unsubscribe
--
Gabriel Queiroz
+55 61 3037-2002
gabriel@flowecommerce.com (mailto:gabriel@flowecommerce.com)
www.flowecommerce.com (http://www.flowecommerce.com/)
On Wednesday, February 5, 2014 at 14:35, xen-users-request@lists.xen.org wrote:
> Send Xen-users mailing list submissions to
> xen-users@lists.xen.org (mailto:xen-users@lists.xen.org)
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.xen.org/cgi-bin/mailman/listinfo/xen-users
> or, via email, send a message with subject or body 'help' to
> xen-users-request@lists.xen.org (mailto:xen-users-request@lists.xen.org)
>
> You can reach the person managing the list at
> xen-users-owner@lists.xen.org (mailto:xen-users-owner@lists.xen.org)
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Xen-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
> don't own device (Mike Neiderhauser)
> 2. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
> don't own device (Mike Neiderhauser)
> 3. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
> don't own device (Mike Neiderhauser)
> 4. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
> don't own device (Mike Neiderhauser)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 5 Feb 2014 08:09:12 -0500
> From: Mike Neiderhauser <mikeneiderhauser@gmail.com
(mailto:mikeneiderhauser@gmail.com)>
> To: Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>
> Cc: xen-users <xen-users@lists.xen.org
(mailto:xen-users@lists.xen.org)>
> Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
> pci-stub don't own device
> Message-ID:
> <CA+XTOOiU_FXCsqU_=rixQmPqoKkt4eBRbiu2LU1CgrhMET2bKg@mail.gmail.com
(mailto:rixQmPqoKkt4eBRbiu2LU1CgrhMET2bKg@mail.gmail.com)>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Sorry about dropping the CC. I will try not to do it again.
>
> Which logs are you looking for?
>
> I have already started installing Ubuntu on the machine so anything that
> was from the 4.1 config has been deleted (I have a system image if I need
> to restore it to get additional information).
>
> Regards
>
>
> On Wed, Feb 5, 2014 at 7:52 AM, Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>wrote:
>
> > You've dropped the list CC, please don't do that. I've put
it back.
> >
> > On Wed, 2014-02-05 at 07:45 -0500, Mike Neiderhauser wrote:
> > > Looking at lshw on the machine shows that the device
configuration
> > > driver (after running the boot script) is pciback.
> > >
> >
> >
> > Anything in the logs?
> >
> >
> > > On another note, do you have any suggests for getting started
with Xen
> > > 4.3? I plan on using Ubuntu 13.10 as a base os and then
installing on
> > > there. Do I need to compile a custom kernel or anything?
> > >
> >
> >
> > I don't know much about Ubuntu, but in general it isn't
necessary to
> > compile a custom kernel these days, unless you run into a bug which
> > requires patching etc.
> >
> > Ian.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://lists.xen.org/archives/html/xen-users/attachments/20140205/94deedef/attachment.html>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 5 Feb 2014 08:43:48 -0500
> From: Mike Neiderhauser <mikeneiderhauser@gmail.com
(mailto:mikeneiderhauser@gmail.com)>
> To: Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>
> Cc: xen-users <xen-users@lists.xen.org
(mailto:xen-users@lists.xen.org)>
> Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
> pci-stub don't own device
> Message-ID:
> <CA+XTOOjk2QOqTdLdTFdFpcLMJRJH4UKo07Ybu9b6pJHp1-owAg@mail.gmail.com
(mailto:CA+XTOOjk2QOqTdLdTFdFpcLMJRJH4UKo07Ybu9b6pJHp1-owAg@mail.gmail.com)>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Do you have any suggestions for a setup guide for 4.3? I have installed
> xen-hypervisor-4.3-amd64 from ubuntu package manger and I don't know
where
> to go from here.
>
> Thanks
>
>
> On Wed, Feb 5, 2014 at 8:15 AM, Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>wrote:
>
> > On Wed, 2014-02-05 at 08:09 -0500, Mike Neiderhauser wrote:
> >
> > > Which logs are you looking for?
> >
> > "xm dmesg" (or xl dmesg) in addition to the dom0 kernel
dmesg. From a
> > previous reply:
> > Does it say anything extra after you try the final create with
> > 22
> > Invalid Argument as the result?
> >
> > Also you should look in "xm dmesg" (Xen's console) as
well as
> > "dmesg" (dom0's console)
> >
> > > I have already started installing Ubuntu on the machine so
anything
> > > that was from the 4.1 config has been deleted (I have a system
image
> > > if I need to restore it to get additional information).
> > >
> >
> >
> > It's OK, lets focus on the newer version.
> >
> >
> > Ian.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://lists.xen.org/archives/html/xen-users/attachments/20140205/56744dc6/attachment.html>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 5 Feb 2014 08:54:18 -0500
> From: Mike Neiderhauser <mikeneiderhauser@gmail.com
(mailto:mikeneiderhauser@gmail.com)>
> To: Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>
> Cc: xen-users <xen-users@lists.xen.org
(mailto:xen-users@lists.xen.org)>
> Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
> pci-stub don't own device
> Message-ID:
> <CA+XTOOgJkLDFpQMcEPm9GrpWi-vaOPoWhBLWMgb27x+k0nbmOg@mail.gmail.com
(mailto:CA+XTOOgJkLDFpQMcEPm9GrpWi-vaOPoWhBLWMgb27x+k0nbmOg@mail.gmail.com)>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have. But I cant seem to get the xm toolstack to switch with xl.
>
> Regards
>
>
> On Wed, Feb 5, 2014 at 8:53 AM, Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>wrote:
>
> > On Wed, 2014-02-05 at 08:43 -0500, Mike Neiderhauser wrote:
> > > Do you have any suggestions for a setup guide for 4.3? I have
> > > installed xen-hypervisor-4.3-amd64 from ubuntu package manger and
I
> > > don't know where to go from here.
> > >
> >
> >
> > Have you looked on the wiki?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://lists.xen.org/archives/html/xen-users/attachments/20140205/b2b11b69/attachment.html>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 5 Feb 2014 10:00:00 -0500
> From: Mike Neiderhauser <mikeneiderhauser@gmail.com
(mailto:mikeneiderhauser@gmail.com)>
> To: Ian Campbell <Ian.Campbell@citrix.com
(mailto:Ian.Campbell@citrix.com)>
> Cc: xen-users <xen-users@lists.xen.org
(mailto:xen-users@lists.xen.org)>
> Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
> pci-stub don't own device
> Message-ID:
> <CA+XTOOh21uL7PBYL9Q-VAX3vZ_iz3eimeRWU-7Gq2S43dqfz-w@mail.gmail.com
(mailto:CA+XTOOh21uL7PBYL9Q-VAX3vZ_iz3eimeRWU-7Gq2S43dqfz-w@mail.gmail.com)>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Okay. I was able to switch over the toolstack to xl.
>
> When trying to create the domu I get this:
>
> root@fiat:~# xl create /etc/xen/ubuntu-hvm-0.cfg
> Parsing config from /etc/xen/ubuntu-hvm-0.cfg
> WARNING: ignoring "kernel" directive for HVM guest. Use
"firmware_override"
> instead if you really want a non-default firmware
> WARNING: ignoring device_model directive.
> WARNING: Use "device_model_override" instead if you really want a
> non-default device_model
> xc: info: VIRTUAL MEMORY ARRANGEMENT:
> Loader: 0000000000100000->00000000001a69a4
> Modules: 0000000000000000->0000000000000000
> TOTAL: 0000000000000000->000000003f800000
> ENTRY ADDRESS: 0000000000100608
> xc: info: PHYSICAL MEMORY ALLOCATION:
> 4KB PAGES: 0x0000000000000200
> 2MB PAGES: 0x00000000000001fb
> 1GB PAGES: 0x0000000000000000
> libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel
doesn't
> support reset from sysfs for PCI device 0000:05:00.0
> libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel
doesn't
> support reset from sysfs for PCI device 0000:05:00.1
> Daemon running with PID 3095
>
>
> xl dmesg
> root@fiat:~# xl dmesg
> (XEN) Xen version 4.3.0 (Ubuntu 4.3.0-1ubuntu1.2) (
> stefan.bader@canonical.com (mailto:stefan.bader@canonical.com)) (gcc
(Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1)
> debug=n Tue Dec 17 15:35:25 UTC 2013
> (XEN) Bootloader: GRUB 2.00-19ubuntu2.1
> (XEN) Command line: placeholder dom0_mem=1024M
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009e400 (usable)
> (XEN) 000000000009e400 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000bdfb0000 (usable)
> (XEN) 00000000bdfb0000 - 00000000bf3b0000 (reserved)
> (XEN) 00000000bf3b0000 - 00000000bf5d7000 (usable)
> (XEN) 00000000bf5d7000 - 00000000bf5d9000 (reserved)
> (XEN) 00000000bf5d9000 - 00000000bf5ea000 (usable)
> (XEN) 00000000bf5ea000 - 00000000bf5ee000 (reserved)
> (XEN) 00000000bf5ee000 - 00000000bf5f0000 (usable)
> (XEN) 00000000bf5f0000 - 00000000bf601000 (reserved)
> (XEN) 00000000bf601000 - 00000000bf63f000 (usable)
> (XEN) 00000000bf63f000 - 00000000bf6bf000 (reserved)
> (XEN) 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS)
> (XEN) 00000000bf7bf000 - 00000000bf7f0000 (ACPI data)
> (XEN) 00000000bf7f0000 - 00000000bf800000 (usable)
> (XEN) 00000000bf800000 - 00000000c0000000 (reserved)
> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
> (XEN) 00000000feb00000 - 00000000feb04000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec01000 (reserved)
> (XEN) 00000000fed10000 - 00000000fed1a000 (reserved)
> (XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
> (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
> (XEN) 00000000ffc00000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000140000000 (usable)
> (XEN) ACPI: RSDP 000FE020, 0024 (r2 DELL )
> (XEN) ACPI: XSDT BF7EF170, 00A4 (r1 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: FACP BF7EB000, 00F4 (r4 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: DSDT BF7E1000, 68FE (r1 DELL PE_SC3 0 DELL 40000)
> (XEN) ACPI: FACS BF7B8000, 0040
> (XEN) ACPI: SPMI BF7EE000, 0040 (r5 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: DMAR BF7ED000, 0078 (r1 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: ASF! BF7EC000, 00A5 (r32 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: HPET BF7EA000, 0038 (r1 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: APIC BF7E9000, 0092 (r2 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: MCFG BF7E8000, 003C (r1 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: BOOT BF7DE000, 0028 (r1 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: SSDT BF7DD000, 02F6 (r1 DELL PE_SC3 1000 DELL 40000)
> (XEN) ACPI: ASPT BF7DA000, 0034 (r7 DELL PE_SC3 1 DELL 40000)
> (XEN) ACPI: SSDT BF7D9000, 060E (r1 DELL PE_SC3 3000 DELL 40000)
> (XEN) ACPI: SSDT BF7D8000, 0A92 (r1 DELL PE_SC3 3000 DELL 40000)
> (XEN) ACPI: HEST BF7D7000, 00A8 (r1 DELL PE_SC3 0 DELL 40000)
> (XEN) ACPI: ERST BF7D6000, 0230 (r1 DELL PE_SC3 0 DELL 40000)
> (XEN) ACPI: BERT BF7D5000, 0030 (r1 DELL PE_SC3 0 DELL 40000)
> (XEN) ACPI: EINJ BF7D4000, 0130 (r1 DELL PE_SC3 0 DELL 40000)
> (XEN) System RAM: 4065MB (4163416kB)
> (XEN) Domain heap initialised
> (XEN) Processor #0 6:10 APIC version 21
> (XEN) Processor #2 6:10 APIC version 21
> (XEN) Processor #4 6:10 APIC version 21
> (XEN) Processor #6 6:10 APIC version 21
> (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) [VT-D]dmar.c:583: RMRR address range not in reserved memory base >
0 end = fff; iommu_inclusive_mapping=1 parameter may be needed.
> (XEN) Switched to APIC driver x2apic_cluster.
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 3093.056 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
> (XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
> (XEN) Intel VT-d Snoop Control enabled.
> (XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
> (XEN) Intel VT-d Queued Invalidation enabled.
> (XEN) Intel VT-d Interrupt Remapping enabled.
> (XEN) Intel VT-d Shared EPT tables not enabled.
> (XEN) I/O virtualisation enabled
> (XEN) - Dom0 mode: Relaxed
> (XEN) Interrupt remapping enabled
> (XEN) Enabled directed EOI with ioapic_ack_old on!
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using old ACK method
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Allocated console ring of 16 KiB.
> (XEN) VMX: Supported advanced features:
> (XEN) - APIC MMIO access virtualisation
> (XEN) - APIC TPR shadow
> (XEN) - Extended Page Tables (EPT)
> (XEN) - Virtual-Processor Identifiers (VPID)
> (XEN) - Virtual NMI
> (XEN) - MSR direct-access bitmap
> (XEN) - Unrestricted Guest
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging (HAP) detected
> (XEN) HVM: HAP page sizes: 4kB, 2MB
> (XEN) Brought up 4 CPUs
> (XEN) mtrr: your CPUs had inconsistent variable MTRR settings
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x23f3000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000134000000->0000000138000000 (233686 pages to
> be allocated)
> (XEN) Init. ramdisk: 000000013d0d6000->000000013ffff800
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff81000000->ffffffff823f3000
> (XEN) Init. ramdisk: ffffffff823f3000->ffffffff8531c800
> (XEN) Phys-Mach map: ffffffff8531d000->ffffffff8551d000
> (XEN) Start info: ffffffff8551d000->ffffffff8551d4b4
> (XEN) Page tables: ffffffff8551e000->ffffffff8554d000
> (XEN) Boot stack: ffffffff8554d000->ffffffff8554e000
> (XEN) TOTAL: ffffffff80000000->ffffffff85800000
> (XEN) ENTRY ADDRESS: ffffffff81d261e0
> (XEN) Dom0 has maximum 4 VCPUs
> (XEN) Scrubbing Free RAM: .............................done.
> (XEN) Initial low memory virq threshold set at 0x4000 pages.
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to
switch input
> to Xen)
> (XEN) Freed 260kB init memory.
> (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
> 0x000000000004005f to 0x000000000004005d.
> (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
> 0x000000000004005f to 0x000000000004005d.
> (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
> 0x000000000004005f to 0x000000000004005d.
> (XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
> 0x000000000004005f to 0x000000000004005d.
>
>
> dmesg
> root@fiat:~# dmesg
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc
> version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9
> 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
> [ 0.000000] Command line: placeholder root=/dev/mapper/fiat--vg-root ro
> biosdevname=0
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed
> [ 0.000000] 1-1 mapping on 9e->100
> [ 0.000000] 1-1 mapping on bdfb0->bf3b0
> [ 0.000000] 1-1 mapping on bf5d7->bf5d9
> [ 0.000000] 1-1 mapping on bf5ea->bf5ee
> [ 0.000000] 1-1 mapping on bf5f0->bf601
> [ 0.000000] 1-1 mapping on bf63f->bf7f0
> [ 0.000000] 1-1 mapping on bf800->100000
> [ 0.000000] Released 98 pages of unused memory
> [ 0.000000] Set 269866 page(s) to 1-1 mapping
> [ 0.000000] Populating 40000-40062 pfn range: 98 pages added
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
> [ 0.000000] Xen: [mem 0x000000000009e400-0x00000000000fffff] reserved
> [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000bdfaffff] usable
> [ 0.000000] Xen: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved
> [ 0.000000] Xen: [mem 0x00000000bf3b0000-0x00000000bf5d6fff] usable
> [ 0.000000] Xen: [mem 0x00000000bf5d7000-0x00000000bf5d8fff] reserved
> [ 0.000000] Xen: [mem 0x00000000bf5d9000-0x00000000bf5e9fff] usable
> [ 0.000000] Xen: [mem 0x00000000bf5ea000-0x00000000bf5edfff] reserved
> [ 0.000000] Xen: [mem 0x00000000bf5ee000-0x00000000bf5effff] usable
> [ 0.000000] Xen: [mem 0x00000000bf5f0000-0x00000000bf600fff] reserved
> [ 0.000000] Xen: [mem 0x00000000bf601000-0x00000000bf63efff] usable
> [ 0.000000] Xen: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
> [ 0.000000] Xen: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
> [ 0.000000] Xen: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data
> [ 0.000000] Xen: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable
> [ 0.000000] Xen: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
> [ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
> [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
> [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] Xen: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
> [ 0.000000] Xen: [mem 0x0000000100000000-0x000000013fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: Dell Inc. PowerEdge R210 II/03X6X0, BIOS 2.5.1
> 07/11/2013
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
> [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x3fe00000-0x3fffffff]
> [ 0.000000] [mem 0x3fe00000-0x3fffffff] page 4k
> [ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3fdfffff]
> [ 0.000000] [mem 0x3c000000-0x3fdfffff] page 4k
> [ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
> [ 0.000000] BRK [0x01feb000, 0x01febfff] PGTABLE
> [ 0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE
> [ 0.000000] BRK [0x01fed000, 0x01fedfff] PGTABLE
> [ 0.000000] BRK [0x01fee000, 0x01feefff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
> [ 0.000000] [mem 0x00100000-0x3bffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x40000000-0xbdfaffff]
> [ 0.000000] [mem 0x40000000-0xbdfaffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbf3b0000-0xbf5d6fff]
> [ 0.000000] [mem 0xbf3b0000-0xbf5d6fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbf5d9000-0xbf5e9fff]
> [ 0.000000] [mem 0xbf5d9000-0xbf5e9fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbf5ee000-0xbf5effff]
> [ 0.000000] [mem 0xbf5ee000-0xbf5effff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbf601000-0xbf63efff]
> [ 0.000000] [mem 0xbf601000-0xbf63efff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xbf7f0000-0xbf7fffff]
> [ 0.000000] [mem 0xbf7f0000-0xbf7fffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
> [ 0.000000] [mem 0x100000000-0x13fffffff] page 4k
> [ 0.000000] RAMDISK: [mem 0x023f3000-0x0531cfff]
> [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 00000000bf7ef170 000A4 (v01 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: FACP 00000000bf7eb000 000F4 (v04 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: DSDT 00000000bf7e1000 068FE (v01 DELL PE_SC3
> 00000000 DELL 00040000)
> [ 0.000000] ACPI: FACS 00000000bf7b8000 00040
> [ 0.000000] ACPI: SPMI 00000000bf7ee000 00040 (v05 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: XMAR 00000000bf7ed000 00078 (v01 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: ASF! 00000000bf7ec000 000A5 (v32 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: HPET 00000000bf7ea000 00038 (v01 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: APIC 00000000bf7e9000 00092 (v02 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: MCFG 00000000bf7e8000 0003C (v01 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: BOOT 00000000bf7de000 00028 (v01 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: SSDT 00000000bf7dd000 002F6 (v01 DELL PE_SC3
> 00001000 DELL 00040000)
> [ 0.000000] ACPI: ASPT 00000000bf7da000 00034 (v07 DELL PE_SC3
> 00000001 DELL 00040000)
> [ 0.000000] ACPI: SSDT 00000000bf7d9000 0060E (v01 DELL PE_SC3
> 00003000 DELL 00040000)
> [ 0.000000] ACPI: SSDT 00000000bf7d8000 00A92 (v01 DELL PE_SC3
> 00003000 DELL 00040000)
> [ 0.000000] ACPI: HEST 00000000bf7d7000 000A8 (v01 DELL PE_SC3
> 00000000 DELL 00040000)
> [ 0.000000] ACPI: ERST 00000000bf7d6000 00230 (v01 DELL PE_SC3
> 00000000 DELL 00040000)
> [ 0.000000] ACPI: BERT 00000000bf7d5000 00030 (v01 DELL PE_SC3
> 00000000 DELL 00040000)
> [ 0.000000] ACPI: EINJ 00000000bf7d4000 00130 (v01 DELL PE_SC3
> 00000000 DELL 00040000)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] NUMA turned off
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
> [ 0.000000] NODE_DATA [mem 0x3f899000-0x3f89dfff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0xbdfaffff]
> [ 0.000000] node 0: [mem 0xbf3b0000-0xbf5d6fff]
> [ 0.000000] node 0: [mem 0xbf5d9000-0xbf5e9fff]
> [ 0.000000] node 0: [mem 0xbf5ee000-0xbf5effff]
> [ 0.000000] node 0: [mem 0xbf601000-0xbf63efff]
> [ 0.000000] node 0: [mem 0xbf7f0000-0xbf7fffff]
> [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
> [ 0.000000] On node 0 totalpages: 1040853
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 12105 pages used for memmap
> [ 0.000000] DMA32 zone: 774712 pages, LIFO batch:31
> [ 0.000000] Normal zone: 4096 pages used for memmap
> [ 0.000000] Normal zone: 262144 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbdfb0000-0xbf3affff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf5d7000-0xbf5d8fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf5ea000-0xbf5edfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf5f0000-0xbf600fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf63f000-0xbf6befff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7effff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
> [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on Xen
> [ 0.000000] Xen version: 4.3.0 (preserve-AD)
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8
> nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003f200000 s86720 r8192
> d23872 u262144
> [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 1.317175] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 1024567
> [ 1.317177] Policy zone: Normal
> [ 1.317178] Kernel command line: placeholder
> root=/dev/mapper/fiat--vg-root ro biosdevname=0
> [ 1.317577] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 1.317607] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 1.337841] software IO TLB [mem 0x37000000-0x3b000000] (64MB) mapped at
> [ffff880037000000-ffff88003affffff]
> [ 1.343109] Memory: 840760K/4163412K available (7141K kernel code, 1082K
> rwdata, 3260K rodata, 1364K init, 1420K bss, 3322652K reserved)
> [ 1.343171] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 1.343187] Hierarchical RCU implementation.
> [ 1.343188] RCU dyntick-idle grace-period acceleration is enabled.
> [ 1.343189] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
> [ 1.343190] Offload RCU callbacks from all CPUs
> [ 1.343193] Offload RCU callbacks from CPUs: 0-255.
> [ 1.343200] NR_IRQS:16640 nr_irqs:712 16
> [ 1.343257] xen: sci override: global_irq=9 trigger=0 polarity=0
> [ 1.343258] xen: registering gsi 9 triggering 0 polarity 0
> [ 1.343269] xen: --> pirq=9 -> irq=9 (gsi=9)
> [ 1.343288] xen: acpi sci 9
> [ 1.343291] xen: --> pirq=1 -> irq=1 (gsi=1)
> [ 1.343293] xen: --> pirq=2 -> irq=2 (gsi=2)
> [ 1.343297] xen: --> pirq=3 -> irq=3 (gsi=3)
> [ 1.343300] xen: --> pirq=4 -> irq=4 (gsi=4)
> [ 1.343302] xen: --> pirq=5 -> irq=5 (gsi=5)
> [ 1.343304] xen: --> pirq=6 -> irq=6 (gsi=6)
> [ 1.343306] xen: --> pirq=7 -> irq=7 (gsi=7)
> [ 1.343309] xen: --> pirq=8 -> irq=8 (gsi=8)
> [ 1.343311] xen: --> pirq=10 -> irq=10 (gsi=10)
> [ 1.343313] xen: --> pirq=11 -> irq=11 (gsi=11)
> [ 1.343316] xen: --> pirq=12 -> irq=12 (gsi=12)
> [ 1.343318] xen: --> pirq=13 -> irq=13 (gsi=13)
> [ 1.343321] xen: --> pirq=14 -> irq=14 (gsi=14)
> [ 1.343323] xen: --> pirq=15 -> irq=15 (gsi=15)
> [ 1.347861] Console: colour VGA+ 80x25
> [ 1.358167] console [tty0] enabled
> [ 1.360299] allocated 16777216 bytes of page_cgroup
> [ 1.360369] please try 'cgroup_disable=memory' option if you
don't want
> memory cgroups
> [ 1.360487] Xen: using vcpuop timer interface
> [ 1.360492] installing Xen timer for CPU 0
> [ 1.360579] tsc: Detected 3093.056 MHz processor
> [ 1.360646] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 6186.11 BogoMIPS (lpj=12372224)
> [ 1.360777] pid_max: default: 32768 minimum: 301
> [ 1.360867] Security Framework initialized
> [ 1.360946] AppArmor: AppArmor initialized
> [ 1.361009] Yama: becoming mindful.
> [ 1.361540] Dentry cache hash table entries: 524288 (order: 10, 4194304
> bytes)
> [ 1.362357] Inode-cache hash table entries: 262144 (order: 9, 2097152
> bytes)
> [ 1.362697] Mount-cache hash table entries: 256
> [ 1.362932] Initializing cgroup subsys memory
> [ 1.363003] Initializing cgroup subsys devices
> [ 1.363068] Initializing cgroup subsys freezer
> [ 1.363133] Initializing cgroup subsys blkio
> [ 1.364545] Initializing cgroup subsys perf_event
> [ 1.364610] Initializing cgroup subsys hugetlb
> [ 1.364739] ENERGY_PERF_BIAS: Set to 'normal', was
'performance'
> [ 1.364739] ENERGY_PERF_BIAS: View and update with
> x86_energy_perf_policy(8)
> [ 1.364834] CPU: Physical Processor ID: 0
> [ 1.364896] CPU: Processor Core ID: 0
> [ 1.364960] mce: CPU supports 2 MCE banks
> [ 1.365035] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> [ 1.365035] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> [ 1.365035] tlb_flushall_shift: 5
> [ 1.365227] Freeing SMP alternatives memory: 28K (ffffffff81e65000 -
> ffffffff81e6c000)
> [ 1.367286] ACPI: Core revision 20130517
> [ 1.370761] ACPI: All ACPI Tables successfully acquired
> [ 1.382180] ftrace: allocating 27796 entries in 109 pages
> [ 1.393056] cpu 0 spinlock event irq 41
> [ 1.393142] Performance Events: unsupported p6 CPU model 42 no PMU
> driver, software events only.
> [ 1.394402] NMI watchdog: disabled (cpu0): hardware events not enabled
> [ 1.394522] installing Xen timer for CPU 1
> [ 1.394591] cpu 1 spinlock event irq 48
> [ 1.394891] installing Xen timer for CPU 2
> [ 1.394959] cpu 2 spinlock event irq 55
> [ 1.395260] installing Xen timer for CPU 3
> [ 1.395327] cpu 3 spinlock event irq 62
> [ 1.395569] Brought up 4 CPUs
> [ 1.395926] devtmpfs: initialized
> [ 1.396704] EVM: security.selinux
> [ 1.396767] EVM: security.SMACK64
> [ 1.396830] EVM: security.capability
> [ 1.396941] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff]
> (1048576 bytes)
> [ 1.397621] xen:grant_table: Grant tables using version 2 layout
> [ 1.397696] Grant table initialized
> [ 1.397793] regulator-dummy: no parameters
> [ 1.397894] RTC time: 14:41:51, date: 02/05/14
> [ 1.397984] NET: Registered protocol family 16
> [ 1.398201] ACPI FADT declares the system doesn't support PCIe ASPM, so
> disable it
> [ 1.398286] ACPI: bus type PCI registered
> [ 1.398350] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 1.398510] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 1.398598] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [ 1.432711] PCI: Using configuration type 1 for base access
> [ 1.433538] bio: create slab <bio-0> at 0
> [ 1.433778] ACPI: Added _OSI(Module Device)
> [ 1.433842] ACPI: Added _OSI(Processor Device)
> [ 1.433906] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 1.433970] ACPI: Added _OSI(Processor Aggregator Device)
> [ 1.435216] ACPI: EC: Look up EC in DSDT
> [ 1.436350] ACPI: Executed 1 blocks of module-level executable AML code
> [ 1.438454] ACPI: SSDT 00000000bf64d018 0083B (v01 PmRef Cpu0Cst
> 00003001 INTL 20080729)
> [ 1.438904] ACPI: Dynamic OEM Table Load:
> [ 1.439048] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst
> 00003001 INTL 20080729)
> [ 1.443713] ACPI: SSDT 00000000bf64ea98 00303 (v01 PmRef ApIst
> 00003000 INTL 20080729)
> [ 1.444187] ACPI: Dynamic OEM Table Load:
> [ 1.444329] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
> 00003000 INTL 20080729)
> [ 1.447686] ACPI: SSDT 00000000bf64cd98 00119 (v01 PmRef ApCst
> 00003000 INTL 20080729)
> [ 1.448137] ACPI: Dynamic OEM Table Load:
> [ 1.448283] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
> 00003000 INTL 20080729)
> [ 1.452128] ACPI: Interpreter enabled
> [ 1.452195] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
> [\_S1_] (20130517/hwxface-571)
> [ 1.452363] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
> [\_S2_] (20130517/hwxface-571)
> [ 1.452532] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
> [\_S3_] (20130517/hwxface-571)
> [ 1.452707] ACPI: (supports S0 S4 S5)
> [ 1.452770] ACPI: Using IOAPIC for interrupt routing
> [ 1.452873] HEST: Table parsing has been initialized.
> [ 1.452939] PCI: Using host bridge windows from ACPI; if necessary, use
> "pci=nocrs" and report a bug
> [ 1.453111] ACPI: No dock devices found.
> [ 1.456960] ACPI: Power Resource [FN00] (off)
> [ 1.457089] ACPI: Power Resource [FN01] (off)
> [ 1.457214] ACPI: Power Resource [FN02] (off)
> [ 1.457337] ACPI: Power Resource [FN03] (off)
> [ 1.457461] ACPI: Power Resource [FN04] (off)
> [ 1.458079] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> [ 1.458287] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
> [ 1.458734] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
> [ 1.459314] PCI host bridge to bus 0000:00
> [ 1.459378] pci_bus 0000:00: root bus resource [bus 00-fe]
> [ 1.459443] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 1.459511] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 1.459577] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff]
> [ 1.459645] pci_bus 0000:00: root bus resource [mem
> 0xc0000000-0xfeafffff]
> [ 1.459723] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000
> [ 1.459852] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
> [ 1.459929] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 1.459971] pci 0000:00:01.0: System wakeup disabled by ACPI
> [ 1.460161] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> [ 1.460511] pci 0000:00:1a.0: reg 0x10: [mem 0xc5e06000-0xc5e063ff]
> [ 1.462352] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 1.462422] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 1.462534] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> [ 1.462707] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 1.462766] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 1.462897] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> [ 1.463216] pci 0000:00:1d.0: reg 0x10: [mem 0xc5e05000-0xc5e053ff]
> [ 1.465054] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 1.465119] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 1.465225] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> [ 1.465383] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 1.465489] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
> [ 1.465769] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
> [ 1.465815] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
> [ 1.465833] pci 0000:00:1f.2: reg 0x14: [io 0x4054-0x4057]
> [ 1.465850] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
> [ 1.465868] pci 0000:00:1f.2: reg 0x1c: [io 0x4050-0x4053]
> [ 1.465885] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
> [ 1.465903] pci 0000:00:1f.2: reg 0x24: [mem 0xc5e04000-0xc5e047ff]
> [ 1.466021] pci 0000:00:1f.2: PME# supported from D3hot
> [ 1.466114] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> [ 1.466148] pci 0000:00:1f.3: reg 0x10: [mem 0xc5e02000-0xc5e020ff 64bit]
> [ 1.466198] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
> [ 1.466379] pci 0000:01:00.0: [111d:8018] type 01 class 0x060400
> [ 1.466480] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
> [ 1.466506] pci 0000:01:00.0: System wakeup disabled by ACPI
> [ 1.474241] pci 0000:00:01.0: PCI bridge to [bus 01-04]
> [ 1.474311] pci 0000:00:01.0: bridge window [io 0x2000-0x3fff]
> [ 1.474315] pci 0000:00:01.0: bridge window [mem 0xc5400000-0xc5dfffff]
> [ 1.474401] pci 0000:02:02.0: [111d:8018] type 01 class 0x060400
> [ 1.474517] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
> [ 1.474587] pci 0000:02:04.0: [111d:8018] type 01 class 0x060400
> [ 1.474702] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
> [ 1.474789] pci 0000:01:00.0: PCI bridge to [bus 02-04]
> [ 1.474862] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
> [ 1.474867] pci 0000:01:00.0: bridge window [mem 0xc5400000-0xc5dfffff]
> [ 1.474964] pci 0000:03:00.0: [8086:10c9] type 00 class 0x020000
> [ 1.474985] pci 0000:03:00.0: reg 0x10: [mem 0xc5d20000-0xc5d3ffff]
> [ 1.475014] pci 0000:03:00.0: reg 0x18: [io 0x3020-0x303f]
> [ 1.475029] pci 0000:03:00.0: reg 0x1c: [mem 0xc5d44000-0xc5d47fff]
> [ 1.475153] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 1.475204] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.475230] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.475326] pci 0000:03:00.1: [8086:10c9] type 00 class 0x020000
> [ 1.475347] pci 0000:03:00.1: reg 0x10: [mem 0xc5d00000-0xc5d1ffff]
> [ 1.475376] pci 0000:03:00.1: reg 0x18: [io 0x3000-0x301f]
> [ 1.475391] pci 0000:03:00.1: reg 0x1c: [mem 0xc5d40000-0xc5d43fff]
> [ 1.475514] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
> [ 1.475565] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.475591] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.475688] pci 0000:02:02.0: PCI bridge to [bus 03]
> [ 1.475760] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
> [ 1.475765] pci 0000:02:02.0: bridge window [mem 0xc5d00000-0xc5dfffff]
> [ 1.475864] pci 0000:04:00.0: [8086:10e8] type 00 class 0x020000
> [ 1.475885] pci 0000:04:00.0: reg 0x10: [mem 0xc5c20000-0xc5c3ffff]
> [ 1.475900] pci 0000:04:00.0: reg 0x14: [mem 0xc5800000-0xc5bfffff]
> [ 1.475915] pci 0000:04:00.0: reg 0x18: [io 0x2020-0x203f]
> [ 1.475930] pci 0000:04:00.0: reg 0x1c: [mem 0xc5c44000-0xc5c47fff]
> [ 1.475973] pci 0000:04:00.0: reg 0x30: [mem 0xffc00000-0xffffffff pref]
> [ 1.476055] pci 0000:04:00.0: PME# supported from D0 D3hot
> [ 1.476107] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.476133] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.476231] pci 0000:04:00.1: [8086:10e8] type 00 class 0x020000
> [ 1.476251] pci 0000:04:00.1: reg 0x10: [mem 0xc5c00000-0xc5c1ffff]
> [ 1.476266] pci 0000:04:00.1: reg 0x14: [mem 0xc5400000-0xc57fffff]
> [ 1.476281] pci 0000:04:00.1: reg 0x18: [io 0x2000-0x201f]
> [ 1.476297] pci 0000:04:00.1: reg 0x1c: [mem 0xc5c40000-0xc5c43fff]
> [ 1.476339] pci 0000:04:00.1: reg 0x30: [mem 0xffc00000-0xffffffff pref]
> [ 1.476422] pci 0000:04:00.1: PME# supported from D0 D3hot
> [ 1.476473] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.476500] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.476599] pci 0000:02:04.0: PCI bridge to [bus 04]
> [ 1.476671] pci 0000:02:04.0: bridge window [io 0x2000-0x2fff]
> [ 1.476676] pci 0000:02:04.0: bridge window [mem 0xc5400000-0xc5cfffff]
> [ 1.476860] pci 0000:05:00.0: [14e4:163b] type 00 class 0x020000
> [ 1.476901] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xc1ffffff 64bit]
> [ 1.477142] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
> [ 1.477183] pci 0000:05:00.0: System wakeup disabled by ACPI
> [ 1.477332] pci 0000:05:00.1: [14e4:163b] type 00 class 0x020000
> [ 1.477373] pci 0000:05:00.1: reg 0x10: [mem 0xc2000000-0xc3ffffff 64bit]
> [ 1.477613] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
> [ 1.477744] pci 0000:00:1c.0: PCI bridge to [bus 05]
> [ 1.477817] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
> [ 1.477908] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
> [ 1.477940] pci 0000:06:03.0: reg 0x10: [mem 0xc4000000-0xc47fffff pref]
> [ 1.477958] pci 0000:06:03.0: reg 0x14: [mem 0xc5000000-0xc5003fff]
> [ 1.477975] pci 0000:06:03.0: reg 0x18: [mem 0xc4800000-0xc4ffffff]
> [ 1.478041] pci 0000:06:03.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
> [ 1.478192] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
> [ 1.478276] pci 0000:00:1e.0: bridge window [mem 0xc4800000-0xc50fffff]
> [ 1.478287] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xc47fffff
> 64bit pref]
> [ 1.478289] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
> (subtractive decode)
> [ 1.478290] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
> (subtractive decode)
> [ 1.478291] pci 0000:00:1e.0: bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> [ 1.478293] pci 0000:00:1e.0: bridge window [mem
> 0xc0000000-0xfeafffff] (subtractive decode)
> [ 1.478320] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
> unsupported)
> [ 1.478878] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14
> 15)
> [ 1.479470] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14
> 15)
> [ 1.480057] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14
> 15)
> [ 1.480644] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 *6 10 11 12 14
> 15)
> [ 1.481231] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 *14
> 15)
> [ 1.481820] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 *6 10 11 12 14
> 15)
> [ 1.482415] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14
> 15) *0, disabled.
> [ 1.483098] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14
> *15)
> [ 1.483877] ACPI: Enabled 6 GPEs in block 00 to 3F
> [ 1.484025] ACPI: \_SB_.PCI0: notify handler is installed
> [ 1.484067] Found 1 acpi root devices
> [ 1.484088] xen:balloon: Initialising balloon driver
> [ 1.491154] xen_balloon: Initialising balloon driver
> [ 1.491414] vgaarb: device added:
> PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.491502] vgaarb: loaded
> [ 1.491563] vgaarb: bridge control possible 0000:06:03.0
> [ 1.491760] SCSI subsystem initialized
> [ 1.491825] ACPI: bus type ATA registered
> [ 1.491921] libata version 3.00 loaded.
> [ 1.491934] ACPI: bus type USB registered
> [ 1.492011] usbcore: registered new interface driver usbfs
> [ 1.492079] usbcore: registered new interface driver hub
> [ 1.492264] usbcore: registered new device driver usb
> [ 1.492551] PCI: Using ACPI for IRQ routing
> [ 1.510875] PCI: pci_cache_line_size set to 64 bytes
> [ 1.510968] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
> [ 1.510969] e820: reserve RAM buffer [mem 0xbdfb0000-0xbfffffff]
> [ 1.510971] e820: reserve RAM buffer [mem 0xbf5d7000-0xbfffffff]
> [ 1.510973] e820: reserve RAM buffer [mem 0xbf5ea000-0xbfffffff]
> [ 1.510974] e820: reserve RAM buffer [mem 0xbf5f0000-0xbfffffff]
> [ 1.510975] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
> [ 1.510977] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
> [ 1.511048] NetLabel: Initializing
> [ 1.511111] NetLabel: domain hash size = 128
> [ 1.511175] NetLabel: protocols = UNLABELED CIPSOv4
> [ 1.511246] NetLabel: unlabeled traffic allowed by default
> [ 1.511498] Switched to clocksource xen
> [ 1.516125] AppArmor: AppArmor Filesystem Enabled
> [ 1.516207] pnp: PnP ACPI init
> [ 1.516276] ACPI: bus type PNP registered
> [ 1.516483] pnp 00:00: Plug and Play ACPI device, IDs IPI0001 (active)
> [ 1.516491] pnp 00:01: [dma 4]
> [ 1.516503] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 1.516519] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
> [ 1.516581] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 1.516589] xen: registering gsi 13 triggering 1 polarity 0
> [ 1.516622] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 1.516657] system 00:05: [io 0x0680-0x069f] has been reserved
> [ 1.516726] system 00:05: [io 0x1000-0x100f] has been reserved
> [ 1.516793] system 00:05: [io 0x1010-0x1013] has been reserved
> [ 1.516859] system 00:05: [io 0xffff] has been reserved
> [ 1.516924] system 00:05: [io 0x0400-0x0453] could not be reserved
> [ 1.516991] system 00:05: [io 0x0458-0x047f] has been reserved
> [ 1.517057] system 00:05: [io 0x0500-0x057f] has been reserved
> [ 1.517123] system 00:05: [io 0x164e-0x164f] has been reserved
> [ 1.517191] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.517197] xen: registering gsi 8 triggering 1 polarity 0
> [ 1.517224] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 1.517256] system 00:07: [io 0x0454-0x0457] has been reserved
> [ 1.517322] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02
> (active)
> [ 1.517527] xen: registering gsi 4 triggering 1 polarity 0
> [ 1.517570] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 1.517659] xen: registering gsi 3 triggering 1 polarity 0
> [ 1.517701] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 1.517727] system 00:0a: [mem 0xfed90000-0xfed91fff] has been reserved
> [ 1.517796] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.517934] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 1.518003] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 1.518071] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 1.518140] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 1.518208] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
> [ 1.518275] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 1.518343] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be
> reserved
> [ 1.518411] system 00:0b: [mem 0xff000000-0xffffffff] could not be
> reserved
> [ 1.518479] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
> reserved
> [ 1.518547] system 00:0b: [mem 0xc5f00000-0xc5f00fff] has been reserved
> [ 1.518616] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.518775] pnp: PnP ACPI: found 12 devices
> [ 1.518839] ACPI: bus type PNP unregistered
> [ 1.524234] PM-Timer failed consistency check (0x0xffffff) - aborting.
> [ 1.524305] pci 0000:04:00.0: no compatible bridge window for [mem
> 0xffc00000-0xffffffff pref]
> [ 1.524391] pci 0000:04:00.1: no compatible bridge window for [mem
> 0xffc00000-0xffffffff pref]
> [ 1.524478] pci 0000:06:03.0: no compatible bridge window for [mem
> 0xffff0000-0xffffffff pref]
> [ 1.524567] PCI: max bus depth: 3 pci_try_num: 4
> [ 1.524643] pci 0000:00:01.0: BAR 15: assigned [mem
> 0xc6000000-0xc67fffff pref]
> [ 1.524727] pci 0000:01:00.0: BAR 15: assigned [mem
> 0xc6000000-0xc67fffff pref]
> [ 1.524811] pci 0000:02:04.0: BAR 15: assigned [mem
> 0xc6000000-0xc67fffff pref]
> [ 1.524914] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.524930] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.524946] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.524962] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.524978] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.524994] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525010] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525026] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525042] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525059] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525075] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525077] pci 0000:03:00.0: BAR 7: assigned [mem 0xc5d48000-0xc5d67fff
> 64bit]
> [ 1.525184] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525186] pci 0000:03:00.0: BAR 10: assigned [mem
> 0xc5d68000-0xc5d87fff 64bit]
> [ 1.525294] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.525296] pci 0000:03:00.1: BAR 7: assigned [mem 0xc5d88000-0xc5da7fff
> 64bit]
> [ 1.526660] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.526661] pci 0000:03:00.1: BAR 10: assigned [mem
> 0xc5da8000-0xc5dc7fff 64bit]
> [ 1.526755] pci 0000:02:02.0: PCI bridge to [bus 03]
> [ 1.526822] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
> [ 1.526894] pci 0000:02:02.0: bridge window [mem 0xc5d00000-0xc5dfffff]
> [ 1.526986] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527003] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527019] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527035] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527051] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527067] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527083] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527099] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527115] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527131] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527147] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527149] pci 0000:04:00.0: BAR 6: assigned [mem 0xc6000000-0xc63fffff
> pref]
> [ 1.527233] pci 0000:04:00.1: BAR 6: assigned [mem 0xc6400000-0xc67fffff
> pref]
> [ 1.527331] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527333] pci 0000:04:00.0: BAR 7: assigned [mem 0xc5c48000-0xc5c67fff
> 64bit]
> [ 1.527441] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527443] pci 0000:04:00.0: BAR 10: assigned [mem
> 0xc5c68000-0xc5c87fff 64bit]
> [ 1.527557] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527559] pci 0000:04:00.1: BAR 7: assigned [mem 0xc5c88000-0xc5ca7fff
> 64bit]
> [ 1.527669] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff
> 64bit]
> [ 1.527671] pci 0000:04:00.1: BAR 10: assigned [mem
> 0xc5ca8000-0xc5cc7fff 64bit]
> [ 1.527764] pci 0000:02:04.0: PCI bridge to [bus 04]
> [ 1.527831] pci 0000:02:04.0: bridge window [io 0x2000-0x2fff]
> [ 1.527903] pci 0000:02:04.0: bridge window [mem 0xc5400000-0xc5cfffff]
> [ 1.527975] pci 0000:02:04.0: bridge window [mem 0xc6000000-0xc67fffff
> pref]
> [ 1.528064] pci 0000:01:00.0: PCI bridge to [bus 02-04]
> [ 1.528131] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
> [ 1.528203] pci 0000:01:00.0: bridge window [mem 0xc5400000-0xc5dfffff]
> [ 1.528275] pci 0000:01:00.0: bridge window [mem 0xc6000000-0xc67fffff
> pref]
> [ 1.528364] pci 0000:00:01.0: PCI bridge to [bus 01-04]
> [ 1.528429] pci 0000:00:01.0: bridge window [io 0x2000-0x3fff]
> [ 1.528498] pci 0000:00:01.0: bridge window [mem 0xc5400000-0xc5dfffff]
> [ 1.528567] pci 0000:00:01.0: bridge window [mem 0xc6000000-0xc67fffff
> pref]
> [ 1.528655] pci 0000:00:1c.0: PCI bridge to [bus 05]
> [ 1.528727] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
> [ 1.528809] pci 0000:06:03.0: BAR 6: assigned [mem 0xc5010000-0xc501ffff
> pref]
> [ 1.528891] pci 0000:00:1e.0: PCI bridge to [bus 06]
> [ 1.528963] pci 0000:00:1e.0: bridge window [mem 0xc4800000-0xc50fffff]
> [ 1.529036] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xc47fffff
> 64bit pref]
> [ 1.529194] xen: registering gsi 16 triggering 0 polarity 1
> [ 1.529206] xen: --> pirq=16 -> irq=16 (gsi=16)
> [ 1.529301] xen: registering gsi 17 triggering 0 polarity 1
> [ 1.529308] xen: --> pirq=17 -> irq=17 (gsi=17)
> [ 1.529334] pci 0000:00:1e.0: setting latency timer to 64
> [ 1.529339] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 1.529340] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 1.529341] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.529343] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
> [ 1.529344] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
> [ 1.529346] pci_bus 0000:01: resource 1 [mem 0xc5400000-0xc5dfffff]
> [ 1.529347] pci_bus 0000:01: resource 2 [mem 0xc6000000-0xc67fffff pref]
> [ 1.529349] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
> [ 1.529350] pci_bus 0000:02: resource 1 [mem 0xc5400000-0xc5dfffff]
> [ 1.529351] pci_bus 0000:02: resource 2 [mem 0xc6000000-0xc67fffff pref]
> [ 1.529353] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
> [ 1.529354] pci_bus 0000:03: resource 1 [mem 0xc5d00000-0xc5dfffff]
> [ 1.529356] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
> [ 1.529357] pci_bus 0000:04: resource 1 [mem 0xc5400000-0xc5cfffff]
> [ 1.529359] pci_bus 0000:04: resource 2 [mem 0xc6000000-0xc67fffff pref]
> [ 1.529360] pci_bus 0000:05: resource 1 [mem 0xc0000000-0xc3ffffff]
> [ 1.529362] pci_bus 0000:06: resource 1 [mem 0xc4800000-0xc50fffff]
> [ 1.529363] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc47fffff 64bit
> pref]
> [ 1.529365] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
> [ 1.529366] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
> [ 1.529367] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.529369] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfeafffff]
> [ 1.529390] NET: Registered protocol family 2
> [ 1.529604] TCP established hash table entries: 32768 (order: 7, 524288
> bytes)
> [ 1.529810] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
> [ 1.529938] TCP: Hash tables configured (established 32768 bind 32768)
> [ 1.530019] TCP: reno registered
> [ 1.530091] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [ 1.530172] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> [ 1.530283] NET: Registered protocol family 1
> [ 1.530418] xen: registering gsi 20 triggering 0 polarity 1
> [ 1.530425] xen: --> pirq=20 -> irq=20 (gsi=20)
> [ 1.543873] xen: registering gsi 23 triggering 0 polarity 1
> [ 1.543879] xen: --> pirq=23 -> irq=23 (gsi=23)
> [ 1.559714] pci 0000:06:03.0: Boot video device
> [ 1.559720] PCI: CLS 64 bytes, default 64
> [ 1.559755] Trying to unpack rootfs image as initramfs...
> [ 1.595644] Freeing initrd memory: 48296K (ffff8800023f3000 -
> ffff88000531d000)
> [ 1.595844] Simple Boot Flag at 0x44 set to 0x1
> [ 1.596123] Scanning for low memory corruption every 60 seconds
> [ 1.596685] Initialise module verification
> [ 1.596786] audit: initializing netlink socket (disabled)
> [ 1.596864] type=2000 audit(1391611311.580:1): initialized
> [ 1.616847] bounce pool size: 64 pages
> [ 1.616918] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.617727] zbud: loaded
> [ 1.617893] VFS: Disk quotas dquot_6.5.2
> [ 1.617987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.618401] fuse init (API version 7.22)
> [ 1.618521] msgmni has been set to 1736
> [ 1.619054] Key type asymmetric registered
> [ 1.619120] Asymmetric key parser 'x509' registered
> [ 1.619214] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 252)
> [ 1.619332] io scheduler noop registered
> [ 1.619396] io scheduler deadline registered (default)
> [ 1.619479] io scheduler cfq registered
> [ 1.620180] pcieport 0000:00:01.0: Signaling PME through PCIe PME
> interrupt
> [ 1.620249] pcieport 0000:01:00.0: Signaling PME through PCIe PME
> interrupt
> [ 1.620318] pcieport 0000:02:02.0: Signaling PME through PCIe PME
> interrupt
> [ 1.620386] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
> [ 1.620455] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
> [ 1.620522] pcieport 0000:02:04.0: Signaling PME through PCIe PME
> interrupt
> [ 1.620590] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
> [ 1.620656] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
> [ 1.620727] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
> [ 1.620753] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
> interrupt
> [ 1.620821] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
> [ 1.620889] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
> [ 1.620961] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
> [ 1.620971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.621045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.621152] intel_idle: MWAIT substates: 0x1120
> [ 1.621154] intel_idle: v0.4 model 0x2A
> [ 1.621154] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 1.621199] intel_idle: intel_idle yielding to none
> [ 1.621262] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 1.621349] ACPI: Power Button [PWRF]
> [ 1.621476] ACPI: Fan [FAN0] (off)
> [ 1.621558] ACPI: Fan [FAN1] (off)
> [ 1.621637] ACPI: Fan [FAN2] (off)
> [ 1.621716] ACPI: Fan [FAN3] (off)
> [ 1.621794] ACPI: Fan [FAN4] (off)
> [ 1.621891] ACPI: Requesting acpi_cpufreq
> [ 1.622414] Monitor-Mwait will be used to enter C-1 state
> [ 1.622420] Monitor-Mwait will be used to enter C-2 state
> [ 1.622423] Monitor-Mwait will be used to enter C-3 state
> [ 1.624107] Warning: Processor Platform Limit not supported.
> [ 1.624296] thermal LNXTHERM:00: registered as thermal_zone0
> [ 1.624364] ACPI: Thermal Zone [TZ01] (30 C)
> [ 1.624474] ERST: Error Record Serialization Table (ERST) support is
> initialized.
> [ 1.624559] pstore: Registered erst as persistent store backend
> [ 1.624741] GHES: APEI firmware first mode is enabled by APEI bit and
> WHEA _OSC.
> [ 1.625188] xen_acpi_processor: Uploading Xen processor PM info
> [ 1.626366] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 1.647206] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.668059] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 1.669363] hpet_acpi_add: no address or irqs in _CRS
> [ 1.669440] Linux agpgart interface v0.103
> [ 1.670447] brd: module loaded
> [ 1.671000] loop: module loaded
> [ 1.671294] libphy: Fixed MDIO Bus: probed
> [ 1.671407] tun: Universal TUN/TAP device driver, 1.6
> [ 1.671470] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com
(mailto:maxk@qualcomm.com)>
> [ 1.671611] PPP generic driver version 2.4.2
> [ 1.671716] xen_netfront: Initialising Xen virtual ethernet driver
> [ 1.671791] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
> [ 1.671857] ehci-pci: EHCI PCI platform driver
> [ 1.671999] xen: registering gsi 20 triggering 0 polarity 1
> [ 1.672002] Already setup the GSI :20
> [ 1.672084] ehci-pci 0000:00:1a.0: setting latency timer to 64
> [ 1.672092] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 1.672160] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
> number 1
> [ 1.672260] ehci-pci 0000:00:1a.0: debug port 2
> [ 1.676261] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 1.676301] ehci-pci 0000:00:1a.0: irq 20, io mem 0xc5e06000
> [ 1.687584] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 1.687679] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.687747] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.687831] usb usb1: Product: EHCI Host Controller
> [ 1.687896] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
> [ 1.687963] usb usb1: SerialNumber: 0000:00:1a.0
> [ 1.688117] hub 1-0:1.0: USB hub found
> [ 1.688184] hub 1-0:1.0: 2 ports detected
> [ 1.688391] xen: registering gsi 23 triggering 0 polarity 1
> [ 1.688393] Already setup the GSI :23
> [ 1.688472] ehci-pci 0000:00:1d.0: setting latency timer to 64
> [ 1.688479] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 1.688546] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
> number 2
> [ 1.688647] ehci-pci 0000:00:1d.0: debug port 2
> [ 1.692645] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 1.692683] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc5e05000
> [ 1.703612] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 1.703694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.703762] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.703847] usb usb2: Product: EHCI Host Controller
> [ 1.703911] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
> [ 1.703979] usb usb2: SerialNumber: 0000:00:1d.0
> [ 1.704211] hub 2-0:1.0: USB hub found
> [ 1.704279] hub 2-0:1.0: 2 ports detected
> [ 1.704405] ehci-platform: EHCI generic platform driver
> [ 1.704476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.704544] ohci-platform: OHCI generic platform driver
> [ 1.704612] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.704718] i8042: PNP: No PS/2 controller found. Probing ports directly.
> [ 2.751476] i8042: No controller found
> [ 2.751800] mousedev: PS/2 mouse device common for all mice
> [ 2.752046] rtc_cmos 00:06: RTC can wake from S4
> [ 2.752293] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [ 2.752416] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
> [ 2.752522] device-mapper: uevent: version 1.0.3
> [ 2.752670] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised:
> dm-devel@redhat.com (mailto:dm-devel@redhat.com)
> [ 2.752762] ledtrig-cpu: registered to indicate activity on CPUs
> [ 2.752882] TCP: cubic registered
> [ 2.753000] NET: Registered protocol family 10
> [ 2.753191] NET: Registered protocol family 17
> [ 2.753260] Key type dns_resolver registered
> [ 2.753510] PM: Hibernation image not present or could not be loaded.
> [ 2.753513] Loading module verification certificates
> [ 2.754269] MODSIGN: Loaded cert 'Magrathea: Glacier signing key:
> fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
> [ 2.754368] registered taskstats version 1
> [ 2.757449] Key type trusted registered
> [ 2.760138] Key type encrypted registered
> [ 2.762801] AppArmor: AppArmor sha1 policy hashing enabled
> [ 2.763263] Magic number: 2:965:686
> [ 2.763400] rtc_cmos 00:06: setting system clock to 2014-02-05 14:41:52
> UTC (1391611312)
> [ 2.763537] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> [ 2.764099] Freeing unused kernel memory: 1364K (ffffffff81d10000 -
> ffffffff81e65000)
> [ 2.764184] Write protecting the kernel read-only data: 12288k
> [ 2.766969] Freeing unused kernel memory: 1040K (ffff8800016fc000 -
> ffff880001800000)
> [ 2.767344] Freeing unused kernel memory: 836K (ffff880001b2f000 -
> ffff880001c00000)
> [ 2.788864] systemd-udevd[118]: starting version 204
> [ 2.810809] pps_core: module verification failed: signature and/or
> required key missing - tainting kernel
> [ 2.810979] pps_core: LinuxPPS API ver. 1 registered
> [ 2.811045] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <giometti@linux.it (mailto:giometti@linux.it)>
> [ 2.811354] PTP clock support registered
> [ 2.812518] dca service started, version 1.12.1
> [ 2.816654] igb: Intel(R) Gigabit Ethernet Network Driver - version
> 5.0.5-k
> [ 2.816725] igb: Copyright (c) 2007-2013 Intel Corporation.
> [ 2.816857] xen: registering gsi 18 triggering 0 polarity 1
> [ 2.816874] xen: --> pirq=18 -> irq=18 (gsi=18)
> [ 2.819595] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
> v2.2.3 (June 27, 2012)
> [ 2.819730] xen: registering gsi 16 triggering 0 polarity 1
> [ 2.819732] Already setup the GSI :16
> [ 2.820521] bnx2 0000:05:00.0 eth0: Broadcom NetXtreme II BCM5716
> 1000Base-T (C0) PCI Express found at mem c0000000, IRQ 16, node addr
> d4:ae:52:cc:f9:6a
> [ 2.820664] xen: registering gsi 17 triggering 0 polarity 1
> [ 2.820666] Already setup the GSI :17
> [ 2.821461] bnx2 0000:05:00.1 eth1: Broadcom NetXtreme II BCM5716
> 1000Base-T (C0) PCI Express found at mem c2000000, IRQ 17, node addr
> d4:ae:52:cc:f9:6b
> [ 2.821768] ahci 0000:00:1f.2: version 3.0
> [ 2.821852] xen: registering gsi 19 triggering 0 polarity 1
> [ 2.821860] xen: --> pirq=19 -> irq=19 (gsi=19)
> [ 2.821957] ahci: SSS flag set, parallel bus scan disabled
> [ 2.835589] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps
> 0x31 impl SATA mode
> [ 2.835678] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum
> part ems sxs apst
> [ 2.835776] ahci 0000:00:1f.2: setting latency timer to 64
> [ 2.851919] scsi0 : ahci
> [ 2.852047] scsi1 : ahci
> [ 2.852167] scsi2 : ahci
> [ 2.852288] scsi3 : ahci
> [ 2.852404] scsi4 : ahci
> [ 2.852521] scsi5 : ahci
> [ 2.852632] ata1: SATA max UDMA/133 abar m2048@0xc5e04000 port
> 0xc5e04100 irq 76
> [ 2.852725] ata2: DUMMY
> [ 2.852792] ata3: DUMMY
> [ 2.852861] ata4: DUMMY
> [ 2.852923] ata5: SATA max UDMA/133 abar m2048@0xc5e04000 port
> 0xc5e04300 irq 76
> [ 2.853005] ata6: SATA max UDMA/133 abar m2048@0xc5e04000 port
> 0xc5e04380 irq 76
> [ 2.930272] igb: probe of 0000:03:00.0 failed with error -2
> [ 2.930359] xen: registering gsi 19 triggering 0 polarity 1
> [ 2.930362] Already setup the GSI :19
> [ 2.963572] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 3.043827] igb: probe of 0000:03:00.1 failed with error -2
> [ 3.043911] xen: registering gsi 16 triggering 0 polarity 1
> [ 3.043913] Already setup the GSI :16
> [ 3.096098] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> [ 3.096169] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.096582] hub 1-1:1.0: USB hub found
> [ 3.096766] hub 1-1:1.0: 6 ports detected
> [ 3.171651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.172622] ata1.00: ATA-8: WDC WD5003ABYX-18WERA0, 01.01S03, max
> UDMA/133
> [ 3.172692] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
> 31/32), AA
> [ 3.174631] ata1.00: configured for UDMA/133
> [ 3.174899] scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYX-1
> 01.0 PQ: 0 ANSI: 5
> [ 3.175124] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
> GB/465 GiB)
> [ 3.175136] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 3.175305] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.175372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.175385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 3.207533] sda: sda1 sda2 < sda5 >
> [ 3.207988] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 3.211574] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [ 3.343975] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> [ 3.344045] usb 2-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 3.344429] hub 2-1:1.0: USB hub found
> [ 3.344656] hub 2-1:1.0: 6 ports detected
> [ 3.491623] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 3.495871] ata5.00: ATAPI: TSSTcorp DVD-ROM SN-108DN, D150, max UDMA/100
> [ 3.502634] ata5.00: configured for UDMA/100
> [ 3.523150] scsi 4:0:0:0: CD-ROM TSSTcorp DVD-ROM SN-108DN
> D150 PQ: 0 ANSI: 5
> [ 3.533834] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
> [ 3.533904] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 3.534114] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 3.534176] sr 4:0:0:0: Attached scsi generic sg1 type 5
> [ 3.615704] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
> [ 3.721480] usb 2-1.1: New USB device found, idVendor=0b95,
> idProduct=1780
> [ 3.721550] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 3.721633] usb 2-1.1: Product: AX88178
> [ 3.721696] usb 2-1.1: Manufacturer: ASIX Elec. Corp.
> [ 3.721760] usb 2-1.1: SerialNumber: 000002
> [ 3.791674] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
> [ 3.851623] ata6: SATA link down (SStatus 0 SControl 300)
> [ 3.896023] usb 2-1.2: New USB device found, idVendor=1061,
> idProduct=0101
> [ 3.896102] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3.896184] usb 2-1.2: Product: USB Keyboard & Mouse
> [ 3.896248] usb 2-1.2: Manufacturer: Motorola
> [ 3.903720] hidraw: raw HID events driver (C) Jiri Kosina
> [ 3.911687] usbcore: registered new interface driver usbhid
> [ 3.911754] usbhid: USB HID core driver
> [ 3.913114] input: Motorola USB Keyboard & Mouse as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
> [ 3.913287] hid-generic 0003:1061:0101.0001: input,hidraw0: USB HID
> v1.11 Keyboard [Motorola USB Keyboard & Mouse] on
> usb-0000:00:1d.0-1.2/input0
> [ 3.913465] input: Motorola USB Keyboard & Mouse as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input2
> [ 3.913648] hid-generic 0003:1061:0101.0002: input,hidraw1: USB HID
> v1.11 Mouse [Motorola USB Keyboard & Mouse] on
usb-0000:00:1d.0-1.2/input1
> [ 3.971702] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
> [ 4.004005] igb 0000:04:00.0: added PHC on eth2
> [ 4.004073] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network
> Connection
> [ 4.004141] igb 0000:04:00.0: eth2: (PCIe:2.5Gb/s:Width x4)
> 90:e2:ba:53:e5:24
> [ 4.004210] igb 0000:04:00.0: eth2: PBA No: Unknown
> [ 4.004275] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4
> tx queue(s)
> [ 4.004403] xen: registering gsi 17 triggering 0 polarity 1
> [ 4.004406] Already setup the GSI :17
> [ 4.063964] usb 2-1.5: New USB device found, idVendor=0424,
> idProduct=2514
> [ 4.064034] usb 2-1.5: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 4.064453] hub 2-1.5:1.0: USB hub found
> [ 4.064664] hub 2-1.5:1.0: 4 ports detected
> [ 4.115846] bio: create slab <bio-1> at 1
> [ 4.550844] EXT4-fs (dm-0): mounted filesystem with ordered data mode.
> Opts: (null)
> [ 4.968014] igb 0000:04:00.1: added PHC on eth3
> [ 4.968096] igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network
> Connection
> [ 4.968164] igb 0000:04:00.1: eth3: (PCIe:2.5Gb/s:Width x4)
> 90:e2:ba:53:e5:25
> [ 4.968233] igb 0000:04:00.1: eth3: PBA No: Unknown
> [ 4.968298] igb 0000:04:00.1: Using MSI-X interrupts. 4 rx queue(s), 4
> tx queue(s)
> [ 6.364613] Adding 4161532k swap on /dev/mapper/fiat--vg-swap_1.
> Priority:-1 extents:1 across:4161532k FS
> [ 6.900721] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
> [ 7.078991] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 7.078996] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 7.079000] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
> [ 7.079004] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
> [ 7.371646] systemd-udevd[361]: starting version 204
> [ 7.878340] lp: driver loaded but no devices found
> [ 9.826047] wmi: Mapper loaded
> [ 9.843887] systemd-udevd[460]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.846621] systemd-udevd[465]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.847206] systemd-udevd[466]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.849555] systemd-udevd[467]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.851680] systemd-udevd[469]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.853643] systemd-udevd[472]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.855475] systemd-udevd[474]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.857872] systemd-udevd[476]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.859002] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
> conflicts with Region \PMIO 1 (20130517/utaddress-251)
> [ 9.859007] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 9.859011] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO
> conflicts with Region \GPIO 1 (20130517/utaddress-251)
> [ 9.859013] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 9.859014] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
> conflicts with Region \GPIO 1 (20130517/utaddress-251)
> [ 9.859017] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 9.859018] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
> conflicts with Region \GPIO 1 (20130517/utaddress-251)
> [ 9.859020] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 9.859021] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 9.879903] systemd-udevd[487]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 9.897625] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
> [ 10.062885] dcdbas dcdbas: Dell Systems Management Base Driver (version
> 5.6.0-3.2)
> [ 10.395062] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
> [ 10.400676] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
> [ 10.401495] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
> [ 10.402320] microcode: Microcode Update Driver: v2.00 <
> tigran@aivazian.fsnet.co.uk (mailto:tigran@aivazian.fsnet.co.uk)>, Peter
Oruba
> [ 10.610920] systemd-udevd[570]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 10.610941] systemd-udevd[571]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 10.612923] systemd-udevd[573]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 10.749729] Bluetooth: Core ver 2.16
> [ 10.749748] NET: Registered protocol family 31
> [ 10.749750] Bluetooth: HCI device and connection manager initialized
> [ 10.749756] Bluetooth: HCI socket layer initialized
> [ 10.749758] Bluetooth: L2CAP socket layer initialized
> [ 10.749762] Bluetooth: SCO socket layer initialized
> [ 10.922110] type=1400 audit(1391611320.655:2): apparmor="STATUS"
> operation="profile_load" parent=544
profile="unconfined"
> name="/sbin/dhclient" pid=560 comm="apparmor_parser"
> [ 10.922117] type=1400 audit(1391611320.655:3): apparmor="STATUS"
> operation="profile_load" parent=544
profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560
> comm="apparmor_parser"
> [ 10.922120] type=1400 audit(1391611320.655:4): apparmor="STATUS"
> operation="profile_load" parent=544
profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=560
> comm="apparmor_parser"
> [ 10.922132] type=1400 audit(1391611320.655:5): apparmor="STATUS"
> operation="profile_replace" parent=542
profile="unconfined"
> name="/sbin/dhclient" pid=556 comm="apparmor_parser"
> [ 10.922139] type=1400 audit(1391611320.655:6): apparmor="STATUS"
> operation="profile_replace" parent=542
profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556
> comm="apparmor_parser"
> [ 10.922142] type=1400 audit(1391611320.655:7): apparmor="STATUS"
> operation="profile_replace" parent=542
profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=556
> comm="apparmor_parser"
> [ 10.922156] type=1400 audit(1391611320.655:8): apparmor="STATUS"
> operation="profile_replace" parent=543
profile="unconfined"
> name="/sbin/dhclient" pid=559 comm="apparmor_parser"
> [ 10.922162] type=1400 audit(1391611320.655:9): apparmor="STATUS"
> operation="profile_replace" parent=543
profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559
> comm="apparmor_parser"
> [ 10.922166] type=1400 audit(1391611320.655:10):
apparmor="STATUS"
> operation="profile_replace" parent=543
profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=559
> comm="apparmor_parser"
> [ 10.922186] type=1400 audit(1391611320.655:11):
apparmor="STATUS"
> operation="profile_replace" parent=547
profile="unconfined"
> name="/sbin/dhclient" pid=557 comm="apparmor_parser"
> [ 10.960369] Bluetooth: RFCOMM TTY layer initialized
> [ 10.960378] Bluetooth: RFCOMM socket layer initialized
> [ 10.960379] Bluetooth: RFCOMM ver 1.11
> [ 11.096147] init: avahi-cups-reload main process (598) terminated with
> status 1
> [ 11.167124] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 11.167127] Bluetooth: BNEP filters: protocol multicast
> [ 11.167134] Bluetooth: BNEP socket layer initialized
> [ 11.287751] asix 2-1.1:1.0 eth0: register 'asix' at
> usb-0000:00:1d.0-1.1, ASIX AX88178 USB 2.0 Ethernet, 00:0e:c6:88:f6:d3
> [ 11.287788] usbcore: registered new interface driver asix
> [ 11.288748] systemd-udevd[642]: failed to execute
> '/lib/udev/socket:/org/xen/xend/udev_event'
> 'socket:/org/xen/xend/udev_event': No such file or directory
> [ 11.341535] ppdev: user-space parallel port driver
> [ 11.696251] Bridge firewalling registered
> [ 11.699221] device eth0 entered promiscuous mode
> [ 12.437016] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 12.437109] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
> [ 15.138103] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 15.139187] asix 2-1.1:1.0 eth0: link up, 1000Mbps, full-duplex, lpa
> 0xC5E1
> [ 15.143931] xenbr0: port 1(eth0) entered forwarding state
> [ 15.143942] xenbr0: port 1(eth0) entered forwarding state
> [ 15.143955] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
> [ 15.768228] init: udev-fallback-graphics main process (932) terminated
> with status 1
> [ 17.202300] init: failsafe main process (628) killed by TERM signal
> [ 17.799180] audit_printk_skb: 69 callbacks suppressed
> [ 17.799184] type=1400 audit(1391611327.531:35):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="/sbin/dhclient" pid=1361 comm="apparmor_parser"
> [ 17.799189] type=1400 audit(1391611327.531:36):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1361
> comm="apparmor_parser"
> [ 17.799193] type=1400 audit(1391611327.531:37):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=1361
> comm="apparmor_parser"
> [ 17.799644] type=1400 audit(1391611327.535:38):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1361
> comm="apparmor_parser"
> [ 17.799649] type=1400 audit(1391611327.535:39):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=1361
> comm="apparmor_parser"
> [ 17.799876] type=1400 audit(1391611327.535:40):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="/usr/lib/connman/scripts/dhclient-script" pid=1361
> comm="apparmor_parser"
> [ 18.034955] type=1400 audit(1391611327.767:41):
apparmor="STATUS"
> operation="profile_load" parent=1353
profile="unconfined"
>
name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper"
> pid=1359 comm="apparmor_parser"
> [ 18.034960] type=1400 audit(1391611327.767:42):
apparmor="STATUS"
> operation="profile_load" parent=1353
profile="unconfined"
> name="chromium_browser" pid=1359 comm="apparmor_parser"
> [ 18.035292] type=1400 audit(1391611327.767:43):
apparmor="STATUS"
> operation="profile_replace" parent=1353
profile="unconfined"
> name="chromium_browser" pid=1359 comm="apparmor_parser"
> [ 18.067968] type=1400 audit(1391611327.803:44):
apparmor="STATUS"
> operation="profile_load" parent=1353
profile="unconfined"
>
name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper"
> pid=1360 comm="apparmor_parser"
> [ 19.521968] xen:xen_evtchn: Event-channel device installed
> [ 20.668188] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
> [ 20.668698] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
> [ 21.508464] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
> [ 21.508911] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
> [ 21.600614] bnx2 0000:05:00.0 eth3: using MSIX
> [ 21.600639] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
> [ 21.601034] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
> [ 21.656654] bnx2 0000:05:00.1 eth1: using MSIX
> [ 21.656676] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 21.657027] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 30.168115] xenbr0: port 1(eth0) entered forwarding state
> [ 679.030308] xen_pciback: backend is passthrough
> [ 679.119557] pciback 0000:05:00.0: seizing device
> [ 679.135333] xen: registering gsi 16 triggering 0 polarity 1
> [ 679.135338] Already setup the GSI :16
> [ 679.223564] pciback 0000:05:00.1: seizing device
> [ 679.239332] xen: registering gsi 17 triggering 0 polarity 1
> [ 679.239337] Already setup the GSI :17
> [ 826.675306] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
> [ 826.675650] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
> [ 826.847467] device vif1.0 entered promiscuous mode
> [ 827.529251] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 827.871604] device vif1.0-emu entered promiscuous mode
> [ 827.872947] xenbr0: port 3(vif1.0-emu) entered forwarding state
> [ 827.872953] xenbr0: port 3(vif1.0-emu) entered forwarding state
> [ 842.899266] xenbr0: port 3(vif1.0-emu) entered forwarding state
>
>
> /etc/xen/ubuntu-hvm-0.cfg
> kernel = "/usr/lib/xen-4.3/boot/hvmloader"
> builder='hvm'
> memory = 1024
> vcpus=2
> name = "ubuntu-hvm-0"
> vif = ['bridge=xenbr0']
> pci_permissive=1
> pci= ['05:00.0', '05:00.1']
> disk >
['phy:/dev/fiat-vg/ubuntu-hvm-0,hda,w','file:/root/ubuntu-12.04.3-server-amd64.iso,hdc:cdrom,r']
> acpi = 1
> device_model = 'qemu-dm'
> boot="d"
> sdl=0
> serial='pty'
> vnc=1
> #vnclisten=""
> vncpasswd=""
> on_poweroff = 'destroy'
> on_reboot = 'restart'
> on_crash = 'restart'
>
>
>
> Any suggestions?
>
>
> On Wed, Feb 5, 2014 at 8:54 AM, Mike Neiderhauser <
> mikeneiderhauser@gmail.com (mailto:mikeneiderhauser@gmail.com)> wrote:
>
> > I have. But I cant seem to get the xm toolstack to switch with xl.
> >
> > Regards
> >
> >
> > On Wed, Feb 5, 2014 at 8:53 AM, Ian Campbell
<Ian.Campbell@citrix.com (mailto:Ian.Campbell@citrix.com)>wrote:
> >
> > > On Wed, 2014-02-05 at 08:43 -0500, Mike Neiderhauser wrote:
> > > > Do you have any suggestions for a setup guide for 4.3? I
have
> > > > installed xen-hypervisor-4.3-amd64 from ubuntu package
manger and I
> > > > don't know where to go from here.
> > > >
> > >
> > >
> > > Have you looked on the wiki?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://lists.xen.org/archives/html/xen-users/attachments/20140205/1c17c753/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xen.org (mailto:Xen-users@lists.xen.org)
> http://lists.xen.org/xen-users
>
>
> End of Xen-users Digest, Vol 108, Issue 7
> *****************************************
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users