thr3ads.net - asterisk users - [Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues [Mar 2005]

If this information is useful, please help other people find it:
Share via:

James Bean

2005-Mar-10 21:59 UTC

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

Hi, I hope someone can help me with this....
 
Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed
Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2
 
System is located in Australia, so as technologies go, I believe it is twist on
the euro standard for the E1 signalling.
 
Here is the situation.
 
The TDA E1 card is set in cross over mode and I am using a functional standard
straight through cable (sorry don't know the technical term, panasonic
supplier gave me the cable premade with the card).
 
I have been systematically going through each and everyone of the span,
signalling, crossover/patch cable settings I could find to see what would work.
 
To start if i use crc4 at any time I got no sync at either card.
 
I am pretty sure I need to supply clock with the connection as the TDA E1 is
expecting to be plugged into Telco E1 link, but for testing I was trying every
combination.
 
If I use span=1,x,0,ccs,hdb3 where x =0,1,2 the sync light appears on the E100P
card but when i bring the TDA E1 card in service i get a sync error and a crap
load of Red Alerts for every channel and a
 
Mar 11 14:40:35 NOTICE[3910]: chan_zap.c:7395 pri_dchannel: PRI got event: No
more alarm (5) on Primary D-channel of span 1
Mar 11 14:40:35 WARNING[3910]: chan_zap.c:1931 pri_find_dchan: No D-channels
available!  Using Primary on channel anyway 16!

At this stage I was pulling hair thinking what the.... but since murphy's
law rules supreme i started thinking about other signalling types,  esf,b8zs is
definitely not going to work so I tried.....
 
span=1,x,0,cas,hdb3 and suddenly i get across the board green lights on the
E100P and the TDA E1, but once the sync actually completes I then get the same
red alert's on every channel including the above d-channel error.
 
cas,hdb3 seems to be the way to go, although not generally used by what i have
read on the net, but after sync it bombs out in asterisk, does anyone have any
clues of what I could try next.
 
I tried all instances swapping between pri_net and pri_cpe in the zapata.conf
 
Following is all the relevant (I think) config files.
 
[root@redhat root]# cat /etc/zaptel.conf
span=1,2,0,cas,hdb3
bchan=1-15,17-31
dchan=16
loadzone=au
defaultzone=au

[root@redhat root]# cat /etc/asterisk/zapata.conf
[channels]
context=default
musiconhold=default
switchtype=euroisdn
usecallerid=yes
cidsignalling=v23
cidstart=polarity
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=0.0
group=1
signalling=pri_net
overlapdial=yes
context=internal
callerid=asreceived
channel=>1-15, 17-31

After each change i reloaded the zaptel and wct1xxp modules and did a ztcfg -vv
to confirm the change before restarting asterisk.
 
James
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 6012 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20050310/a2348b26/attachment.bin

Peter Svensson

2005-Mar-11 00:31 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

On Fri, 11 Mar 2005, James Bean wrote:
> Hi, I hope someone can help me with this....
>  
> Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed
> Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2
>  
> System is located in Australia, so as technologies go, I believe it is
> twist on the euro standard for the E1 signalling.
Is the E1 card an isdn card or something else? There are a several
signalling systems that can run over an E1.
> If I use span=1,x,0,ccs,hdb3 where x =0,1,2 the sync light appears on
> the E100P card but when i bring the TDA E1 card in service i get a sync
> error and a crap load of Red Alerts for every channel and a
>
> Mar 11 14:40:35 NOTICE[3910]: chan_zap.c:7395 pri_dchannel: PRI got event:
No more alarm (5) on Primary D-channel of span 1
> Mar 11 14:40:35 WARNING[3910]: chan_zap.c:1931 pri_find_dchan: No
D-channels available!  Using Primary on channel anyway 16!
>
> At this stage I was pulling hair thinking what the.... but since
> murphy's law rules supreme i started thinking about other signalling
> types, esf,b8zs is definitely not going to work so I tried.....
>
> span=1,x,0,cas,hdb3 and suddenly i get across the board green lights on
> the E100P and the TDA E1, but once the sync actually completes I then
> get the same red alert's on every channel including the above d-channel
> error.
When running cas you do not have a D channel for the signalling. Instead 
each voice channel has a few dedicated bits in channel 16 (hence Channel 
Associated Signalling). This is used for E&M, loopstart etc and is 
incompatible with the ISDN signalling that you tried.
> cas,hdb3 seems to be the way to go, although not generally used by what
> i have read on the net, but after sync it bombs out in asterisk, does
> anyone have any clues of what I could try next.
>
> I tried all instances swapping between pri_net and pri_cpe in the
> zapata.conf
You need to tell us more about what card you have in the Panasonic PBX.

Peter

James Bean

2005-Mar-11 01:46 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

>Is the E1 card an isdn card or something else? There are a severalsignalling systems that can run over an E1.
>When running cas you do not have a D channel for the signalling.
Instead each voice channel has a few dedicated >bits in channel 16 (hence Channel Associated Signalling). This is used
for E&M, loopstart etc and is incompatible >with the ISDN signalling that you tried.
>You need to tell us more about what card you have in the Panasonic PBX.
Ok not exactly sure what info to give you, I ordered an E1 card from
panasonic for the phone system and its what they sent me, it has an RJ45
interface and coax TX/RX connectors as well, I also have full access
with the "techs" version of the panasonic control/programming software
and know my way around if there is something specific I could get out of
the settings on the card for you to allow you to know which card it is.
I would "assume" (I know that's bad) that it is an ISDN card as it
should be the card that is used to connect to a telco directly.

I know that it is using hdb3, it only shows up with 30 channels on the
card in the E1 slot setup.

What happens to channel 16 which is usually set as the d-channel, or
should I be including channel 16 in with the rest and not using port 31
in the channels?

James

James Bean

2005-Mar-11 03:01 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

>Well, you can connect to the telco using non-isdn signalling as well.
In Europe isdn is by far >the most common signalling form used on an E1. Can you find the modelnumber for the E1 card?
>An E1 always has 30 voice channels, one signalling channel (running CAS
or>CCS) and one timing channel. (Well, you _can_ run voice over channel
16, but then you >would not have any signalling as RBS is not normally used on an E1).
>Channles 16 on an E1 is always reserved for signalling. There are
several signalling mechanisms >which can be transported in that slot. Isdn uses CCS, but there are
other non-isdn signalling >systems that instead use a few bits per channel each frame, CAS.
>Can you send me the result of a "pri intense debug span X" from
asterisk? >Have asterisk set to be the clock source (the timing set to 0 in the
span>line) and configured as pri_net.
Attached is the pri dump from asterisk just bringing the E1 into service
with the settings you suggested.

James
-------------- next part --------------
*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
*CLI> Sending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataMar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 1: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 1
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 2: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 2
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 3: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 3
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 4: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 4
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 5: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 5
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 6: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 6
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 7: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 7
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 8: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 8
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 9: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 9
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 10: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 10
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 11: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 11
Mar 11 19:50:19 NOTICE[7051]: chan_zap.c:7395 pri_dchannel: PRI got event: Alarm
(4) on Primary D-channel of span 1
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1931 pri_find_dchan: No D-channels
available!  Using Primary on channel anyway 16!
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 12: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 12
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 13: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 13
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 14: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 14
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 15: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 15
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 17: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 17
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 18: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 18
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 19: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 19
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 20: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 20
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 21: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 21
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 22: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 22
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 23: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 23
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 24: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 24
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 25: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 25
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 26: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 26
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 27: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 27
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 28: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 28
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 29: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 29
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 30: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 30
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 31: Red Alarm
Mar 11 19:50:19 WARNING[7051]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 31
Sending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 00 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous BalanMar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648
handle_init_event: Alarm cleared on channel 1
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 2
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 3
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 4
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 5
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 6
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 7
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 8
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 9
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 10
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 11
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 12
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 13
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 14
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 15
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 17
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 18
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 19
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 20
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 21
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 22
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 23
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 24
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 25
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 26
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 27
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 28
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 29
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 30
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 31
Mar 11 19:50:32 NOTICE[7051]: chan_zap.c:7395 pri_dchannel: PRI got event: No
more alarm (5) on Primary D-channel of span 1
Mar 11 19:50:32 WARNING[7051]: chan_zap.c:1931 pri_find_dchan: No D-channels
available!  Using Primary on channel anyway 16!

James Bean

2005-Mar-11 03:05 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

Whooppss had pri_cpe set, redid the debug as attached.

They seem the same but just in case.

James
-------------- next part --------------
Enabled EXTENSIVE debugging on span 1
*CLI> Sending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataMar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 1: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 1
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 2: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 2
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 3: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 3
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 4: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 4
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 5: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 5
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 6: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 6
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 7: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 7
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 8: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 8
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 9: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 9
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 10: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 10
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 11: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 11
Mar 11 19:58:13 NOTICE[7151]: chan_zap.c:7395 pri_dchannel: PRI got event: Alarm
(4) on Primary D-channel of span 1
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1931 pri_find_dchan: No D-channels
available!  Using Primary on channel anyway 16!
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 12: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 12
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 13: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 13
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 14: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 14
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 15: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 15
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 17: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 17
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 18: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 18
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 19: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 19
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 20: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 20
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 21: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 21
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 22: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 22
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 23: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 23
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 24: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 24
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 25: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 25
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 26: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 26
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 27: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 27
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 28: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 28
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 29: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 29
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 30: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 30
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:5653 handle_init_event: Detected alarm
on channel 31: Red Alarm
Mar 11 19:58:13 WARNING[7151]: chan_zap.c:1254 zt_disable_ec: Unable to disable
echo cancellation on channel 31
Sending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous Balanced Mode Extended
> [ 02 01 7f ]
> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of dataSending Set Asynchronous BalanMar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648
handle_init_event: Alarm cleared on channel 1
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 2
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 3
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 4
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 5
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 6
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 7
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 8
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 9
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 10
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 11
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 12
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 13
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 14
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 15
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 17
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 18
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 19
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 20
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 21
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 22
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 23
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 24
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 25
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:7395 pri_dchannel: PRI got event: No
more alarm (5) on Primary D-channel of span 1
Mar 11 19:58:26 WARNING[7151]: chan_zap.c:1931 pri_find_dchan: No D-channels
available!  Using Primary on channel anyway 16!
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 26
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 27
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 28
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 29
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 30
Mar 11 19:58:26 NOTICE[7151]: chan_zap.c:5648 handle_init_event: Alarm cleared
on channel 31

Peter Svensson

2005-Mar-11 06:25 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

On Fri, 11 Mar 2005, James Bean wrote:
> Whooppss had pri_cpe set, redid the debug as attached.
> 
> They seem the same but just in case.
Asterisk does not see anything coming in on the D channel. What does 
zttool say about the state of the link?

As I said before, if the card is an isdn card you need to use ccs 
signalling. Cas signalling is unusual, but possible, over an E1. Can you 
find out the model number of the E1 card in the Panasonic pbx?

Peter

James Bean

2005-Mar-11 23:51 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

>Asterisk does not see anything coming in on the D channel. What doeszttool say about the state of the link?

zttool shows the card exists, the following information shows when
select the card

Main Screen - Alarms Ok / Span Digium Wildcard E100P E1/PRA Card 0

Current Alarms: No Alarms
Sync Source: Internally clocked
IRQ Misses: 48
Bipolar Viol: 0
Tx/Rx Levels: 0/0
Total/Conf/ActL 31/31/0

Then a whole lot of numbers in a row with columns of TxA TxB etc with
dashes covering all lines.

[root@redhat root]# cat /proc/interrupts
           CPU0
  0:  101341836          XT-PIC  timer
  1:        526          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  3:   15425613          XT-PIC  eth0
  5:  101742446          XT-PIC  t1xxp
  7:   18724522          XT-PIC  eth1
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 11:     393426          XT-PIC  3ware Storage Controller, ohci1394
 12:         85          XT-PIC  i8042
NMI:          0
ERR:          0
>As I said before, if the card is an isdn card you need to use ccs
signalling. >Cas signalling is unusual, but possible, over an E1. Can you find out
the model >number of the E1 card in the Panasonic pbx?
When I use cas signalling on the * server the E1 card on the TDA shows a
green sync light, when on ccs it show sync error.

Ok there was a long string of numbers on the E1 card starting right to
left at the top of the card....

E1 PRI23 PRI30 PSUP1431ZB KX-TDA0187/0188/0290/0290CE

I believe the model number is a KX-TDA0290 or the 0290CE, as the 0187 is
a T1 Trunk card but we don't have T1 in australia it is E1.

I hope this is the answer to your questions sir, or did I create more?

James

Alex Ternero

2005-Aug-04 14:20 UTC

head link

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

Hi


I get a Connection between Asterisk and E1 PRi Card on TDA200 Panasonic pbx.

The connection is:

Asterisk ---> Panasonic TDA200-------> Telephony Provider E1 PRI
>From Ip Phones connected :1. We can make call to any extensions
2. We can make call to Public phone service, any number, Cellular,
intenational calls,etc.

The problem is :
>From Panasonic canot make calls to Ip PHoNE.
I execute Pri debug span 1.

And i dont see any connection , when , a call is make from Panasonic
estensions.

The people of Panasonic said to mee , they don t have dialtone from
asterisk, to make a call.

Some one get the connection works , ASTERISK--PANASONIC TDA200, culd you
send me your zapata.conf , and zaptel.conf files.????



Thanks

Alex Ternero



                       Insert a catchy tag line here

                        Alex Ternero H.
                        Gerente Tecnico  Winet Peru
                        Antequera 777 Piso 10
                        alext@wi-net.net  tel:
                              fax:
                              mobile:  511-2228000
                              511-2228000
                              511-97522329




            Add me to your address book... Want a signature like this?


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050805/2e7ba94e/attachment.htm

Maybe Matching Threads

Search for more possibly parallel threads

asterisk users - Mar 2005 - Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

[Asterisk-Users] Panasonic TDA200 E1 -> E100P negotiation issues

Maybe Matching Threads