*Hi all,
I''m not quiet sure the most reasonable way to dealing with bonding on
xenserver.
My configuration is as follow.
It was ok if i do nothing, but When I tried to ''service network
restart'',
the bond is break.
Then, /proc/net/bonding/pbond:
Slave Interface: eth0 eth1 was down
bonding MII status: down
My questions are:
how to deal with this situation?
how to avoid the bond breading when ''service network restart''
what''s the most standard way to make bond on xenserver(phy)?
#XEN
setting==============================================================Begin
/bin/cat > /etc/xen/xend-config.sxp << "EOF"
(xend-unix-server yes)
(xend-unix-path /var/lib/xend/xend-socket)
(xend-relocation-hosts-allow '' '')
(network-script ''network-bridge-bonding netdev=bond0'')
(vif-script vif-bridge)
(dom0-cpus 2)
(keymap ''en-us'')
EOF
#XEN
setting==============================================================End
#Network interface
bonding================================================Begin
cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << "EOF"
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=yes
EOF
cat > /etc/sysconfig/network-scripts/ifcfg-eth1 << "EOF"
DEVICE=eth1
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=yes
EOF
# Network Bonding
cat > /etc/sysconfig/network-scripts/ifcfg-bond0 << "EOF"
DEVICE=bond0
BOOTPROTO=static
BROADCAST=1.1.1.1
IPADDR=1.1.1.1
NETMASK=255.255.255.255
GATEWAY=1.1.1.1
ONBOOT=yes
TYPE=Ethernet
EOF
cat >> /etc/modprobe.conf << "EOF"
alias bond0 bonding
options bond0 miimon=100 mode=6
EOF
#Network interface
bonding================================================End
Thank you all
Best Regards,
Jasonqi
*
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
