search for: blazer_usb

...r debug output. You can obtain the latter using the following command, as root and after having stopped NUT: When trying to start nut, get an error for permission denied; # upsdrvctl -DD start 0.000130 Starting UPS: ups 0.000159 3 remaining attempts 0.000171 exec: /usr/local/libexec/nut/blazer_usb -a ups Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2) Supported UPS detected with megatec protocol Permissions problem: Input/output error 1.373820 Driver failed to start (exit status=1) 6.374337 2 remaining attempts 6.374378 exec: /usr/local/libexec/nut/blazer_usb -a ups...

...connected by USB cables. Each UPS is Eaton NV 2000H. (eaton_1, eaton_2, eaton_3) The connection is fine with each UPS, if it is configured alone. If i configure two or all three, the connections broke up. After nut started, tried to start upsdrv manually (eaton_1. The log: Apr 4 00:43:46 mail blazer_usb[10799]: Startup successful Apr 4 00:43:47 mail upsd[10752]: Connected to UPS [eaton_2]: blazer_usb-eaton_2 Apr 4 00:43:50 mail upsmon[10760]: Communications with UPS eaton_2 at localhost established Apr 4 00:43:50 mail upsmon[10760]: Poll UPS [eaton_3 at localhost] failed - Driver not connected...

Hi all, after a change of UPS (to Atlantis Host Power 851) I began to use the new driver blazer_usb and compared to old one (blazer used with serial connection) I noted more CPU use and errors in dmesg: [...] [256712.584370] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 [256789.640795] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8...

...one more chance. Prebuilt binary RPM available for CentOS4 (nut-2.2.0-4.el4) ships with older megatec_usb driver that still don't work with Ippon UPSes connected through USB. So I have fetched latest revision of NUT from SVN and tried both megatec protocol usb drivers from it: megatec_usb and blazer_usb. megatec_usb driver in debug mode showed up that there's some king of connection with UPS but correct status readings were obtained once in a 5-10 tries. blazer_usb showed up no connections with UPS at all. As Winpower on the same linux box was working perfectly my decision was to try to figur...

...x Foundation 2.0 root hub ... Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial The problem is that I have some failed messages: # dmesg ... [90941.136274] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 [91382.412323] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 [92037.704329] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 [92250.832357] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rq...

Hi all, I have an eaton ENV800HA connected for a freebsd 9.0 box with nut 2.6.5 installed (on the supported list). The UPS is connected using the Blazer_USB driver (not sure how to check its version). When I kick off upsd it detects the UPS no problems and I get all my information: battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.name: blazer_usb dr...

Hi, Thanks to some older discussions on this list I found it quite easy to eventually track down problem with using USB cable with some more of Megatec/Q1 UPSes. The trick (which is done in megatec_usb, but not in blazer_usb) is to read in the junk that somehow gets into read buffers before sending any commands. (I inserted debug statements so it's easy to see that the data read is really junk: in my case it's most often a middle piece of previous query and sometimes is appended with some fragments of /proc/sel...

Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups. with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This driver "blazer_usb" and this UPS have no problem...

On Nov 25, 2013, at 4:56 PM, Fabio Cecamore wrote: > Hi all, > after a change of UPS (to Atlantis Host Power 851) I began to use the new driver blazer_usb and compared to old one (blazer used with serial connection) I noted more CPU use and errors in dmesg: > > [...] > [256712.584370] usb 4-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 "ret -110" is a timeout, I believe. > Obviously the usb ports...

Hello, I am trying to make my UPS system working with NUT but with no success. I got "No supported UPS detected" message. I use the blazer_usb driver since it was proposed to me by the web site. My NUT version is : 2.7.1 (installed from standard RPM), release 2.41 The UPS identification: INFOSEC X4 RM PLUS linux-2qya:~ # /usr/lib/ups/driver/blazer_usb -a infosec Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) No supporte...

I'm running Ubuntu 14.04.1 with nut 2.7.1-1ubuntu1, using a Powerwalker/INNO TECH ups. It used to working fine, but lately blazer_usb just executes a few commands and then terminates with a "Got disconnected by another driver" message. Any suggestions? Example output from blazer_usb with loads of debug: # /lib/nut/blazer_usb -DDDDDDDDDDDDDDDDDDDDDD -a nasups Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2....

On Nov 12, 2014, at 2:49 AM, Klint Gore <kgore4 at une.edu.au> wrote: > Can someone give me a push in the right direction with this? I?m trying to get an upsonic IRT1000 to work on ubuntu 14.04lts using the usb connection. The most likely drivers (blazer_usb and usbhid-ups) don?t seem to recognize it or I?ve got the configuration parameters wrong. I?ve got no idea what driver it actually wants though there?s an old thread that seems to have got it to work with snmp by adding an snmp card to it. I suspect it's handled by blazer_usb (or nutdrv_qx,...

Hi, I am using a ALLNET 91500 UPS with blazer_usb driver /usr/lib/ups/driver/blazer_usb -a ups91500 -L Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) I have this settings: upsc ups91500 at localhost battery.charge: 100 battery.runtime: 12000 battery.voltage: 27.50 battery.voltage.high: 27.3 battery.voltage.low: 18.0 device.ty...

On Mar 7, 2014, at 4:12 PM, Josu Lazkano <josu.lazkano at gmail.com> wrote: > Are the messages a problem? Or could I ignore? Since they aren't happening on each poll interval, they are not a big problem. The driver should recognize -110 as a timeout, and retry the query.

...al, they are not a big problem. The driver should recognize -110 as a timeout, and retry the query. Thanks for the answer Charles, This is the times that it fails: # tail -f /var/log/syslog | grep blazer Mar 8 14:33:48 server kernel: [152463.672358] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 Mar 8 14:36:55 server kernel: [152650.816372] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 Mar 8 14:45:03 server kernel: [153138.876267] usb 1-3.7: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 Mar 8 14:...

...Humberto M?ckel <hamberthm at gmail.com> wrote: > I've successfully configured UPSMON to monitor the UPS status, and do the shutdown procedure by calling the SHUTDOWNCMD on a simple bat file I've made. This bat file is as follows: > > cd C:\Program Files (x86)\NUT\bin > blazer_usb -a HAMUPS -k > pause > > So this should send the shutdown command to the UPS and start the shutdown timer (I've not added the Windows shutdown part to the bat file yet). The problem is that BLAZER_USB sends the command "shutdown_stop" three times to the router and then repor...

Hi, another UPS piece supported by blazer_usb: ALLSAI model LV 2K upsc output: battery.voltage: 82.08 battery.voltage.nominal: 72.0 beeper.status: enabled device.mfr: device.model: LV 2K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03...

...list. Begin forwarded message: > From: Gabor Tjong A Hung > Subject: Re: Network UPS Tools - Compatibility List > Date: September 3, 2013 2:18:31 PM EDT > > Sorry, > I just noticed the "If your device isn?t listed" part: > > [HCL] Forza FX-1500LCD supported by blazer_usb > > > [root at freenas] ~# upsc ups > battery.charge: 100 > battery.voltage: 27.20 > battery.voltage.high: 26.00 > battery.voltage.low: 20.80 > battery.voltage.nominal: 24.0 > device.type: ups > driver.name: blazer_usb > driver.parameter.pollinterval: 2 > drive...

....dev<at> gmail.com> writes: >>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>: >>>>> Hi all, >>>> Hi Chris, >>>> >>>>> After some research I've found that this device should run with the >>>>> blazer_usb driver. >>>>> >>>>> Jun 3 16:15:38 pegasus kernel: ugen0.4:<vendor 0x0001> at usbus0 >>>>> Jun 3 16:15:38 pegasus kernel: uhid0:<vendor 0x0001 product 0x0000, >>>>> class 0/0, rev 1.00/1.00, addr 4> on usbus0 >>>&g...

...ame and related information: -SVEN Power Pro+ 500 USB -Serial Number: K2300611 -http://en.sven.ru/catalog/ups/power_pro_plus_500.htm?tab=techchar ------- 1. cat driver.list | grep -i sven "SVEN" "ups" "2" "Power Pro+ series" "USB" "blazer_usb" "SVEN" "ups" "2" "Power Smart RM 2000" "USB" "blazer_usb" 2. lsusb output Bus 002 Device 001: ID 0000:0000 Bus 002 Device 002: ID 0925:1234 Lakeview Research Bus 001 Device 001: ID 0000:0000 3. My ups.conf [sven] d...