I've got a couple of PRIs coming in from a SUMA 4 switch with some 800 numbers routed through it. When the calls come in, I get the following message on the console and the call never makes it through: (800 number is fake) Extension '8005551212' in context 'nonauthenticated' from '232102749585' does not exist. Rejecting the call on span 4, channel 1. I do have the following line in extensions.conf in [nonauthenticated] exten => 8005551212,1,AGI,ivr-main.pl
check 'show dialplan nonauthenticated' regards Martin On Fri, 21 Nov 2003, James Sharp wrote:> I've got a couple of PRIs coming in from a SUMA 4 switch with some 800 > numbers routed through it. > > When the calls come in, I get the following message on the console and the > call never makes it through: > > (800 number is fake) > > Extension '8005551212' in context 'nonauthenticated' from '232102749585' > does not exist. Rejecting the call on span 4, channel 1. > > I do have the following line in extensions.conf in [nonauthenticated] > > exten => 8005551212,1,AGI,ivr-main.pl > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
Hi! Today I had problems with an E1 link to a Siemens PBX (Sangoma 2xE1 card). Although everything looked fine (wanrouter status "connected", pri show status was also fine) there were no messages from the PBX to Asterisk. The log file is below. I reloaded asterisk and the kernel module several times - disconnect and reconnected the cables but nothing worked. Finally I rebootet the server and than everything was fine again. Does someone knows the reason for this problem? thanks klaus 12:23:58 == Primary D-Channel on span 1 up 12:24:00 == Primary D-Channel on span 1 up 12:24:01 == Primary D-Channel on span 1 up 12:24:02 == Primary D-Channel on span 1 up 12:24:02 -- B-channel 0/5 successfully restarted on span 2 12:24:03 == Primary D-Channel on span 1 up 12:24:05 < [ 00 01 7f ] 12:24:05 < Unnumbered frame: 12:24:05 < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 12:24:05 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] < 0 bytes of data 12:24:05 -- Got SABME from cpe peer. 12:24:05 Sending Unnumbered Acknowledgement 12:24:05 > [ 00 01 73 ] 12:24:05 > Unnumbered frame: 12:24:05 > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 12:24:05 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] > 0 bytes of data 12:24:05 -- Restarting T203 counter 12:24:05 -- Restarting T203 counter 12:24:05 == Primary D-Channel on span 1 up 12:24:06 < [ 00 01 7f ] 12:24:06 < Unnumbered frame: 12:24:06 < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 12:24:06 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] < 0 bytes of data 12:24:06 -- Got SABME from cpe peer. 12:24:06 Sending Unnumbered Acknowledgement 12:24:06 > [ 00 01 73 ] 12:24:06 > Unnumbered frame: 12:24:06 > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 12:24:06 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] > 0 bytes of data 12:24:06 -- Restarting T203 counter 12:24:06 -- Restarting T203 counter 12:24:06 == Primary D-Channel on span 1 up
Hi Klaus, may sound stoopid but...we had a similar problem then we discover the cable we made had wrong pinout..and asterisk gave me no messages. Hope may help. ::) Giorgio Incantalupo Klaus Darilion wrote:> Hi! > > Today I had problems with an E1 link to a Siemens PBX (Sangoma 2xE1 > card). Although everything looked fine (wanrouter status "connected", > pri show status was also fine) there were no messages from the PBX to > Asterisk. > > The log file is below. I reloaded asterisk and the kernel module > several times - disconnect and reconnected the cables but nothing > worked. Finally I rebootet the server and than everything was fine again. > > Does someone knows the reason for this problem? > > thanks > klaus > > 12:23:58 == Primary D-Channel on span 1 up > 12:24:00 == Primary D-Channel on span 1 up > 12:24:01 == Primary D-Channel on span 1 up > 12:24:02 == Primary D-Channel on span 1 up > 12:24:02 -- B-channel 0/5 successfully restarted on span 2 > 12:24:03 == Primary D-Channel on span 1 up > 12:24:05 < [ 00 01 7f ] > 12:24:05 < Unnumbered frame: > 12:24:05 < SAPI: 00 C/R: 0 EA: 0 > < TEI: 000 EA: 1 > 12:24:05 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous > balanced mode extended) ] > < 0 bytes of data > 12:24:05 -- Got SABME from cpe peer. > 12:24:05 Sending Unnumbered Acknowledgement > 12:24:05 > [ 00 01 73 ] > 12:24:05 > Unnumbered frame: > 12:24:05 > SAPI: 00 C/R: 0 EA: 0 > > TEI: 000 EA: 1 > 12:24:05 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered > acknowledgement) ] > > 0 bytes of data > 12:24:05 -- Restarting T203 counter > 12:24:05 -- Restarting T203 counter > 12:24:05 == Primary D-Channel on span 1 up > 12:24:06 < [ 00 01 7f ] > 12:24:06 < Unnumbered frame: > 12:24:06 < SAPI: 00 C/R: 0 EA: 0 > < TEI: 000 EA: 1 > 12:24:06 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous > balanced mode extended) ] > < 0 bytes of data > 12:24:06 -- Got SABME from cpe peer. > 12:24:06 Sending Unnumbered Acknowledgement > 12:24:06 > [ 00 01 73 ] > 12:24:06 > Unnumbered frame: > 12:24:06 > SAPI: 00 C/R: 0 EA: 0 > > TEI: 000 EA: 1 > 12:24:06 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered > acknowledgement) ] > > 0 bytes of data > 12:24:06 -- Restarting T203 counter > 12:24:06 -- Restarting T203 counter > 12:24:06 == Primary D-Channel on span 1 up > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >