Has anyone gotten this model of tripp-lite to work?
sudo /usr/local/bin/upsdrvctl -DDDDD -u root start
Network UPS Tools - UPS driver controller 2.0.5
Starting UPS: tripplite
exec: /usr/local/bin/tripplite_usb -a tripplite
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.7 (2.0.5)
Warning: This is an experimental driver.
Some features may not function correctly.
Detected a UPS: TRIPP LITE/ TRIPP LITE SMART3000RM2U
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned 0 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -19 instead of 8
libusb_get_interrupt() returned -19 instead of 8
libusb_get_interrupt() returned -19 instead of 8
libusb_set_report() returned -19 instead of 8
Could not reset watchdog. Please send model information to nut-upsdev
mailing list
libusb_set_report() returned -19 instead of 8
Error reading protocol
Driver failed to start (exit status=1)
-- /usr/local/etc/ups.conf --
[tripplite]
driver = tripplite_usb
port = auto
bus = 002
desc = "Tripp-lite SmartPro"
-- 'lsusb -vv' output --
Bus 002 Device 003: ID 09ae:0001 Tripp Lite
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x09ae Tripp Lite
idProduct 0x0001
bcdDevice 0.01
iManufacturer 1 TRIPP LITE
iProduct 2 TRIPP LITE SMART3000RM2U
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 60mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
Usage Type Data
wMaxPacketSize 0x0008 bytes 8 once
bInterval 200
Language IDs: (length=4)
0409 English(US)
On 6/29/07, Michael Belanger <mrb at ciclops.org> wrote:> Has anyone gotten this model of tripp-lite to work? > > sudo /usr/local/bin/upsdrvctl -DDDDD -u root startupsdrvctl doesn't pass the "-DDDDD" portion to the driver -- see below the "exec" line below.> Network UPS Tools - UPS driver controller 2.0.5 > Starting UPS: tripplite > exec: /usr/local/bin/tripplite_usb -a trippliteJust run "/usr/local/bin/tripplite_usb -DDDDD -a tripplite" for testing. There have been a number of changes since 2.0.5, but the only one I see is an increase in the number of retries, and I am not sure yet if that will help. The "-DDDDD" output might shed some light on this, though. -- - Charles Lepple