Konrad Rzeszutek Wilk
2013-Feb-23 01:18 UTC
Regression introduced with 14e568e78f6f80ca1e27256641ddf524c7dbdc51 (stop_machine: Use smpboot threads)
Hey Thomas,
I don''t know if this is b/c the Xen code is missing something or
expects something that never happend. I hadn''t looked at your
patch in any detail (was going to do that on Monday).
Either way, if I boot a HVM guest with PV extensions (aka PVHVM)
this is I what get:
Loading
initramf.gz.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ready.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0upstream-06472-g6661875-dirty
(konrad@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC)
) #1 SMP Fri Feb 22 20:00:54 EST 2013
[ 0.000000] Command line: initrd=initramf.gz console=ttyS0,115200
test=netstatic nofb sleep BOOT_IMAGE=vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.2.
[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for
this kernel: unplug emulated NICs.
[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for
this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at
[ffff8800000fbba0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x3a000000-0x3a1c8fff]
[ 0.000000] init_memory_mapping: [mem 0x38000000-0x39ffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x37ffffff]
[ 0.000000] init_memory_mapping: [mem 0x3a1c9000-0x3f7fffff]
[ 0.000000] RAMDISK: [mem 0x3a1c9000-0x3f7defff]
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc010140 00054 (v01 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc00fe00 000F4 (v04 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc004180 0BBF6 (v02 Xen HVM 00000000
INTL 20100528)
[ 0.000000] ACPI: FACS 00000000fc004140 00040
[ 0.000000] ACPI: APIC 00000000fc00ff00 000D8 (v02 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: HPET 00000000fc010050 00038 (v01 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: WAET 00000000fc010090 00028 (v01 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: SSDT 00000000fc0100c0 00031 (v02 Xen HVM 00000000
INTL 20100528)
[ 0.000000] ACPI: SSDT 00000000fc010100 00031 (v02 Xen HVM 00000000
INTL 20100528)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3f7fffff]
[ 0.000000] NODE_DATA [mem 0x3f7fc000-0x3f7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f7fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 15 CPUs, 13 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0x3f800000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880039e00000 s84928 r8192
d21568 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 256420
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=initramf.gz console=ttyS0,115200
test=netstatic nofb acpi_sleep=tss sleep BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 922436k/1040384k available (6617k kernel code, 396k
absent, 117552k reserved, 4286k data, 1028k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=15.
[ 0.000000] NR_IRQS:33024 nr_irqs:1208 16
[ 0.000000] Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Detected 3901.188 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 7802.37 BogoMIPS (lpj=3901188)
[ 0.014003] pid_max: default: 32768 minimum: 301
[ 0.017037] Security Framework initialized
[ 0.019004] SELinux: Initializing.
[ 0.022076] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.026231] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032090] Mount-cache hash table entries: 256
[ 0.035127] Initializing cgroup subsys cpuacct
[ 0.037003] Initializing cgroup subsys freezer
[ 0.041103] CPU: Physical Processor ID: 0
[ 0.043003] CPU: Processor Core ID: 0
[ 0.046004] mce: CPU supports 2 MCE banks
[ 0.049023] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.049023] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.049023] tlb_flushall_shift: 5
[ 0.059141] Freeing SMP alternatives: 24k freed
[ 0.066206] ACPI: Core revision 20130117
[ 0.073794] ACPI: All ACPI Tables successfully acquired
[ 0.077280] Switched APIC routing to physical flat.
[ 0.083403] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.097551] smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (fam: 15,
model: 01, stepping: 02)
[ 0.103014] installing Xen timer for CPU 0
[ 0.106078] cpu 0 spinlock event irq 70
[ 0.107023] Performance Events:
[ 0.108005] ------------[ cut here ]------------
[ 0.109008] WARNING: at
/home/konrad/linux/arch/x86/kernel/cpu/perf_event_amd.c:772
amd_pmu_init+0x191/0x24b()
[ 0.110010] Hardware name: HVM domU
[ 0.111005] Odd, counter constraints enabled but no core perfctrs detected!
[ 0.112005] Modules linked in:
[ 0.113186] Pid: 1, comm: swapper/0 Not tainted
3.8.0upstream-06472-g6661875-dirty #1
[ 0.114004] Call Trace:
[ 0.115010] [<ffffffff8109228a>] warn_slowpath_common+0x7a/0xb0
[ 0.116007] [<ffffffff81ac65fa>] ? check_bugs+0x2d/0x2d
[ 0.117007] [<ffffffff81092361>] warn_slowpath_fmt+0x41/0x50
[ 0.118005] [<ffffffff81ac6bc3>] amd_pmu_init+0x191/0x24b
[ 0.119005] [<ffffffff81ac6639>] init_hw_perf_events+0x3f/0x438
[ 0.120006] [<ffffffff81ac1bb4>] ? set_real_mode_permissions+0x9d/0xab
[ 0.121015] [<ffffffff81ac65fa>] ? check_bugs+0x2d/0x2d
[ 0.122007] [<ffffffff8100203d>] do_one_initcall+0x3d/0x170
[ 0.123008] [<ffffffff81abc960>] kernel_init_freeable+0xb1/0x1e6
[ 0.124008] [<ffffffff81653140>] ? rest_init+0xa0/0xa0
[ 0.125013] [<ffffffff81653149>] kernel_init+0x9/0xf0
[ 0.126008] [<ffffffff81671ebc>] ret_from_fork+0x7c/0xb0
[ 0.127013] [<ffffffff81653140>] ? rest_init+0xa0/0xa0
[ 0.128010] ---[ end trace 42ab141fb39a85a5 ]---
[ 0.129011] Broken PMU hardware detected, using software events only.
[ 0.130007] Failed to access perfctr msr (MSR c0010004 is 0)
[ 0.131193] MCE: In-kernel MCE decoding enabled.
[ 0.132131] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.133081] cpu 1 spinlock event irq 71
[ 0.134049] smpboot: Booting Node 0, Processors #1[ 0.008000]
installing Xen timer for CPU 1
[ 0.205154] Brought up 2 CPUs
[ 0.205156] smpboot: Total of 2 processors activated (16021.74 BogoMIPS)
[ 28.134000] BUG: soft lockup - CPU#0 stuck for 23s! [migration/0:8]
[ 28.134000] Modules linked in:
[ 28.134000] CPU 0
[ 28.134000] Pid: 8, comm: migration/0 Tainted: G W
3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU
[ 28.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>]
stop_machine_cpu_stop+0x7b/0xf0
[ 28.134000] RSP: 0000:ffff880039a4dd38 EFLAGS: 00000293
[ 28.134000] RAX: 0000000000000001 RBX: ffffffff810c14c7 RCX: 0000000000000000
[ 28.134000] RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff880039a37de8
[ 28.134000] RBP: ffff880039a4dd68 R08: 0000000000000000 R09: 0000000000000001
[ 28.134000] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880039a4c000
[ 28.134000] R13: 0000000000000000 R14: ffffffff810cac35 R15: ffff880039a4dcb8
[ 28.134000] FS: 0000000000000000(0000) GS:ffff880039e00000(0000)
knlGS:0000000000000000
[ 28.134000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 28.134000] CR2: ffff880001cb7000 CR3: 0000000001a0c000 CR4: 00000000000406f0
[ 28.134000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 28.134000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 28.134000] Process migration/0 (pid: 8, threadinfo ffff880039a4c000, task
ffff880039a2b000)
[ 28.134000] Stack:
[ 28.134000] ffff880039a4dd98 ffff880039a37d58 ffff880039a4c000
ffffffff811070a0
[ 28.134000] ffff880039a37de8 ffff880039e0e5e0 ffff880039a4de48
ffffffff81106df3
[ 28.134000] ffff880039a4dda8 ffff880039a4dfd8 ffff880039e0e5e8
ffff880039a4c000
[ 28.134000] Call Trace:
[ 28.134000] [<ffffffff811070a0>] ? stop_one_cpu_nowait+0x30/0x30
[ 28.134000] [<ffffffff81106df3>] cpu_stopper_thread+0xb3/0x160
[ 28.134000] [<ffffffff81668b11>] ? __schedule+0x3d1/0x7e0
[ 28.134000] [<ffffffff81080069>] ? default_spin_lock_flags+0x9/0x10
[ 28.134000] [<ffffffff810c0127>] smpboot_thread_fn+0x157/0x1e0
[ 28.134000] [<ffffffff810bffd0>] ? smpboot_create_threads+0x80/0x80
[ 28.134000] [<ffffffff810b7446>] kthread+0xc6/0xd0
[ 28.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 28.134000] [<ffffffff81671ebc>] ret_from_fork+0x7c/0xb0
[ 28.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 28.134000] Code: 41 83 fd 03 74 42 f0 41 ff 0e 0f 94 c0 84 c0 74 0f 8b 43 20
8b 4b 10 83 c0 01 89 4b 24 89 43 20 41 83 fd 04 74 3a 44 89 e8 f3 90 <44>
8b 6b 20 41 39 c5 74 ec 41 83 fd 02 75 c6 fa 66 66 90 66 66
[ 56.134000] BUG: soft lockup - CPU#0 stuck for 23s! [migration/0:8]
[ 56.134000] Modules linked in:
[ 56.134000] CPU 0
[ 56.134000] Pid: 8, comm: migration/0 Tainted: G W
3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU
[ 56.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>]
stop_machine_cpu_stop+0x7b/0xf0
[ 56.134000] RSP: 0000:ffff880039a4dd38 EFLAGS: 00000293
[ 56.134000] RAX: 0000000000000001 RBX: ffffffff810c14c7 RCX: 0000000000000000
[ 56.134000] RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff880039a37de8
[ 56.134000] RBP: ffff880039a4dd68 R08: 0000000000000000 R09: 0000000000000001
[ 56.134000] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880039a4c000
[ 56.134000] R13: 0000000000000000 R14: ffffffff810cac35 R15: ffff880039a4dcb8
[ 56.134000] FS: 0000000000000000(0000) GS:ffff880039e00000(0000)
knlGS:0000000000000000
[ 56.134000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 56.134000] CR2: ffff880001cb7000 CR3: 0000000001a0c000 CR4: 00000000000406f0
[ 56.134000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 56.134000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 56.134000] Process migration/0 (pid: 8, threadinfo ffff880039a4c000, task
ffff880039a2b000)
[ 56.134000] Stack:
[ 56.134000] ffff880039a4dd98 ffff880039a37d58 ffff880039a4c000
ffffffff811070a0
[ 56.134000] ffff880039a37de8 ffff880039e0e5e0 ffff880039a4de48
ffffffff81106df3
[ 56.134000] ffff880039a4dda8 ffff880039a4dfd8 ffff880039e0e5e8
ffff880039a4c000
[ 56.134000] Call Trace:
[ 56.134000] [<ffffffff811070a0>] ? stop_one_cpu_nowait+0x30/0x30
[ 56.134000] [<ffffffff81106df3>] cpu_stopper_thread+0xb3/0x160
[ 56.134000] [<ffffffff81668b11>] ? __schedule+0x3d1/0x7e0
[ 56.134000] [<ffffffff81080069>] ? default_spin_lock_flags+0x9/0x10
[ 56.134000] [<ffffffff810c0127>] smpboot_thread_fn+0x157/0x1e0
[ 56.134000] [<ffffffff810bffd0>] ? smpboot_create_threads+0x80/0x80
[ 56.134000] [<ffffffff810b7446>] kthread+0xc6/0xd0
[ 56.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 56.134000] [<ffffffff81671ebc>] ret_from_fork+0x7c/0xb0
[ 56.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 56.134000] Code: 41 83 fd 03 74 42 f0 41 ff 0e 0f 94 c0 84 c0 74 0f 8b 43 20
8b 4b 10 83 c0 01 89 4b 24 89 43 20 41 83 fd 04 74 3a 44 89 e8 f3 90 <44>
8b 6b 20 41 39 c5 74 ec 41 83 fd 02 75 c6 fa 66 66 90 66 66
[ 84.134000] BUG: soft lockup - CPU#0 stuck for 22s! [migration/0:8]
[ 84.134000] Modules linked in:
[ 84.134000] CPU 0
[ 84.134000] Pid: 8, comm: migration/0 Tainted: G W
3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU
[ 84.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>]
stop_machine_cpu_stop+0x7b/0xf0
[ 84.134000] RSP: 0000:ffff880039a4dd38 EFLAGS: 00000293
[ 84.134000] RAX: 0000000000000001 RBX: ffffffff810c14c7 RCX: 0000000000000000
[ 84.134000] RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff880039a37de8
[ 84.134000] RBP: ffff880039a4dd68 R08: 0000000000000000 R09: 0000000000000001
[ 84.134000] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880039a4c000
[ 84.134000] R13: 0000000000000000 R14: ffffffff810cac35 R15: ffff880039a4dcb8
[ 84.134000] FS: 0000000000000000(0000) GS:ffff880039e00000(0000)
knlGS:0000000000000000
[ 84.134000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 84.134000] CR2: ffff880001cb7000 CR3: 0000000001a0c000 CR4: 00000000000406f0
[ 84.134000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 84.134000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 84.134000] Process migration/0 (pid: 8, threadinfo ffff880039a4c000, task
ffff880039a2b000)
[ 84.134000] Stack:
[ 84.134000] ffff880039a4dd98 ffff880039a37d58 ffff880039a4c000
ffffffff811070a0
[ 84.134000] ffff880039a37de8 ffff880039e0e5e0 ffff880039a4de48
ffffffff81106df3
[ 84.134000] ffff880039a4dda8 ffff880039a4dfd8 ffff880039e0e5e8
ffff880039a4c000
[ 84.134000] Call Trace:
[ 84.134000] [<ffffffff811070a0>] ? stop_one_cpu_nowait+0x30/0x30
[ 84.134000] [<ffffffff81106df3>] cpu_stopper_thread+0xb3/0x160
[ 84.134000] [<ffffffff81668b11>] ? __schedule+0x3d1/0x7e0
[ 84.134000] [<ffffffff81080069>] ? default_spin_lock_flags+0x9/0x10
[ 84.134000] [<ffffffff810c0127>] smpboot_thread_fn+0x157/0x1e0
[ 84.134000] [<ffffffff810bffd0>] ? smpboot_create_threads+0x80/0x80
[ 84.134000] [<ffffffff810b7446>] kthread+0xc6/0xd0
[ 84.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 84.134000] [<ffffffff81671ebc>] ret_from_fork+0x7c/0xb0
[ 84.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 84.134000] Code: 41 83 fd 03 74 42 f0 41 ff 0e 0f 94 c0 84 c0 74 0f 8b 43 20
8b 4b 10 83 c0 01 89 4b 24 89 43 20 41 83 fd 04 74 3a 44 89 e8 f3 90 <44>
8b 6b 20 41 39 c5 74 ec 41 83 fd 02 75 c6 fa 66 66 90 66 66
[ 112.134000] BUG: soft lockup - CPU#0 stuck for 22s! [migration/0:8]
[ 112.134000] Modules linked in:
[ 112.134000] CPU 0
[ 112.134000] Pid: 8, comm: migration/0 Tainted: G W
3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU
[ 112.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>]
stop_machine_cpu_stop+0x7b/0xf0
[ 112.134000] RSP: 0000:ffff880039a4dd38 EFLAGS: 00000293
[ 112.134000] RAX: 0000000000000001 RBX: ffffffff810c14c7 RCX: 0000000000000000
[ 112.134000] RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff880039a37de8
[ 112.134000] RBP: ffff880039a4dd68 R08: 0000000000000000 R09: 0000000000000001
[ 112.134000] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880039a4c000
[ 112.134000] R13: 0000000000000000 R14: ffffffff810cac35 R15: ffff880039a4dcb8
[ 112.134000] FS: 0000000000000000(0000) GS:ffff880039e00000(0000)
knlGS:0000000000000000
[ 112.134000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 112.134000] CR2: ffff880001cb7000 CR3: 0000000001a0c000 CR4: 00000000000406f0
[ 112.134000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 112.134000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 112.134000] Process migration/0 (pid: 8, threadinfo ffff880039a4c000, task
ffff880039a2b000)
[ 112.134000] Stack:
[ 112.134000] ffff880039a4dd98 ffff880039a37d58 ffff880039a4c000
ffffffff811070a0
[ 112.134000] ffff880039a37de8 ffff880039e0e5e0 ffff880039a4de48
ffffffff81106df3
[ 112.134000] ffff880039a4dda8 ffff880039a4dfd8 ffff880039e0e5e8
ffff880039a4c000
[ 112.134000] Call Trace:
[ 112.134000] [<ffffffff811070a0>] ? stop_one_cpu_nowait+0x30/0x30
[ 112.134000] [<ffffffff81106df3>] cpu_stopper_thread+0xb3/0x160
[ 112.134000] [<ffffffff81668b11>] ? __schedule+0x3d1/0x7e0
[ 112.134000] [<ffffffff81080069>] ? default_spin_lock_flags+0x9/0x10
[ 112.134000] [<ffffffff810c0127>] smpboot_thread_fn+0x157/0x1e0
[ 112.134000] [<ffffffff810bffd0>] ? smpboot_create_threads+0x80/0x80
[ 112.134000] [<ffffffff810b7446>] kthread+0xc6/0xd0
[ 112.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 112.134000] [<ffffffff81671ebc>] ret_from_fork+0x7c/0xb0
[ 112.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 112.134000] Code: 41 83 fd 03 74 42 f0 41 ff 0e 0f 94 c0 84 c0 74 0f 8b 43 20
8b 4b 10 83 c0 01 89 4b 24 89 43 20 41 83 fd 04 74 3a 44 89 e8 f3 90 <44>
8b 6b 20 41 39 c5 74 ec 41 83 fd 02 75 c6 fa 66 66 90 66 66
[ 140.134000] BUG: soft lockup - CPU#0 stuck for 22s! [migration/0:8]
[ 140.134000] Modules linked in:
[ 140.134000] CPU 0
[ 140.134000] Pid: 8, comm: migration/0 Tainted: G W
3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU
[ 140.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>]
stop_machine_cpu_stop+0x7b/0xf0
[ 140.134000] RSP: 0000:ffff880039a4dd38 EFLAGS: 00000293
[ 140.134000] RAX: 0000000000000001 RBX: ffffffff810c14c7 RCX: 0000000000000000
[ 140.134000] RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff880039a37de8
[ 140.134000] RBP: ffff880039a4dd68 R08: 0000000000000000 R09: 0000000000000001
[ 140.134000] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880039a4c000
[ 140.134000] R13: 0000000000000000 R14: ffffffff810cac35 R15: ffff880039a4dcb8
[ 140.134000] FS: 0000000000000000(0000) GS:ffff880039e00000(0000)
knlGS:0000000000000000
[ 140.134000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 140.134000] CR2: ffff880001cb7000 CR3: 0000000001a0c000 CR4: 00000000000406f0
[ 140.134000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 140.134000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 140.134000] Process migration/0 (pid: 8, threadinfo ffff880039a4c000, task
ffff880039a2b000)
[ 140.134000] Stack:
[ 140.134000] ffff880039a4dd98 ffff880039a37d58 ffff880039a4c000
ffffffff811070a0
[ 140.134000] ffff880039a37de8 ffff880039e0e5e0 ffff880039a4de48
ffffffff81106df3
[ 140.134000] ffff880039a4dda8 ffff880039a4dfd8 ffff880039e0e5e8
ffff880039a4c000
[ 140.134000] Call Trace:
[ 140.134000] [<ffffffff811070a0>] ? stop_one_cpu_nowait+0x30/0x30
[ 140.134000] [<ffffffff81106df3>] cpu_stopper_thread+0xb3/0x160
[ 140.134000] [<ffffffff81668b11>] ? __schedule+0x3d1/0x7e0
[ 140.134000] [<ffffffff81080069>] ? default_spin_lock_flags+0x9/0x10
[ 140.134000] [<ffffffff810c0127>] smpboot_thread_fn+0x157/0x1e0
[ 140.134000] [<ffffffff810bffd0>] ? smpboot_create_threads+0x80/0x80
[ 140.134000] [<ffffffff810b7446>] kthread+0xc6/0xd0
[ 140.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 140.134000] [<ffffffff81671ebc>] ret_from_fork+0x7c/0xb0
[ 140.134000] [<ffffffff810b7380>] ?
kthread_freezable_should_stop+0x80/0x80
[ 140.134000] Code: 41 83 fd 03 74 42 f0 41 ff 0e 0f 94 c0 84 c0 74 0f 8b 43 20
8b 4b 10 83 c0 01 89 4b 24 89 43 20 41 83 fd 04 74 3a 44 89 e8 f3 90 <44>
8b 6b 20 41 39 c5 74 ec 41 83 fd 02 75 c6 fa 66 66 90 66 66
if I revert the above mention git commit it boots just fine:
Loading
vmlinuz........................................................................
Loading
initramf.gz.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ready.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0upstream-06474-g23618fa
(konrad@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC)
) #1 SMP Fri Feb 22 20:11:27 EST 2013
[ 0.000000] Command line: initrd=initramf.gz console=ttyS0,115200
test=netstatic nofb acpi_sleep=tss sleep BOOT_IMAGE=vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.2.
[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for
this kernel: unplug emulated NICs.
[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for
this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at
[ffff8800000fbba0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x3a000000-0x3a1c9fff]
[ 0.000000] init_memory_mapping: [mem 0x38000000-0x39ffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x37ffffff]
[ 0.000000] init_memory_mapping: [mem 0x3a1ca000-0x3f7fffff]
[ 0.000000] RAMDISK: [mem 0x3a1ca000-0x3f7defff]
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc010140 00054 (v01 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc00fe00 000F4 (v04 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc004180 0BBF6 (v02 Xen HVM 00000000
INTL 20100528)
[ 0.000000] ACPI: FACS 00000000fc004140 00040
[ 0.000000] ACPI: APIC 00000000fc00ff00 000D8 (v02 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: HPET 00000000fc010050 00038 (v01 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: WAET 00000000fc010090 00028 (v01 Xen HVM 00000000
HVML 00000000)
[ 0.000000] ACPI: SSDT 00000000fc0100c0 00031 (v02 Xen HVM 00000000
INTL 20100528)
[ 0.000000] ACPI: SSDT 00000000fc010100 00031 (v02 Xen HVM 00000000
INTL 20100528)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3f7fffff]
[ 0.000000] NODE_DATA [mem 0x3f7fc000-0x3f7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f7fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 15 CPUs, 13 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0x3f800000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880039e00000 s84928 r8192
d21568 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 256420
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=initramf.gz console=ttyS0,115200
test=netstatic nofb acpi_sleep=tss sleep BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 922440k/1040384k available (6617k kernel code, 396k
absent, 117548k reserved, 4285k data, 1028k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=15.
[ 0.000000] NR_IRQS:33024 nr_irqs:1208 16
[ 0.000000] Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Detected 3901.188 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 7802.37 BogoMIPS (lpj=3901188)
[ 0.014004] pid_max: default: 32768 minimum: 301
[ 0.017038] Security Framework initialized
[ 0.019003] SELinux: Initializing.
[ 0.022097] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.028113] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.033110] Mount-cache hash table entries: 256
[ 0.036144] Initializing cgroup subsys cpuacct
[ 0.039004] Initializing cgroup subsys freezer
[ 0.042101] CPU: Physical Processor ID: 0
[ 0.045004] CPU: Processor Core ID: 0
[ 0.047005] mce: CPU supports 2 MCE banks
[ 0.049025] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.049025] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.049025] tlb_flushall_shift: 5
[ 0.060140] Freeing SMP alternatives: 24k freed
[ 0.067402] ACPI: Core revision 20130117
[ 0.075448] ACPI: All ACPI Tables successfully acquired
[ 0.079303] Switched APIC routing to physical flat.
[ 0.086337] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.100652] smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (fam: 15,
model: 01, stepping: 02)
[ 0.107016] installing Xen timer for CPU 0
[ 0.109084] cpu 0 spinlock event irq 70
[ 0.110026] Performance Events:
[ 0.111005] ------------[ cut here ]------------
[ 0.112008] WARNING: at
/home/konrad/linux/arch/x86/kernel/cpu/perf_event_amd.c:772
amd_pmu_init+0x191/0x24b()
[ 0.113010] Hardware name: HVM domU
[ 0.114005] Odd, counter constraints enabled but no core perfctrs detected!
[ 0.115007] Modules linked in:
[ 0.116190] Pid: 1, comm: swapper/0 Not tainted 3.8.0upstream-06474-g23618fa
#1
[ 0.117005] Call Trace:
[ 0.118011] [<ffffffff8109228a>] warn_slowpath_common+0x7a/0xb0
[ 0.119007] [<ffffffff81ac65fa>] ? check_bugs+0x2d/0x2d
[ 0.120014] [<ffffffff81092361>] warn_slowpath_fmt+0x41/0x50
[ 0.121010] [<ffffffff81ac6bc3>] amd_pmu_init+0x191/0x24b
[ 0.122008] [<ffffffff81ac6639>] init_hw_perf_events+0x3f/0x438
[ 0.123008] [<ffffffff81ac1bb4>] ? set_real_mode_permissions+0x9d/0xab
[ 0.124011] [<ffffffff81ac65fa>] ? check_bugs+0x2d/0x2d
[ 0.125010] [<ffffffff8100203d>] do_one_initcall+0x3d/0x170
[ 0.126011] [<ffffffff81abc960>] kernel_init_freeable+0xb1/0x1e6
[ 0.127009] [<ffffffff81653040>] ? rest_init+0xa0/0xa0
[ 0.128008] [<ffffffff81653049>] kernel_init+0x9/0xf0
[ 0.129008] [<ffffffff81671fbc>] ret_from_fork+0x7c/0xb0
[ 0.130008] [<ffffffff81653040>] ? rest_init+0xa0/0xa0
[ 0.131009] ---[ end trace 7957b7a5e5b198bd ]---
[ 0.132012] Broken PMU hardware detected, using software events only.
[ 0.133009] Failed to access perfctr msr (MSR c0010004 is 0)
[ 0.134179] MCE: In-kernel MCE decoding enabled.
[ 0.135132] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.136107] cpu 1 spinlock event irq 71
[ 0.137063] smpboot: Booting Node 0, Processors #1[ 0.008000]
installing Xen timer for CPU 1
[ 0.209200] Brought up 2 CPUs
[ 0.209202] smpboot: Total of 2 processors activated (16015.74 BogoMIPS)
[ 0.220139] kworker/u:0 (20) used greatest stack depth: 6168 bytes left
[ 0.220139] RTC time: 1:16:41, date: 02/23/13
[ 0.229069] NET: Registered protocol family 16
[ 0.230054] kworker/u:0 (22) used greatest stack depth: 5704 bytes left
[ 0.237060] ACPI: bus type pci registered
[ 0.240049] dca service started, version 1.12.1
[ 0.244256] PCI: Using configuration type 1 for base access
[ 0.247015] PCI: Using configuration type 1 for extended access
[ 0.264073] bio: create slab <bio-0> at 0
[ 0.265073] ACPI: Added _OSI(Module Device)
[ 0.268052] ACPI: Added _OSI(Processor Device)
[ 0.270007] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.273006] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.282063] ACPI: Interpreter enabled
[ 0.284007] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating
Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.291009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20130117/hwxface-568)
[ 0.298018] S3 S4 S5)
[ 0.299770] ACPI: Using IOAPIC for interrupt routing
[ 0.303054] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.358147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.363225] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling
PCIe ASPM
[ 0.368006] acpi PNP0A03:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.374173] PCI host bridge to bus 0000:00
[ 0.377030] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.380007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.384012] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.389013] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.394008] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff]
[ 0.405302] * Found PM-Timer Bug on the chipset. Due to workarounds for a
bug,
[ 0.405302] * this clock source is slow. Consider trying other clock sources
[ 0.415684] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 0.425458] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.430254] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.434187] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.438297] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.443247] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.468107] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.495342] ACPI: No dock devices found.
[ 0.498051] xen/balloon: Initialising balloon driver.
[ 0.503021] xen-balloon: Initialising balloon driver.
[ 0.507315] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.513020] vgaarb: loaded
[ 0.515008] vgaarb: bridge control possible 0000:00:02.0
[ 0.519043] ACPI: bus type usb registered
[ 0.521025] usbcore: registered new interface driver usbfs
[ 0.525050] usbcore: registered new interface driver hub
[ 0.529032] usbcore: registered new device driver usb
[ 0.532030] pps_core: LinuxPPS API ver. 1 registered
[ 0.535010] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@linux.it>
[ 0.541034] PTP clock support registered
[ 0.544021] PCI: Using ACPI for IRQ routing
[ 0.547504] NetLabel: Initializing
[ 0.550020] NetLabel: domain hash size = 128
[ 0.553005] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.556023] NetLabel: unlabeled traffic allowed by default
[ 0.560086] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.563850] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[ 0.570000] Switching to clocksource xen
[ 0.575292] pnp: PnP ACPI init
[ 0.577723] ACPI: bus type pnp registered
[ 0.580940] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.586188] system 00:02: [io 0x08a0-0x08a3] has been reserved
[ 0.590258] system 00:02: [io 0x0cc0-0x0ccf] has been reserved
[ 0.594253] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.599358] system 00:0b: [io 0x10c0-0x1141] has been reserved
[ 0.603955] system 00:0b: [io 0xb044-0xb047] has been reserved
[ 0.628468] pnp: PnP ACPI: found 12 devices
[ 0.631442] ACPI: ACPI bus type pnp unregistered
[ 0.645562] NET: Registered protocol family 2
[ 0.649044] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.654286] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.658984] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.663716] TCP: reno registered
[ 0.666075] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.670360] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.675037] NET: Registered protocol family 1
[ 0.678309] RPC: Registered named UNIX socket transport module.
[ 0.682174] RPC: Registered udp transport module.
[ 0.687129] RPC: Registered tcp transport module.
[ 0.691254] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.696034] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.699773] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.703675] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.708489] Unpacking initramfs...
[ 2.141533] Freeing initrd memory: 88148k freed
[ 2.164129] Machine check injector initialized
[ 2.168316] microcode: CPU0: patch_level=0x06000626
[ 2.172993] microcode: CPU1: patch_level=0x06000626
[ 2.176728] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.182905] Scanning for low memory corruption every 60 seconds
[ 2.187817] audit: initializing netlink socket (disabled)
[ 2.191843] type=2000 audit(1361582202.962:1): initialized
[ 2.207210] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.211912] VFS: Disk quotas dquot_6.5.2
[ 2.214690] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.219888] NFS: Registering the id_resolver key type
[ 2.223132] Key type id_resolver registered
[ 2.225832] Key type id_legacy registered
[ 2.228426] NTFS driver 2.1.30 [Flags: R/W].
[ 2.231310] msgmni has been set to 1973
[ 2.234951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
251)
[ 2.240338] io scheduler noop registered
[ 2.243302] io scheduler deadline registered
[ 2.246944] io scheduler cfq registered (default)
[ 2.250838] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.254918] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096
kB) at 0xf0000000
[ 2.260761] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.265458] ACPI: Power Button [PWRF]
[ 2.267894] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 2.272527] ACPI: Sleep Button [SLPF]
[ 2.299201] GHES: HEST is not enabled!
[ 2.301887] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 2.306244] Grant tables using version 1 layout.
[ 2.309719] Grant table initialized
[ 2.350043] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.384350] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.389781] Non-volatile memory driver v1.3
[ 2.392982] Linux agpgart interface v0.103
[ 2.396500] [drm] Initialized drm 1.1.0 20060810
[ 2.401266] loop: module loaded
[ 2.404010] libphy: Fixed MDIO Bus: probed
[ 2.406982] tun: Universal TUN/TAP device driver, 1.6
[ 2.410646] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.415328] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network
Driver - version 2.7.12-k
[ 2.421802] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.426813] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller
(EHCI) Driver
[ 2.431520] ehci-pci: EHCI PCI platform driver
[ 2.434881] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI)
Driver
[ 2.438958] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.443235] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 2.446671] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus
number 1
[ 2.451329] uhci_hcd 0000:00:01.2: detected 2 ports
[ 2.454517] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[ 2.459396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.464574] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.469834] usb usb1: Product: UHCI Host Controller
[ 2.473420] usb usb1: Manufacturer: Linux 3.8.0upstream-06474-g23618fa
uhci_hcd
[ 2.478471] usb usb1: SerialNumber: 0000:00:01.2
[ 2.482206] hub 1-0:1.0: USB hub found
[ 2.484834] hub 1-0:1.0: 2 ports detected
[ 2.488090] usbcore: registered new interface driver usblp
[ 2.492447] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 2.500167] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.503714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.507763] mousedev: PS/2 mouse device common for all mice
[ 2.512933] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 2.524976] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.529542] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.534889] cpuidle: using governor ladder
[ 2.537830] cpuidle: using governor menu
[ 2.540584] EFI Variables Facility v0.08 2004-May-17
[ 2.544414] zram: Created 1 device(s) ...
[ 2.547839] Netfilter messages via NETLINK v0.30.
[ 2.551376] nf_conntrack version 0.5.0 (7895 buckets, 31580 max)
[ 2.555360] ctnetlink v0.93: registering with nfnetlink.
[ 2.558943] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.562389] TCP: cubic registered
[ 2.564542] Initializing XFRM netlink socket
[ 2.567367] NET: Registered protocol family 10
[ 2.570381] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.575240] sit: IPv6 over IPv4 tunneling driver
[ 2.578803] NET: Registered protocol family 17
[ 2.582316] Key type dns_resolver registered
[ 2.585987] registered taskstats version 1
[ 2.589437] XENBUS: Device with no driver: device/vbd/5632
[ 2.593412] XENBUS: Device with no driver: device/vbd/51712
[ 2.597376] XENBUS: Device with no driver: device/vkbd/0
[ 2.601142] XENBUS: Device with no driver: device/vif/0
[ 2.606914] Magic number: 1:525:256
[ 2.610031] tty ttytf: hash matches
[ 2.614105] Freeing unused kernel memory: 1028k freed
[ 2.617578] Write protecting the kernel read-only data: 10240k
[ 2.624349] Freeing unused kernel memory: 1564k freed
[ 2.628174] Freeing unused kernel memory: 124k freed
init started: BusyBox v1.14.3 (2013-02-22 20:12:24 EST)
[ 2.637307] consoletype (1105) used greatest stack depth: 5272 bytes left
Mounting directories [ OK ]
mount: mount point /proc/bus/usb does not exist
[ 2.803957] modprobe (1135) used greatest stack depth: 5256 bytes left
mount: mount point /sys/kernel/config does not exist
[ 2.815744] core_filesystem (1106) used greatest stack depth: 4968 bytes left
[ 2.824824] input: Xen Virtual Keyboard as /devices/virtual/input/input3
[ 2.830810] input: Xen Virtual Pointer as /devices/virtual/input/input4
FATAL: Error inserting xen_fbfront
(/lib/modules/3.8.0upstream-06474-g23618fa/kernel/drivers/video/xen-fbfront.ko):
No such device
[ 2.952663] Initialising Xen virtual ethernet driver.
[ 3.058902] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
[ 3.063787] vbd vbd-5632: failed to write error node for device/vbd/5632 (19
xenbus_dev_probe on device/vbd/5632)
[ 3.078892] blkfront: xvda: barrier or flush: disabled using persistent
grants
[ 3.086048] xvda: unknown partition table
[ 3.130560] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 3.179037] udevd (1177): /proc/1177/oom_adj is deprecated, please use
/proc/1177/oom_score_adj instead.
udevd-work[1460]: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for
writing: No such file or directory
Waiting for devices [ OK ]
[ 3.242701] SCSI subsystem initialized
[ 3.280922] ACPI: bus type scsi registered
[ 3.291177] ip (2088) used greatest stack depth: 3928 bytes left
[ 3.298854] libata version 3.00 loaded.
[ 3.303746] ata_piix 0000:00:01.1: version 2.13
[ 3.307420] ata_piix 0000:00:01.1: setting latency timer to 64
[ 3.315495] scsi0 : ata_piix
[ 3.318138] scsi1 : ata_piix
[ 3.320673] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
[ 3.325880] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
[ 3.484370] ata2.01: NODEV after polling detection
[ 3.489426] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 3.495340] ata2.00: configured for MWDMA2
[ 3.500231] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.10
PQ: 0 ANSI: 5
[ 3.511465] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 3.516801] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.522597] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.528965] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.704201] usb usb1: suspend_rh (auto-stop)
Waiting for fb [ OK ]
Waiting for network [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: poRTNETLINK answers: Network is unreachable
[ OK ]
wWaiting for init.custom [ OK ]
Starting SSHd ...
eroff
SSH started [2385]
Waiting for SSHd [ OK ]
WARNING: ssh currently running [2385] ignoring start request
FATAL: Module dump_dma not found.
ERROR: Module dump_dma does not exist in /proc/modules
[ 9.388889] Loading iSCSI transport class v2.0-870.
[ 9.394686] iscsi: registered transport (tcp)
hostname: Name or service not known
iscsistart: transport class version 2.0-870. iscsid version 2.0-872
Could not get list of targets from firmware.
Feb 23 01:16:50 (none) syslogd 1.5.0: restart.
Running in HVM context on Xen v4.2.
You might have to do kill -1 1 if you see ''can''t open
/dev/hvc0''
[1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 0.10 /dev/sr0
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.2 USB Controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II]
(rev 01)
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 Class ff80: XenSource, Inc. Xen Platform Device (rev 01)
CPU0 CPU1
0: 109 0 IO-APIC-edge timer
1: 9 0 xen-pirq-ioapic-edge i8042
4: 201 0 xen-pirq-ioapic-edge serial
8: 59 0 xen-pirq-ioapic-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 125 0 xen-pirq-ioapic-edge i8042
14: 0 0 IO-APIC-edge ata_piix
15: 96 0 IO-APIC-edge ata_piix
23: 0 0 xen-pirq-ioapic-level uhci_hcd:usb1
64: 3128 0 xen-percpu-virq timer0
65: 2815 0 xen-percpu-ipi resched0
66: 0 0 xen-percpu-ipi callfunc0
67: 0 0 xen-percpu-virq debug0
68: 214 0 xen-percpu-ipi callfuncsingle0
69: 0 0 xen-percpu-ipi irqwork0
70: 0 0 xen-percpu-ipi spinlock0
71: 0 0 xen-percpu-ipi spinlock1
72: 0 3338 xen-percpu-ipi resched1
73: 0 0 xen-percpu-ipi callfunc1
74: 0 0 xen-percpu-virq debug1
75: 0 243 xen-percpu-ipi callfuncsingle1
76: 0 0 xen-percpu-ipi irqwork1
77: 0 1802 xen-percpu-virq timer1
78: 344 0 xen-dyn-event xenbus
80: 0 0 xen-dyn-event vkbd
81: 14 0 xen-dyn-event eth0
82: 2 0 xen-dyn-event blkif
NMI: 0 0 Non-maskable interrupts
LOC: 0 0 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 2815 3338 Rescheduling interrupts
CAL: 131 150 Function call interrupts
TLB: 83 93 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
00000000-00000fff : reserved
00001000-0009dfff : System RAM
0009e000-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c8bff : Video ROM
000c9000-000c99ff : Adapter ROM
000e0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-3f7fffff : System RAM
01000000-01676677 : Kernel code
01676678-01aa5dbf : Kernel data
01baf000-01cb4fff : Kernel bss
3f800000-3fffffff : RAM buffer
f0000000-fbffffff : PCI Bus 0000:00
f0000000-f1ffffff : 0000:00:02.0
f0000000-f1ffffff : cirrusfb
f2000000-f2ffffff : 0000:00:03.0
f2000000-f2ffffff : xen-platform-pci
f3000000-f3000fff : 0000:00:02.0
f3000000-f3000fff : cirrusfb
fc000000-ffffffff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fee00000-fee00fff : Local APIC
MemTotal: 1013328 kB
MemFree: 624868 kB
Buffers: 0 kB
Cached: 350448 kB
SwapCached: 0 kB
Active: 15968 kB
Inactive: 334816 kB
Active(anon): 10204 kB
Inactive(anon): 163096 kB
Active(file): 5764 kB
Inactive(file): 171720 kB
Unevictable: 4896 kB
Mlocked: 4896 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 5180 kB
Mapped: 4948 kB
Shmem: 169428 kB
Slab: 22776 kB
SReclaimable: 11768 kB
SUnreclaim: 11008 kB
KernelStack: 648 kB
PageTables: 868 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 506664 kB
Committed_AS: 181212 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 6324 kB
VmallocChunk: 34359731835 kB
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 32768 kB
DirectMap2M: 1009664 kB
Waiting for init.late [ OK ]
Thomas Gleixner
2013-Feb-26 12:36 UTC
Re: Regression introduced with 14e568e78f6f80ca1e27256641ddf524c7dbdc51 (stop_machine: Use smpboot threads)
On Fri, 22 Feb 2013, Konrad Rzeszutek Wilk wrote:> > I don''t know if this is b/c the Xen code is missing something or > expects something that never happend. I hadn''t looked at your > patch in any detail (was going to do that on Monday). > > Either way, if I boot a HVM guest with PV extensions (aka PVHVM) > this is I what get: > [ 0.133081] cpu 1 spinlock event irq 71 > [ 0.134049] smpboot: Booting Node 0, Processors #1[ 0.008000] installing Xen timer for CPU 1 > [ 0.205154] Brought up 2 CPUs > [ 0.205156] smpboot: Total of 2 processors activated (16021.74 BogoMIPS) > > [ 28.134000] BUG: soft lockup - CPU#0 stuck for 23s! [migration/0:8] > [ 28.134000] Modules linked in: > [ 28.134000] CPU 0 > [ 28.134000] Pid: 8, comm: migration/0 Tainted: G W 3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU > [ 28.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>] stop_machine_cpu_stop+0x7b/0xf0So the migration thread loops in stop_machine_cpu_stop(). Now the interesting question is what work was scheduled for that cpu. The main difference between the old code and the new one, is that the thread is created earlier and not detroyed on cpu offline. Could you add some instrumentation, so we can see what kind of cpu stop work is scheduled and from where? Thanks, tglx
Sander Eikelenboom
2013-Feb-26 13:07 UTC
Re: [Xen-devel] Regression introduced with 14e568e78f6f80ca1e27256641ddf524c7dbdc51 (stop_machine: Use smpboot threads)
Tuesday, February 26, 2013, 1:36:36 PM, you wrote:> On Fri, 22 Feb 2013, Konrad Rzeszutek Wilk wrote: >> >> I don''t know if this is b/c the Xen code is missing something or >> expects something that never happend. I hadn''t looked at your >> patch in any detail (was going to do that on Monday). >> >> Either way, if I boot a HVM guest with PV extensions (aka PVHVM)Hmm i''m seeing this booting on baremetal as well. (see http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00836.html)>> this is I what get: >> [ 0.133081] cpu 1 spinlock event irq 71 >> [ 0.134049] smpboot: Booting Node 0, Processors #1[ 0.008000] installing Xen timer for CPU 1 >> [ 0.205154] Brought up 2 CPUs >> [ 0.205156] smpboot: Total of 2 processors activated (16021.74 BogoMIPS) >> >> [ 28.134000] BUG: soft lockup - CPU#0 stuck for 23s! [migration/0:8] >> [ 28.134000] Modules linked in: >> [ 28.134000] CPU 0 >> [ 28.134000] Pid: 8, comm: migration/0 Tainted: G W 3.8.0upstream-06472-g6661875-dirty #1 Xen HVM domU >> [ 28.134000] RIP: 0010:[<ffffffff8110711b>] [<ffffffff8110711b>] stop_machine_cpu_stop+0x7b/0xf0> So the migration thread loops in stop_machine_cpu_stop(). Now the > interesting question is what work was scheduled for that cpu.> The main difference between the old code and the new one, is that the > thread is created earlier and not detroyed on cpu offline.> Could you add some instrumentation, so we can see what kind of cpu > stop work is scheduled and from where?> Thanks,> tglx
Thomas Gleixner
2013-Feb-26 17:44 UTC
Re: [Xen-devel] Regression introduced with 14e568e78f6f80ca1e27256641ddf524c7dbdc51 (stop_machine: Use smpboot threads)
On Tue, 26 Feb 2013, Sander Eikelenboom wrote:> Tuesday, February 26, 2013, 1:36:36 PM, you wrote: > > On Fri, 22 Feb 2013, Konrad Rzeszutek Wilk wrote: > >> > >> I don''t know if this is b/c the Xen code is missing something or > >> expects something that never happend. I hadn''t looked at your > >> patch in any detail (was going to do that on Monday). > >> > >> Either way, if I boot a HVM guest with PV extensions (aka PVHVM) > > Hmm i''m seeing this booting on baremetal as well. > (see http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00836.html)Ok. I decoded it with the help of Konrad. Does the patch below work for you as well? Thanks, tglx Index: linux-2.6/include/linux/smpboot.h ==================================================================--- linux-2.6.orig/include/linux/smpboot.h +++ linux-2.6/include/linux/smpboot.h @@ -24,6 +24,9 @@ struct smpboot_thread_data; * parked (cpu offline) * @unpark: Optional unpark function, called when the thread is * unparked (cpu online) + * @pre_unpark: Optional unpark function, called before the thread is + * unparked (cpu online). This is not guaranteed to be + * called on the target cpu of the thread. Careful! * @selfparking: Thread is not parked by the park function. * @thread_comm: The base name of the thread */ @@ -37,6 +40,7 @@ struct smp_hotplug_thread { void (*cleanup)(unsigned int cpu, bool online); void (*park)(unsigned int cpu); void (*unpark)(unsigned int cpu); + void (*pre_unpark)(unsigned int cpu); bool selfparking; const char *thread_comm; }; Index: linux-2.6/kernel/smpboot.c ==================================================================--- linux-2.6.orig/kernel/smpboot.c +++ linux-2.6/kernel/smpboot.c @@ -209,6 +209,8 @@ static void smpboot_unpark_thread(struct { struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu); + if (ht->pre_unpark) + ht->pre_unpark(cpu); kthread_unpark(tsk); } Index: linux-2.6/kernel/stop_machine.c ==================================================================--- linux-2.6.orig/kernel/stop_machine.c +++ linux-2.6/kernel/stop_machine.c @@ -336,7 +336,7 @@ static struct smp_hotplug_thread cpu_sto .create = cpu_stop_create, .setup = cpu_stop_unpark, .park = cpu_stop_park, - .unpark = cpu_stop_unpark, + .pre_unpark = cpu_stop_unpark, .selfparking = true, };
Sander Eikelenboom
2013-Feb-26 20:33 UTC
Re: [Xen-devel] Regression introduced with 14e568e78f6f80ca1e27256641ddf524c7dbdc51 (stop_machine: Use smpboot threads)
Tuesday, February 26, 2013, 6:44:33 PM, you wrote:> On Tue, 26 Feb 2013, Sander Eikelenboom wrote: >> Tuesday, February 26, 2013, 1:36:36 PM, you wrote: >> > On Fri, 22 Feb 2013, Konrad Rzeszutek Wilk wrote: >> >> >> >> I don''t know if this is b/c the Xen code is missing something or >> >> expects something that never happend. I hadn''t looked at your >> >> patch in any detail (was going to do that on Monday). >> >> >> >> Either way, if I boot a HVM guest with PV extensions (aka PVHVM) >> >> Hmm i''m seeing this booting on baremetal as well. >> (see http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00836.html)> Ok. I decoded it with the help of Konrad. Does the patch below work > for you as well?Did a few reboots and yes it seems to work here as well ! Thx -- Sander> Thanks,> tglx> Index: linux-2.6/include/linux/smpboot.h > ==================================================================> --- linux-2.6.orig/include/linux/smpboot.h > +++ linux-2.6/include/linux/smpboot.h > @@ -24,6 +24,9 @@ struct smpboot_thread_data; > * parked (cpu offline) > * @unpark: Optional unpark function, called when the thread is > * unparked (cpu online) > + * @pre_unpark: Optional unpark function, called before the thread is > + * unparked (cpu online). This is not guaranteed to be > + * called on the target cpu of the thread. Careful! > * @selfparking: Thread is not parked by the park function. > * @thread_comm: The base name of the thread > */ > @@ -37,6 +40,7 @@ struct smp_hotplug_thread { > void (*cleanup)(unsigned int cpu, bool online); > void (*park)(unsigned int cpu); > void (*unpark)(unsigned int cpu); > + void (*pre_unpark)(unsigned int cpu); > bool selfparking; > const char *thread_comm; > }; > Index: linux-2.6/kernel/smpboot.c > ==================================================================> --- linux-2.6.orig/kernel/smpboot.c > +++ linux-2.6/kernel/smpboot.c > @@ -209,6 +209,8 @@ static void smpboot_unpark_thread(struct > { > struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu); >+ if (ht->>pre_unpark) + ht->>pre_unpark(cpu);> kthread_unpark(tsk); > } > > Index: linux-2.6/kernel/stop_machine.c > ==================================================================> --- linux-2.6.orig/kernel/stop_machine.c > +++ linux-2.6/kernel/stop_machine.c > @@ -336,7 +336,7 @@ static struct smp_hotplug_thread cpu_sto > .create = cpu_stop_create, > .setup = cpu_stop_unpark, > .park = cpu_stop_park, > - .unpark = cpu_stop_unpark, > + .pre_unpark = cpu_stop_unpark, > .selfparking = true, > }; >