I am attempting to move debian Xen 4.0 installation to Alpine 2.7.5 hardware : HP DL165-G5 / 2x Opteron 22xxx / 32GB Ram uname -a: Linux jshvmhost1 3.10.33-0-grsec #1-Alpine SMP Fri Mar 7 14:24:31 UTC 2014 x86_64 Linux I have installed the system and go Xen up and running. Modified the PV xm files to use xl and got them up and running. Modified the first HVM xm file (WinXP Pro) but it is not running. (Black VNC screen ) So I attempted a new installation just to see if something was up and found that it boots to the CD the I get a message: "Setup is inspecting your computer's hardware configuration" And it hangs at that point. CPU utilization is at 100% When using a ubuntu-12.04-lts ISO the system hangs after the Language selection shows up. ----------------------------------- As a side note I attempted to "cat /proc/cpuinfo | grep svm" and it failed to find anything. However "xl dmesg" does..? I assume it is a "kernel thing" since the debian OS before it displayed it. What I don't know is if it is important :) I just wanted to air my concerns just in case.. ----------------------------------- Tried using local disk and ISO rather than ATAoE but nothing changed. ---------------------------------- Tried disabling grsec and got a change in the qemu-dm log. From the one line.. qemu: terminating on signal 1 from pid 11465 To the following... cat qemu-dm-irrigctrlview.log domid: 21 -videoram option does not work with cirrus vga device model. Videoram set to 4M. Using xvda for guest's hda Using file /dev/etherd/e400.18 in read-write mode Using xvdc for guest's hdc Using file /dev/etherd/e300.9 in read-only mode Watching /local/domain/0/device-model/21/logdirty/cmd Watching /local/domain/0/device-model/21/command Watching /local/domain/21/cpu qemu_map_cache_init nr_buckets = 10000 size 4194304 shared page at pfn feffd buffered io page at pfn feffb Guest uuid = 4083ea4a-b5ec-45fb-951b-43442a214472 populating video RAM at ff000000 mapping video RAM from ff000000 Register xen platform. Done register platform. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. xs_read(/local/domain/0/device-model/21/xen_extended_power_mgmt): read error xs_read(): vncpasswd get error. /vm/4083ea4a-b5ec-45fb-951b-43442a214472/vncpasswd. Using xvdc for guest's hdc medium change watch on `xvdc' (index: 1): /dev/etherd/e300.9 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 Log-dirty: no command yet. vcpu-set: watch node error. [xenstore_process_vcpu_set_event]: /local/domain/21/cpu has no CPU! xs_read(/local/domain/21/log-throttling): read error qemu: ignoring not-understood drive `/local/domain/21/log-throttling' medium change watch on `/local/domain/21/log-throttling' - unknown device, ignored cirrus vga map change while on lfb mode mapping vram to f0000000 - f0400000 platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state. Unfortunately I cannot tell if anything above is a real show stopper. Here is the latest configuration I have tried. Any suggestions would be appreciated. -------------- Start irrview.cfg ------------------ builder="hvm" #bootloader="pygrub" name = "irrigctrlview" memory = 1024 vcpus = 1 #pae = 1 acpi = 1 #apic = 1 vif = [ 'ip=192.168.8.38, mac=00:16:3E:1C:83:81, bridge=br0'] disk = [ 'phy:/dev/etherd/e400.18,xvda,w', 'phy:/dev/etherd/e300.1,xvdc:cdrom,r' ] boot="dc" usbdevice="tablet" ######################## This does not work # #sdl=0 #vnc=1 vnclisten='0.0.0.0' vncdisplay=12 #vncpasswd='' ####################### This does not work # #### This gets us the "vnc=1" #vfb=["vnc=1,vnclisten=0.0.0.0,vncdisplay=12,vncpasswd='',sdl=0"] vfb=["vnc=1"] # We need (Outside of vfb directive) # 1) vnclisten='0.0.0.0' # 2) vncdisplay=12 # We need (Inside the vfb directive) # 1) vnc=1 xen_platform_pci = 1 -- Doug Breshears JSH Farms Inc. 541-571-3332 _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users