Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer - http://arnaud.quette.free.fr/ Stefanos Sofroniou <ssofroni@cytanet.com.cy> 06/05/06 10:00 PM A arnaud.quette@mgeups.com cc Objet Fentonups driver - FreeBSD 6.x Dear Sir, My name is Stefanos Sofroniou and I have sent you another email long time ago regards to my UPS. My UPS is UPSilon2000 and for some reason fentonups driver does not support it. I have tried various drivers with negative results. This is what i get from it: $ /usr/local/libexec/nut/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - Fenton UPS driver 1.22 (2.0.3) Unknown ups - please report this ID string: #ON-LINE 1000VA H10R333 Detected Unknown 000VA on /dev/cuad0 $ I have changed permissions, onwer(s), created new group. I have tried everything i know. I have red all mail list from 2005 until present. No one has answered / replied to me since May you forwarded my email to mail list. I need your help to solve my problem. I can't have my server shutdown because here in my area we have every now and then power failure issue. Most of the times that this issue's happening I am not home and fortunately previously that I was using Windows i had the Windows program enable controlling server. Now that I have a FreeBSD dedicated server I cannot go back to Microsoft just for UPS usage. I am sure that you can do something about it. I can't anything else, I have tried everything. I hope you can do something about it. Thank you very much Stefanos Sofroniou -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20060606/133b2e58/attachment.htm
Like Arnaud said, "megatec" is only available on the development branch, but have you tried "powermust" on the stable release? If "powermust" doesn't work and you're willing to try the development branch, try running "megatec" like this "megatec -DDD -a yourups" and sending me the output. On 6/6/06, Arnaud QUETTE <Arnaud.QUETTE@mgeups.com> wrote:> > > Hi Stefanos, > > you should mail to the NUT list, and try the megatec driver, which is only > available from subversion for the moment (but should be included in > the next stable release). > > Carlos might give you some help with this driver. > > Stefanos Sofroniou <ssofroni@cytanet.com.cy> > > 06/05/06 10:00 PM > > A arnaud.quette@mgeups.com > > cc > > > Objet Fentonups driver - FreeBSD 6.x > > > > > > > > Dear Sir, > > My name is Stefanos Sofroniou and I have sent you another email long time ago > regards to my UPS. My UPS is UPSilon2000 and for some reason fentonups driver > does not support it. I have tried various drivers with negative results. > > This is what i get from it: > > $ /usr/local/libexec/nut/upsdrvctl start > Network UPS Tools - UPS driver controller 2.0.3 > Network UPS Tools - Fenton UPS driver 1.22 (2.0.3) > Unknown ups - please report this ID string: #ON-LINE 1000VA > H10R333 > Detected Unknown 000VA on /dev/cuad0 > $ > > I have changed permissions, onwer(s), created new group. I have tried > everything i know. I have red all mail list from 2005 until present. No one > has answered / replied to me since May you forwarded my email to mail list. I > need your help to solve my problem. I can't have my server shutdown because > here in my area we have every now and then power failure issue. Most of the > times that this issue's happening I am not home and fortunately previously > that I was using Windows i had the Windows program enable controlling server. > Now that I have a FreeBSD dedicated server I cannot go back to Microsoft just > for UPS usage. > I am sure that you can do something about it. I can't anything else, I have > tried everything. > I hope you can do something about it. > > Thank you very much > > Stefanos Sofroniou-- Carlos Rodrigues
On 6/6/06, Stefanos Sofroniou <ssofroni@cytanet.com.cy> wrote:> Thank you for your reply. It really means a lot to me. I have tried powermust > driver and this is the message: > > $ /usr/local/libexec/nut/upsdrvctl start > Network UPS Tools - UPS driver controller 2.0.3 > Network UPS Tools - Mustek PowerMust UPS driver 1.1 (2.0.3) > Carlos Rodrigues (c) 2003, 2004 > > Mustek PowerMust UPS, or compatible, detected.This looks ok. It should work then. After doing an "upsc yourups@localhost" check the "battery.charge" to see if it looks ok. If it doesn't, I'll need some extra information to fix it (that is just cosmetic though, it won't stop the driver from working as it should).> Shouldn't I see something like this example message? : > > # /usr/local/libexec/nut/upsdrvctl start > Network UPS Tools - UPS driver controller 1.5.12 > Network UPS Tools - Belkin Smart protocol driver 0.21 (1.5.12) > Detected F6C525-SER on /dev/cuaa0 > > I red that from installation manual and I was wondering if it's ok I haven't > seen anything like that.Those messages are printed by the driver itself, so they differ from driver to driver.> Also I have installed the latest port version which is 2.0.3 plus this is the > only available FreeBSD version that exists. > If I am missing something here please let me know about it. > > Thank you very much > Stefanos Sofroniou > > > On Tuesday 06 June 2006 14:50, you wrote: > > Like Arnaud said, "megatec" is only available on the development > > branch, but have you tried "powermust" on the stable release? > > > > If "powermust" doesn't work and you're willing to try the development > > branch, try running "megatec" like this "megatec -DDD -a yourups" and > > sending me the output. > > > > On 6/6/06, Arnaud QUETTE <Arnaud.QUETTE@mgeups.com> wrote: > > > Hi Stefanos, > > > > > > you should mail to the NUT list, and try the megatec driver, which is > > > only available from subversion for the moment (but should be included in > > > the next stable release). > > > > > > Carlos might give you some help with this driver. > > > > > > Stefanos Sofroniou <ssofroni@cytanet.com.cy> > > > > > > 06/05/06 10:00 PM > > > > > > A arnaud.quette@mgeups.com > > > > > > cc > > > > > > > > > Objet Fentonups driver - FreeBSD 6.x > > > > > > > > > > > > > > > > > > > > > > > > Dear Sir, > > > > > > My name is Stefanos Sofroniou and I have sent you another email long > > > time ago regards to my UPS. My UPS is UPSilon2000 and for some reason > > > fentonups driver does not support it. I have tried various drivers with > > > negative results. > > > > > > This is what i get from it: > > > > > > $ /usr/local/libexec/nut/upsdrvctl start > > > Network UPS Tools - UPS driver controller 2.0.3 > > > Network UPS Tools - Fenton UPS driver 1.22 (2.0.3) > > > Unknown ups - please report this ID string: #ON-LINE 1000VA > > > H10R333 > > > Detected Unknown 000VA on /dev/cuad0 > > > $ > > > > > > I have changed permissions, onwer(s), created new group. I have tried > > > everything i know. I have red all mail list from 2005 until present. No > > > one has answered / replied to me since May you forwarded my email to mail > > > list. I need your help to solve my problem. I can't have my server > > > shutdown because here in my area we have every now and then power failure > > > issue. Most of the times that this issue's happening I am not home and > > > fortunately previously that I was using Windows i had the Windows program > > > enable controlling server. Now that I have a FreeBSD dedicated server I > > > cannot go back to Microsoft just for UPS usage. > > > I am sure that you can do something about it. I can't anything else, I > > > have tried everything. > > > I hope you can do something about it. > > > > > > Thank you very much > > > > > > Stefanos Sofroniou >-- Carlos Rodrigues