Konrad Rzeszutek Wilk
2013-Jul-19 15:51 UTC
[PATCH] xen: Support 64-bit PV guest receiving NMIs
Zhenzhong Duan sent a patch that adds some of this functionality
but this code adds the remaining pieces. The kernel has the
logic to handle Xen-type-exceptions using the paravirt interface
in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME -
pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN -
pv_cpu_ops.iret).
That means the nmi handler (and other exception handlers) use
the hypervisor iret.
The other changes that would be neccessary for this would
be to translate the NMI_VECTOR to one of the entries on the
ipi_vector and make xen_send_IPI_mask_allbutself use different
events.
Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b
(xen: Clean up apic ipi interface) implemented this and we piggyback
on the cleanup such that the apic IPI interface will pass the right
vector value for NMI.
With this patch we can trigger NMIs within a PV guest (only tested
x86_64).
SysRq : Show backtrace of all active CPUs
sending NMI to all CPUs:
NMI backtrace for cpu 2
CPU 2
RIP: e030:[<ffffffff8100130a>] [<ffffffff8100130a>]
xen_hypercall_vcpu_op+0xa/0x20
. snip..
Call Trace:
[<ffffffff813afdc0>] ? xen_send_IPI_one+0x40/0x60
[<ffffffff8104bdcb>] __xen_send_IPI_mask+0x2b/0x50
[<ffffffff8104c6f9>] xen_send_IPI_all+0x79/0xa0
[<ffffffff81074df9>] arch_trigger_all_cpu_backtrace+0x59/0xa0
[<ffffffff813d16f9>] sysrq_handle_showallcpus+0x9/0x10
[<ffffffff813d1ad9>] __handle_sysrq+0x129/0x190
[<ffffffff813d1b40>] ? __handle_sysrq+0x190/0x190
[<ffffffff813d1ba4>] write_sysrq_trigger+0x64/0x70
[<ffffffff8121211b>] proc_reg_write+0x8b/0xe0
[<ffffffff811aa1c4>] vfs_write+0xb4/0x130
[<ffffffff811aa98a>] sys_write+0x5a/0xa0
[<ffffffff816825e9>] system_call_fastpath+0x16/0x1b
NMI backtrace for cpu 0
CPU 0
. snip..
Call Trace:
[<ffffffff81044180>] ? xen_safe_halt+0x10/0x20
[<ffffffff8105746c>] default_idle+0x3c/0x130
[<ffffffff81056cf9>] cpu_idle+0x99/0xe0
[<ffffffff816619da>] rest_init+0x8a/0xa0
[<ffffffff81ac10a4>] start_kernel+0x3da/0x3e7
[<ffffffff81ac0ae8>] ? repair_env_string+0x5b/0x5b
[<ffffffff81ac05f7>] x86_64_start_reservations+0x2a/0x2c
[<ffffffff81ac30ce>] xen_start_kernel+0x56e/0x570
NMI backtrace for cpu 1
CPU 1
RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>]
xen_hypercall_sched_op+0xa/0x20
.snip..
Call Trace:
[<ffffffff81044180>] ? xen_safe_halt+0x10/0x20
[<ffffffff8105746c>] default_idle+0x3c/0x130
[<ffffffff81056cf9>] cpu_idle+0x99/0xe0
[<ffffffff81044969>] ? xen_irq_enable_direct_reloc+0x4/0x4
[<ffffffff8166801b>] cpu_bringup_and_idle+0xe/0x10
NMI backtrace for cpu 3
CPU 3
.snip..
Call Trace:
[<ffffffff81044180>] ? xen_safe_halt+0x10/0x20
[<ffffffff8105746c>] default_idle+0x3c/0x130
[<ffffffff81056cf9>] cpu_idle+0x99/0xe0
[<ffffffff81044969>] ? xen_irq_enable_direct_reloc+0x4/0x4
[<ffffffff8166801b>] cpu_bringup_and_idle+0xe/0x10
Incidentally that means kgdb will also now work within
a PV guest without using the ''nokgdbroundup'' workaround.
Note that the 32-bit version is different and this patch
does not enable that.
CC: Lisa Nguyen <lisa@xenapiadmin.com>
CC: Ben Guthro <benjamin.guthro@citrix.com>
CC: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
arch/x86/include/asm/xen/events.h | 1 +
arch/x86/xen/enlighten.c | 13 ++++++++-----
arch/x86/xen/setup.c | 13 +++++++++++--
arch/x86/xen/smp.c | 5 +++++
drivers/xen/events.c | 11 +++++++++++
include/xen/interface/vcpu.h | 2 ++
6 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/xen/events.h
b/arch/x86/include/asm/xen/events.h
index ca842f2..608a79d 100644
--- a/arch/x86/include/asm/xen/events.h
+++ b/arch/x86/include/asm/xen/events.h
@@ -7,6 +7,7 @@ enum ipi_vector {
XEN_CALL_FUNCTION_SINGLE_VECTOR,
XEN_SPIN_UNLOCK_VECTOR,
XEN_IRQ_WORK_VECTOR,
+ XEN_NMI_VECTOR,
XEN_NR_IPIS,
};
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 2fa02bc..231382a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -427,8 +427,7 @@ static void __init xen_init_cpuid_mask(void)
if (!xen_initial_domain())
cpuid_leaf1_edx_mask &- ~((1 << X86_FEATURE_APIC) | /* disable
local APIC */
- (1 << X86_FEATURE_ACPI)); /* disable ACPI */
+ ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */
cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32));
@@ -735,8 +734,7 @@ static int cvt_gate_to_trap(int vector, const gate_desc
*val,
addr = (unsigned long)xen_int3;
else if (addr == (unsigned long)stack_segment)
addr = (unsigned long)xen_stack_segment;
- else if (addr == (unsigned long)double_fault ||
- addr == (unsigned long)nmi) {
+ else if (addr == (unsigned long)double_fault) {
/* Don''t need to handle these */
return 0;
#ifdef CONFIG_X86_MCE
@@ -747,7 +745,12 @@ static int cvt_gate_to_trap(int vector, const gate_desc
*val,
*/
;
#endif
- } else {
+ } else if (addr == (unsigned long)nmi)
+ /*
+ * Use the native version as well.
+ */
+ ;
+ else {
/* Some other trap using IST? */
if (WARN_ON(val->ist != 0))
return 0;
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 94eac5c..f78877c 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -33,6 +33,9 @@
/* These are code, but not functions. Defined in entry.S */
extern const char xen_hypervisor_callback[];
extern const char xen_failsafe_callback[];
+#ifdef CONFIG_X86_64
+extern const char nmi[];
+#endif
extern void xen_sysenter_target(void);
extern void xen_syscall_target(void);
extern void xen_syscall32_target(void);
@@ -525,7 +528,13 @@ void __cpuinit xen_enable_syscall(void)
}
#endif /* CONFIG_X86_64 */
}
-
+void __cpuinit xen_enable_nmi(void)
+{
+#ifdef CONFIG_X86_64
+ if (register_callback(CALLBACKTYPE_nmi, nmi))
+ BUG();
+#endif
+}
void __init xen_arch_setup(void)
{
xen_panic_handler_init();
@@ -543,7 +552,7 @@ void __init xen_arch_setup(void)
xen_enable_sysenter();
xen_enable_syscall();
-
+ xen_enable_nmi();
#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index c1367b2..d792cce 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -572,6 +572,10 @@ static inline int xen_map_vector(int vector)
case IRQ_WORK_VECTOR:
xen_vector = XEN_IRQ_WORK_VECTOR;
break;
+ case NMI_VECTOR:
+ case APIC_DM_NMI:
+ xen_vector = XEN_NMI_VECTOR;
+ break;
default:
xen_vector = -1;
printk(KERN_ERR "xen: vector 0x%x is not implemented\n",
@@ -659,6 +663,7 @@ static irqreturn_t xen_irq_work_interrupt(int irq, void
*dev_id)
return IRQ_HANDLED;
}
+
static const struct smp_ops xen_smp_ops __initconst = {
.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
.smp_prepare_cpus = xen_smp_prepare_cpus,
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index a58ac43..419cc44 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -56,6 +56,7 @@
#include <xen/interface/hvm/params.h>
#include <xen/interface/physdev.h>
#include <xen/interface/sched.h>
+#include <xen/interface/vcpu.h>
#include <asm/hw_irq.h>
/*
@@ -1213,6 +1214,16 @@ EXPORT_SYMBOL_GPL(evtchn_put);
void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector)
{
int irq = per_cpu(ipi_to_irq, cpu)[vector];
+
+ /*
+ * In which the IRQ will be -1.
+ */
+ if (unlikely(vector == XEN_NMI_VECTOR)) {
+ int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL);
+ if (rc < 0)
+ printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu,
rc);
+ return;
+ }
BUG_ON(irq < 0);
notify_remote_via_irq(irq);
}
diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h
index 87e6f8a..b05288c 100644
--- a/include/xen/interface/vcpu.h
+++ b/include/xen/interface/vcpu.h
@@ -170,4 +170,6 @@ struct vcpu_register_vcpu_info {
};
DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info);
+/* Send an NMI to the specified VCPU. @extra_arg == NULL. */
+#define VCPUOP_send_nmi 11
#endif /* __XEN_PUBLIC_VCPU_H__ */
--
1.7.7.6
On 07/19/2013 11:51 AM, Konrad Rzeszutek Wilk wrote:> Zhenzhong Duan sent a patch that adds some of this functionality > but this code adds the remaining pieces. The kernel has the > logic to handle Xen-type-exceptions using the paravirt interface > in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME - > pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN - > pv_cpu_ops.iret). > > That means the nmi handler (and other exception handlers) use > the hypervisor iret. > > The other changes that would be neccessary for this would > be to translate the NMI_VECTOR to one of the entries on the > ipi_vector and make xen_send_IPI_mask_allbutself use different > events. > > Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b > (xen: Clean up apic ipi interface) implemented this and we piggyback > on the cleanup such that the apic IPI interface will pass the right > vector value for NMI. > > With this patch we can trigger NMIs within a PV guest (only tested > x86_64). > > SysRq : Show backtrace of all active CPUs > sending NMI to all CPUs: > NMI backtrace for cpu 2 > CPU 2 > RIP: e030:[<ffffffff8100130a>] [<ffffffff8100130a>] xen_hypercall_vcpu_op+0xa/0x20 > . snip.. > Call Trace: > [<ffffffff813afdc0>] ? xen_send_IPI_one+0x40/0x60 > [<ffffffff8104bdcb>] __xen_send_IPI_mask+0x2b/0x50 > [<ffffffff8104c6f9>] xen_send_IPI_all+0x79/0xa0 > [<ffffffff81074df9>] arch_trigger_all_cpu_backtrace+0x59/0xa0 > [<ffffffff813d16f9>] sysrq_handle_showallcpus+0x9/0x10 > [<ffffffff813d1ad9>] __handle_sysrq+0x129/0x190 > [<ffffffff813d1b40>] ? __handle_sysrq+0x190/0x190 > [<ffffffff813d1ba4>] write_sysrq_trigger+0x64/0x70 > [<ffffffff8121211b>] proc_reg_write+0x8b/0xe0 > [<ffffffff811aa1c4>] vfs_write+0xb4/0x130 > [<ffffffff811aa98a>] sys_write+0x5a/0xa0 > [<ffffffff816825e9>] system_call_fastpath+0x16/0x1b > NMI backtrace for cpu 0 > CPU 0 > . snip.. > Call Trace: > [<ffffffff81044180>] ? xen_safe_halt+0x10/0x20 > [<ffffffff8105746c>] default_idle+0x3c/0x130 > [<ffffffff81056cf9>] cpu_idle+0x99/0xe0 > [<ffffffff816619da>] rest_init+0x8a/0xa0 > [<ffffffff81ac10a4>] start_kernel+0x3da/0x3e7 > [<ffffffff81ac0ae8>] ? repair_env_string+0x5b/0x5b > [<ffffffff81ac05f7>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ac30ce>] xen_start_kernel+0x56e/0x570 > NMI backtrace for cpu 1 > CPU 1 > RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 > .snip.. > Call Trace: > [<ffffffff81044180>] ? xen_safe_halt+0x10/0x20 > [<ffffffff8105746c>] default_idle+0x3c/0x130 > [<ffffffff81056cf9>] cpu_idle+0x99/0xe0 > [<ffffffff81044969>] ? xen_irq_enable_direct_reloc+0x4/0x4 > [<ffffffff8166801b>] cpu_bringup_and_idle+0xe/0x10 > NMI backtrace for cpu 3 > CPU 3 > .snip.. > Call Trace: > [<ffffffff81044180>] ? xen_safe_halt+0x10/0x20 > [<ffffffff8105746c>] default_idle+0x3c/0x130 > [<ffffffff81056cf9>] cpu_idle+0x99/0xe0 > [<ffffffff81044969>] ? xen_irq_enable_direct_reloc+0x4/0x4 > [<ffffffff8166801b>] cpu_bringup_and_idle+0xe/0x10 > > Incidentally that means kgdb will also now work within > a PV guest without using the ''nokgdbroundup'' workaround. > > Note that the 32-bit version is different and this patch > does not enable that. > > CC: Lisa Nguyen <lisa@xenapiadmin.com> > CC: Ben Guthro <benjamin.guthro@citrix.com> > CC: Zhenzhong Duan <zhenzhong.duan@oracle.com> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>Looks good to me. Reviewed-by: Ben Guthro <benjamin.guthro@citrix.com>> --- > arch/x86/include/asm/xen/events.h | 1 + > arch/x86/xen/enlighten.c | 13 ++++++++----- > arch/x86/xen/setup.c | 13 +++++++++++-- > arch/x86/xen/smp.c | 5 +++++ > drivers/xen/events.c | 11 +++++++++++ > include/xen/interface/vcpu.h | 2 ++ > 6 files changed, 38 insertions(+), 7 deletions(-) > > diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h > index ca842f2..608a79d 100644 > --- a/arch/x86/include/asm/xen/events.h > +++ b/arch/x86/include/asm/xen/events.h > @@ -7,6 +7,7 @@ enum ipi_vector { > XEN_CALL_FUNCTION_SINGLE_VECTOR, > XEN_SPIN_UNLOCK_VECTOR, > XEN_IRQ_WORK_VECTOR, > + XEN_NMI_VECTOR, > > XEN_NR_IPIS, > }; > diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c > index 2fa02bc..231382a 100644 > --- a/arch/x86/xen/enlighten.c > +++ b/arch/x86/xen/enlighten.c > @@ -427,8 +427,7 @@ static void __init xen_init_cpuid_mask(void) > > if (!xen_initial_domain()) > cpuid_leaf1_edx_mask &> - ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ > - (1 << X86_FEATURE_ACPI)); /* disable ACPI */ > + ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */ > > cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32)); > > @@ -735,8 +734,7 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, > addr = (unsigned long)xen_int3; > else if (addr == (unsigned long)stack_segment) > addr = (unsigned long)xen_stack_segment; > - else if (addr == (unsigned long)double_fault || > - addr == (unsigned long)nmi) { > + else if (addr == (unsigned long)double_fault) { > /* Don''t need to handle these */ > return 0; > #ifdef CONFIG_X86_MCE > @@ -747,7 +745,12 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, > */ > ; > #endif > - } else { > + } else if (addr == (unsigned long)nmi) > + /* > + * Use the native version as well. > + */ > + ; > + else { > /* Some other trap using IST? */ > if (WARN_ON(val->ist != 0)) > return 0; > diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c > index 94eac5c..f78877c 100644 > --- a/arch/x86/xen/setup.c > +++ b/arch/x86/xen/setup.c > @@ -33,6 +33,9 @@ > /* These are code, but not functions. Defined in entry.S */ > extern const char xen_hypervisor_callback[]; > extern const char xen_failsafe_callback[]; > +#ifdef CONFIG_X86_64 > +extern const char nmi[]; > +#endif > extern void xen_sysenter_target(void); > extern void xen_syscall_target(void); > extern void xen_syscall32_target(void); > @@ -525,7 +528,13 @@ void __cpuinit xen_enable_syscall(void) > } > #endif /* CONFIG_X86_64 */ > } > - > +void __cpuinit xen_enable_nmi(void) > +{ > +#ifdef CONFIG_X86_64 > + if (register_callback(CALLBACKTYPE_nmi, nmi)) > + BUG(); > +#endif > +} > void __init xen_arch_setup(void) > { > xen_panic_handler_init(); > @@ -543,7 +552,7 @@ void __init xen_arch_setup(void) > > xen_enable_sysenter(); > xen_enable_syscall(); > - > + xen_enable_nmi(); > #ifdef CONFIG_ACPI > if (!(xen_start_info->flags & SIF_INITDOMAIN)) { > printk(KERN_INFO "ACPI in unprivileged domain disabled\n"); > diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c > index c1367b2..d792cce 100644 > --- a/arch/x86/xen/smp.c > +++ b/arch/x86/xen/smp.c > @@ -572,6 +572,10 @@ static inline int xen_map_vector(int vector) > case IRQ_WORK_VECTOR: > xen_vector = XEN_IRQ_WORK_VECTOR; > break; > + case NMI_VECTOR: > + case APIC_DM_NMI: > + xen_vector = XEN_NMI_VECTOR; > + break; > default: > xen_vector = -1; > printk(KERN_ERR "xen: vector 0x%x is not implemented\n", > @@ -659,6 +663,7 @@ static irqreturn_t xen_irq_work_interrupt(int irq, void *dev_id) > return IRQ_HANDLED; > } > > + > static const struct smp_ops xen_smp_ops __initconst = { > .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu, > .smp_prepare_cpus = xen_smp_prepare_cpus, > diff --git a/drivers/xen/events.c b/drivers/xen/events.c > index a58ac43..419cc44 100644 > --- a/drivers/xen/events.c > +++ b/drivers/xen/events.c > @@ -56,6 +56,7 @@ > #include <xen/interface/hvm/params.h> > #include <xen/interface/physdev.h> > #include <xen/interface/sched.h> > +#include <xen/interface/vcpu.h> > #include <asm/hw_irq.h> > > /* > @@ -1213,6 +1214,16 @@ EXPORT_SYMBOL_GPL(evtchn_put); > void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) > { > int irq = per_cpu(ipi_to_irq, cpu)[vector]; > + > + /* > + * In which the IRQ will be -1. > + */ > + if (unlikely(vector == XEN_NMI_VECTOR)) { > + int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); > + if (rc < 0) > + printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); > + return; > + } > BUG_ON(irq < 0); > notify_remote_via_irq(irq); > } > diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h > index 87e6f8a..b05288c 100644 > --- a/include/xen/interface/vcpu.h > +++ b/include/xen/interface/vcpu.h > @@ -170,4 +170,6 @@ struct vcpu_register_vcpu_info { > }; > DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info); > > +/* Send an NMI to the specified VCPU. @extra_arg == NULL. */ > +#define VCPUOP_send_nmi 11 > #endif /* __XEN_PUBLIC_VCPU_H__ */ >
David Vrabel
2013-Jul-22 12:15 UTC
Re: [PATCH] xen: Support 64-bit PV guest receiving NMIs
On 19/07/13 16:51, Konrad Rzeszutek Wilk wrote:> Zhenzhong Duan sent a patch that adds some of this functionality > but this code adds the remaining pieces.What''s this actually referring to? Which specific commits?> The kernel has the > logic to handle Xen-type-exceptions using the paravirt interface > in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME - > pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN - > pv_cpu_ops.iret). > > That means the nmi handler (and other exception handlers) use > the hypervisor iret. > > The other changes that would be neccessary for this would > be to translate the NMI_VECTOR to one of the entries on the > ipi_vector and make xen_send_IPI_mask_allbutself use different > events. > > Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b > (xen: Clean up apic ipi interface) implemented this and we piggyback > on the cleanup such that the apic IPI interface will pass the right > vector value for NMI. > > With this patch we can trigger NMIs within a PV guest (only tested > x86_64).I think you also need to test with 32-bit guests. The VCPUOP_nmi hypercall does not appear to be conditional on only 64-bit guest.> > SysRq : Show backtrace of all active CPUs > sending NMI to all CPUs: > NMI backtrace for cpu 2Is this clutter really necessary in a commit message?> --- a/arch/x86/include/asm/xen/events.h > +++ b/arch/x86/include/asm/xen/events.h > @@ -7,6 +7,7 @@ enum ipi_vector { > XEN_CALL_FUNCTION_SINGLE_VECTOR, > XEN_SPIN_UNLOCK_VECTOR, > XEN_IRQ_WORK_VECTOR, > + XEN_NMI_VECTOR, > > XEN_NR_IPIS, > }; > diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c > index 2fa02bc..231382a 100644 > --- a/arch/x86/xen/enlighten.c > +++ b/arch/x86/xen/enlighten.c > @@ -427,8 +427,7 @@ static void __init xen_init_cpuid_mask(void) > > if (!xen_initial_domain()) > cpuid_leaf1_edx_mask &> - ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ > - (1 << X86_FEATURE_ACPI)); /* disable ACPI */ > + ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */ > > cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32));What''s this hunk for? It doesn''t appear to be explained in the commit message.> @@ -735,8 +734,7 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, > addr = (unsigned long)xen_int3; > else if (addr == (unsigned long)stack_segment) > addr = (unsigned long)xen_stack_segment; > - else if (addr == (unsigned long)double_fault || > - addr == (unsigned long)nmi) { > + else if (addr == (unsigned long)double_fault) { > /* Don''t need to handle these */ > return 0; > #ifdef CONFIG_X86_MCE > @@ -747,7 +745,12 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, > */ > ; > #endif > - } else { > + } else if (addr == (unsigned long)nmi) > + /* > + * Use the native version as well. > + */ > + ; > + else { > /* Some other trap using IST? */ > if (WARN_ON(val->ist != 0)) > return 0; > diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c > index 94eac5c..f78877c 100644 > --- a/arch/x86/xen/setup.c > +++ b/arch/x86/xen/setup.c > @@ -33,6 +33,9 @@ > /* These are code, but not functions. Defined in entry.S */ > extern const char xen_hypervisor_callback[]; > extern const char xen_failsafe_callback[]; > +#ifdef CONFIG_X86_64 > +extern const char nmi[]; > +#endif > extern void xen_sysenter_target(void); > extern void xen_syscall_target(void); > extern void xen_syscall32_target(void); > @@ -525,7 +528,13 @@ void __cpuinit xen_enable_syscall(void) > } > #endif /* CONFIG_X86_64 */ > } > - > +void __cpuinit xen_enable_nmi(void) > +{ > +#ifdef CONFIG_X86_64 > + if (register_callback(CALLBACKTYPE_nmi, nmi)) > + BUG(); > +#endif > +} > void __init xen_arch_setup(void)Do we care about hypervisors that don''t support this? Also, missing blank line.> --- a/arch/x86/xen/smp.c > +++ b/arch/x86/xen/smp.c > @@ -572,6 +572,10 @@ static inline int xen_map_vector(int vector) > case IRQ_WORK_VECTOR: > xen_vector = XEN_IRQ_WORK_VECTOR; > break; > + case NMI_VECTOR: > + case APIC_DM_NMI:Not clear what this APIC_DM_NMI case is for.> + xen_vector = XEN_NMI_VECTOR; > + break; > default: > xen_vector = -1; > printk(KERN_ERR "xen: vector 0x%x is not implemented\n", > @@ -659,6 +663,7 @@ static irqreturn_t xen_irq_work_interrupt(int irq, void *dev_id) > return IRQ_HANDLED; > } > > +Stray blank line added.> static const struct smp_ops xen_smp_ops __initconst = { > .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu, > .smp_prepare_cpus = xen_smp_prepare_cpus, > diff --git a/drivers/xen/events.c b/drivers/xen/events.c > index a58ac43..419cc44 100644> --- a/drivers/xen/events.c > +++ b/drivers/xen/events.c > @@ -1213,6 +1214,16 @@ EXPORT_SYMBOL_GPL(evtchn_put); > void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) > { > int irq = per_cpu(ipi_to_irq, cpu)[vector]; > + > + /* > + * In which the IRQ will be -1. > + */ > + if (unlikely(vector == XEN_NMI_VECTOR)) { > + int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); > + if (rc < 0) > + printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); > + return; > + }Move the assignment of irq after this block, then you can drop the (unhelpful) comment.> --- a/include/xen/interface/vcpu.h > +++ b/include/xen/interface/vcpu.h > @@ -170,4 +170,6 @@ struct vcpu_register_vcpu_info { > }; > DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info); > > +/* Send an NMI to the specified VCPU. @extra_arg == NULL. */ > +#define VCPUOP_send_nmi 11 > #endif /* __XEN_PUBLIC_VCPU_H__ */Would it be better to get this change with a full sync of the header as a separate patch. David
Konrad Rzeszutek Wilk
2013-Jul-22 14:48 UTC
Re: [PATCH] xen: Support 64-bit PV guest receiving NMIs
On Mon, Jul 22, 2013 at 01:15:17PM +0100, David Vrabel wrote:> On 19/07/13 16:51, Konrad Rzeszutek Wilk wrote: > > Zhenzhong Duan sent a patch that adds some of this functionality > > but this code adds the remaining pieces. > > What''s this actually referring to? Which specific commits?There were no commits. Let me rephrase it.> > > The kernel has the > > logic to handle Xen-type-exceptions using the paravirt interface > > in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME - > > pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN - > > pv_cpu_ops.iret). > > > > That means the nmi handler (and other exception handlers) use > > the hypervisor iret. > > > > The other changes that would be neccessary for this would > > be to translate the NMI_VECTOR to one of the entries on the > > ipi_vector and make xen_send_IPI_mask_allbutself use different > > events. > > > > Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b > > (xen: Clean up apic ipi interface) implemented this and we piggyback > > on the cleanup such that the apic IPI interface will pass the right > > vector value for NMI. > > > > With this patch we can trigger NMIs within a PV guest (only tested > > x86_64). > > I think you also need to test with 32-bit guests. The VCPUOP_nmi > hypercall does not appear to be conditional on only 64-bit guest.Hm, perhaps add a #ifdef CONFIG for that then.> > > > > SysRq : Show backtrace of all active CPUs > > sending NMI to all CPUs: > > NMI backtrace for cpu 2 > > Is this clutter really necessary in a commit message?I will snip it a bit.> > > --- a/arch/x86/include/asm/xen/events.h > > +++ b/arch/x86/include/asm/xen/events.h > > @@ -7,6 +7,7 @@ enum ipi_vector { > > XEN_CALL_FUNCTION_SINGLE_VECTOR, > > XEN_SPIN_UNLOCK_VECTOR, > > XEN_IRQ_WORK_VECTOR, > > + XEN_NMI_VECTOR, > > > > XEN_NR_IPIS, > > }; > > diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c > > index 2fa02bc..231382a 100644 > > --- a/arch/x86/xen/enlighten.c > > +++ b/arch/x86/xen/enlighten.c > > @@ -427,8 +427,7 @@ static void __init xen_init_cpuid_mask(void) > > > > if (!xen_initial_domain()) > > cpuid_leaf1_edx_mask &> > - ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ > > - (1 << X86_FEATURE_ACPI)); /* disable ACPI */ > > + ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */ > > > > cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32)); > > What''s this hunk for? It doesn''t appear to be explained in the commit > message.Duh. Let me add a comment saying that for PV domU guests we need the ''local APIC'' functionality on to be able to send NMIs.> > > @@ -735,8 +734,7 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, > > addr = (unsigned long)xen_int3; > > else if (addr == (unsigned long)stack_segment) > > addr = (unsigned long)xen_stack_segment; > > - else if (addr == (unsigned long)double_fault || > > - addr == (unsigned long)nmi) { > > + else if (addr == (unsigned long)double_fault) { > > /* Don''t need to handle these */ > > return 0; > > #ifdef CONFIG_X86_MCE > > @@ -747,7 +745,12 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, > > */ > > ; > > #endif > > - } else { > > + } else if (addr == (unsigned long)nmi) > > + /* > > + * Use the native version as well. > > + */ > > + ; > > + else { > > /* Some other trap using IST? */ > > if (WARN_ON(val->ist != 0)) > > return 0; > > diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c > > index 94eac5c..f78877c 100644 > > --- a/arch/x86/xen/setup.c > > +++ b/arch/x86/xen/setup.c > > @@ -33,6 +33,9 @@ > > /* These are code, but not functions. Defined in entry.S */ > > extern const char xen_hypervisor_callback[]; > > extern const char xen_failsafe_callback[]; > > +#ifdef CONFIG_X86_64 > > +extern const char nmi[]; > > +#endif > > extern void xen_sysenter_target(void); > > extern void xen_syscall_target(void); > > extern void xen_syscall32_target(void); > > @@ -525,7 +528,13 @@ void __cpuinit xen_enable_syscall(void) > > } > > #endif /* CONFIG_X86_64 */ > > } > > - > > +void __cpuinit xen_enable_nmi(void) > > +{ > > +#ifdef CONFIG_X86_64 > > + if (register_callback(CALLBACKTYPE_nmi, nmi)) > > + BUG(); > > +#endif > > +} > > void __init xen_arch_setup(void) > > Do we care about hypervisors that don''t support this?What version of them would that be ? Anything prior to 3.4 cannot boot with the Linux pvops.> > Also, missing blank line. > > > --- a/arch/x86/xen/smp.c > > +++ b/arch/x86/xen/smp.c > > @@ -572,6 +572,10 @@ static inline int xen_map_vector(int vector) > > case IRQ_WORK_VECTOR: > > xen_vector = XEN_IRQ_WORK_VECTOR; > > break; > > + case NMI_VECTOR: > > + case APIC_DM_NMI: > > Not clear what this APIC_DM_NMI case is for.It is used in ''kgdb_roundup_cpus'' and if you look in __prepare_ICR the NMI_VECTOR translates that to APIC_DM_NMI. Hm, it looks like a bug in the kgdb_roundup_cpus to actually use that - it should use NMI_VECTOR I think.> > > + xen_vector = XEN_NMI_VECTOR; > > + break; > > default: > > xen_vector = -1; > > printk(KERN_ERR "xen: vector 0x%x is not implemented\n", > > @@ -659,6 +663,7 @@ static irqreturn_t xen_irq_work_interrupt(int irq, void *dev_id) > > return IRQ_HANDLED; > > } > > > > + > > Stray blank line added. > > > static const struct smp_ops xen_smp_ops __initconst = { > > .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu, > > .smp_prepare_cpus = xen_smp_prepare_cpus, > > diff --git a/drivers/xen/events.c b/drivers/xen/events.c > > index a58ac43..419cc44 100644 > > > --- a/drivers/xen/events.c > > +++ b/drivers/xen/events.c > > @@ -1213,6 +1214,16 @@ EXPORT_SYMBOL_GPL(evtchn_put); > > void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) > > { > > int irq = per_cpu(ipi_to_irq, cpu)[vector]; > > + > > + /* > > + * In which the IRQ will be -1. > > + */ > > + if (unlikely(vector == XEN_NMI_VECTOR)) { > > + int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); > > + if (rc < 0) > > + printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); > > + return; > > + } > > Move the assignment of irq after this block, then you can drop the > (unhelpful) comment.I guess? I was thinking it would be helpfull to know if it does not work.> > > --- a/include/xen/interface/vcpu.h > > +++ b/include/xen/interface/vcpu.h > > @@ -170,4 +170,6 @@ struct vcpu_register_vcpu_info { > > }; > > DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info); > > > > +/* Send an NMI to the specified VCPU. @extra_arg == NULL. */ > > +#define VCPUOP_send_nmi 11 > > #endif /* __XEN_PUBLIC_VCPU_H__ */ > > Would it be better to get this change with a full sync of the header as > a separate patch.Nah, lets keep it change by change. It makes it easier to figure out what is actually supported.> > David
David Vrabel
2013-Jul-22 15:26 UTC
Re: [PATCH] xen: Support 64-bit PV guest receiving NMIs
On 22/07/13 15:48, Konrad Rzeszutek Wilk wrote:> On Mon, Jul 22, 2013 at 01:15:17PM +0100, David Vrabel wrote: >> On 19/07/13 16:51, Konrad Rzeszutek Wilk wrote:[...]> What version of them would that be ? Anything prior to 3.4 cannot > boot with the Linux pvops.Ok. 3.4 has all the required functionality.>>> --- a/drivers/xen/events.c >>> +++ b/drivers/xen/events.c >>> @@ -1213,6 +1214,16 @@ EXPORT_SYMBOL_GPL(evtchn_put); >>> void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) >>> { >>> int irq = per_cpu(ipi_to_irq, cpu)[vector]; >>> + >>> + /* >>> + * In which the IRQ will be -1. >>> + */ >>> + if (unlikely(vector == XEN_NMI_VECTOR)) { >>> + int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); >>> + if (rc < 0) >>> + printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); >>> + return; >>> + } >> >> Move the assignment of irq after this block, then you can drop the >> (unhelpful) comment. > > I guess? I was thinking it would be helpfull to know if it does not work.I meant the comment not the printk. e.g., { int irq; if (unlikely(vector == XEN_NMI_VECTOR)) { int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); if (rc < 0) printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); return; } irq = per_cpu(ipi_to_irq, cpu)[vector]; ... David
Konrad Rzeszutek Wilk
2013-Jul-31 17:32 UTC
Re: [PATCH] xen: Support 64-bit PV guest receiving NMIs
On Mon, Jul 22, 2013 at 04:26:47PM +0100, David Vrabel wrote:> On 22/07/13 15:48, Konrad Rzeszutek Wilk wrote: > > On Mon, Jul 22, 2013 at 01:15:17PM +0100, David Vrabel wrote: > >> On 19/07/13 16:51, Konrad Rzeszutek Wilk wrote: > [...] > > > What version of them would that be ? Anything prior to 3.4 cannot > > boot with the Linux pvops. > > Ok. 3.4 has all the required functionality. > > >>> --- a/drivers/xen/events.c > >>> +++ b/drivers/xen/events.c > >>> @@ -1213,6 +1214,16 @@ EXPORT_SYMBOL_GPL(evtchn_put); > >>> void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) > >>> { > >>> int irq = per_cpu(ipi_to_irq, cpu)[vector]; > >>> + > >>> + /* > >>> + * In which the IRQ will be -1. > >>> + */ > >>> + if (unlikely(vector == XEN_NMI_VECTOR)) { > >>> + int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); > >>> + if (rc < 0) > >>> + printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); > >>> + return; > >>> + } > >> > >> Move the assignment of irq after this block, then you can drop the > >> (unhelpful) comment. > > > > I guess? I was thinking it would be helpfull to know if it does not work.I think this has all the comments addressed. From 8da43d6b13138f97a32f90ea2db713d139b3535b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk <konrad@kernel.org> Date: Fri, 19 Jul 2013 11:51:31 -0400 Subject: [PATCH] xen: Support 64-bit PV guest receiving NMIs This is based on a patch that Zhenzhong Duan sent a patch - which was missing some of the remaining pieces. The kernel has the logic to handle Xen-type-exceptions using the paravirt interface in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME - pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN - pv_cpu_ops.iret). That means the nmi handler (and other exception handlers) use the hypervisor iret. The other changes that would be neccessary for this would be to translate the NMI_VECTOR to one of the entries on the ipi_vector and make xen_send_IPI_mask_allbutself use different events. Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b (xen: Clean up apic ipi interface) implemented this and we piggyback on the cleanup such that the apic IPI interface will pass the right vector value for NMI. With this patch we can trigger NMIs within a PV guest (only tested x86_64). For this to work with normal PV guests (not initial domain) we need the domain to be able to use the APIC ops - they are already implemented to use the Xen event channels. For that to be turned on in a PV domU we need to remove the masking of X86_FEATURE_APIC. Incidentally that means kgdb will also now work within a PV guest without using the ''nokgdbroundup'' workaround. Note that the 32-bit version is different and this patch does not enable that. CC: Lisa Nguyen <lisa@xenapiadmin.com> CC: Ben Guthro <benjamin.guthro@citrix.com> CC: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Fixed up per David Vrabel comments] Reviewed-by: Ben Guthro <benjamin.guthro@citrix.com> --- arch/x86/include/asm/xen/events.h | 1 + arch/x86/xen/enlighten.c | 13 ++++++++----- arch/x86/xen/setup.c | 13 +++++++++++-- arch/x86/xen/smp.c | 6 ++++++ drivers/xen/events.c | 11 ++++++++++- include/xen/interface/vcpu.h | 2 ++ 6 files changed, 38 insertions(+), 8 deletions(-) diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h index ca842f2..608a79d 100644 --- a/arch/x86/include/asm/xen/events.h +++ b/arch/x86/include/asm/xen/events.h @@ -7,6 +7,7 @@ enum ipi_vector { XEN_CALL_FUNCTION_SINGLE_VECTOR, XEN_SPIN_UNLOCK_VECTOR, XEN_IRQ_WORK_VECTOR, + XEN_NMI_VECTOR, XEN_NR_IPIS, }; diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 193097e..b5a22fa 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -427,8 +427,7 @@ static void __init xen_init_cpuid_mask(void) if (!xen_initial_domain()) cpuid_leaf1_edx_mask &- ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ - (1 << X86_FEATURE_ACPI)); /* disable ACPI */ + ~((1 << X86_FEATURE_ACPI)); /* disable ACPI */ cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32)); @@ -735,8 +734,7 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, addr = (unsigned long)xen_int3; else if (addr == (unsigned long)stack_segment) addr = (unsigned long)xen_stack_segment; - else if (addr == (unsigned long)double_fault || - addr == (unsigned long)nmi) { + else if (addr == (unsigned long)double_fault) { /* Don''t need to handle these */ return 0; #ifdef CONFIG_X86_MCE @@ -747,7 +745,12 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val, */ ; #endif - } else { + } else if (addr == (unsigned long)nmi) + /* + * Use the native version as well. + */ + ; + else { /* Some other trap using IST? */ if (WARN_ON(val->ist != 0)) return 0; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 056d11f..403f5cc 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -33,6 +33,9 @@ /* These are code, but not functions. Defined in entry.S */ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +#ifdef CONFIG_X86_64 +extern const char nmi[]; +#endif extern void xen_sysenter_target(void); extern void xen_syscall_target(void); extern void xen_syscall32_target(void); @@ -525,7 +528,13 @@ void xen_enable_syscall(void) } #endif /* CONFIG_X86_64 */ } - +void __cpuinit xen_enable_nmi(void) +{ +#ifdef CONFIG_X86_64 + if (register_callback(CALLBACKTYPE_nmi, nmi)) + BUG(); +#endif +} void __init xen_arch_setup(void) { xen_panic_handler_init(); @@ -543,7 +552,7 @@ void __init xen_arch_setup(void) xen_enable_sysenter(); xen_enable_syscall(); - + xen_enable_nmi(); #ifdef CONFIG_ACPI if (!(xen_start_info->flags & SIF_INITDOMAIN)) { printk(KERN_INFO "ACPI in unprivileged domain disabled\n"); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index ca92754..22759c6 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -572,6 +572,12 @@ static inline int xen_map_vector(int vector) case IRQ_WORK_VECTOR: xen_vector = XEN_IRQ_WORK_VECTOR; break; +#ifdef CONFIG_X86_64 + case NMI_VECTOR: + case APIC_DM_NMI: /* Some use that instead of NMI_VECTOR */ + xen_vector = XEN_NMI_VECTOR; + break; +#endif default: xen_vector = -1; printk(KERN_ERR "xen: vector 0x%x is not implemented\n", diff --git a/drivers/xen/events.c b/drivers/xen/events.c index a58ac43..c8b9d9f 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -56,6 +56,7 @@ #include <xen/interface/hvm/params.h> #include <xen/interface/physdev.h> #include <xen/interface/sched.h> +#include <xen/interface/vcpu.h> #include <asm/hw_irq.h> /* @@ -1212,7 +1213,15 @@ EXPORT_SYMBOL_GPL(evtchn_put); void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) { - int irq = per_cpu(ipi_to_irq, cpu)[vector]; + int irq; + + if (unlikely(vector == XEN_NMI_VECTOR)) { + int rc = HYPERVISOR_vcpu_op(VCPUOP_send_nmi, cpu, NULL); + if (rc < 0) + printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); + return; + } + irq = per_cpu(ipi_to_irq, cpu)[vector]; BUG_ON(irq < 0); notify_remote_via_irq(irq); } diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h index 87e6f8a..b05288c 100644 --- a/include/xen/interface/vcpu.h +++ b/include/xen/interface/vcpu.h @@ -170,4 +170,6 @@ struct vcpu_register_vcpu_info { }; DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info); +/* Send an NMI to the specified VCPU. @extra_arg == NULL. */ +#define VCPUOP_send_nmi 11 #endif /* __XEN_PUBLIC_VCPU_H__ */ -- 1.7.7.6
David Vrabel
2013-Aug-01 12:11 UTC
Re: [PATCH] xen: Support 64-bit PV guest receiving NMIs
On 31/07/13 18:32, Konrad Rzeszutek Wilk wrote:> > From 8da43d6b13138f97a32f90ea2db713d139b3535b Mon Sep 17 00:00:00 2001 > From: Konrad Rzeszutek Wilk <konrad@kernel.org> > Date: Fri, 19 Jul 2013 11:51:31 -0400 > Subject: [PATCH] xen: Support 64-bit PV guest receiving NMIs > > This is based on a patch that Zhenzhong Duan sent a patch - whichGarbled grammer. Otherwise, Reviewed-by: David Vrabel <david.vrabel@citrix.com> David