Hi to all, upgraded to Xen 2.0.6 on VMWare 5.0 Workstation, worked fine by using the *old* 2.0.5 Configs, i encounterd the following Error Messages on boot for 2 times, cause VMWareMachine is configured without a Floppy Drive. With 2.0.5 same VMWareMachine the Error doesnt show up, any suggestions ? (the Machine is working even with this error) Kind Regards Michael Lang <snip> floppy0: get result error. Fdc=0 Last status=f0 Read bytes=0 floppy driver state ------------------- now=4294955418 last interrupt=4294955418 diff=0 last called handler=c0234cce timeout_message=lock fdc last output bytes: 12 80 4294938387 0 90 4294938387 14 80 4294938387 18 80 4294938387 8 80 4294938387 8 80 4294938387 8 80 4294938387 8 80 4294938387 12 80 4294955417 0 90 4294955417 13 80 4294955417 0 90 4294955417 1a 90 4294955417 0 90 4294955417 3 80 4294955417 c1 90 4294955417 11 90 4294955417 7 80 4294955417 0 90 4294955417 8 80 4294955418 last result at 4294955418 last redo_fd_request at 4294955413 status=f0 fdc_busy=1 timer_function=c0235607 expires=295 now=4294955418 cont=c04432b4 current_req=00000000 command_status=-1 </snip> _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users