Xen devel - Jul 2013 - Dear Ren Yongjie

Hi Yongjie,

I have just compiled and installed Xen 4.3-unstable changeset 26666 and 
Linux kernel 3.8.1, according to your specifications. However, I still 
cannot get success with Intel HD Graphics 4600 IGD VGA passthrough.

Although in Device Manager in Windows 7 HVM domU, it says "This device 
is working properly" for Intel HD Graphics 4600, I can only get 16 
colors. Please refer to the following screenshots.

http://i.imgur.com/zaEGys4.jpg

http://i.imgur.com/KRZzxNZ.jpg

http://i.imgur.com/aVyuh4W.jpg

I have attached the relevant configuration files in this email. Please 
check to see if there are any mistakes.

Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6

Output of dmesg: http://pastebin.com/ixPuUnni

Output of sudo xl info: http://pastebin.com/JRuqi3ay

Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW

Please advise. I really hope to be able to make Intel HD Graphics 4600 
IGD VGA passthrough work successfully.

Thank you very much.

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)





_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Hi Yongjie,

I have just compiled and installed Xen 4.3-unstable changeset 26666 and 
Linux kernel 3.8.1, according to your specifications. However, I still 
cannot get success with Intel HD Graphics 4600 IGD VGA passthrough.

Although in Device Manager in Windows 7 HVM domU, it says "This device 
is working properly" for Intel HD Graphics 4600, I can only get 16 
colors. Please refer to the following screenshots.

http://i.imgur.com/zaEGys4.jpg

http://i.imgur.com/KRZzxNZ.jpg

http://i.imgur.com/aVyuh4W.jpg

I have attached the relevant configuration files in this email. Please 
check to see if there are any mistakes.

Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6

Output of dmesg: http://pastebin.com/ixPuUnni

Output of sudo xl info: http://pastebin.com/JRuqi3ay

Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW

Please advise. I really hope to be able to make Intel HD Graphics 4600 
IGD VGA passthrough work successfully.

Thank you very much.

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)





_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

> -----Original Message-----
> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> [mailto:singapore.mr.teo.en.ming@gmail.com]
> Sent: Thursday, August 01, 2013 5:25 AM
> To: Ren, Yongjie; xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En
> Ming (Zhang Enming)
> Subject: Dear Ren Yongjie
> 
> Hi Yongjie,
> 
> I have just compiled and installed Xen 4.3-unstable changeset 26666 and
> Linux kernel 3.8.1, according to your specifications. However, I still
> cannot get success with Intel HD Graphics 4600 IGD VGA passthrough.
> 
> Although in Device Manager in Windows 7 HVM domU, it says "This device
> is working properly" for Intel HD Graphics 4600, I can only get 16
> colors. Please refer to the following screenshots.
> 
> http://i.imgur.com/zaEGys4.jpg
> 
> http://i.imgur.com/KRZzxNZ.jpg
> 
> http://i.imgur.com/aVyuh4W.jpg
> 
> I have attached the relevant configuration files in this email. Please
> check to see if there are any mistakes.
> 
> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
> 
> Output of dmesg: http://pastebin.com/ixPuUnni
> 
> Output of sudo xl info: http://pastebin.com/JRuqi3ay
> 
> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
> 
> Please advise. I really hope to be able to make Intel HD Graphics 4600
> IGD VGA passthrough work successfully.
> 
Hi Enming,
I can''t reproduce your issue even if I use your Dom0 and guest config.
So, can you can try the following two:
1. use upstream Xen/Dom0 to try since that also works for me.
2. try other HSW CPU (e.g. Core i5-4670 which works for me)

Best Regards,
     Yongjie (Jay)

On 01/08/2013 15:28, Ren, Yongjie wrote:
>> -----Original Message-----
>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>> Sent: Thursday, August 01, 2013 5:25 AM
>> To: Ren, Yongjie; xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo
En
>> Ming (Zhang Enming)
>> Subject: Dear Ren Yongjie
>>
>> Hi Yongjie,
>>
>> I have just compiled and installed Xen 4.3-unstable changeset 26666 and
>> Linux kernel 3.8.1, according to your specifications. However, I still
>> cannot get success with Intel HD Graphics 4600 IGD VGA passthrough.
>>
>> Although in Device Manager in Windows 7 HVM domU, it says "This
device
>> is working properly" for Intel HD Graphics 4600, I can only get 16
>> colors. Please refer to the following screenshots.
>>
>> http://i.imgur.com/zaEGys4.jpg
>>
>> http://i.imgur.com/KRZzxNZ.jpg
>>
>> http://i.imgur.com/aVyuh4W.jpg
>>
>> I have attached the relevant configuration files in this email. Please
>> check to see if there are any mistakes.
>>
>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>
>> Output of dmesg: http://pastebin.com/ixPuUnni
>>
>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>
>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>
>> Please advise. I really hope to be able to make Intel HD Graphics 4600
>> IGD VGA passthrough work successfully.
>>
> Hi Enming,
> I can''t reproduce your issue even if I use your Dom0 and guest
config.
> So, can you can try the following two:
> 1. use upstream Xen/Dom0 to try since that also works for me.
Dear Yongjie,

What do you mean by upstream Xen/Dom0? I don''t understand.
> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
I am sorry but it is out of budget for me. I can''t buy another cpu to 
test vga passthrough.
>
> Best Regards,
>       Yongjie (Jay)
>
By the way, what distro and version are you using for your dom0? Is it 
Ubuntu, Debian, Mint or Fedora?

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

On 01/08/2013 15:28, Ren, Yongjie wrote:
>> -----Original Message-----
>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>> Sent: Thursday, August 01, 2013 5:25 AM
>> To: Ren, Yongjie; xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo
En
>> Ming (Zhang Enming)
>> Subject: Dear Ren Yongjie
>>
>> Hi Yongjie,
>>
>> I have just compiled and installed Xen 4.3-unstable changeset 26666 and
>> Linux kernel 3.8.1, according to your specifications. However, I still
>> cannot get success with Intel HD Graphics 4600 IGD VGA passthrough.
>>
>> Although in Device Manager in Windows 7 HVM domU, it says "This
device
>> is working properly" for Intel HD Graphics 4600, I can only get 16
>> colors. Please refer to the following screenshots.
>>
>> http://i.imgur.com/zaEGys4.jpg
>>
>> http://i.imgur.com/KRZzxNZ.jpg
>>
>> http://i.imgur.com/aVyuh4W.jpg
>>
>> I have attached the relevant configuration files in this email. Please
>> check to see if there are any mistakes.
>>
>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>
>> Output of dmesg: http://pastebin.com/ixPuUnni
>>
>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>
>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>
>> Please advise. I really hope to be able to make Intel HD Graphics 4600
>> IGD VGA passthrough work successfully.
>>
> Hi Enming,
> I can''t reproduce your issue even if I use your Dom0 and guest
config.
> So, can you can try the following two:
> 1. use upstream Xen/Dom0 to try since that also works for me.
Dear Yongjie,

What do you mean by upstream Xen/Dom0? I don''t understand.
> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
I am sorry but it is out of budget for me. I can''t buy another cpu to 
test vga passthrough.
>
> Best Regards,
>       Yongjie (Jay)
>
By the way, what distro and version are you using for your dom0? Is it 
Ubuntu, Debian, Mint or Fedora?

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

> -----Original Message-----
> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> [mailto:singapore.mr.teo.en.ming@gmail.com]
> Sent: Thursday, August 01, 2013 7:03 PM
> To: Ren, Yongjie
> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En Ming (Zhang
> Enming)
> Subject: Re: Dear Ren Yongjie
> 
> On 01/08/2013 15:28, Ren, Yongjie wrote:
> >> -----Original Message-----
> >> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> >> [mailto:singapore.mr.teo.en.ming@gmail.com]
> >> Sent: Thursday, August 01, 2013 5:25 AM
> >> To: Ren, Yongjie; xen-users@lists.xen.org;
xen-devel@lists.xen.org; Teo
> En
> >> Ming (Zhang Enming)
> >> Subject: Dear Ren Yongjie
> >>
> >> Hi Yongjie,
> >>
> >> I have just compiled and installed Xen 4.3-unstable changeset
26666
> and
> >> Linux kernel 3.8.1, according to your specifications. However, I
still
> >> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
> >>
> >> Although in Device Manager in Windows 7 HVM domU, it says
"This
> device
> >> is working properly" for Intel HD Graphics 4600, I can only
get 16
> >> colors. Please refer to the following screenshots.
> >>
> >> http://i.imgur.com/zaEGys4.jpg
> >>
> >> http://i.imgur.com/KRZzxNZ.jpg
> >>
> >> http://i.imgur.com/aVyuh4W.jpg
> >>
> >> I have attached the relevant configuration files in this email.
Please
> >> check to see if there are any mistakes.
> >>
> >> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
> >>
> >> Output of dmesg: http://pastebin.com/ixPuUnni
> >>
> >> Output of sudo xl info: http://pastebin.com/JRuqi3ay
> >>
> >> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
> >>
> >> Please advise. I really hope to be able to make Intel HD Graphics
4600
> >> IGD VGA passthrough work successfully.
> >>
> > Hi Enming,
> > I can''t reproduce your issue even if I use your Dom0 and
guest config.
> > So, can you can try the following two:
> > 1. use upstream Xen/Dom0 to try since that also works for me.
> 
> Dear Yongjie,
> 
> What do you mean by upstream Xen/Dom0? I don''t understand.
> 
I mean using latest Xen and Dom0 is also fine for VGA passthru.
No need to use specific changeset of Xen.
> > 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
> 
> I am sorry but it is out of budget for me. I can''t buy another cpu
to
> test vga passthrough.
> >
> > Best Regards,
> >       Yongjie (Jay)
> >
> By the way, what distro and version are you using for your dom0? Is it
> Ubuntu, Debian, Mint or Fedora?
> 
I''m using RHEL6.4. I think it doesn''t matter. 

Best Regards,
     Yongjie (Jay)

> -----Original Message-----
> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> [mailto:singapore.mr.teo.en.ming@gmail.com]
> Sent: Thursday, August 01, 2013 7:03 PM
> To: Ren, Yongjie
> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En Ming (Zhang
> Enming)
> Subject: Re: Dear Ren Yongjie
> 
> On 01/08/2013 15:28, Ren, Yongjie wrote:
> >> -----Original Message-----
> >> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> >> [mailto:singapore.mr.teo.en.ming@gmail.com]
> >> Sent: Thursday, August 01, 2013 5:25 AM
> >> To: Ren, Yongjie; xen-users@lists.xen.org;
xen-devel@lists.xen.org; Teo
> En
> >> Ming (Zhang Enming)
> >> Subject: Dear Ren Yongjie
> >>
> >> Hi Yongjie,
> >>
> >> I have just compiled and installed Xen 4.3-unstable changeset
26666
> and
> >> Linux kernel 3.8.1, according to your specifications. However, I
still
> >> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
> >>
> >> Although in Device Manager in Windows 7 HVM domU, it says
"This
> device
> >> is working properly" for Intel HD Graphics 4600, I can only
get 16
> >> colors. Please refer to the following screenshots.
> >>
> >> http://i.imgur.com/zaEGys4.jpg
> >>
> >> http://i.imgur.com/KRZzxNZ.jpg
> >>
> >> http://i.imgur.com/aVyuh4W.jpg
> >>
> >> I have attached the relevant configuration files in this email.
Please
> >> check to see if there are any mistakes.
> >>
> >> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
> >>
> >> Output of dmesg: http://pastebin.com/ixPuUnni
> >>
> >> Output of sudo xl info: http://pastebin.com/JRuqi3ay
> >>
> >> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
> >>
> >> Please advise. I really hope to be able to make Intel HD Graphics
4600
> >> IGD VGA passthrough work successfully.
> >>
> > Hi Enming,
> > I can''t reproduce your issue even if I use your Dom0 and
guest config.
> > So, can you can try the following two:
> > 1. use upstream Xen/Dom0 to try since that also works for me.
> 
> Dear Yongjie,
> 
> What do you mean by upstream Xen/Dom0? I don''t understand.
> 
I mean using latest Xen and Dom0 is also fine for VGA passthru.
No need to use specific changeset of Xen.
> > 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
> 
> I am sorry but it is out of budget for me. I can''t buy another cpu
to
> test vga passthrough.
> >
> > Best Regards,
> >       Yongjie (Jay)
> >
> By the way, what distro and version are you using for your dom0? Is it
> Ubuntu, Debian, Mint or Fedora?
> 
I''m using RHEL6.4. I think it doesn''t matter. 

Best Regards,
     Yongjie (Jay)

On 01/08/2013 21:24, Ren, Yongjie wrote:
>> -----Original Message-----
>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>> Sent: Thursday, August 01, 2013 7:03 PM
>> To: Ren, Yongjie
>> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En Ming
(Zhang
>> Enming)
>> Subject: Re: Dear Ren Yongjie
>>
>> On 01/08/2013 15:28, Ren, Yongjie wrote:
>>>> -----Original Message-----
>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>> Sent: Thursday, August 01, 2013 5:25 AM
>>>> To: Ren, Yongjie; xen-users@lists.xen.org;
xen-devel@lists.xen.org; Teo
>> En
>>>> Ming (Zhang Enming)
>>>> Subject: Dear Ren Yongjie
>>>>
>>>> Hi Yongjie,
>>>>
>>>> I have just compiled and installed Xen 4.3-unstable changeset
26666
>> and
>>>> Linux kernel 3.8.1, according to your specifications. However,
I still
>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
>>>>
>>>> Although in Device Manager in Windows 7 HVM domU, it says
"This
>> device
>>>> is working properly" for Intel HD Graphics 4600, I can
only get 16
>>>> colors. Please refer to the following screenshots.
>>>>
>>>> http://i.imgur.com/zaEGys4.jpg
>>>>
>>>> http://i.imgur.com/KRZzxNZ.jpg
>>>>
>>>> http://i.imgur.com/aVyuh4W.jpg
>>>>
>>>> I have attached the relevant configuration files in this email.
Please
>>>> check to see if there are any mistakes.
>>>>
>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>>>
>>>> Output of dmesg: http://pastebin.com/ixPuUnni
>>>>
>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>>>
>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>>>
>>>> Please advise. I really hope to be able to make Intel HD
Graphics 4600
>>>> IGD VGA passthrough work successfully.
>>>>
>>> Hi Enming,
>>> I can''t reproduce your issue even if I use your Dom0 and
guest config.
>>> So, can you can try the following two:
>>> 1. use upstream Xen/Dom0 to try since that also works for me.
>> Dear Yongjie,
>>
>> What do you mean by upstream Xen/Dom0? I don''t understand.
>>
> I mean using latest Xen and Dom0 is also fine for VGA passthru.
> No need to use specific changeset of Xen.
>
>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
>> I am sorry but it is out of budget for me. I can''t buy another
cpu to
>> test vga passthrough.
>>> Best Regards,
>>>        Yongjie (Jay)
>>>
>> By the way, what distro and version are you using for your dom0? Is it
>> Ubuntu, Debian, Mint or Fedora?
>>
> I''m using RHEL6.4. I think it doesn''t matter.
>
> Best Regards,
>       Yongjie (Jay)
>
Dear Yongjie and Xen developers,

I have compiled and installed the latest Xen 4.4-unstable changeset 
27305 and Linux kernel 3.10.3.

Although I did not get error code 43 for Intel HD Graphics 4600 IGD in 
device manager, I am still getting 16 colors only for the monitor!!!

How can I solve this problem?

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

On 01/08/2013 21:24, Ren, Yongjie wrote:
>> -----Original Message-----
>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>> Sent: Thursday, August 01, 2013 7:03 PM
>> To: Ren, Yongjie
>> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En Ming
(Zhang
>> Enming)
>> Subject: Re: Dear Ren Yongjie
>>
>> On 01/08/2013 15:28, Ren, Yongjie wrote:
>>>> -----Original Message-----
>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>> Sent: Thursday, August 01, 2013 5:25 AM
>>>> To: Ren, Yongjie; xen-users@lists.xen.org;
xen-devel@lists.xen.org; Teo
>> En
>>>> Ming (Zhang Enming)
>>>> Subject: Dear Ren Yongjie
>>>>
>>>> Hi Yongjie,
>>>>
>>>> I have just compiled and installed Xen 4.3-unstable changeset
26666
>> and
>>>> Linux kernel 3.8.1, according to your specifications. However,
I still
>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
>>>>
>>>> Although in Device Manager in Windows 7 HVM domU, it says
"This
>> device
>>>> is working properly" for Intel HD Graphics 4600, I can
only get 16
>>>> colors. Please refer to the following screenshots.
>>>>
>>>> http://i.imgur.com/zaEGys4.jpg
>>>>
>>>> http://i.imgur.com/KRZzxNZ.jpg
>>>>
>>>> http://i.imgur.com/aVyuh4W.jpg
>>>>
>>>> I have attached the relevant configuration files in this email.
Please
>>>> check to see if there are any mistakes.
>>>>
>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>>>
>>>> Output of dmesg: http://pastebin.com/ixPuUnni
>>>>
>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>>>
>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>>>
>>>> Please advise. I really hope to be able to make Intel HD
Graphics 4600
>>>> IGD VGA passthrough work successfully.
>>>>
>>> Hi Enming,
>>> I can''t reproduce your issue even if I use your Dom0 and
guest config.
>>> So, can you can try the following two:
>>> 1. use upstream Xen/Dom0 to try since that also works for me.
>> Dear Yongjie,
>>
>> What do you mean by upstream Xen/Dom0? I don''t understand.
>>
> I mean using latest Xen and Dom0 is also fine for VGA passthru.
> No need to use specific changeset of Xen.
>
>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
>> I am sorry but it is out of budget for me. I can''t buy another
cpu to
>> test vga passthrough.
>>> Best Regards,
>>>        Yongjie (Jay)
>>>
>> By the way, what distro and version are you using for your dom0? Is it
>> Ubuntu, Debian, Mint or Fedora?
>>
> I''m using RHEL6.4. I think it doesn''t matter.
>
> Best Regards,
>       Yongjie (Jay)
>
Dear Yongjie and Xen developers,

I have compiled and installed the latest Xen 4.4-unstable changeset 
27305 and Linux kernel 3.10.3.

Although I did not get error code 43 for Intel HD Graphics 4600 IGD in 
device manager, I am still getting 16 colors only for the monitor!!!

How can I solve this problem?

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

On 01/08/2013 22:39, Singapore Citizen Mr. Teo En Ming (Zhang Enming)
wrote:
> On 01/08/2013 21:24, Ren, Yongjie wrote:
>>> -----Original Message-----
>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>> Sent: Thursday, August 01, 2013 7:03 PM
>>> To: Ren, Yongjie
>>> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En Ming 
>>> (Zhang
>>> Enming)
>>> Subject: Re: Dear Ren Yongjie
>>>
>>> On 01/08/2013 15:28, Ren, Yongjie wrote:
>>>>> -----Original Message-----
>>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>>> Sent: Thursday, August 01, 2013 5:25 AM
>>>>> To: Ren, Yongjie; xen-users@lists.xen.org; 
>>>>> xen-devel@lists.xen.org; Teo
>>> En
>>>>> Ming (Zhang Enming)
>>>>> Subject: Dear Ren Yongjie
>>>>>
>>>>> Hi Yongjie,
>>>>>
>>>>> I have just compiled and installed Xen 4.3-unstable
changeset 26666
>>> and
>>>>> Linux kernel 3.8.1, according to your specifications.
However, I
>>>>> still
>>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
>>>>>
>>>>> Although in Device Manager in Windows 7 HVM domU, it says
"This
>>> device
>>>>> is working properly" for Intel HD Graphics 4600, I can
only get 16
>>>>> colors. Please refer to the following screenshots.
>>>>>
>>>>> http://i.imgur.com/zaEGys4.jpg
>>>>>
>>>>> http://i.imgur.com/KRZzxNZ.jpg
>>>>>
>>>>> http://i.imgur.com/aVyuh4W.jpg
>>>>>
>>>>> I have attached the relevant configuration files in this
email.
>>>>> Please
>>>>> check to see if there are any mistakes.
>>>>>
>>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>>>>
>>>>> Output of dmesg: http://pastebin.com/ixPuUnni
>>>>>
>>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>>>>
>>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>>>>
>>>>> Please advise. I really hope to be able to make Intel HD
Graphics
>>>>> 4600
>>>>> IGD VGA passthrough work successfully.
>>>>>
>>>> Hi Enming,
>>>> I can''t reproduce your issue even if I use your Dom0
and guest config.
>>>> So, can you can try the following two:
>>>> 1. use upstream Xen/Dom0 to try since that also works for me.
>>> Dear Yongjie,
>>>
>>> What do you mean by upstream Xen/Dom0? I don''t understand.
>>>
>> I mean using latest Xen and Dom0 is also fine for VGA passthru.
>> No need to use specific changeset of Xen.
>>
>>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
>>> I am sorry but it is out of budget for me. I can''t buy
another cpu to
>>> test vga passthrough.
>>>> Best Regards,
>>>>        Yongjie (Jay)
>>>>
>>> By the way, what distro and version are you using for your dom0? Is
it
>>> Ubuntu, Debian, Mint or Fedora?
>>>
>> I''m using RHEL6.4. I think it doesn''t matter.
>>
>> Best Regards,
>>       Yongjie (Jay)
>>
>
> Dear Yongjie and Xen developers,
>
> I have compiled and installed the latest Xen 4.4-unstable changeset 
> 27305 and Linux kernel 3.10.3.
>
> Although I did not get error code 43 for Intel HD Graphics 4600 IGD in 
> device manager, I am still getting 16 colors only for the monitor!!!
>
> How can I solve this problem?
>
Hi Yongjie,

I have installed Fedora 19 x86_64 as a dom0 and compiled and installed 
Xen 4.4-unstable changeset 27305 and Linux kernel 3.10.5. Previously I 
was using Ubuntu 12.04.2 LTS as dom0.

Although I did not get error code 43 for Intel HD Graphics 4600 in 
device manager, I am still getting only 16 colors on the display. I 
really do not know where the problem lies. Device manager says "This 
device is working properly.", yet I am still getting only 16 colors on 
the display.

Could you share with me your /etc/grub.d/40_custom GRUB2 contents?

Thank you very much.

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

On 01/08/2013 22:39, Singapore Citizen Mr. Teo En Ming (Zhang Enming)
wrote:
> On 01/08/2013 21:24, Ren, Yongjie wrote:
>>> -----Original Message-----
>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>> Sent: Thursday, August 01, 2013 7:03 PM
>>> To: Ren, Yongjie
>>> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En Ming 
>>> (Zhang
>>> Enming)
>>> Subject: Re: Dear Ren Yongjie
>>>
>>> On 01/08/2013 15:28, Ren, Yongjie wrote:
>>>>> -----Original Message-----
>>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>>> Sent: Thursday, August 01, 2013 5:25 AM
>>>>> To: Ren, Yongjie; xen-users@lists.xen.org; 
>>>>> xen-devel@lists.xen.org; Teo
>>> En
>>>>> Ming (Zhang Enming)
>>>>> Subject: Dear Ren Yongjie
>>>>>
>>>>> Hi Yongjie,
>>>>>
>>>>> I have just compiled and installed Xen 4.3-unstable
changeset 26666
>>> and
>>>>> Linux kernel 3.8.1, according to your specifications.
However, I
>>>>> still
>>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
>>>>>
>>>>> Although in Device Manager in Windows 7 HVM domU, it says
"This
>>> device
>>>>> is working properly" for Intel HD Graphics 4600, I can
only get 16
>>>>> colors. Please refer to the following screenshots.
>>>>>
>>>>> http://i.imgur.com/zaEGys4.jpg
>>>>>
>>>>> http://i.imgur.com/KRZzxNZ.jpg
>>>>>
>>>>> http://i.imgur.com/aVyuh4W.jpg
>>>>>
>>>>> I have attached the relevant configuration files in this
email.
>>>>> Please
>>>>> check to see if there are any mistakes.
>>>>>
>>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>>>>
>>>>> Output of dmesg: http://pastebin.com/ixPuUnni
>>>>>
>>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>>>>
>>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>>>>
>>>>> Please advise. I really hope to be able to make Intel HD
Graphics
>>>>> 4600
>>>>> IGD VGA passthrough work successfully.
>>>>>
>>>> Hi Enming,
>>>> I can''t reproduce your issue even if I use your Dom0
and guest config.
>>>> So, can you can try the following two:
>>>> 1. use upstream Xen/Dom0 to try since that also works for me.
>>> Dear Yongjie,
>>>
>>> What do you mean by upstream Xen/Dom0? I don''t understand.
>>>
>> I mean using latest Xen and Dom0 is also fine for VGA passthru.
>> No need to use specific changeset of Xen.
>>
>>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
>>> I am sorry but it is out of budget for me. I can''t buy
another cpu to
>>> test vga passthrough.
>>>> Best Regards,
>>>>        Yongjie (Jay)
>>>>
>>> By the way, what distro and version are you using for your dom0? Is
it
>>> Ubuntu, Debian, Mint or Fedora?
>>>
>> I''m using RHEL6.4. I think it doesn''t matter.
>>
>> Best Regards,
>>       Yongjie (Jay)
>>
>
> Dear Yongjie and Xen developers,
>
> I have compiled and installed the latest Xen 4.4-unstable changeset 
> 27305 and Linux kernel 3.10.3.
>
> Although I did not get error code 43 for Intel HD Graphics 4600 IGD in 
> device manager, I am still getting 16 colors only for the monitor!!!
>
> How can I solve this problem?
>
Hi Yongjie,

I have installed Fedora 19 x86_64 as a dom0 and compiled and installed 
Xen 4.4-unstable changeset 27305 and Linux kernel 3.10.5. Previously I 
was using Ubuntu 12.04.2 LTS as dom0.

Although I did not get error code 43 for Intel HD Graphics 4600 in 
device manager, I am still getting only 16 colors on the display. I 
really do not know where the problem lies. Device manager says "This 
device is working properly.", yet I am still getting only 16 colors on 
the display.

Could you share with me your /etc/grub.d/40_custom GRUB2 contents?

Thank you very much.

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

On 07/08/2013 23:20, Singapore Citizen Mr. Teo En Ming (Zhang Enming)
wrote:
> On 01/08/2013 22:39, Singapore Citizen Mr. Teo En Ming (Zhang Enming) 
> wrote:
>> On 01/08/2013 21:24, Ren, Yongjie wrote:
>>>> -----Original Message-----
>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>> Sent: Thursday, August 01, 2013 7:03 PM
>>>> To: Ren, Yongjie
>>>> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En
Ming
>>>> (Zhang
>>>> Enming)
>>>> Subject: Re: Dear Ren Yongjie
>>>>
>>>> On 01/08/2013 15:28, Ren, Yongjie wrote:
>>>>>> -----Original Message-----
>>>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>>>> Sent: Thursday, August 01, 2013 5:25 AM
>>>>>> To: Ren, Yongjie; xen-users@lists.xen.org; 
>>>>>> xen-devel@lists.xen.org; Teo
>>>> En
>>>>>> Ming (Zhang Enming)
>>>>>> Subject: Dear Ren Yongjie
>>>>>>
>>>>>> Hi Yongjie,
>>>>>>
>>>>>> I have just compiled and installed Xen 4.3-unstable
changeset 26666
>>>> and
>>>>>> Linux kernel 3.8.1, according to your specifications.
However, I
>>>>>> still
>>>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
>>>>>>
>>>>>> Although in Device Manager in Windows 7 HVM domU, it
says "This
>>>> device
>>>>>> is working properly" for Intel HD Graphics 4600, I
can only get 16
>>>>>> colors. Please refer to the following screenshots.
>>>>>>
>>>>>> http://i.imgur.com/zaEGys4.jpg
>>>>>>
>>>>>> http://i.imgur.com/KRZzxNZ.jpg
>>>>>>
>>>>>> http://i.imgur.com/aVyuh4W.jpg
>>>>>>
>>>>>> I have attached the relevant configuration files in
this email.
>>>>>> Please
>>>>>> check to see if there are any mistakes.
>>>>>>
>>>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>>>>>
>>>>>> Output of dmesg: http://pastebin.com/ixPuUnni
>>>>>>
>>>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>>>>>
>>>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>>>>>
>>>>>> Please advise. I really hope to be able to make Intel
HD Graphics
>>>>>> 4600
>>>>>> IGD VGA passthrough work successfully.
>>>>>>
>>>>> Hi Enming,
>>>>> I can''t reproduce your issue even if I use your
Dom0 and guest
>>>>> config.
>>>>> So, can you can try the following two:
>>>>> 1. use upstream Xen/Dom0 to try since that also works for
me.
>>>> Dear Yongjie,
>>>>
>>>> What do you mean by upstream Xen/Dom0? I don''t
understand.
>>>>
>>> I mean using latest Xen and Dom0 is also fine for VGA passthru.
>>> No need to use specific changeset of Xen.
>>>
>>>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
>>>> I am sorry but it is out of budget for me. I can''t buy
another cpu to
>>>> test vga passthrough.
>>>>> Best Regards,
>>>>>        Yongjie (Jay)
>>>>>
>>>> By the way, what distro and version are you using for your
dom0? Is it
>>>> Ubuntu, Debian, Mint or Fedora?
>>>>
>>> I''m using RHEL6.4. I think it doesn''t matter.
>>>
>>> Best Regards,
>>>       Yongjie (Jay)
>>>
>>
>> Dear Yongjie and Xen developers,
>>
>> I have compiled and installed the latest Xen 4.4-unstable changeset 
>> 27305 and Linux kernel 3.10.3.
>>
>> Although I did not get error code 43 for Intel HD Graphics 4600 IGD 
>> in device manager, I am still getting 16 colors only for the monitor!!!
>>
>> How can I solve this problem?
>>
>
> Hi Yongjie,
>
> I have installed Fedora 19 x86_64 as a dom0 and compiled and installed 
> Xen 4.4-unstable changeset 27305 and Linux kernel 3.10.5. Previously I 
> was using Ubuntu 12.04.2 LTS as dom0.
>
> Although I did not get error code 43 for Intel HD Graphics 4600 in 
> device manager, I am still getting only 16 colors on the display. I 
> really do not know where the problem lies. Device manager says "This 
> device is working properly.", yet I am still getting only 16 colors on
> the display.
>
> Could you share with me your /etc/grub.d/40_custom GRUB2 contents?
>
> Thank you very much.
>
Dear Yongjie,

I am not sure what went wrong but error code 43 comes back again. All I 
did was to blacklist the i915, nouveau, and snd_hda_intel kernel 
modules, rebuild the initial ramdisk, and turn off gdm. Could you tell 
me what went wrong?

Could you share with us your full GRUB2 configuration and Windows 7 HVM 
domU configuration?

Thank you very much.

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)

On 07/08/2013 23:20, Singapore Citizen Mr. Teo En Ming (Zhang Enming)
wrote:
> On 01/08/2013 22:39, Singapore Citizen Mr. Teo En Ming (Zhang Enming) 
> wrote:
>> On 01/08/2013 21:24, Ren, Yongjie wrote:
>>>> -----Original Message-----
>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>> Sent: Thursday, August 01, 2013 7:03 PM
>>>> To: Ren, Yongjie
>>>> Cc: xen-users@lists.xen.org; xen-devel@lists.xen.org; Teo En
Ming
>>>> (Zhang
>>>> Enming)
>>>> Subject: Re: Dear Ren Yongjie
>>>>
>>>> On 01/08/2013 15:28, Ren, Yongjie wrote:
>>>>>> -----Original Message-----
>>>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
>>>>>> [mailto:singapore.mr.teo.en.ming@gmail.com]
>>>>>> Sent: Thursday, August 01, 2013 5:25 AM
>>>>>> To: Ren, Yongjie; xen-users@lists.xen.org; 
>>>>>> xen-devel@lists.xen.org; Teo
>>>> En
>>>>>> Ming (Zhang Enming)
>>>>>> Subject: Dear Ren Yongjie
>>>>>>
>>>>>> Hi Yongjie,
>>>>>>
>>>>>> I have just compiled and installed Xen 4.3-unstable
changeset 26666
>>>> and
>>>>>> Linux kernel 3.8.1, according to your specifications.
However, I
>>>>>> still
>>>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
passthrough.
>>>>>>
>>>>>> Although in Device Manager in Windows 7 HVM domU, it
says "This
>>>> device
>>>>>> is working properly" for Intel HD Graphics 4600, I
can only get 16
>>>>>> colors. Please refer to the following screenshots.
>>>>>>
>>>>>> http://i.imgur.com/zaEGys4.jpg
>>>>>>
>>>>>> http://i.imgur.com/KRZzxNZ.jpg
>>>>>>
>>>>>> http://i.imgur.com/aVyuh4W.jpg
>>>>>>
>>>>>> I have attached the relevant configuration files in
this email.
>>>>>> Please
>>>>>> check to see if there are any mistakes.
>>>>>>
>>>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
>>>>>>
>>>>>> Output of dmesg: http://pastebin.com/ixPuUnni
>>>>>>
>>>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
>>>>>>
>>>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
>>>>>>
>>>>>> Please advise. I really hope to be able to make Intel
HD Graphics
>>>>>> 4600
>>>>>> IGD VGA passthrough work successfully.
>>>>>>
>>>>> Hi Enming,
>>>>> I can''t reproduce your issue even if I use your
Dom0 and guest
>>>>> config.
>>>>> So, can you can try the following two:
>>>>> 1. use upstream Xen/Dom0 to try since that also works for
me.
>>>> Dear Yongjie,
>>>>
>>>> What do you mean by upstream Xen/Dom0? I don''t
understand.
>>>>
>>> I mean using latest Xen and Dom0 is also fine for VGA passthru.
>>> No need to use specific changeset of Xen.
>>>
>>>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
>>>> I am sorry but it is out of budget for me. I can''t buy
another cpu to
>>>> test vga passthrough.
>>>>> Best Regards,
>>>>>        Yongjie (Jay)
>>>>>
>>>> By the way, what distro and version are you using for your
dom0? Is it
>>>> Ubuntu, Debian, Mint or Fedora?
>>>>
>>> I''m using RHEL6.4. I think it doesn''t matter.
>>>
>>> Best Regards,
>>>       Yongjie (Jay)
>>>
>>
>> Dear Yongjie and Xen developers,
>>
>> I have compiled and installed the latest Xen 4.4-unstable changeset 
>> 27305 and Linux kernel 3.10.3.
>>
>> Although I did not get error code 43 for Intel HD Graphics 4600 IGD 
>> in device manager, I am still getting 16 colors only for the monitor!!!
>>
>> How can I solve this problem?
>>
>
> Hi Yongjie,
>
> I have installed Fedora 19 x86_64 as a dom0 and compiled and installed 
> Xen 4.4-unstable changeset 27305 and Linux kernel 3.10.5. Previously I 
> was using Ubuntu 12.04.2 LTS as dom0.
>
> Although I did not get error code 43 for Intel HD Graphics 4600 in 
> device manager, I am still getting only 16 colors on the display. I 
> really do not know where the problem lies. Device manager says "This 
> device is working properly.", yet I am still getting only 16 colors on
> the display.
>
> Could you share with me your /etc/grub.d/40_custom GRUB2 contents?
>
> Thank you very much.
>
Dear Yongjie,

I am not sure what went wrong but error code 43 comes back again. All I 
did was to blacklist the i915, nouveau, and snd_hda_intel kernel 
modules, rebuild the initial ramdisk, and turn off gdm. Could you tell 
me what went wrong?

Could you share with us your full GRUB2 configuration and Windows 7 HVM 
domU configuration?

Thank you very much.

-- 
Yours sincerely,

Singapore Citizen Mr. Teo En Ming (Zhang Enming)