Hi All,
I am using Ubuntu 12.04 as Dom0, with two interface eth0 and eth1.
in my previous setup i was using 3 separate sub interface with
VLAN(eth0.13,eth1.14,eth2.15) and connected to 3 bridges it worked fine but
current server doesn't have 3 interface to create 3 sub interface.
trying
to configure 3 VLANS on two interfaces and create 3 bonds for each VLAN and
add to 3 separate Linux bridges .
*Will this kind of setup work? ie without creating sub interfaces and
adding tag directly on bond and connecting that bond to bridge*
eth0 and eth1 bonded to bond13.*13* > then to bridge br0
eth0 and eth1 bonded to bond14.*14* > then to bridge br1
eth0 and eth1 bonded to bond 15.*15* > then to bridge br2
*or *
do i need to create sub interface and connect sub interface instead of eth0
and eth1
eth0.*13* eth1.*13* bonded to bond13 then bond13 to bridge 0
I heard that if i use eth0 directly with Bridge for VLAN traffic it does
not work and i need to use ebtables to make it work.Can some one please
help me with this?
Which method is the proper way to create multiple VLAN on single interface
and bridging it.
Thanks
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users