to work with the blazer_usb driver. > It would be nice to have it included in the HW Compatibility List. > If you would be so kind to provide me with a few things I should test, I would gladly assist. > > Kind regards, > Gabor >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20130903/e2ca00b3/attachment.html>
Arnaud Quette
2013-Sep-07 20:43 UTC
[Nut-upsdev] [HCL] Forza FX-1500LCD supported by blazer_usb
2013/9/4 Charles Lepple <clepple at gmail.com>> Gabor: note, these HCL reports go to the nut-upsdev list. > > Begin forwarded message: > > *From: *Gabor Tjong A Hung > *Subject: **Re: Network UPS Tools - Compatibility List* > *Date: *September 3, 2013 2:18:31 PM EDT > * > * > Sorry, > I just noticed the "*If your device isn?t listed"* part: > > [HCL] Forza FX-1500LCD supported by blazer_usb > > > [root at freenas] ~# upsc ups > battery.charge: 100 > battery.voltage: 27.20 > battery.voltage.high: 26.00 > battery.voltage.low: 20.80 > battery.voltage.nominal: 24.0 > device.type: ups > driver.name: blazer_usb > driver.parameter.pollinterval: 2 > driver.parameter.port: /dev/ugen3.2 > driver.version: 2.6.5 > driver.version.internal: 0.09 > input.current.nominal: 12.0 > input.frequency: 59.9 > input.frequency.nominal: 60 > input.voltage: 132.2 > input.voltage.fault: 132.2 > input.voltage.nominal: 120 > output.voltage: 132.2 > ups.beeper.status: enabled > ups.delay.shutdown: 30 > ups.delay.start: 180 > ups.load: 5 > ups.productid: 5161 > ups.status: OL > ups.temperature: 25.0 > ups.type: offline / line interactive > ups.vendorid: 0665 > [root at freenas] ~# upsrw ups > [root at freenas] ~# > [root at freenas] ~# cat /usr/local/etc/nut/upsd.users > [upsmon] > password = fixmepass > upsmon master > > [root at freenas] ~# upscmd -u upsmon -p fixmepass ups shutdown.return > Unexpected response from upsd: ERR ACCESS-DENIED > > Same for root > > [root at freenas] ~# upscmd -u root ups test.battery.stop > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups test.battery.start.deep > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups test.battery.start > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups shutdown.stop > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups shutdown.stayoff > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > [root at freenas] ~# upscmd -u root ups shutdown.return > Password: > Unexpected response from upsd: ERR ACCESS-DENIED > > > > On Tue, Sep 3, 2013 at 2:26 PM, Gabor Tjong A Hung wrote: > >> Hi Charles Lepple, >> >> Thank you for your effort. >> >> I'd like to notify you with the following: >> I have a Forza FX-1500 and it seems to work with the blazer_usb driver. >> It would be nice to have it included in the HW Compatibility List. >> If you would be so kind to provide me with a few things I should test, I >> would gladly assist. >> >> Kind regards, >> Gabor >> > > >committed to Git master: https://github.com/networkupstools/nut/commit/da2ace6f945b2cc510fd4bbed1becc364efff329 cheers, Arno -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20130907/13f6fbb5/attachment.html>
Charles Lepple
2014-Feb-07 03:28 UTC
[Nut-upsdev] [HCL] Forza FX-1500LCD supported by blazer_usb
>> [HCL] Forza FX-1500LCD supported by blazer_usb >> >> >> [root at freenas] ~# upsc ups...>> device.type: ups >> driver.name: blazer_usb >> driver.parameter.pollinterval: 2 >> driver.parameter.port: /dev/ugen3.2 >> driver.version: 2.6.5...>> ups.productid: 5161 >> ups.status: OL >> ups.temperature: 25.0 >> ups.type: offline / line interactive >> ups.vendorid: 0665Gabor, which version of FreeBSD is this running on? (Or which version of FreeNAS, and we can look up the FreeBSD version.) We're seeing a failure of this same driver/subdriver on different hardware, but on FreeBSD 9.1. Thanks, -- Charles Lepple clepple at gmail