I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been experiencing a couple of panics since. Two times I was able to reproduce the crash by simply running upgrade-grub2 after fiddling with linux/xen cmdline options, but I noticed it does also crash on other (less known) occasions. No VMs have been setup yet, so it''s purely a domain 0 setup so far. Attaching the relevant files, in the hope they may help understanding the cause of this. - xl-dmesg.out - dmidecode.out - lspci-vvv.out - 3.2.9-config Goncalo [ 197.398425] BUG: unable to handle kernel paging request at 000012b7 [ 197.398794] IP: [<c1269dae>] is_xen_swiotlb_buffer+0x35/0x80 [ 197.399085] *pdpt = 0000000000000000 *pde = 0000000000000000 [ 197.399406] Oops: 0000 [#1] SMP [ 197.399720] Modules linked in: dm_mod binfmt_misc loop processor thermal_sys hwmon button sd_mod mptsas mptscsih mptbase scsi_transport_sas bnx2 scsi_mod [last unloaded: scsi_wait_scan] [ 197.400971] [ 197.401213] Pid: 0, comm: swapper/0 Tainted: G W 3.2.9 #9 Dell Inc. PowerEdge R310/05XKKK [ 197.401779] EIP: 0061:[<c1269dae>] EFLAGS: 00010206 CPU: 0 [ 197.402030] EIP is at is_xen_swiotlb_buffer+0x35/0x80 [ 197.402280] EAX: 00000063 EBX: ffffffff ECX: c1779000 EDX: ffffffff [ 197.402534] ESI: 00000000 EDI: 00000002 EBP: 00000000 ESP: e3c0fec4 [ 197.402805] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 197.403055] Process swapper/0 (pid: 0, ti=e3c0e000 task=c1641060 task.ti=c163a000) [ 197.403513] Stack: [ 197.403756] 00000000 00000000 c1269e38 ffffffff e3e2a860 00000092 c5790480 f017e220 [ 197.404510] c1269efb c5b0a0c0 c1269f0a 00000092 00000002 00000000 eda6757c 00000092 [ 197.405245] 00000002 04450000 00000000 00000444 00000000 00000000 00000000 00000544 [ 197.405985] Call Trace: [ 197.406233] [<c1269e38>] ? xen_swiotlb_sync_single+0x3f/0x7b [ 197.406488] [<c1269efb>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 [ 197.406744] [<c1269f0a>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 [ 197.407026] [<eda6757c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] [ 197.407286] [<eda678b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] [ 197.407537] [<eda679a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] [ 197.407788] [<c1047372>] ? irq_enter+0x49/0x49 [ 197.408037] [<c13083f6>] ? net_rx_action+0xb8/0x1d6 [ 197.408307] [<c1047372>] ? irq_enter+0x49/0x49 [ 197.408556] [<c104741a>] ? __do_softirq+0xa8/0x168 [ 197.408805] [<c1047372>] ? irq_enter+0x49/0x49 [ 197.409052] <IRQ> [ 197.409332] [<c1047248>] ? irq_exit+0x2f/0x91 [ 197.409588] [<c126234e>] ? xen_evtchn_do_upcall+0x1d/0x26 [ 197.409843] [<c13d18c7>] ? xen_do_upcall+0x7/0xc [ 197.410095] [<c106007b>] ? update_wall_time+0xa0/0x3ef [ 197.410348] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 [ 197.410601] [<c1006772>] ? xen_safe_halt+0xf/0x1b [ 197.410852] [<c10137b4>] ? default_idle+0x65/0xb8 [ 197.411122] [<c100c2c3>] ? cpu_idle+0x61/0x7e [ 197.411373] [<c16787f5>] ? start_kernel+0x34a/0x34d [ 197.411627] [<c167a258>] ? xen_start_kernel+0x554/0x55b [ 197.411875] Code: ff ff ff 89 c3 e8 09 d6 d9 ff 39 f0 b8 ff ff ff ff 0f 45 d8 89 d8 c1 e8 0e 0f be 80 e0 44 67 c1 85 c0 78 4d 8b 14 85 c0 44 67 c1 <8b> 82 b8 12 00 00 03 82 b0 12 00 00 39 c3 73 36 a1 28 [ 197.414841] EIP: [<c1269dae>] is_xen_swiotlb_buffer+0x35/0x80 SS:ESP 0069:e3c0fec4 [ 197.420448] CR2: 00000000000012b7 [ 197.420711] ---[ end trace 4eaa2a86a8e2da48 ]--- [ 197.420962] Kernel panic - not syncing: Fatal exception in interrupt [ 197.421214] Pid: 0, comm: swapper/0 Tainted: G D W 3.2.9 #9 [ 197.421466] Call Trace: [ 197.421709] [<c13ce57c>] ? panic+0x4d/0x157 [ 197.421958] [<c100efc4>] ? oops_end+0xad/0xb8 [ 197.422226] [<c102a930>] ? bad_area_nosemaphore+0xa/0xc [ 197.422474] [<c102ad3d>] ? do_page_fault+0x167/0x31a [ 197.422726] [<c11fe40d>] ? cpumask_next_and+0x20/0x2b [ 197.422975] [<c1029b90>] ? pvclock_clocksource_read+0xec/0x11e [ 197.423230] [<c100b840>] ? __spin_time_accum+0x26/0x36 [ 197.423502] [<c100ba6f>] ? __xen_spin_lock+0xb4/0xc8 [ 197.423754] [<c100673c>] ? xen_force_evtchn_callback+0xc/0x10 [ 197.424008] [<c102abd6>] ? vmalloc_sync_all+0xb6/0xb6 [ 197.424261] [<c13d106e>] ? error_code+0x5a/0x60 [ 197.424512] [<c102abd6>] ? vmalloc_sync_all+0xb6/0xb6 [ 197.424763] [<c1269dae>] ? is_xen_swiotlb_buffer+0x35/0x80 [ 197.425034] [<c1269e38>] ? xen_swiotlb_sync_single+0x3f/0x7b [ 197.425289] [<c1269efb>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 [ 197.425545] [<c1269f0a>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 [ 197.425801] [<eda6757c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] [ 197.426054] [<eda678b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] [ 197.426328] [<eda679a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] [ 197.426579] [<c1047372>] ? irq_enter+0x49/0x49 [ 197.426830] [<c13083f6>] ? net_rx_action+0xb8/0x1d6 [ 197.427083] [<c1047372>] ? irq_enter+0x49/0x49 [ 197.427337] [<c104741a>] ? __do_softirq+0xa8/0x168 [ 197.427590] [<c1047372>] ? irq_enter+0x49/0x49 [ 197.427853] <IRQ> [<c1047248>] ? irq_exit+0x2f/0x91 [ 197.428149] [<c126234e>] ? xen_evtchn_do_upcall+0x1d/0x26 [ 197.428410] [<c13d18c7>] ? xen_do_upcall+0x7/0xc [ 197.428668] [<c106007b>] ? update_wall_time+0xa0/0x3ef [ 197.428920] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 [ 197.429191] [<c1006772>] ? xen_safe_halt+0xf/0x1b [ 197.429446] [<c10137b4>] ? default_idle+0x65/0xb8 [ 197.429695] [<c100c2c3>] ? cpu_idle+0x61/0x7e [ 197.429941] [<c16787f5>] ? start_kernel+0x34a/0x34d [ 197.430189] [<c167a258>] ? xen_start_kernel+0x554/0x55b (XEN) Domain 0 crashed: rebooting machine in 5 seconds. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com> wrote:> > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve beenDo you get similar issues with Xen 4.1?> experiencing a couple of panics since. Two times I was able to > reproduce the crash by simply running upgrade-grub2 after fiddling > with linux/xen cmdline options, but I noticed it does also crash on > other (less known) occasions. No VMs have been setup yet, so it''s > purely a domain 0 setup so far. > > Attaching the relevant files, in the hope they may help understanding > the cause of this. > > - xl-dmesg.out > - dmidecode.out > - lspci-vvv.out > - 3.2.9-configAlso need dmesg of dom0> > Goncalo > > [ 197.398425] BUG: unable to handle kernel paging request at 000012b7 > [ 197.398794] IP: [<c1269dae>] is_xen_swiotlb_buffer+0x35/0x80 > [ 197.399085] *pdpt = 0000000000000000 *pde = 0000000000000000 > [ 197.399406] Oops: 0000 [#1] SMP > [ 197.399720] Modules linked in: dm_mod binfmt_misc loop processor > thermal_sys hwmon button sd_mod mptsas mptscsih mptbase > scsi_transport_sas bnx2 scsi_mod [last unloaded: scsi_wait_scan] > [ 197.400971] > [ 197.401213] Pid: 0, comm: swapper/0 Tainted: G W 3.2.9 #9 > Dell Inc. PowerEdge R310/05XKKK > [ 197.401779] EIP: 0061:[<c1269dae>] EFLAGS: 00010206 CPU: 0 > [ 197.402030] EIP is at is_xen_swiotlb_buffer+0x35/0x80 > [ 197.402280] EAX: 00000063 EBX: ffffffff ECX: c1779000 EDX: ffffffff > [ 197.402534] ESI: 00000000 EDI: 00000002 EBP: 00000000 ESP: e3c0fec4 > [ 197.402805] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 > [ 197.403055] Process swapper/0 (pid: 0, ti=e3c0e000 task=c1641060 > task.ti=c163a000) > [ 197.403513] Stack: > [ 197.403756] 00000000 00000000 c1269e38 ffffffff e3e2a860 00000092 > c5790480 f017e220 > [ 197.404510] c1269efb c5b0a0c0 c1269f0a 00000092 00000002 00000000 > eda6757c 00000092 > [ 197.405245] 00000002 04450000 00000000 00000444 00000000 00000000 > 00000000 00000544 > [ 197.405985] Call Trace: > [ 197.406233] [<c1269e38>] ? xen_swiotlb_sync_single+0x3f/0x7b > [ 197.406488] [<c1269efb>] ? > xen_swiotlb_sync_single_for_device+0x13/0x13 > [ 197.406744] [<c1269f0a>] ? > xen_swiotlb_sync_single_for_cpu+0xf/0x13 > [ 197.407026] [<eda6757c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > [ 197.407286] [<eda678b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > [ 197.407537] [<eda679a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > [ 197.407788] [<c1047372>] ? irq_enter+0x49/0x49 > [ 197.408037] [<c13083f6>] ? net_rx_action+0xb8/0x1d6 > [ 197.408307] [<c1047372>] ? irq_enter+0x49/0x49 > [ 197.408556] [<c104741a>] ? __do_softirq+0xa8/0x168 > [ 197.408805] [<c1047372>] ? irq_enter+0x49/0x49 > [ 197.409052] <IRQ> > [ 197.409332] [<c1047248>] ? irq_exit+0x2f/0x91 > [ 197.409588] [<c126234e>] ? xen_evtchn_do_upcall+0x1d/0x26 > [ 197.409843] [<c13d18c7>] ? xen_do_upcall+0x7/0xc > [ 197.410095] [<c106007b>] ? update_wall_time+0xa0/0x3ef > [ 197.410348] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > [ 197.410601] [<c1006772>] ? xen_safe_halt+0xf/0x1b > [ 197.410852] [<c10137b4>] ? default_idle+0x65/0xb8 > [ 197.411122] [<c100c2c3>] ? cpu_idle+0x61/0x7e > [ 197.411373] [<c16787f5>] ? start_kernel+0x34a/0x34d > [ 197.411627] [<c167a258>] ? xen_start_kernel+0x554/0x55b > [ 197.411875] Code: ff ff ff 89 c3 e8 09 d6 d9 ff 39 f0 b8 ff ff ff > ff 0f 45 d8 89 d8 c1 e8 0e 0f be 80 e0 44 67 c1 85 c0 78 4d 8b 14 85 > c0 44 67 c1 <8b> 82 b8 12 00 00 03 82 b0 12 00 00 39 c3 73 36 a1 28 > [ 197.414841] EIP: [<c1269dae>] is_xen_swiotlb_buffer+0x35/0x80 > SS:ESP 0069:e3c0fec4 > [ 197.420448] CR2: 00000000000012b7 > [ 197.420711] ---[ end trace 4eaa2a86a8e2da48 ]--- > [ 197.420962] Kernel panic - not syncing: Fatal exception in > interrupt > [ 197.421214] Pid: 0, comm: swapper/0 Tainted: G D W 3.2.9 #9 > [ 197.421466] Call Trace: > [ 197.421709] [<c13ce57c>] ? panic+0x4d/0x157 > [ 197.421958] [<c100efc4>] ? oops_end+0xad/0xb8 > [ 197.422226] [<c102a930>] ? bad_area_nosemaphore+0xa/0xc > [ 197.422474] [<c102ad3d>] ? do_page_fault+0x167/0x31a > [ 197.422726] [<c11fe40d>] ? cpumask_next_and+0x20/0x2b > [ 197.422975] [<c1029b90>] ? pvclock_clocksource_read+0xec/0x11e > [ 197.423230] [<c100b840>] ? __spin_time_accum+0x26/0x36 > [ 197.423502] [<c100ba6f>] ? __xen_spin_lock+0xb4/0xc8 > [ 197.423754] [<c100673c>] ? xen_force_evtchn_callback+0xc/0x10 > [ 197.424008] [<c102abd6>] ? vmalloc_sync_all+0xb6/0xb6 > [ 197.424261] [<c13d106e>] ? error_code+0x5a/0x60 > [ 197.424512] [<c102abd6>] ? vmalloc_sync_all+0xb6/0xb6 > [ 197.424763] [<c1269dae>] ? is_xen_swiotlb_buffer+0x35/0x80 > [ 197.425034] [<c1269e38>] ? xen_swiotlb_sync_single+0x3f/0x7b > [ 197.425289] [<c1269efb>] ? > xen_swiotlb_sync_single_for_device+0x13/0x13 > [ 197.425545] [<c1269f0a>] ? > xen_swiotlb_sync_single_for_cpu+0xf/0x13 > [ 197.425801] [<eda6757c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > [ 197.426054] [<eda678b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > [ 197.426328] [<eda679a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > [ 197.426579] [<c1047372>] ? irq_enter+0x49/0x49 > [ 197.426830] [<c13083f6>] ? net_rx_action+0xb8/0x1d6 > [ 197.427083] [<c1047372>] ? irq_enter+0x49/0x49 > [ 197.427337] [<c104741a>] ? __do_softirq+0xa8/0x168 > [ 197.427590] [<c1047372>] ? irq_enter+0x49/0x49 > [ 197.427853] <IRQ> [<c1047248>] ? irq_exit+0x2f/0x91 > [ 197.428149] [<c126234e>] ? xen_evtchn_do_upcall+0x1d/0x26 > [ 197.428410] [<c13d18c7>] ? xen_do_upcall+0x7/0xc > [ 197.428668] [<c106007b>] ? update_wall_time+0xa0/0x3ef > [ 197.428920] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > [ 197.429191] [<c1006772>] ? xen_safe_halt+0xf/0x1b > [ 197.429446] [<c10137b4>] ? default_idle+0x65/0xb8 > [ 197.429695] [<c100c2c3>] ? cpu_idle+0x61/0x7e > [ 197.429941] [<c16787f5>] ? start_kernel+0x34a/0x34d > [ 197.430189] [<c167a258>] ? xen_start_kernel+0x554/0x55b > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote:> > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > Do you get similar issues with Xen 4.1?Can''t say I tried it, but I can give it a spin. Any specific tag?> > experiencing a couple of panics since. Two times I was able to > > reproduce the crash by simply running upgrade-grub2 after fiddling > > with linux/xen cmdline options, but I noticed it does also crash on > > other (less known) occasions. No VMs have been setup yet, so it''s > > purely a domain 0 setup so far. > > > > Attaching the relevant files, in the hope they may help understanding > > the cause of this. > > > > - xl-dmesg.out > > - dmidecode.out > > - lspci-vvv.out > > - 3.2.9-config > > Also need dmesg of dom0See attached. Goncalo
Attachment this time. On Tue, 13 Mar 2012, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > Do you get similar issues with Xen 4.1? > > Can''t say I tried it, but I can give it a spin. Any specific tag? > > > > experiencing a couple of panics since. Two times I was able to > > > reproduce the crash by simply running upgrade-grub2 after fiddling > > > with linux/xen cmdline options, but I noticed it does also crash on > > > other (less known) occasions. No VMs have been setup yet, so it''s > > > purely a domain 0 setup so far. > > > > > > Attaching the relevant files, in the hope they may help understanding > > > the cause of this. > > > > > > - xl-dmesg.out > > > - dmidecode.out > > > - lspci-vvv.out > > > - 3.2.9-config > > > > Also need dmesg of dom0 > > See attached. > > Goncalo_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Tue, 13 Mar 2012, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > Do you get similar issues with Xen 4.1? > > Can''t say I tried it, but I can give it a spin. Any specific tag?As I cloned unstable from a local dir into a different dir in the server to checkout 4.1.0, the server crashed again, which leads me to think minimal dom0 stress may be just enough to reproduce it in my environment. I''ll be doing some more testing to see if I can find out what it takes. In any case, I''ve done some minimal testing with 4.1.0-branch, such as having 10 instances of update-grub running in parallel, a find / -ls, etc. 4.1.0 seems to handle it well, AFAICT. Goncalo
On Tue, Mar 13, 2012 at 02:26:17PM +0000, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > Do you get similar issues with Xen 4.1? > > Can''t say I tried it, but I can give it a spin. Any specific tag?The latest.> > > > experiencing a couple of panics since. Two times I was able to > > > reproduce the crash by simply running upgrade-grub2 after fiddling > > > with linux/xen cmdline options, but I noticed it does also crash on > > > other (less known) occasions. No VMs have been setup yet, so it''s > > > purely a domain 0 setup so far. > > > > > > Attaching the relevant files, in the hope they may help understanding > > > the cause of this. > > > > > > - xl-dmesg.out > > > - dmidecode.out > > > - lspci-vvv.out > > > - 3.2.9-config > > > > Also need dmesg of dom0 > > See attached. > > Goncalo > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel
On Tue, Mar 13, 2012 at 03:58:42PM +0000, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > > > Do you get similar issues with Xen 4.1? > > > > Can''t say I tried it, but I can give it a spin. Any specific tag? > > As I cloned unstable from a local dir into a different dir in the > server to checkout 4.1.0, the server crashed again, which leads me to > think minimal dom0 stress may be just enough to reproduce it in my > environment. I''ll be doing some more testing to see if I can find out > what it takes. > > In any case, I''ve done some minimal testing with 4.1.0-branch, such as > having 10 instances of update-grub running in parallel, a find / -ls, > etc. > > 4.1.0 seems to handle it well, AFAICT.OK. So xen-unstable looks to have a bug somewhere.> > Goncalo > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel
On Tue, 13 Mar 2012, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > > > Do you get similar issues with Xen 4.1? > > > > Can''t say I tried it, but I can give it a spin. Any specific tag? > > As I cloned unstable from a local dir into a different dir in the > server to checkout 4.1.0, the server crashed again, which leads me to > think minimal dom0 stress may be just enough to reproduce it in my > environment. I''ll be doing some more testing to see if I can find out > what it takes. > > In any case, I''ve done some minimal testing with 4.1.0-branch, such as > having 10 instances of update-grub running in parallel, a find / -ls, > etc. > > 4.1.0 seems to handle it well, AFAICT. >Scratch that. 4.1.0 fell too. Attaching the entire boot log. With 4.1.0 it appears that it takes more than just update-grub to make the server go belly-up, so I had a large data transfer in the background and a sequence of update-grub'' commands being spawned into background in quick succession and that didn''t take more than 3-5 seconds. Goncalo _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote:> On Tue, Mar 13, 2012 at 02:26:17PM +0000, Goncalo Gomes wrote: > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > > > Do you get similar issues with Xen 4.1? > > > > Can''t say I tried it, but I can give it a spin. Any specific tag? > > The latest.Missed that, I''ll try with 4.1.2. Goncalo
On Tue, 13 Mar 2012, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > On Tue, Mar 13, 2012 at 02:26:17PM +0000, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > > > > > Do you get similar issues with Xen 4.1? > > > > > > Can''t say I tried it, but I can give it a spin. Any specific tag? > > > > The latest. > > Missed that, I''ll try with 4.1.2.Same behaviour as in 4.1.0-rc7-pre (tag 4.1.0-branch) and unstable. Boot log for 4.1.2 attached. Goncalo> Goncalo > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Tue, Mar 13, 2012 at 05:32:39PM +0000, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > On Tue, Mar 13, 2012 at 02:26:17PM +0000, Goncalo Gomes wrote: > > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > > > > > > > On Mar 12, 2012 12:28 PM, "Goncalo Gomes" <Goncalo.Gomes@eu.citrix.com<mailto:Goncalo.Gomes@eu.citrix.com>> wrote: > > > > > > > > > > > > I''ve compiled unstable c/s: 5d20d2f6ffed and linux 3.2.9 but I''ve been > > > > > > > > > > Do you get similar issues with Xen 4.1? > > > > > > > > Can''t say I tried it, but I can give it a spin. Any specific tag? > > > > > > The latest. > > > > Missed that, I''ll try with 4.1.2. > > Same behaviour as in 4.1.0-rc7-pre (tag 4.1.0-branch) and unstable. > > Boot log for 4.1.2 attached. > > Goncalo > > > Goncalo > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xen.org > > http://lists.xen.org/xen-devel> Script started on Tue 13 Mar 2012 17:21:22 GMT > goncalog@eire:~$ xenuse -t dt29 > [Enter `^Ec?'' for help] > > PXELINUX 3.70 2008-06-30 Copyright (C) 1994-2008 H. Peter Anvin > boot: > Booting from local disk... > [?25l[H[J[2;19HGNU GRUB version 1.98+20100804-14+squeeze1 > >[4;2H+--------------------------------------------------------------------------+[5;2H|[5;77H|[6;2H|[6;77H|[7;2H|[7;77H|[8;2H|[8;77H|[9;2H|[9;77H|[10;2H|[10;77H|[11;2H|[11;77H|[12;2H|[12;77H|[13;2H|[13;77H|[14;2H|[14;77H|[15;2H|[15;77H|[16;2H+--------------------------------------------------------------------------+[17;2H>Use the ^ and v keys to select which entry is highlighted.>Press enter to boot the selected OS, ''e'' to edit the commands>before booting or ''c'' for a command-line.>[5;78H [5;3HDebian GNU/Linux, with Linux 3.2.9-x86 [5;76H[6;3HDebian GNU/Linux, with Linux 3.2.9-x86 (recovery mode) [6;76H[7;3HDebian GNU/Linux, with Linux 3.0.23-x86 [7;76H[8;3HDebian GNU/Linux, with Linux 3.0.23-x86 (recovery mode) [8;76H[9;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 [9;76H[10;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 (recovery mode) [10;76H[11;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem [11;76H[12;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem (recovery mode) [12;76H[13;3HX en 4 Linux 3.2.9 x86 [13;76H[14;3H [14;76H[15;3H [15;76H[15;78H [5;76H[22;1H The highlighted entry will be executed automatically in 300s. [5;76H[22;1H The highlighted entry will be executed automatically in 299s. [5;76H[22;1H The highlighted entry will be executed automatically in 298s. [5;76H[22;1H The highlighted entry will be executed automatically in 297s. [5;76H[22;1H The highlighted entry will be executed automatically in 296s. [5;76H[22;1H The highlighted entry wi ll be executed automatically in 295s. [5;76H[22;1H The highlighted entry will be executed automatically in 294s. [5;76H[22;1H The highlighted entry will be executed automatically in 293s. [5;76H[22;1H The highlighted entry will be executed automatically in 292s. [5;76H[22;1H The highlighted entry will be executed automatically in 291s. [5;76H[22;1H The highlighted entry will be executed automatically in 290s. [5;76H[22;1H [5;76H[5;3HDebian GNU/Linux, with Linux 3.2.9-x86 [5;76H[6;3HDebian GNU/Linux, with Linux 3.2.9-x86 (recovery mode) [ m [6;76H[6;3HDebian GNU/Linux, with Linux 3.2.9-x86 (recovery mode) [6;76H[7;3HDebian GNU/Linux, with Linux 3.0.23-x86 [7;76H[7;3HDebian GNU/Linux, with Linux 3.0.23-x86 [7;76H[8;3HDebian GNU/Linux, with Linux 3.0.23-x86 (recovery mode) [8;76H[8;3HDebian GNU/Linux, with Linux 3.0.23-x86 (recovery mode) [8;76H[9;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 [9;76H[9;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 [9;76H[10;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 (recovery mode) [10;76H[10;3HDe bian GNU/Linux, with Linux 2.6.32.49-x86 (recovery mode) [10;76H[11;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem [11;76H[11;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem [11;76H[12;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem (recovery mode) [12;76H[12;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem (recovery mode) [12;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[13;3HXen 4 Linux 3.2.9 x86 [13;76H[?25h[H[J[H[J[2;19HGNU GRUB version 1.98+20100804-14+squeeze1> >[4;2H+--------------------------------------------------------------------------+[5;2H|[5;77H|[6;2H|[6;77H|[7;2H|[7;77H|[8;2H|[8;77H|[9;2H|[9;77H|[10;2H|[10;77H|[11;2H|[11;77H|[12;2H|[12;77H|[13;2H|[13;77H|[14;2H|[14;77H|[15;2H|[15;77H|[16;2H+--------------------------------------------------------------------------+[17;2H>Minimum Emacs-like screen editing is supported. TAB lists>completions. Press Ctrl-x to boot, Ctrl-c for a>command-line or ESC to discard edits and return to the>GRUB menu.[5;4Hinsmod part_msdos [6;4Hinsmod ext2 [7;4Hset root=''(/dev/sda,msdos1)'' [8;4Hsearch --no-floppy --fs-uuid --set c2941c7c-fe82-4b89-9baa-7a13f09ec335\[9;4H [10;4Hmultiboot /boot/xen-4.1.2.gz placeholder dom0_mem=1024M com1=115200,8n1\[11;4H console=com1,vga loglvl=all guest_loglvl=all [12;4Hmodule /boot/vmlinuz-3.2.9-x86 placeholder root=/dev/sda1 ro console=t\[13;4Hty0 console=hvc0 earlyprintk=xen [14;4Hmodule /boot/initrd.img-3.2.9-x86 [15;4H [5;73H [15;78H [5;4H[?25h[?25l[H[J[2;19HGNU GRUB version 1.98+20100804-14+squeeze1> >[4;2H+--------------------------------------------------------------------------+[5;2H|[5;77H|[6;2H|[6;77H|[7;2H|[7;77H|[8;2H|[8;77H|[9;2H|[9;77H|[10;2H|[10;77H|[11;2H|[11;77H|[12;2H|[12;77H|[13;2H|[13;77H|[14;2H|[14;77H|[15;2H|[15;77H|[16;2H+--------------------------------------------------------------------------+[17;2H>Use the ^ and v keys to select which entry is highlighted.>Press enter to boot the selected OS, ''e'' to edit the commands>before booting or ''c'' for a command-line.>[5;78H [5;3HDebian GNU/Linux, with Linux 3.2.9-x86 [5;76H[6;3HDebian GNU/Linux, with Linux 3.2.9-x86 (recovery mode) [6;76H[7;3HDebian GNU/Linux, with Linux 3.0.23-x86 [7;76H[8;3HDebian GNU/Linux, with Linux 3.0.23-x86 (recovery mode) [8;76H[9;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 [9;76H[10;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 (recovery mode) [10;76H[11;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem [11;76H[12;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem (recovery mode) [12;76H[13;3HX en 4 Linux 3.2.9 x86 [13;76H[14;3H [14;76H[15;3H [15;76H[15;78H [13;76H[22;1H [13;76H[?25h[H[J[H[J[2;19HGNU GRUB version 1.98+20100804-14+squeeze1> >[4;2H+--------------------------------------------------------------------------+[5;2H|[5;77H|[6;2H|[6;77H|[7;2H|[7;77H|[8;2H|[8;77H|[9;2H|[9;77H|[10;2H|[10;77H|[11;2H|[11;77H|[12;2H|[12;77H|[13;2H|[13;77H|[14;2H|[14;77H|[15;2H|[15;77H|[16;2H+--------------------------------------------------------------------------+[17;2H>Minimum Emacs-like screen editing is supported. TAB lists>completions. Press Ctrl-x to boot, Ctrl-c for a>command-line or ESC to discard edits and return to the>GRUB menu.[5;4Hinsmod part_msdos [6;4Hinsmod ext2 [7;4Hset root=''(/dev/sda,msdos1)'' [8;4Hsearch --no-floppy --fs-uuid --set c2941c7c-fe82-4b89-9baa-7a13f09ec335\[9;4H [10;4Hmultiboot /boot/xen-4.1.2.gz placeholder dom0_mem=1024M com1=115200,8n1\[11;4H console=com1,vga loglvl=all guest_loglvl=all [12;4Hmodule /boot/vmlinuz-3.2.9-x86 placeholder root=/dev/sda1 ro console=t\[13;4Hty0 console=hvc0 earlyprintk=xen [14;4Hmodule /boot/initrd.img-3.2.9-x86 [15;4H [5;73H [15;78H [5;4H[?25h[6;4H[7;4H[?25l[H[J[2;19HGNU GRUB version 1.98+20100804-14+squeeze1> >[4;2H+--------------------------------------------------------------------------+[5;2H|[5;77H|[6;2H|[6;77H|[7;2H|[7;77H|[8;2H|[8;77H|[9;2H|[9;77H|[10;2H|[10;77H|[11;2H|[11;77H|[12;2H|[12;77H|[13;2H|[13;77H|[14;2H|[14;77H|[15;2H|[15;77H|[16;2H+--------------------------------------------------------------------------+[17;2H>Use the ^ and v keys to select which entry is highlighted.>Press enter to boot the selected OS, ''e'' to edit the commands>before booting or ''c'' for a command-line.>[5;78H [5;3HDebian GNU/Linux, with Linux 3.2.9-x86 [5;76H[6;3HDebian GNU/Linux, with Linux 3.2.9-x86 (recovery mode) [6;76H[7;3HDebian GNU/Linux, with Linux 3.0.23-x86 [7;76H[8;3HDebian GNU/Linux, with Linux 3.0.23-x86 (recovery mode) [8;76H[9;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 [9;76H[10;3HDebian GNU/Linux, with Linux 2.6.32.49-x86 (recovery mode) [10;76H[11;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem [11;76H[12;3HDebian GNU/Linux, with Linux 2.6.32-5-686-bigmem (recovery mode) [12;76H[13;3HX en 4 Linux 3.2.9 x86 [13;76H[14;3H [14;76H[15;3H [15;76H[15;78H [13;76H[22;1H [13;76H[?25h[H[J[H[J __ __ _ _ _ ____> \ \/ /___ _ __ | || | / | |___ \ > \ // _ \ ''_ \ | || |_ | | __) | > / \ __/ | | | |__ _|| |_ / __/ > /_/\_\___|_| |_| |_|(_)_(_)_____| > > (XEN) Xen version 4.1.2 (root@uk.xensource.com) (gcc version 4.4.5 (Debian 4.4.5-8) ) Tue Mar 13 17:07:49 UTC 2012 > (XEN) Latest ChangeSet: unavailable > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=1024M com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009e000 (usable) > (XEN) 0000000000100000 - 00000000bf699000 (usable) > (XEN) 00000000bf699000 - 00000000bf6af000 (reserved) > (XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data) > (XEN) 00000000bf6ce000 - 00000000c0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fe000000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000240000000 (usable) > (XEN) System RAM: 8182MB (8378588kB) > (XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL ) > (XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624) > (XEN) ACPI: FACS BF6C6000, 0040 > (XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000240000000 > (XEN) Xen heap: 9MB (9752kB) > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000fe710 > (XEN) DMI 2.6 present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > (XEN) Processor #2 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > (XEN) Processor #4 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > (XEN) Processor #6 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > (XEN) Processor #1 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > (XEN) Processor #3 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > (XEN) Processor #5 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > (XEN) Processor #7 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > (XEN) ERST table is invalid > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2660.056 MHz processor. > (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 > (XEN) Intel machine check reporting enabled > (XEN) Intel VT-d Snoop Control enabled. > (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. > (XEN) Intel VT-d Queued Invalidation enabled. > (XEN) Intel VT-d Interrupt Remapping not enabled. > (XEN) Intel VT-d Shared EPT tables not enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > XEN) Allocated console ring of 64 KiB. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) EPT supports 2MB super page. > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Brought up 8 CPUs > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x639000 > (XEN) elf_parse_binary: phdr: paddr=0x1639000 memsz=0x3b8000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x19f1000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000 > (XEN) elf_xen_parse_note: ENTRY = 0xc1678000 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc1002000 > (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xc0000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xc0000000 > (XEN) virt_kstart = 0xc1000000 > (XEN) virt_kend = 0xc19f1000 > (XEN) virt_entry = 0xc1678000 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 32-bit, PAE, lsb > (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x19f1000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000234000000->0000000236000000 (236045 pages to be allocated) > (XEN) Init. ramdisk: 000000023ba0d000->000000023ffffe00 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c1000000->c19f1000 > (XEN) Init. ramdisk: c19f1000->c5fe3e00 > (XEN) Phys-Mach map: c5fe4000->c60e4000 > (XEN) Start info: c60e4000->c60e447c > (XEN) Page tables: c60e5000->c611c000 > (XEN) Boot stack: c611c000->c611d000 > (XEN) TOTAL: c0000000->c6400000 > (XEN) ENTRY ADDRESS: c1678000 > (XEN) Dom0 has maximum 8 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xc1000000 -> 0xc1639000 > (XEN) elf_load_binary: phdr 1 at 0xc1639000 -> 0xc16ea000 > (XEN) Scrubbing Free RAM: ......................................................................done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) > (XEN) Freed 172kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > [ 0.000000] Reserving virtual address space above 0xf5800000 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.9 (root@dt29) (gcc version 4.4.5 (Debian 4.4.5-8) ) #9 SMP Mon Mar 12 03:35:38 UTC 2012 > [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed > [ 0.000000] Released 98 pages of unused memory > [ 0.000000] Set 264649 page(s) to 1-1 mapping > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 00000000bf699000 (usable) > [ 0.000000] Xen: 00000000bf699000 - 00000000bf6af000 (reserved) > [ 0.000000] Xen: 00000000bf6af000 - 00000000bf6ce000 (ACPI data) > [ 0.000000] Xen: 00000000bf6ce000 - 00000000c0000000 (reserved) > [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 0000000240000000 (usable) > [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.6 present. > [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x1000000 > [ 0.000000] found SMP MP-table at [c00fe710] fe710 > [ 0.000000] init_memory_mapping: 0000000000000000-000000002cdfe000 > (XEN) mm.c:907:d0 Error getting mfn 3409e (pfn 55555555) from L1 entry 000000003409e023 for l1e_owner=0, pg_owner=0 > (XEN) mm.c:4962:d0 ptwr_emulate: fixing up invalid PAE PTE 000000003409e023 > (XEN) mm.c:907:d0 Error getting mfn 3409f (pfn 55555555) from L1 entry 000000003409f023 for l1e_owner=0, pg_owner=0 > (XEN) mm.c:4962:d0 ptwr_emulate: fixing up invalid PAE PTE 000000003409f023 > [ 0.000000] RAMDISK: 019f1000 - 05fe4000 > [ 0.000000] ACPI: RSDP 000f0aa0 00024 (v02 DELL ) > [ 0.000000] ACPI: XSDT 000f0ba0 0008C (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: FACP bf6c3bb4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: DSDT bf6af000 03E43 (v01 DELL PE_SC3 00000001 INTL 20050624) > [ 0.000000] ACPI: FACS bf6c6000 00040 > [ 0.000000] ACPI: APIC bf6c3478 00152 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: SPCR bf6c35cc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: HPET bf6c3620 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: XMAR bf6c365c 000A8 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: MCFG bf6c3850 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: WD__ bf6c3890 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: SLIC bf6c39c8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: ERST bf6b2fc4 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: HEST bf6b3234 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: BERT bf6b2e44 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: EINJ bf6b2e74 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: TCPA bf6c3b4c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000240000000 > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > [ 0.000000] Call Trace: > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 is causing this. Can you do one more check - and just try booting the 3.2 virgin and seeing how it works?
On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote:> > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > [ 0.000000] ------------[ cut here ]------------ > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > [ 0.000000] Hardware name: PowerEdge R310 > > [ 0.000000] Modules linked in: > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > [ 0.000000] Call Trace: > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > is causing this. Can you do one more check - and just try booting the 3.2 virgin > and seeing how it works?Sure, I''ll try it once I have a chance. Goncalo
On Tue, 13 Mar 2012, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > [ 0.000000] ------------[ cut here ]------------ > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > [ 0.000000] Hardware name: PowerEdge R310 > > > [ 0.000000] Modules linked in: > > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > > [ 0.000000] Call Trace: > > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > > is causing this. Can you do one more check - and just try booting the 3.2 virgin > > and seeing how it works? > > Sure, I''ll try it once I have a chance.With 3.2.0 + 4.1.2, all it took was booting domain0 Boot log attached. Goncalo> Goncalo > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Tue, Mar 13, 2012 at 07:09:17PM +0000, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > > [ 0.000000] ------------[ cut here ]------------ > > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > > [ 0.000000] Hardware name: PowerEdge R310 > > > > [ 0.000000] Modules linked in: > > > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > > > [ 0.000000] Call Trace: > > > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > > > > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > > > is causing this. Can you do one more check - and just try booting the 3.2 virgin > > > and seeing how it works? > > > > Sure, I''ll try it once I have a chance. > > With 3.2.0 + 4.1.2, all it took was booting domain0I am really perplexed. I just booted 4.1.2 + 3.2.9 and 3.2.0 and I had no trouble. Can you send me your .config file please? Oh wait, I am building 64-bit, you are doing 32-bit. Is your hypervisor 32-bit or 64-bit?> > Boot log attached. > > Goncalo > > > > Goncalo > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xen.org > > http://lists.xen.org/xen-devel> Script started on Tue 13 Mar 2012 19:04:33 GMT > goncalog@eire:~$ > goncalog@eire:~$ > goncalog@eire:~$ > goncalog@eire:~$ > goncalog@eire:~$ > goncalog@eire:~$ ssh dt29[4Pmuttssh dt29[Kssh dt29[4Pmuttan ioctlsendfilels[K^C > goncalog@eire:~$[5@(reverse-i-search)`'':[C-'': vi dt29-boot-4.1.2[3Pt'': xenuse -t dt29 [7Pgoncalog@eire:~$[C[C[C[C[C[C[C[C> [Enter `^Ec?'' for help] > [?25h[H[J[H[J __ __ _ _ _ ____ > \ \/ /___ _ __ | || | / | |___ \ > \ // _ \ ''_ \ | || |_ | | __) | > / \ __/ | | | |__ _|| |_ / __/ > /_/\_\___|_| |_| |_|(_)_(_)_____| > > (XEN) Xen version 4.1.2 (root@uk.xensource.com) (gcc version 4.4.5 (Debian 4.4.5-8) ) Tue Mar 13 17:07:49 UTC 2012 > (XEN) Latest ChangeSet: unavailable > (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 > (XEN) Command line: placeholder dom0_mem=1024M com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009e000 (usable) > (XEN) 0000000000100000 - 00000000bf699000 (usable) > (XEN) 00000000bf699000 - 00000000bf6af000 (reserved) > (XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data) > (XEN) 00000000bf6ce000 - 00000000c0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fe000000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000240000000 (usable) > (XEN) System RAM: 8182MB (8378588kB) > (XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL ) > (XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624) > (XEN) ACPI: FACS BF6C6000, 0040 > (XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000240000000 > (XEN) Xen heap: 9MB (9752kB) > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000fe710 > (XEN) DMI 2.6 present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > (XEN) Processor #2 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > (XEN) Processor #4 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > (XEN) Processor #6 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > (XEN) Processor #1 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > (XEN) Processor #3 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > (XEN) Processor #5 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > (XEN) Processor #7 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > (XEN) ERST table is invalid > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2660.033 MHz processor. > (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 > (XEN) Intel machine check reporting enabled > (XEN) Intel VT-d Snoop Control enabled. > (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. > (XEN) Intel VT-d Queued Invalidation enabled. > (XEN) Intel VT-d Interrupt Remapping not enabled. > (XEN) Intel VT-d Shared EPT tables not enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > XEN) Allocated console ring of 64 KiB. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) EPT supports 2MB super page. > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Brought up 8 CPUs > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x638000 > (XEN) elf_parse_binary: phdr: paddr=0x1638000 memsz=0x3b7000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x19ef000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000 > (XEN) elf_xen_parse_note: ENTRY = 0xc1676000 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc1002000 > (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xc0000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xc0000000 > (XEN) virt_kstart = 0xc1000000 > (XEN) virt_kend = 0xc19ef000 > (XEN) virt_entry = 0xc1676000 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 32-bit, PAE, lsb > (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x19ef000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000234000000->0000000236000000 (236052 pages to be allocated) > (XEN) Init. ramdisk: 000000023ba14000->000000023ffffa00 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c1000000->c19ef000 > (XEN) Init. ramdisk: c19ef000->c5fdaa00 > (XEN) Phys-Mach map: c5fdb000->c60db000 > (XEN) Start info: c60db000->c60db47c > (XEN) Page tables: c60dc000->c6113000 > (XEN) Boot stack: c6113000->c6114000 > (XEN) TOTAL: c0000000->c6400000 > (XEN) ENTRY ADDRESS: c1676000 > (XEN) Dom0 has maximum 8 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xc1000000 -> 0xc1638000 > (XEN) elf_load_binary: phdr 1 at 0xc1638000 -> 0xc16e8000 > (XEN) Scrubbing Free RAM: ......................................................................done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) > (XEN) Freed 172kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > [ 0.000000] Reserving virtual address space above 0xf5800000 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0 (root@dt29) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Tue Mar 13 18:37:14 UTC 2012 > [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed > [ 0.000000] Released 98 pages of unused memory > [ 0.000000] Set 264649 page(s) to 1-1 mapping > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 00000000bf699000 (usable) > [ 0.000000] Xen: 00000000bf699000 - 00000000bf6af000 (reserved) > [ 0.000000] Xen: 00000000bf6af000 - 00000000bf6ce000 (ACPI data) > [ 0.000000] Xen: 00000000bf6ce000 - 00000000c0000000 (reserved) > [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 0000000240000000 (usable) > [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.6 present. > [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x1000000 > [ 0.000000] found SMP MP-table at [c00fe710] fe710 > [ 0.000000] init_memory_mapping: 0000000000000000-000000002cdfe000 > (XEN) mm.c:907:d0 Error getting mfn 3409e (pfn 55555555) from L1 entry 000000003409e023 for l1e_owner=0, pg_owner=0 > (XEN) mm.c:4962:d0 ptwr_emulate: fixing up invalid PAE PTE 000000003409e023 > (XEN) mm.c:907:d0 Error getting mfn 3409f (pfn 55555555) from L1 entry 000000003409f023 for l1e_owner=0, pg_owner=0 > (XEN) mm.c:4962:d0 ptwr_emulate: fixing up invalid PAE PTE 000000003409f023 > [ 0.000000] RAMDISK: 019ef000 - 05fdb000 > [ 0.000000] ACPI: RSDP 000f0aa0 00024 (v02 DELL ) > [ 0.000000] ACPI: XSDT 000f0ba0 0008C (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: FACP bf6c3bb4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: DSDT bf6af000 03E43 (v01 DELL PE_SC3 00000001 INTL 20050624) > [ 0.000000] ACPI: FACS bf6c6000 00040 > [ 0.000000] ACPI: APIC bf6c3478 00152 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: SPCR bf6c35cc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: HPET bf6c3620 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: XMAR bf6c365c 000A8 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: MCFG bf6c3850 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: WD__ bf6c3890 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: SLIC bf6c39c8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: ERST bf6b2fc4 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: HEST bf6b3234 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: BERT bf6b2e44 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: EINJ bf6b2e74 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] ACPI: TCPA bf6c3b4c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000240000000 > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da23 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da24 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da25 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da26 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da27 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da28 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da29 ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da2a ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da2b ]--- > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > [ 0.000000] Call Trace: > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c1[ 4.991674] Freeing initrd memory: 71600k freed > [ 5.008319] audit: initializing netlink socket (disabled) > [ 5.008597] type=2000 audit(1331664964.980:1): initialized > [ 5.010609] highmem bounce pool size: 64 pages > [ 5.016079] VFS: Disk quotas dquot_6.5.2 > [ 5.016507] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 5.018142] NTFS driver 2.1.30 [Flags: R/W DEBUG]. > [ 5.018584] msgmni has been set to 1133 > [ 5.022247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [ 5.022706] io scheduler noop registered > [ 5.022949] io scheduler deadline registered > [ 5.023205] io scheduler cfq registered (default) > (XEN) physdev.c:155: dom0: wrong map_pirq type 3 > [ 5.025093] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt > [ 5.025379] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > [ 5.025689] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt > [ 5.025941] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > [ 5.026253] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt > [ 5.026528] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > [ 5.026784] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > [ 5.027357] isapnp: Scanning for PnP cards... > [ 5.381669] isapnp: No Plug & Play device found > [ 5.382025] Event-channel device installed. > [ 5.382518] xen-pciback: backend is vpci > [ 5.383566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > [ 5.723699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > [ 5.972246] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > [ 6.783904] hpet_acpi_add: no address or irqs in _CRS > [ 6.784282] Non-volatile memory driver v1.3 > [ 6.785060] telclk_interrup = 0xf non-mcpbl0010 hw. > [ 6.785310] Linux agpgart interface v0.103 > [ 6.787839] usbcore: registered new interface driver hwa-rc > [ 6.788090] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver > [ 6.788425] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 6.788703] ehci_hcd 0000:00:1a.0: EHCI Host Controller > [ 6.788959] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > [ 6.789475] ehci_hcd 0000:00:1a.0: debug port 2 > [ 6.793696] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fc000 > [ 6.807535] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 6.807838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 6.808090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.808545] usb usb1: Product: EHCI Host Controller > [ 6.808794] usb usb1: Manufacturer: Linux 3.2.0 ehci_hcd > [ 6.809068] usb usb1: SerialNumber: 0000:00:1a.0 > [ 6.809575] hub 1-0:1.0: USB hub found > [ 6.809829] hub 1-0:1.0: 2 ports detected > [ 6.810341] xen_map_pirq_gsi: returning irq 22 for gsi 22 > [ 6.810598] Already setup the GSI :22 > [ 6.810844] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 6.811123] ehci_hcd 0000:00:1d.0: EHCI Host Controller > [ 6.811384] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > [ 6.811918] ehci_hcd 0000:00:1d.0: debug port 2 > [ 6.816066] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000 > [ 6.831542] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 6.831853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 6.832103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 6.832555] usb usb2: Product: EHCI Host Controller > [ 6.832825] usb usb2: Manufacturer: Linux 3.2.0 ehci_hcd > [ 6.833075] usb usb2: SerialNumber: 0000:00:1d.0 > [ 6.833563] hub 2-0:1.0: USB hub found > [ 6.833815] hub 2-0:1.0: 2 ports detected > [ 6.834353] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver > [ 6.834647] uhci_hcd: USB Universal Host Controller Interface driver > [ 6.834950] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 > [ 6.835373] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 6.836527] i8042: No controller found > [ 6.836869] mousedev: PS/2 mouse device common for all mice > [ 6.837581] rtc_cmos 00:04: RTC can wake from S4 > [ 6.838042] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 6.843434] rtc0: alarms up to one day, y3k, 242 bytes nvram > [ 6.843793] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) > [ 6.844260] wdt: Xen WatchDog Timer Driver v0.01 > [ 6.844571] wdt: cannot register miscdev on minor=130 (-16) > [ 6.844823] wdt: probe of wdt failed with error -16 > [ 6.845072] SoftDog: cannot register miscdev on minor=130 (err=-16) > [ 6.845460] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > [ 6.846745] TCP cubic registered > [ 6.847299] NET: Registered protocol family 10 > [ 6.849386] Mobile IPv6 > [ 6.849630] NET: Registered protocol family 17 > [ 6.850535] sctp: Hash tables configured (established 65536 bind 65536) > [ 6.851272] Registering the dns_resolver key type > [ 6.851552] Using IPI No-Shortcut mode > [ 6.852053] registered taskstats version 1 > [ 6.853100] console [netcon0] enabled > [ 6.853344] netconsole: network logging started > [ 6.853690] rtc_cmos 00:04: setting system clock to 2012-03-13 18:56:06 UTC (1331664966) > [ 6.854236] Initializing network drop monitor service > [ 6.854866] Freeing unused kernel memory: 436k freed > [ 6.856484] Write protecting the kernel text: 3912k > [ 6.857532] Write protecting the kernel read-only data: 2456k > [ 6.857798] NX-protecting the kernel data: 4280k > Loading, please wait... > [ 6.901109] udev[133]: starting version 164 > [ 6.998543] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) > [ 6.999083] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 6.999361] Already setup the GSI :16 > [ 6.999625] bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 7.003132] SCSI subsystem initialized > [ 7.008819] bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr 84:2b:2b:52:88:2a > [ 7.009413] bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 7.009804] Fusion MPT base driver 3.04.20 > [ 7.010100] Copyright (c) 1999-2008 LSI Corporation > [ 7.013277] Fusion MPT SAS Host driver 3.04.20 > [ 7.013638] xen_map_pirq_gsi: returning irq 16 for gsi 16 > [ 7.013644] bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr 84:2b:2b:52:88:2b > [ 7.014399] Already setup the GSI :16 > [ 7.014663] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 7.015118] mptbase: ioc0: Initiating bringup > [ 7.119559] usb 1-1: new high-speed USB device number 2 using ehci_hcd > [ 7.252020] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > [ 7.252296] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 7.252977] hub 1-1:1.0: USB hub found > [ 7.253415] hub 1-1:1.0: 6 ports detected > [ 7.363572] usb 2-1: new high-speed USB device number 2 using ehci_hcd > [ 7.495891] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > [ 7.496186] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 7.496834] hub 2-1:1.0: USB hub found > [ 7.497307] hub 2-1:1.0: 8 ports detected > [ 7.571612] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd > [ 7.663901] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 > [ 7.664200] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 7.664957] hub 1-1.1:1.0: USB hub found > [ 7.665380] hub 1-1.1:1.0: 4 ports detected > [ 7.715557] ioc0: LSISAS1068E B3: Capabilities={Initiator} > [ 24.278976] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 > [ 24.316004] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 > [ 24.328504] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HE253GJ 0001 PQ: 0 ANSI: 5 > [ 24.343216] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) > [ 24.456939] sd 0:0:0:0: [sda] Write Protect is off > [ 24.468646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA > [ 24.596708] sda: sda1 sda2 < sda5 > > [ 24.708503] sd 0:0:0:0: [sda] Attached SCSI disk > Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. > Begin: Running /scripts/local-premount ... [ 25.000780] PM: Starting manual resume from disk > done. > [ 25.027113] kjournald starting. Commit interval 5 seconds > [ 25.027187] EXT3-fs (sda1): mounted filesystem with ordered data mode > Begin: Running /scripts/local-bottom ... done. > done. > Begin: Running /scripts/init-bottom ... done. >INIT: version 2.88 booting> Using makefile-style concurrent boot in runlevel S. > Starting the hotplug events dispatcher: udevd[ 25.989886] udev[352]: starting version 164 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...[ 26.364902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 26.365747] ACPI: Power Button [PWRF] > done. > Activating swap...[ 26.973701] Adding 6066172k swap on /dev/sda5. Priority:-1 extents:1 across:6066172k > done. > Checking root file system...fsck from util-linux-ng 2.17.2 > /: clean, 429888/14884864 files, 4781808/59517952 blocks (check in 3 mounts) > done. > [ 27.107722] EXT3-fs (sda1): using internal journal > Cleaning up ifupdown.... > [ 27.238878] loop: module loaded > Loading kernel modules...done. > Setting up networking.... > Activating lvm and md swap...done. > Checking file systems...fsck from util-linux-ng 2.17.2 > done. > Mounting local filesystems...done. > Activating swapfile swap...done. > Cleaning up temporary files.... > Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 > Copyright 2004-2010 Internet Systems Consortium. > All rights reserved. > For info, please visit https://www.isc.org/software/dhcp/ > > [ 28.189095] bnx2 0000:02:00.0: eth0: using MSIX > [ 28.189494] ADDRCONF(NETDEV_UP): eth0: link is not ready > Listening on LPF/eth0/84:2b:2b:52:88:2a > Sending on LPF/eth0/84:2b:2b:52:88:2a > Sending on Socket/fallback > Setting kernel variables ...done. > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 > [ 31.403226] bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex > [ 31.403909] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 > DHCPOFFER from 10.80.224.1 > DHCPREQUEST on eth0 to 255.255.255.255 port 67 > DHCPACK from 10.80.224.1 > bound to 10.80.227.196 -- renewal in 20979 seconds. > done. > Starting portmap daemon.... > Starting NFS common utilities: statd. > Cleaning up temporary files.... > Setting console screen modes and fonts. > cannot (un)set powersave mode > [9;30][14;30]Loading the saved-state of the serial devices... > [ 74.067406] ttyS0: LSR safety check engaged! > [ 74.069153] ttyS0: LSR safety check engaged! > /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A > /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A >INIT: Entering runlevel: 2> Using makefile-style concurrent boot in runlevel 2. > Starting portmap daemon...Already running.. > Starting NFS common utilities: statd. > Starting enhanced syslogd: rsyslogd. > Enabling additional executable binary formats: binfmt-support. > [ 74.660094] BUG: unable to handle kernel paging request at 000012b7 > [ 74.660475] IP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 > [ 74.660763] *pdpt = 0000000004d92001 *pde = 0000000000000000 > [ 74.661083] Oops: 0000 [#1] SMP > [ 74.661398] Modules linked in: binfmt_misc loop button processor thermal_sys hwmon sd_mod mptsas mptscsih mptbase scsi_transport_sas scsi_mod bnx2 [last unloaded: scsi_wait_scan] > [ 74.662605] > [ 74.662844] Pid: 0, comm: swapper/0 Tainted: G W 3.2.0 #1 Dell Inc. PowerEdge R310/05XKKK > [ 74.663430] EIP: 0061:[<c1268fea>] EFLAGS: 00010202 CPU: 0 > [ 74.663681] EIP is at is_xen_swiotlb_buffer+0x35/0x80 > [ 74.663932] EAX: 0000006d EBX: ffffffff ECX: c1777000 EDX: ffffffff > [ 74.664186] ESI: 00000000 EDI: 00000002 EBP: 00000000 ESP: e3c0fec4 > [ 74.664463] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 > [ 74.664709] Process swapper/0 (pid: 0, ti=e3c0e000 task=c163f060 task.ti=c1638000) > [ 74.665162] Stack: > [ 74.665405] 00000000 00000000 c1269074 ffffffff e3e2a860 00000092 c5760480 efa3a3e0 > [ 74.666155] c1269137 c5b2dec0 c1269146 00000092 00000002 00000000 ed62c57c 00000092 > [ 74.666882] 00000002 007d0000 e867d120 0000007c e3c02300 e3c0ff80 c10d5d1c 8080017c > [ 74.667639] Call Trace: > [ 74.667885] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > [ 74.668141] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > [ 74.668397] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > [ 74.668687] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > [ 74.668938] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > [ 74.669189] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > [ 74.669442] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > [ 74.669697] [<c1047202>] ? irq_enter+0x49/0x49 > [ 74.669978] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > [ 74.670230] [<c1047202>] ? irq_enter+0x49/0x49 > [ 74.670480] [<c10472aa>] ? __do_softirq+0xa8/0x168 > [ 74.670732] [<c1047202>] ? irq_enter+0x49/0x49 > [ 74.670982] <IRQ> > [ 74.671291] [<c10470d8>] ? irq_exit+0x2f/0x91 > [ 74.671545] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > [ 74.671799] [<c13d0647>] ? xen_do_upcall+0x7/0xc > [ 74.672051] [<c106007b>] ? update_wall_time+0x20c/0x3ef > [ 74.672301] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > [ 74.672555] [<c1006772>] ? xen_safe_halt+0xf/0x1b > [ 74.672834] [<c10136da>] ? default_idle+0x65/0xb8 > [ 74.673089] [<c100c220>] ? cpu_idle+0x61/0x7d > [ 74.673347] [<c16767f5>] ? start_kernel+0x34a/0x34d > [ 74.673600] [<c1678258>] ? xen_start_kernel+0x554/0x55b > [ 74.673850] Code: ff ff ff 89 c3 e8 cd e3 d9 ff 39 f0 b8 ff ff ff ff 0f 45 d8 89 d8 c1 e8 0e 0f be 80 e0 24 67 c1 85 c0 78 4d 8b 14 85 c0 24 67 c1 <8b> 82 b8 12 00 00 03 82 b0 12 00 00 39 c3 73 36 a1 e8 88 76 c1 > [ 74.676839] EIP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 SS:ESP 0069:e3c0fec4 > [ 74.677360] CR2: 00000000000012b7 > [ 74.677608] ---[ end trace 4eaa2a86a8e2da48 ]--- > [ 74.677856] Kernel panic - not syncing: Fatal exception in interrupt > [ 74.678108] Pid: 0, comm: swapper/0 Tainted: G D W 3.2.0 #1 > [ 74.678391] Call Trace: > [ 74.678639] [<c13cd2f6>] ? panic+0x4d/0x157 > [ 74.678889] [<c100eeec>] ? oops_end+0xad/0xb8 > [ 74.679140] [<c102a7c8>] ? bad_area_nosemaphore+0xa/0xc > [ 74.679393] [<c102abd5>] ? do_page_fault+0x167/0x31a > [ 74.679676] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > [ 74.679931] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > [ 74.680185] [<c100b842>] ? __spin_time_accum+0x26/0x36 > [ 74.680440] [<c100ba73>] ? __xen_spin_lock+0xb4/0xc8 > [ 74.680693] [<c100673c>] ? xen_force_evtchn_callback+0xc/0x10 > [ 74.680977] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > [ 74.681229] [<c13cfde6>] ? error_code+0x5a/0x60 > [ 74.681481] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > [ 74.681729] [<c1268fea>] ? is_xen_swiotlb_buffer+0x35/0x80 > [ 74.681979] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > [ 74.682232] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > [ 74.682519] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > [ 74.682775] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > [ 74.683027] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > [ 74.683278] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > [ 74.683536] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > [ 74.683816] [<c1047202>] ? irq_enter+0x49/0x49 > [ 74.684067] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > [ 74.684317] [<c1047202>] ? irq_enter+0x49/0x49 > [ 74.684569] [<c10472aa>] ? __do_softirq+0xa8/0x168 > [ 74.684820] [<c1047202>] ? irq_enter+0x49/0x49 > [ 74.685066] <IRQ> [<c10470d8>] ? irq_exit+0x2f/0x91 > [ 74.685384] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > [ 74.685638] [<c13d0647>] ? xen_do_upcall+0x7/0xc > [ 74.685888] [<c106007b>] ? update_wall_time+0x20c/0x3ef > [ 74.691270] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > [ 74.691522] [<c1006772>] ? xen_safe_halt+0xf/0x1b > [ 74.691770] [<c10136da>] ? default_idle+0x65/0xb8 > [ 74.692053] [<c100c220>] ? cpu_idle+0x61/0x7d > [ 74.692304] [<c16767f5>] ? start_kernel+0x34a/0x34d > [ 74.692557] [<c1678258>] ? xen_start_kernel+0x554/0x55b > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > [disconnect] > goncalog@eire:~$ xenuse -t dt29[Kexit > > Script done on Tue 13 Mar 2012 19:06:30 GMT
On Tue, Mar 13, 2012 at 10:34:38PM +0000, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > On Tue, Mar 13, 2012 at 07:09:17PM +0000, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > > > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > > > > [ 0.000000] ------------[ cut here ]------------ > > > > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > > > > [ 0.000000] Hardware name: PowerEdge R310 > > > > > > [ 0.000000] Modules linked in: > > > > > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > > > > > [ 0.000000] Call Trace: > > > > > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > > > > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > > > > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > > > > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > > > > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > > > > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > > > > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > > > > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > > > > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > > > > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > > > > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > > > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > > > > > > > > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > > > > > is causing this. Can you do one more check - and just try booting the 3.2 virgin > > > > > and seeing how it works? > > > > > > > > Sure, I''ll try it once I have a chance. > > > > > > With 3.2.0 + 4.1.2, all it took was booting domain0 > > > > I am really perplexed. I just booted 4.1.2 + 3.2.9 and 3.2.0 and I had no trouble. > > Can you send me your .config file please? > > I can, see the attached config file1 > > > Oh wait, I am building 64-bit, you are doing 32-bit. Is your hypervisor 32-bit or > > 64-bit? > > It is 32bit, as is the remaining setup. Is this not a valid > configuration?It is. I just did a compile as well with 32-bit and I am not seeing the issues.. Must be something with the .config.
On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote:> On Tue, Mar 13, 2012 at 07:09:17PM +0000, Goncalo Gomes wrote: > > On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > > > [ 0.000000] ------------[ cut here ]------------ > > > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > > > [ 0.000000] Hardware name: PowerEdge R310 > > > > > [ 0.000000] Modules linked in: > > > > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > > > > [ 0.000000] Call Trace: > > > > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > > > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > > > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > > > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > > > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > > > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > > > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > > > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > > > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > > > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > > > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > > > > > > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > > > > is causing this. Can you do one more check - and just try booting the 3.2 virgin > > > > and seeing how it works? > > > > > > Sure, I''ll try it once I have a chance. > > > > With 3.2.0 + 4.1.2, all it took was booting domain0 > > I am really perplexed. I just booted 4.1.2 + 3.2.9 and 3.2.0 and I had no trouble. > Can you send me your .config file please?I can, see the attached config file1> Oh wait, I am building 64-bit, you are doing 32-bit. Is your hypervisor 32-bit or > 64-bit?It is 32bit, as is the remaining setup. Is this not a valid configuration? Goncalo> > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da2b ]--- > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > [ 0.000000] ------------[ cut here ]------------ > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > [ 0.000000] Hardware name: PowerEdge R310 > > [ 0.000000] Modules linked in: > > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > > [ 0.000000] Call Trace: > > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > [ 0.000000] [<c1[ 4.991674] Freeing initrd memory: 71600k freed > > [ 5.008319] audit: initializing netlink socket (disabled) > > [ 5.008597] type=2000 audit(1331664964.980:1): initialized > > [ 5.010609] highmem bounce pool size: 64 pages > > [ 5.016079] VFS: Disk quotas dquot_6.5.2 > > [ 5.016507] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > [ 5.018142] NTFS driver 2.1.30 [Flags: R/W DEBUG]. > > [ 5.018584] msgmni has been set to 1133 > > [ 5.022247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > > [ 5.022706] io scheduler noop registered > > [ 5.022949] io scheduler deadline registered > > [ 5.023205] io scheduler cfq registered (default) > > (XEN) physdev.c:155: dom0: wrong map_pirq type 3 > > [ 5.025093] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt > > [ 5.025379] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > > [ 5.025689] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt > > [ 5.025941] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > > [ 5.026253] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt > > [ 5.026528] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > > [ 5.026784] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > > [ 5.027357] isapnp: Scanning for PnP cards... > > [ 5.381669] isapnp: No Plug & Play device found > > [ 5.382025] Event-channel device installed. > > [ 5.382518] xen-pciback: backend is vpci > > [ 5.383566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > [ 5.723699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > [ 5.972246] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > [ 6.783904] hpet_acpi_add: no address or irqs in _CRS > > [ 6.784282] Non-volatile memory driver v1.3 > > [ 6.785060] telclk_interrup = 0xf non-mcpbl0010 hw. > > [ 6.785310] Linux agpgart interface v0.103 > > [ 6.787839] usbcore: registered new interface driver hwa-rc > > [ 6.788090] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver > > [ 6.788425] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > [ 6.788703] ehci_hcd 0000:00:1a.0: EHCI Host Controller > > [ 6.788959] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > > [ 6.789475] ehci_hcd 0000:00:1a.0: debug port 2 > > [ 6.793696] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fc000 > > [ 6.807535] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > > [ 6.807838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > > [ 6.808090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > [ 6.808545] usb usb1: Product: EHCI Host Controller > > [ 6.808794] usb usb1: Manufacturer: Linux 3.2.0 ehci_hcd > > [ 6.809068] usb usb1: SerialNumber: 0000:00:1a.0 > > [ 6.809575] hub 1-0:1.0: USB hub found > > [ 6.809829] hub 1-0:1.0: 2 ports detected > > [ 6.810341] xen_map_pirq_gsi: returning irq 22 for gsi 22 > > [ 6.810598] Already setup the GSI :22 > > [ 6.810844] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > [ 6.811123] ehci_hcd 0000:00:1d.0: EHCI Host Controller > > [ 6.811384] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > > [ 6.811918] ehci_hcd 0000:00:1d.0: debug port 2 > > [ 6.816066] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000 > > [ 6.831542] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > > [ 6.831853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > > [ 6.832103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > [ 6.832555] usb usb2: Product: EHCI Host Controller > > [ 6.832825] usb usb2: Manufacturer: Linux 3.2.0 ehci_hcd > > [ 6.833075] usb usb2: SerialNumber: 0000:00:1d.0 > > [ 6.833563] hub 2-0:1.0: USB hub found > > [ 6.833815] hub 2-0:1.0: 2 ports detected > > [ 6.834353] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver > > [ 6.834647] uhci_hcd: USB Universal Host Controller Interface driver > > [ 6.834950] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 > > [ 6.835373] i8042: PNP: No PS/2 controller found. Probing ports directly. > > [ 6.836527] i8042: No controller found > > [ 6.836869] mousedev: PS/2 mouse device common for all mice > > [ 6.837581] rtc_cmos 00:04: RTC can wake from S4 > > [ 6.838042] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > > [ 6.843434] rtc0: alarms up to one day, y3k, 242 bytes nvram > > [ 6.843793] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) > > [ 6.844260] wdt: Xen WatchDog Timer Driver v0.01 > > [ 6.844571] wdt: cannot register miscdev on minor=130 (-16) > > [ 6.844823] wdt: probe of wdt failed with error -16 > > [ 6.845072] SoftDog: cannot register miscdev on minor=130 (err=-16) > > [ 6.845460] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > > [ 6.846745] TCP cubic registered > > [ 6.847299] NET: Registered protocol family 10 > > [ 6.849386] Mobile IPv6 > > [ 6.849630] NET: Registered protocol family 17 > > [ 6.850535] sctp: Hash tables configured (established 65536 bind 65536) > > [ 6.851272] Registering the dns_resolver key type > > [ 6.851552] Using IPI No-Shortcut mode > > [ 6.852053] registered taskstats version 1 > > [ 6.853100] console [netcon0] enabled > > [ 6.853344] netconsole: network logging started > > [ 6.853690] rtc_cmos 00:04: setting system clock to 2012-03-13 18:56:06 UTC (1331664966) > > [ 6.854236] Initializing network drop monitor service > > [ 6.854866] Freeing unused kernel memory: 436k freed > > [ 6.856484] Write protecting the kernel text: 3912k > > [ 6.857532] Write protecting the kernel read-only data: 2456k > > [ 6.857798] NX-protecting the kernel data: 4280k > > Loading, please wait... > > [ 6.901109] udev[133]: starting version 164 > > [ 6.998543] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) > > [ 6.999083] xen_map_pirq_gsi: returning irq 16 for gsi 16 > > [ 6.999361] Already setup the GSI :16 > > [ 6.999625] bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > [ 7.003132] SCSI subsystem initialized > > [ 7.008819] bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr 84:2b:2b:52:88:2a > > [ 7.009413] bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > > [ 7.009804] Fusion MPT base driver 3.04.20 > > [ 7.010100] Copyright (c) 1999-2008 LSI Corporation > > [ 7.013277] Fusion MPT SAS Host driver 3.04.20 > > [ 7.013638] xen_map_pirq_gsi: returning irq 16 for gsi 16 > > [ 7.013644] bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr 84:2b:2b:52:88:2b > > [ 7.014399] Already setup the GSI :16 > > [ 7.014663] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > [ 7.015118] mptbase: ioc0: Initiating bringup > > [ 7.119559] usb 1-1: new high-speed USB device number 2 using ehci_hcd > > [ 7.252020] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > > [ 7.252296] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > [ 7.252977] hub 1-1:1.0: USB hub found > > [ 7.253415] hub 1-1:1.0: 6 ports detected > > [ 7.363572] usb 2-1: new high-speed USB device number 2 using ehci_hcd > > [ 7.495891] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > > [ 7.496186] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > [ 7.496834] hub 2-1:1.0: USB hub found > > [ 7.497307] hub 2-1:1.0: 8 ports detected > > [ 7.571612] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd > > [ 7.663901] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 > > [ 7.664200] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > [ 7.664957] hub 1-1.1:1.0: USB hub found > > [ 7.665380] hub 1-1.1:1.0: 4 ports detected > > [ 7.715557] ioc0: LSISAS1068E B3: Capabilities={Initiator} > > [ 24.278976] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 > > [ 24.316004] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 > > [ 24.328504] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HE253GJ 0001 PQ: 0 ANSI: 5 > > [ 24.343216] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) > > [ 24.456939] sd 0:0:0:0: [sda] Write Protect is off > > [ 24.468646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA > > [ 24.596708] sda: sda1 sda2 < sda5 > > > [ 24.708503] sd 0:0:0:0: [sda] Attached SCSI disk > > Begin: Loading essential drivers ... done. > > Begin: Running /scripts/init-premount ... done. > > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. > > Begin: Running /scripts/local-premount ... [ 25.000780] PM: Starting manual resume from disk > > done. > > [ 25.027113] kjournald starting. Commit interval 5 seconds > > [ 25.027187] EXT3-fs (sda1): mounted filesystem with ordered data mode > > Begin: Running /scripts/local-bottom ... done. > > done. > > Begin: Running /scripts/init-bottom ... done. > > > INIT: version 2.88 booting > > > Using makefile-style concurrent boot in runlevel S. > > Starting the hotplug events dispatcher: udevd[ 25.989886] udev[352]: starting version 164 > > . > > Synthesizing the initial hotplug events...done. > > Waiting for /dev to be fully populated...[ 26.364902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > > [ 26.365747] ACPI: Power Button [PWRF] > > done. > > Activating swap...[ 26.973701] Adding 6066172k swap on /dev/sda5. Priority:-1 extents:1 across:6066172k > > done. > > Checking root file system...fsck from util-linux-ng 2.17.2 > > /: clean, 429888/14884864 files, 4781808/59517952 blocks (check in 3 mounts) > > done. > > [ 27.107722] EXT3-fs (sda1): using internal journal > > Cleaning up ifupdown.... > > [ 27.238878] loop: module loaded > > Loading kernel modules...done. > > Setting up networking.... > > Activating lvm and md swap...done. > > Checking file systems...fsck from util-linux-ng 2.17.2 > > done. > > Mounting local filesystems...done. > > Activating swapfile swap...done. > > Cleaning up temporary files.... > > Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 > > Copyright 2004-2010 Internet Systems Consortium. > > All rights reserved. > > For info, please visit https://www.isc.org/software/dhcp/ > > > > [ 28.189095] bnx2 0000:02:00.0: eth0: using MSIX > > [ 28.189494] ADDRCONF(NETDEV_UP): eth0: link is not ready > > Listening on LPF/eth0/84:2b:2b:52:88:2a > > Sending on LPF/eth0/84:2b:2b:52:88:2a > > Sending on Socket/fallback > > Setting kernel variables ...done. > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 > > [ 31.403226] bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex > > [ 31.403909] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 > > DHCPOFFER from 10.80.224.1 > > DHCPREQUEST on eth0 to 255.255.255.255 port 67 > > DHCPACK from 10.80.224.1 > > bound to 10.80.227.196 -- renewal in 20979 seconds. > > done. > > Starting portmap daemon.... > > Starting NFS common utilities: statd. > > Cleaning up temporary files.... > > Setting console screen modes and fonts. > > cannot (un)set powersave mode > > [9;30][14;30]Loading the saved-state of the serial devices... > > [ 74.067406] ttyS0: LSR safety check engaged! > > [ 74.069153] ttyS0: LSR safety check engaged! > > /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A > > /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A > > > INIT: Entering runlevel: 2 > > > Using makefile-style concurrent boot in runlevel 2. > > Starting portmap daemon...Already running.. > > Starting NFS common utilities: statd. > > Starting enhanced syslogd: rsyslogd. > > Enabling additional executable binary formats: binfmt-support. > > [ 74.660094] BUG: unable to handle kernel paging request at 000012b7 > > [ 74.660475] IP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 > > [ 74.660763] *pdpt = 0000000004d92001 *pde = 0000000000000000 > > [ 74.661083] Oops: 0000 [#1] SMP > > [ 74.661398] Modules linked in: binfmt_misc loop button processor thermal_sys hwmon sd_mod mptsas mptscsih mptbase scsi_transport_sas scsi_mod bnx2 [last unloaded: scsi_wait_scan] > > [ 74.662605] > > [ 74.662844] Pid: 0, comm: swapper/0 Tainted: G W 3.2.0 #1 Dell Inc. PowerEdge R310/05XKKK > > [ 74.663430] EIP: 0061:[<c1268fea>] EFLAGS: 00010202 CPU: 0 > > [ 74.663681] EIP is at is_xen_swiotlb_buffer+0x35/0x80 > > [ 74.663932] EAX: 0000006d EBX: ffffffff ECX: c1777000 EDX: ffffffff > > [ 74.664186] ESI: 00000000 EDI: 00000002 EBP: 00000000 ESP: e3c0fec4 > > [ 74.664463] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 > > [ 74.664709] Process swapper/0 (pid: 0, ti=e3c0e000 task=c163f060 task.ti=c1638000) > > [ 74.665162] Stack: > > [ 74.665405] 00000000 00000000 c1269074 ffffffff e3e2a860 00000092 c5760480 efa3a3e0 > > [ 74.666155] c1269137 c5b2dec0 c1269146 00000092 00000002 00000000 ed62c57c 00000092 > > [ 74.666882] 00000002 007d0000 e867d120 0000007c e3c02300 e3c0ff80 c10d5d1c 8080017c > > [ 74.667639] Call Trace: > > [ 74.667885] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > > [ 74.668141] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > > [ 74.668397] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > > [ 74.668687] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > > [ 74.668938] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > > [ 74.669189] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > > [ 74.669442] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > > [ 74.669697] [<c1047202>] ? irq_enter+0x49/0x49 > > [ 74.669978] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > > [ 74.670230] [<c1047202>] ? irq_enter+0x49/0x49 > > [ 74.670480] [<c10472aa>] ? __do_softirq+0xa8/0x168 > > [ 74.670732] [<c1047202>] ? irq_enter+0x49/0x49 > > [ 74.670982] <IRQ> > > [ 74.671291] [<c10470d8>] ? irq_exit+0x2f/0x91 > > [ 74.671545] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > > [ 74.671799] [<c13d0647>] ? xen_do_upcall+0x7/0xc > > [ 74.672051] [<c106007b>] ? update_wall_time+0x20c/0x3ef > > [ 74.672301] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > > [ 74.672555] [<c1006772>] ? xen_safe_halt+0xf/0x1b > > [ 74.672834] [<c10136da>] ? default_idle+0x65/0xb8 > > [ 74.673089] [<c100c220>] ? cpu_idle+0x61/0x7d > > [ 74.673347] [<c16767f5>] ? start_kernel+0x34a/0x34d > > [ 74.673600] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > [ 74.673850] Code: ff ff ff 89 c3 e8 cd e3 d9 ff 39 f0 b8 ff ff ff ff 0f 45 d8 89 d8 c1 e8 0e 0f be 80 e0 24 67 c1 85 c0 78 4d 8b 14 85 c0 24 67 c1 <8b> 82 b8 12 00 00 03 82 b0 12 00 00 39 c3 73 36 a1 e8 88 76 c1 > > [ 74.676839] EIP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 SS:ESP 0069:e3c0fec4 > > [ 74.677360] CR2: 00000000000012b7 > > [ 74.677608] ---[ end trace 4eaa2a86a8e2da48 ]--- > > [ 74.677856] Kernel panic - not syncing: Fatal exception in interrupt > > [ 74.678108] Pid: 0, comm: swapper/0 Tainted: G D W 3.2.0 #1 > > [ 74.678391] Call Trace: > > [ 74.678639] [<c13cd2f6>] ? panic+0x4d/0x157 > > [ 74.678889] [<c100eeec>] ? oops_end+0xad/0xb8 > > [ 74.679140] [<c102a7c8>] ? bad_area_nosemaphore+0xa/0xc > > [ 74.679393] [<c102abd5>] ? do_page_fault+0x167/0x31a > > [ 74.679676] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > > [ 74.679931] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > > [ 74.680185] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > [ 74.680440] [<c100ba73>] ? __xen_spin_lock+0xb4/0xc8 > > [ 74.680693] [<c100673c>] ? xen_force_evtchn_callback+0xc/0x10 > > [ 74.680977] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > > [ 74.681229] [<c13cfde6>] ? error_code+0x5a/0x60 > > [ 74.681481] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > > [ 74.681729] [<c1268fea>] ? is_xen_swiotlb_buffer+0x35/0x80 > > [ 74.681979] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > > [ 74.682232] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > > [ 74.682519] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > > [ 74.682775] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > > [ 74.683027] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > > [ 74.683278] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > > [ 74.683536] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > > [ 74.683816] [<c1047202>] ? irq_enter+0x49/0x49 > > [ 74.684067] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > > [ 74.684317] [<c1047202>] ? irq_enter+0x49/0x49 > > [ 74.684569] [<c10472aa>] ? __do_softirq+0xa8/0x168 > > [ 74.684820] [<c1047202>] ? irq_enter+0x49/0x49 > > [ 74.685066] <IRQ> [<c10470d8>] ? irq_exit+0x2f/0x91 > > [ 74.685384] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > > [ 74.685638] [<c13d0647>] ? xen_do_upcall+0x7/0xc > > [ 74.685888] [<c106007b>] ? update_wall_time+0x20c/0x3ef > > [ 74.691270] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > > [ 74.691522] [<c1006772>] ? xen_safe_halt+0xf/0x1b > > [ 74.691770] [<c10136da>] ? default_idle+0x65/0xb8 > > [ 74.692053] [<c100c220>] ? cpu_idle+0x61/0x7d > > [ 74.692304] [<c16767f5>] ? start_kernel+0x34a/0x34d > > [ 74.692557] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > > [disconnect] > > goncalog@eire:~$ xenuse -t dt29[Kexit > > > > Script done on Tue 13 Mar 2012 19:06:30 GMT >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Tue, Mar 13, 2012 at 10:34:38PM +0000, Goncalo Gomes wrote:> On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > On Tue, Mar 13, 2012 at 07:09:17PM +0000, Goncalo Gomes wrote: > > > On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > > > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > > > > [ 0.000000] ------------[ cut here ]------------ > > > > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > > > > [ 0.000000] Hardware name: PowerEdge R310 > > > > > > [ 0.000000] Modules linked in: > > > > > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > > > > > [ 0.000000] Call Trace: > > > > > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > > > > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > > > > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > > > > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > > > > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > > > > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > > > > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > > > > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > > > > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > > > > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > > > > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > > > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > > > > > > > > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > > > > > is causing this. Can you do one more check - and just try booting the 3.2 virgin > > > > > and seeing how it works? > > > > > > > > Sure, I''ll try it once I have a chance. > > > > > > With 3.2.0 + 4.1.2, all it took was booting domain0 > > > > I am really perplexed. I just booted 4.1.2 + 3.2.9 and 3.2.0 and I had no trouble. > > Can you send me your .config file please? > > I can, see the attached config file1 > > > Oh wait, I am building 64-bit, you are doing 32-bit. Is your hypervisor 32-bit or > > 64-bit? > > It is 32bit, as is the remaining setup. Is this not a valid > configuration? > > GoncaloDave, Did you see something similar with the PV hugepages? This is upstream kernel without the PV hugepages, but I wonder if this is due to some CONFIG_ option being turned on in the 32-bit build??> > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > > > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > > > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > > > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > > > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > > > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > > > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > > > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > > > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > > > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da2b ]--- > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > [ 0.000000] ------------[ cut here ]------------ > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > [ 0.000000] Hardware name: PowerEdge R310 > > > [ 0.000000] Modules linked in: > > > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > > > [ 0.000000] Call Trace: > > > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > > > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > > > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > > > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > > > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > > > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > > > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > > > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > > > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > > [ 0.000000] [<c1[ 4.991674] Freeing initrd memory: 71600k freed > > > [ 5.008319] audit: initializing netlink socket (disabled) > > > [ 5.008597] type=2000 audit(1331664964.980:1): initialized > > > [ 5.010609] highmem bounce pool size: 64 pages > > > [ 5.016079] VFS: Disk quotas dquot_6.5.2 > > > [ 5.016507] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > > [ 5.018142] NTFS driver 2.1.30 [Flags: R/W DEBUG]. > > > [ 5.018584] msgmni has been set to 1133 > > > [ 5.022247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > > > [ 5.022706] io scheduler noop registered > > > [ 5.022949] io scheduler deadline registered > > > [ 5.023205] io scheduler cfq registered (default) > > > (XEN) physdev.c:155: dom0: wrong map_pirq type 3 > > > [ 5.025093] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt > > > [ 5.025379] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > > > [ 5.025689] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt > > > [ 5.025941] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > > > [ 5.026253] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt > > > [ 5.026528] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > > > [ 5.026784] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > > > [ 5.027357] isapnp: Scanning for PnP cards... > > > [ 5.381669] isapnp: No Plug & Play device found > > > [ 5.382025] Event-channel device installed. > > > [ 5.382518] xen-pciback: backend is vpci > > > [ 5.383566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > [ 5.723699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > > [ 5.972246] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > > [ 6.783904] hpet_acpi_add: no address or irqs in _CRS > > > [ 6.784282] Non-volatile memory driver v1.3 > > > [ 6.785060] telclk_interrup = 0xf non-mcpbl0010 hw. > > > [ 6.785310] Linux agpgart interface v0.103 > > > [ 6.787839] usbcore: registered new interface driver hwa-rc > > > [ 6.788090] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver > > > [ 6.788425] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > > [ 6.788703] ehci_hcd 0000:00:1a.0: EHCI Host Controller > > > [ 6.788959] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > > > [ 6.789475] ehci_hcd 0000:00:1a.0: debug port 2 > > > [ 6.793696] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fc000 > > > [ 6.807535] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > > > [ 6.807838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > > > [ 6.808090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > > [ 6.808545] usb usb1: Product: EHCI Host Controller > > > [ 6.808794] usb usb1: Manufacturer: Linux 3.2.0 ehci_hcd > > > [ 6.809068] usb usb1: SerialNumber: 0000:00:1a.0 > > > [ 6.809575] hub 1-0:1.0: USB hub found > > > [ 6.809829] hub 1-0:1.0: 2 ports detected > > > [ 6.810341] xen_map_pirq_gsi: returning irq 22 for gsi 22 > > > [ 6.810598] Already setup the GSI :22 > > > [ 6.810844] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > > [ 6.811123] ehci_hcd 0000:00:1d.0: EHCI Host Controller > > > [ 6.811384] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > > > [ 6.811918] ehci_hcd 0000:00:1d.0: debug port 2 > > > [ 6.816066] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000 > > > [ 6.831542] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > > > [ 6.831853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > > > [ 6.832103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > > [ 6.832555] usb usb2: Product: EHCI Host Controller > > > [ 6.832825] usb usb2: Manufacturer: Linux 3.2.0 ehci_hcd > > > [ 6.833075] usb usb2: SerialNumber: 0000:00:1d.0 > > > [ 6.833563] hub 2-0:1.0: USB hub found > > > [ 6.833815] hub 2-0:1.0: 2 ports detected > > > [ 6.834353] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver > > > [ 6.834647] uhci_hcd: USB Universal Host Controller Interface driver > > > [ 6.834950] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 > > > [ 6.835373] i8042: PNP: No PS/2 controller found. Probing ports directly. > > > [ 6.836527] i8042: No controller found > > > [ 6.836869] mousedev: PS/2 mouse device common for all mice > > > [ 6.837581] rtc_cmos 00:04: RTC can wake from S4 > > > [ 6.838042] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > > > [ 6.843434] rtc0: alarms up to one day, y3k, 242 bytes nvram > > > [ 6.843793] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) > > > [ 6.844260] wdt: Xen WatchDog Timer Driver v0.01 > > > [ 6.844571] wdt: cannot register miscdev on minor=130 (-16) > > > [ 6.844823] wdt: probe of wdt failed with error -16 > > > [ 6.845072] SoftDog: cannot register miscdev on minor=130 (err=-16) > > > [ 6.845460] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > > > [ 6.846745] TCP cubic registered > > > [ 6.847299] NET: Registered protocol family 10 > > > [ 6.849386] Mobile IPv6 > > > [ 6.849630] NET: Registered protocol family 17 > > > [ 6.850535] sctp: Hash tables configured (established 65536 bind 65536) > > > [ 6.851272] Registering the dns_resolver key type > > > [ 6.851552] Using IPI No-Shortcut mode > > > [ 6.852053] registered taskstats version 1 > > > [ 6.853100] console [netcon0] enabled > > > [ 6.853344] netconsole: network logging started > > > [ 6.853690] rtc_cmos 00:04: setting system clock to 2012-03-13 18:56:06 UTC (1331664966) > > > [ 6.854236] Initializing network drop monitor service > > > [ 6.854866] Freeing unused kernel memory: 436k freed > > > [ 6.856484] Write protecting the kernel text: 3912k > > > [ 6.857532] Write protecting the kernel read-only data: 2456k > > > [ 6.857798] NX-protecting the kernel data: 4280k > > > Loading, please wait... > > > [ 6.901109] udev[133]: starting version 164 > > > [ 6.998543] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) > > > [ 6.999083] xen_map_pirq_gsi: returning irq 16 for gsi 16 > > > [ 6.999361] Already setup the GSI :16 > > > [ 6.999625] bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > [ 7.003132] SCSI subsystem initialized > > > [ 7.008819] bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr 84:2b:2b:52:88:2a > > > [ 7.009413] bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > > > [ 7.009804] Fusion MPT base driver 3.04.20 > > > [ 7.010100] Copyright (c) 1999-2008 LSI Corporation > > > [ 7.013277] Fusion MPT SAS Host driver 3.04.20 > > > [ 7.013638] xen_map_pirq_gsi: returning irq 16 for gsi 16 > > > [ 7.013644] bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr 84:2b:2b:52:88:2b > > > [ 7.014399] Already setup the GSI :16 > > > [ 7.014663] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > [ 7.015118] mptbase: ioc0: Initiating bringup > > > [ 7.119559] usb 1-1: new high-speed USB device number 2 using ehci_hcd > > > [ 7.252020] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > > > [ 7.252296] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > > [ 7.252977] hub 1-1:1.0: USB hub found > > > [ 7.253415] hub 1-1:1.0: 6 ports detected > > > [ 7.363572] usb 2-1: new high-speed USB device number 2 using ehci_hcd > > > [ 7.495891] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > > > [ 7.496186] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > > [ 7.496834] hub 2-1:1.0: USB hub found > > > [ 7.497307] hub 2-1:1.0: 8 ports detected > > > [ 7.571612] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd > > > [ 7.663901] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 > > > [ 7.664200] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > > [ 7.664957] hub 1-1.1:1.0: USB hub found > > > [ 7.665380] hub 1-1.1:1.0: 4 ports detected > > > [ 7.715557] ioc0: LSISAS1068E B3: Capabilities={Initiator} > > > [ 24.278976] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 > > > [ 24.316004] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 > > > [ 24.328504] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HE253GJ 0001 PQ: 0 ANSI: 5 > > > [ 24.343216] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) > > > [ 24.456939] sd 0:0:0:0: [sda] Write Protect is off > > > [ 24.468646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA > > > [ 24.596708] sda: sda1 sda2 < sda5 > > > > [ 24.708503] sd 0:0:0:0: [sda] Attached SCSI disk > > > Begin: Loading essential drivers ... done. > > > Begin: Running /scripts/init-premount ... done. > > > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. > > > Begin: Running /scripts/local-premount ... [ 25.000780] PM: Starting manual resume from disk > > > done. > > > [ 25.027113] kjournald starting. Commit interval 5 seconds > > > [ 25.027187] EXT3-fs (sda1): mounted filesystem with ordered data mode > > > Begin: Running /scripts/local-bottom ... done. > > > done. > > > Begin: Running /scripts/init-bottom ... done. > > > > > INIT: version 2.88 booting > > > > > Using makefile-style concurrent boot in runlevel S. > > > Starting the hotplug events dispatcher: udevd[ 25.989886] udev[352]: starting version 164 > > > . > > > Synthesizing the initial hotplug events...done. > > > Waiting for /dev to be fully populated...[ 26.364902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > > > [ 26.365747] ACPI: Power Button [PWRF] > > > done. > > > Activating swap...[ 26.973701] Adding 6066172k swap on /dev/sda5. Priority:-1 extents:1 across:6066172k > > > done. > > > Checking root file system...fsck from util-linux-ng 2.17.2 > > > /: clean, 429888/14884864 files, 4781808/59517952 blocks (check in 3 mounts) > > > done. > > > [ 27.107722] EXT3-fs (sda1): using internal journal > > > Cleaning up ifupdown.... > > > [ 27.238878] loop: module loaded > > > Loading kernel modules...done. > > > Setting up networking.... > > > Activating lvm and md swap...done. > > > Checking file systems...fsck from util-linux-ng 2.17.2 > > > done. > > > Mounting local filesystems...done. > > > Activating swapfile swap...done. > > > Cleaning up temporary files.... > > > Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 > > > Copyright 2004-2010 Internet Systems Consortium. > > > All rights reserved. > > > For info, please visit https://www.isc.org/software/dhcp/ > > > > > > [ 28.189095] bnx2 0000:02:00.0: eth0: using MSIX > > > [ 28.189494] ADDRCONF(NETDEV_UP): eth0: link is not ready > > > Listening on LPF/eth0/84:2b:2b:52:88:2a > > > Sending on LPF/eth0/84:2b:2b:52:88:2a > > > Sending on Socket/fallback > > > Setting kernel variables ...done. > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 > > > [ 31.403226] bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex > > > [ 31.403909] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 > > > DHCPOFFER from 10.80.224.1 > > > DHCPREQUEST on eth0 to 255.255.255.255 port 67 > > > DHCPACK from 10.80.224.1 > > > bound to 10.80.227.196 -- renewal in 20979 seconds. > > > done. > > > Starting portmap daemon.... > > > Starting NFS common utilities: statd. > > > Cleaning up temporary files.... > > > Setting console screen modes and fonts. > > > cannot (un)set powersave mode > > > [9;30][14;30]Loading the saved-state of the serial devices... > > > [ 74.067406] ttyS0: LSR safety check engaged! > > > [ 74.069153] ttyS0: LSR safety check engaged! > > > /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A > > > /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A > > > > > INIT: Entering runlevel: 2 > > > > > Using makefile-style concurrent boot in runlevel 2. > > > Starting portmap daemon...Already running.. > > > Starting NFS common utilities: statd. > > > Starting enhanced syslogd: rsyslogd. > > > Enabling additional executable binary formats: binfmt-support. > > > [ 74.660094] BUG: unable to handle kernel paging request at 000012b7 > > > [ 74.660475] IP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 > > > [ 74.660763] *pdpt = 0000000004d92001 *pde = 0000000000000000 > > > [ 74.661083] Oops: 0000 [#1] SMP > > > [ 74.661398] Modules linked in: binfmt_misc loop button processor thermal_sys hwmon sd_mod mptsas mptscsih mptbase scsi_transport_sas scsi_mod bnx2 [last unloaded: scsi_wait_scan] > > > [ 74.662605] > > > [ 74.662844] Pid: 0, comm: swapper/0 Tainted: G W 3.2.0 #1 Dell Inc. PowerEdge R310/05XKKK > > > [ 74.663430] EIP: 0061:[<c1268fea>] EFLAGS: 00010202 CPU: 0 > > > [ 74.663681] EIP is at is_xen_swiotlb_buffer+0x35/0x80 > > > [ 74.663932] EAX: 0000006d EBX: ffffffff ECX: c1777000 EDX: ffffffff > > > [ 74.664186] ESI: 00000000 EDI: 00000002 EBP: 00000000 ESP: e3c0fec4 > > > [ 74.664463] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 > > > [ 74.664709] Process swapper/0 (pid: 0, ti=e3c0e000 task=c163f060 task.ti=c1638000) > > > [ 74.665162] Stack: > > > [ 74.665405] 00000000 00000000 c1269074 ffffffff e3e2a860 00000092 c5760480 efa3a3e0 > > > [ 74.666155] c1269137 c5b2dec0 c1269146 00000092 00000002 00000000 ed62c57c 00000092 > > > [ 74.666882] 00000002 007d0000 e867d120 0000007c e3c02300 e3c0ff80 c10d5d1c 8080017c > > > [ 74.667639] Call Trace: > > > [ 74.667885] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > > > [ 74.668141] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > > > [ 74.668397] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > > > [ 74.668687] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > > > [ 74.668938] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > > > [ 74.669189] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > > > [ 74.669442] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > > > [ 74.669697] [<c1047202>] ? irq_enter+0x49/0x49 > > > [ 74.669978] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > > > [ 74.670230] [<c1047202>] ? irq_enter+0x49/0x49 > > > [ 74.670480] [<c10472aa>] ? __do_softirq+0xa8/0x168 > > > [ 74.670732] [<c1047202>] ? irq_enter+0x49/0x49 > > > [ 74.670982] <IRQ> > > > [ 74.671291] [<c10470d8>] ? irq_exit+0x2f/0x91 > > > [ 74.671545] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > > > [ 74.671799] [<c13d0647>] ? xen_do_upcall+0x7/0xc > > > [ 74.672051] [<c106007b>] ? update_wall_time+0x20c/0x3ef > > > [ 74.672301] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > > > [ 74.672555] [<c1006772>] ? xen_safe_halt+0xf/0x1b > > > [ 74.672834] [<c10136da>] ? default_idle+0x65/0xb8 > > > [ 74.673089] [<c100c220>] ? cpu_idle+0x61/0x7d > > > [ 74.673347] [<c16767f5>] ? start_kernel+0x34a/0x34d > > > [ 74.673600] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > > [ 74.673850] Code: ff ff ff 89 c3 e8 cd e3 d9 ff 39 f0 b8 ff ff ff ff 0f 45 d8 89 d8 c1 e8 0e 0f be 80 e0 24 67 c1 85 c0 78 4d 8b 14 85 c0 24 67 c1 <8b> 82 b8 12 00 00 03 82 b0 12 00 00 39 c3 73 36 a1 e8 88 76 c1 > > > [ 74.676839] EIP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 SS:ESP 0069:e3c0fec4 > > > [ 74.677360] CR2: 00000000000012b7 > > > [ 74.677608] ---[ end trace 4eaa2a86a8e2da48 ]--- > > > [ 74.677856] Kernel panic - not syncing: Fatal exception in interrupt > > > [ 74.678108] Pid: 0, comm: swapper/0 Tainted: G D W 3.2.0 #1 > > > [ 74.678391] Call Trace: > > > [ 74.678639] [<c13cd2f6>] ? panic+0x4d/0x157 > > > [ 74.678889] [<c100eeec>] ? oops_end+0xad/0xb8 > > > [ 74.679140] [<c102a7c8>] ? bad_area_nosemaphore+0xa/0xc > > > [ 74.679393] [<c102abd5>] ? do_page_fault+0x167/0x31a > > > [ 74.679676] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > > > [ 74.679931] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > > > [ 74.680185] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > > [ 74.680440] [<c100ba73>] ? __xen_spin_lock+0xb4/0xc8 > > > [ 74.680693] [<c100673c>] ? xen_force_evtchn_callback+0xc/0x10 > > > [ 74.680977] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > > > [ 74.681229] [<c13cfde6>] ? error_code+0x5a/0x60 > > > [ 74.681481] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > > > [ 74.681729] [<c1268fea>] ? is_xen_swiotlb_buffer+0x35/0x80 > > > [ 74.681979] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > > > [ 74.682232] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > > > [ 74.682519] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > > > [ 74.682775] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > > > [ 74.683027] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > > > [ 74.683278] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > > > [ 74.683536] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > > > [ 74.683816] [<c1047202>] ? irq_enter+0x49/0x49 > > > [ 74.684067] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > > > [ 74.684317] [<c1047202>] ? irq_enter+0x49/0x49 > > > [ 74.684569] [<c10472aa>] ? __do_softirq+0xa8/0x168 > > > [ 74.684820] [<c1047202>] ? irq_enter+0x49/0x49 > > > [ 74.685066] <IRQ> [<c10470d8>] ? irq_exit+0x2f/0x91 > > > [ 74.685384] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > > > [ 74.685638] [<c13d0647>] ? xen_do_upcall+0x7/0xc > > > [ 74.685888] [<c106007b>] ? update_wall_time+0x20c/0x3ef > > > [ 74.691270] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > > > [ 74.691522] [<c1006772>] ? xen_safe_halt+0xf/0x1b > > > [ 74.691770] [<c10136da>] ? default_idle+0x65/0xb8 > > > [ 74.692053] [<c100c220>] ? cpu_idle+0x61/0x7d > > > [ 74.692304] [<c16767f5>] ? start_kernel+0x34a/0x34d > > > [ 74.692557] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > > > [disconnect] > > > goncalog@eire:~$ xenuse -t dt29[Kexit > > > > > > Script done on Tue 13 Mar 2012 19:06:30 GMT > >> # > # Automatically generated file; DO NOT EDIT. > # Linux/i386 3.2.9 Kernel Configuration > # > # CONFIG_64BIT is not set > CONFIG_X86_32=y > # CONFIG_X86_64 is not set > CONFIG_X86=y > CONFIG_INSTRUCTION_DECODER=y > CONFIG_OUTPUT_FORMAT="elf32-i386" > CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" > CONFIG_GENERIC_CMOS_UPDATE=y > CONFIG_CLOCKSOURCE_WATCHDOG=y > CONFIG_GENERIC_CLOCKEVENTS=y > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y > CONFIG_LOCKDEP_SUPPORT=y > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_HAVE_LATENCYTOP_SUPPORT=y > CONFIG_MMU=y > CONFIG_ZONE_DMA=y > # CONFIG_NEED_DMA_MAP_STATE is not set > CONFIG_NEED_SG_DMA_LENGTH=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_GENERIC_BUG=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_GPIO=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > # CONFIG_GENERIC_TIME_VSYSCALL is not set > CONFIG_ARCH_HAS_CPU_RELAX=y > CONFIG_ARCH_HAS_DEFAULT_IDLE=y > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y > CONFIG_HAVE_SETUP_PER_CPU_AREA=y > CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y > CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y > CONFIG_ARCH_HIBERNATION_POSSIBLE=y > CONFIG_ARCH_SUSPEND_POSSIBLE=y > # CONFIG_ZONE_DMA32 is not set > CONFIG_ARCH_POPULATES_NODE_MAP=y > # CONFIG_AUDIT_ARCH is not set > CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y > CONFIG_X86_32_SMP=y > CONFIG_X86_HT=y > CONFIG_X86_32_LAZY_GS=y > CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" > CONFIG_KTIME_SCALAR=y > CONFIG_ARCH_CPU_PROBE_RELEASE=y > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > CONFIG_HAVE_IRQ_WORK=y > CONFIG_IRQ_WORK=y > > # > # General setup > # > CONFIG_EXPERIMENTAL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > CONFIG_CROSS_COMPILE="" > CONFIG_LOCALVERSION="" > # CONFIG_LOCALVERSION_AUTO is not set > CONFIG_HAVE_KERNEL_GZIP=y > CONFIG_HAVE_KERNEL_BZIP2=y > CONFIG_HAVE_KERNEL_LZMA=y > CONFIG_HAVE_KERNEL_XZ=y > CONFIG_HAVE_KERNEL_LZO=y > CONFIG_KERNEL_GZIP=y > # CONFIG_KERNEL_BZIP2 is not set > # CONFIG_KERNEL_LZMA is not set > # CONFIG_KERNEL_XZ is not set > # CONFIG_KERNEL_LZO is not set > CONFIG_DEFAULT_HOSTNAME="dt29" > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > CONFIG_POSIX_MQUEUE=y > CONFIG_POSIX_MQUEUE_SYSCTL=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_BSD_PROCESS_ACCT_V3=y > # CONFIG_FHANDLE is not set > CONFIG_TASKSTATS=y > CONFIG_TASK_DELAY_ACCT=y > CONFIG_TASK_XACCT=y > CONFIG_TASK_IO_ACCOUNTING=y > CONFIG_AUDIT=y > CONFIG_AUDITSYSCALL=y > CONFIG_AUDIT_WATCH=y > CONFIG_AUDIT_TREE=y > CONFIG_HAVE_GENERIC_HARDIRQS=y > > # > # IRQ subsystem > # > CONFIG_GENERIC_HARDIRQS=y > CONFIG_HAVE_SPARSE_IRQ=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_GENERIC_IRQ_SHOW=y > CONFIG_GENERIC_PENDING_IRQ=y > CONFIG_IRQ_FORCED_THREADING=y > CONFIG_SPARSE_IRQ=y > > # > # RCU Subsystem > # > CONFIG_TREE_RCU=y > # CONFIG_PREEMPT_RCU is not set > # CONFIG_RCU_TRACE is not set > CONFIG_RCU_FANOUT=32 > # CONFIG_RCU_FANOUT_EXACT is not set > # CONFIG_RCU_FAST_NO_HZ is not set > # CONFIG_TREE_RCU_TRACE is not set > # CONFIG_IKCONFIG is not set > CONFIG_LOG_BUF_SHIFT=17 > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y > CONFIG_CGROUPS=y > # CONFIG_CGROUP_DEBUG is not set > CONFIG_CGROUP_FREEZER=y > CONFIG_CGROUP_DEVICE=y > CONFIG_CPUSETS=y > CONFIG_PROC_PID_CPUSET=y > CONFIG_CGROUP_CPUACCT=y > # CONFIG_RESOURCE_COUNTERS is not set > # CONFIG_CGROUP_PERF is not set > CONFIG_CGROUP_SCHED=y > CONFIG_FAIR_GROUP_SCHED=y > # CONFIG_CFS_BANDWIDTH is not set > # CONFIG_RT_GROUP_SCHED is not set > # CONFIG_BLK_CGROUP is not set > CONFIG_NAMESPACES=y > CONFIG_UTS_NS=y > CONFIG_IPC_NS=y > CONFIG_USER_NS=y > CONFIG_PID_NS=y > CONFIG_NET_NS=y > # CONFIG_SCHED_AUTOGROUP is not set > CONFIG_SYSFS_DEPRECATED=y > # CONFIG_SYSFS_DEPRECATED_V2 is not set > CONFIG_RELAY=y > CONFIG_BLK_DEV_INITRD=y > CONFIG_INITRAMFS_SOURCE="" > CONFIG_RD_GZIP=y > CONFIG_RD_BZIP2=y > CONFIG_RD_LZMA=y > CONFIG_RD_XZ=y > CONFIG_RD_LZO=y > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > CONFIG_SYSCTL=y > CONFIG_ANON_INODES=y > # CONFIG_EXPERT is not set > CONFIG_UID16=y > # CONFIG_SYSCTL_SYSCALL is not set > CONFIG_KALLSYMS=y > CONFIG_KALLSYMS_ALL=y > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_PCSPKR_PLATFORM=y > CONFIG_HAVE_PCSPKR_PLATFORM=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SIGNALFD=y > CONFIG_TIMERFD=y > CONFIG_EVENTFD=y > CONFIG_SHMEM=y > CONFIG_AIO=y > # CONFIG_EMBEDDED is not set > CONFIG_HAVE_PERF_EVENTS=y > > # > # Kernel Performance Events And Counters > # > CONFIG_PERF_EVENTS=y > # CONFIG_PERF_COUNTERS is not set > # CONFIG_DEBUG_PERF_USE_VMALLOC is not set > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_PCI_QUIRKS=y > CONFIG_SLUB_DEBUG=y > CONFIG_COMPAT_BRK=y > # CONFIG_SLAB is not set > CONFIG_SLUB=y > # CONFIG_PROFILING is not set > CONFIG_TRACEPOINTS=y > CONFIG_HAVE_OPROFILE=y > # CONFIG_KPROBES is not set > # CONFIG_JUMP_LABEL is not set > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y > CONFIG_HAVE_IOREMAP_PROT=y > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_HAVE_OPTPROBES=y > CONFIG_HAVE_ARCH_TRACEHOOK=y > CONFIG_HAVE_DMA_ATTRS=y > CONFIG_USE_GENERIC_SMP_HELPERS=y > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y > CONFIG_HAVE_DMA_API_DEBUG=y > CONFIG_HAVE_HW_BREAKPOINT=y > CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y > CONFIG_HAVE_USER_RETURN_NOTIFIER=y > CONFIG_HAVE_PERF_EVENTS_NMI=y > CONFIG_HAVE_ARCH_JUMP_LABEL=y > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y > > # > # GCOV-based kernel profiling > # > # CONFIG_GCOV_KERNEL is not set > CONFIG_HAVE_GENERIC_DMA_COHERENT=y > CONFIG_SLABINFO=y > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > CONFIG_MODULE_FORCE_LOAD=y > CONFIG_MODULE_UNLOAD=y > CONFIG_MODULE_FORCE_UNLOAD=y > CONFIG_MODVERSIONS=y > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_STOP_MACHINE=y > CONFIG_BLOCK=y > CONFIG_LBDAF=y > CONFIG_BLK_DEV_BSG=y > CONFIG_BLK_DEV_BSGLIB=y > CONFIG_BLK_DEV_INTEGRITY=y > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_DEFAULT_DEADLINE is not set > CONFIG_DEFAULT_CFQ=y > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="cfq" > # CONFIG_INLINE_SPIN_TRYLOCK is not set > # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set > # CONFIG_INLINE_SPIN_LOCK is not set > # CONFIG_INLINE_SPIN_LOCK_BH is not set > # CONFIG_INLINE_SPIN_LOCK_IRQ is not set > # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set > CONFIG_INLINE_SPIN_UNLOCK=y > # CONFIG_INLINE_SPIN_UNLOCK_BH is not set > CONFIG_INLINE_SPIN_UNLOCK_IRQ=y > # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set > # CONFIG_INLINE_READ_TRYLOCK is not set > # CONFIG_INLINE_READ_LOCK is not set > # CONFIG_INLINE_READ_LOCK_BH is not set > # CONFIG_INLINE_READ_LOCK_IRQ is not set > # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set > CONFIG_INLINE_READ_UNLOCK=y > # CONFIG_INLINE_READ_UNLOCK_BH is not set > CONFIG_INLINE_READ_UNLOCK_IRQ=y > # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set > # CONFIG_INLINE_WRITE_TRYLOCK is not set > # CONFIG_INLINE_WRITE_LOCK is not set > # CONFIG_INLINE_WRITE_LOCK_BH is not set > # CONFIG_INLINE_WRITE_LOCK_IRQ is not set > # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set > CONFIG_INLINE_WRITE_UNLOCK=y > # CONFIG_INLINE_WRITE_UNLOCK_BH is not set > CONFIG_INLINE_WRITE_UNLOCK_IRQ=y > # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set > # CONFIG_MUTEX_SPIN_ON_OWNER is not set > CONFIG_FREEZER=y > > # > # Processor type and features > # > CONFIG_TICK_ONESHOT=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y > CONFIG_SMP=y > CONFIG_X86_MPPARSE=y > CONFIG_X86_BIGSMP=y > # CONFIG_X86_EXTENDED_PLATFORM is not set > CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y > # CONFIG_X86_32_IRIS is not set > CONFIG_SCHED_OMIT_FRAME_POINTER=y > CONFIG_PARAVIRT_GUEST=y > # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set > CONFIG_XEN=y > CONFIG_XEN_DOM0=y > CONFIG_XEN_PRIVILEGED_GUEST=y > CONFIG_XEN_PVHVM=y > CONFIG_XEN_MAX_DOMAIN_MEMORY=128 > CONFIG_XEN_SAVE_RESTORE=y > CONFIG_XEN_DEBUG_FS=y > # CONFIG_KVM_CLOCK is not set > # CONFIG_KVM_GUEST is not set > # CONFIG_LGUEST_GUEST is not set > CONFIG_PARAVIRT=y > CONFIG_PARAVIRT_SPINLOCKS=y > CONFIG_PARAVIRT_CLOCK=y > CONFIG_PARAVIRT_DEBUG=y > CONFIG_NO_BOOTMEM=y > # CONFIG_MEMTEST is not set > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMII is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUMM is not set > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MK8 is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MEFFICEON is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MELAN is not set > # CONFIG_MGEODEGX1 is not set > # CONFIG_MGEODE_LX is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > # CONFIG_MVIAC7 is not set > CONFIG_MCORE2=y > # CONFIG_MATOM is not set > CONFIG_X86_GENERIC=y > CONFIG_X86_INTERNODE_CACHE_SHIFT=7 > CONFIG_X86_CMPXCHG=y > CONFIG_CMPXCHG_LOCAL=y > CONFIG_CMPXCHG_DOUBLE=y > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_X86_XADD=y > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > CONFIG_X86_INTEL_USERCOPY=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_X86_TSC=y > CONFIG_X86_CMPXCHG64=y > CONFIG_X86_CMOV=y > CONFIG_X86_MINIMUM_CPU_FAMILY=5 > CONFIG_X86_DEBUGCTLMSR=y > CONFIG_CPU_SUP_INTEL=y > CONFIG_CPU_SUP_CYRIX_32=y > CONFIG_CPU_SUP_AMD=y > CONFIG_CPU_SUP_CENTAUR=y > CONFIG_CPU_SUP_TRANSMETA_32=y > CONFIG_CPU_SUP_UMC_32=y > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_DMI=y > CONFIG_SWIOTLB=y > CONFIG_IOMMU_HELPER=y > CONFIG_NR_CPUS=32 > CONFIG_SCHED_SMT=y > CONFIG_SCHED_MC=y > # CONFIG_IRQ_TIME_ACCOUNTING is not set > # CONFIG_PREEMPT_NONE is not set > CONFIG_PREEMPT_VOLUNTARY=y > # CONFIG_PREEMPT is not set > CONFIG_X86_LOCAL_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y > CONFIG_X86_MCE=y > CONFIG_X86_MCE_INTEL=y > CONFIG_X86_MCE_AMD=y > # CONFIG_X86_ANCIENT_MCE is not set > CONFIG_X86_MCE_THRESHOLD=y > CONFIG_X86_MCE_INJECT=m > CONFIG_X86_THERMAL_VECTOR=y > CONFIG_VM86=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > CONFIG_X86_REBOOTFIXUPS=y > CONFIG_MICROCODE=m > CONFIG_MICROCODE_INTEL=y > CONFIG_MICROCODE_AMD=y > CONFIG_MICROCODE_OLD_INTERFACE=y > CONFIG_X86_MSR=m > CONFIG_X86_CPUID=m > # CONFIG_NOHIGHMEM is not set > # CONFIG_HIGHMEM4G is not set > CONFIG_HIGHMEM64G=y > CONFIG_PAGE_OFFSET=0xC0000000 > CONFIG_HIGHMEM=y > CONFIG_X86_PAE=y > CONFIG_ARCH_PHYS_ADDR_T_64BIT=y > CONFIG_ARCH_DMA_ADDR_T_64BIT=y > CONFIG_NUMA=y > # CONFIG_NUMA_EMU is not set > CONFIG_NODES_SHIFT=3 > CONFIG_HAVE_ARCH_BOOTMEM=y > CONFIG_HAVE_ARCH_ALLOC_REMAP=y > CONFIG_ARCH_HAVE_MEMORY_PRESENT=y > CONFIG_NEED_NODE_MEMMAP_SIZE=y > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y > CONFIG_ARCH_SPARSEMEM_ENABLE=y > CONFIG_ARCH_SELECT_MEMORY_MODEL=y > CONFIG_ILLEGAL_POINTER_VALUE=0 > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_DISCONTIGMEM_MANUAL=y > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_DISCONTIGMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > CONFIG_NEED_MULTIPLE_NODES=y > CONFIG_HAVE_MEMORY_PRESENT=y > CONFIG_SPARSEMEM_STATIC=y > CONFIG_HAVE_MEMBLOCK=y > CONFIG_PAGEFLAGS_EXTENDED=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > # CONFIG_COMPACTION is not set > CONFIG_MIGRATION=y > CONFIG_PHYS_ADDR_T_64BIT=y > CONFIG_ZONE_DMA_FLAG=1 > CONFIG_BOUNCE=y > CONFIG_VIRT_TO_BUS=y > CONFIG_MMU_NOTIFIER=y > CONFIG_KSM=y > CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y > CONFIG_MEMORY_FAILURE=y > CONFIG_HWPOISON_INJECT=m > # CONFIG_TRANSPARENT_HUGEPAGE is not set > # CONFIG_CLEANCACHE is not set > # CONFIG_HIGHPTE is not set > # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set > CONFIG_X86_RESERVE_LOW=64 > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > CONFIG_MTRR_SANITIZER=y > CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 > CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 > CONFIG_X86_PAT=y > CONFIG_ARCH_USES_PG_UNCACHED=y > CONFIG_ARCH_RANDOM=y > # CONFIG_EFI is not set > # CONFIG_SECCOMP is not set > # CONFIG_CC_STACKPROTECTOR is not set > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_300 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_SCHED_HRTICK=y > CONFIG_KEXEC=y > # CONFIG_CRASH_DUMP is not set > CONFIG_KEXEC_JUMP=y > CONFIG_PHYSICAL_START=0x1000000 > CONFIG_RELOCATABLE=y > CONFIG_X86_NEED_RELOCS=y > CONFIG_PHYSICAL_ALIGN=0x1000000 > CONFIG_HOTPLUG_CPU=y > # CONFIG_COMPAT_VDSO is not set > # CONFIG_CMDLINE_BOOL is not set > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > CONFIG_USE_PERCPU_NUMA_NODE_ID=y > > # > # Power management and ACPI options > # > CONFIG_SUSPEND=y > CONFIG_SUSPEND_FREEZER=y > CONFIG_HIBERNATE_CALLBACKS=y > CONFIG_HIBERNATION=y > CONFIG_PM_STD_PARTITION="" > CONFIG_PM_SLEEP=y > CONFIG_PM_SLEEP_SMP=y > CONFIG_PM_RUNTIME=y > CONFIG_PM=y > CONFIG_PM_DEBUG=y > # CONFIG_PM_ADVANCED_DEBUG is not set > # CONFIG_PM_TEST_SUSPEND is not set > CONFIG_CAN_PM_TRACE=y > # CONFIG_PM_TRACE_RTC is not set > CONFIG_ACPI=y > CONFIG_ACPI_SLEEP=y > CONFIG_ACPI_PROCFS=y > # CONFIG_ACPI_PROCFS_POWER is not set > # CONFIG_ACPI_EC_DEBUGFS is not set > # CONFIG_ACPI_PROC_EVENT is not set > CONFIG_ACPI_AC=m > CONFIG_ACPI_BATTERY=m > CONFIG_ACPI_BUTTON=m > CONFIG_ACPI_FAN=m > CONFIG_ACPI_DOCK=y > CONFIG_ACPI_PROCESSOR=m > # CONFIG_ACPI_IPMI is not set > CONFIG_ACPI_HOTPLUG_CPU=y > CONFIG_ACPI_PROCESSOR_AGGREGATOR=m > CONFIG_ACPI_THERMAL=m > # CONFIG_ACPI_NUMA is not set > # CONFIG_ACPI_CUSTOM_DSDT is not set > CONFIG_ACPI_BLACKLIST_YEAR=0 > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_PCI_SLOT=m > CONFIG_X86_PM_TIMER=y > CONFIG_ACPI_CONTAINER=m > CONFIG_ACPI_SBS=m > # CONFIG_ACPI_HED is not set > # CONFIG_ACPI_CUSTOM_METHOD is not set > # CONFIG_ACPI_APEI is not set > # CONFIG_SFI is not set > CONFIG_X86_APM_BOOT=y > CONFIG_APM=m > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > CONFIG_APM_DO_ENABLE=y > CONFIG_APM_CPU_IDLE=y > # CONFIG_APM_DISPLAY_BLANK is not set > # CONFIG_APM_ALLOW_INTS is not set > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_TABLE=y > CONFIG_CPU_FREQ_STAT=m > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m > > # > # x86 CPU frequency scaling drivers > # > # CONFIG_X86_PCC_CPUFREQ is not set > CONFIG_X86_ACPI_CPUFREQ=m > CONFIG_X86_POWERNOW_K6=m > CONFIG_X86_POWERNOW_K7=m > CONFIG_X86_POWERNOW_K7_ACPI=y > CONFIG_X86_POWERNOW_K8=m > CONFIG_X86_GX_SUSPMOD=m > CONFIG_X86_SPEEDSTEP_CENTRINO=m > CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y > CONFIG_X86_SPEEDSTEP_ICH=y > CONFIG_X86_SPEEDSTEP_SMI=m > CONFIG_X86_P4_CLOCKMOD=m > CONFIG_X86_CPUFREQ_NFORCE2=m > CONFIG_X86_LONGRUN=m > CONFIG_X86_LONGHAUL=m > # CONFIG_X86_E_POWERSAVER is not set > > # > # shared options > # > CONFIG_X86_SPEEDSTEP_LIB=y > CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y > CONFIG_CPU_IDLE=y > CONFIG_CPU_IDLE_GOV_LADDER=y > CONFIG_CPU_IDLE_GOV_MENU=y > # CONFIG_INTEL_IDLE is not set > > # > # Bus options (PCI etc.) > # > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GOMMCONFIG is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > CONFIG_PCI_XEN=y > CONFIG_PCI_DOMAINS=y > # CONFIG_PCI_CNB20LE_QUIRK is not set > CONFIG_PCIEPORTBUS=y > CONFIG_HOTPLUG_PCI_PCIE=m > CONFIG_PCIEAER=y > # CONFIG_PCIE_ECRC is not set > CONFIG_PCIEAER_INJECT=m > CONFIG_PCIEASPM=y > # CONFIG_PCIEASPM_DEBUG is not set > CONFIG_PCIE_PME=y > CONFIG_ARCH_SUPPORTS_MSI=y > CONFIG_PCI_MSI=y > # CONFIG_PCI_DEBUG is not set > CONFIG_PCI_STUB=m > CONFIG_XEN_PCIDEV_FRONTEND=m > CONFIG_HT_IRQ=y > CONFIG_PCI_ATS=y > CONFIG_PCI_IOV=y > # CONFIG_PCI_PRI is not set > # CONFIG_PCI_PASID is not set > CONFIG_PCI_IOAPIC=y > CONFIG_PCI_LABEL=y > CONFIG_ISA_DMA_API=y > CONFIG_ISA=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > CONFIG_SCx200=m > CONFIG_SCx200HR_TIMER=m > # CONFIG_ALIX is not set > CONFIG_AMD_NB=y > # CONFIG_PCCARD is not set > CONFIG_HOTPLUG_PCI=m > # CONFIG_HOTPLUG_PCI_FAKE is not set > # CONFIG_HOTPLUG_PCI_COMPAQ is not set > # CONFIG_HOTPLUG_PCI_IBM is not set > CONFIG_HOTPLUG_PCI_ACPI=m > # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set > CONFIG_HOTPLUG_PCI_CPCI=y > # CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set > CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m > # CONFIG_HOTPLUG_PCI_SHPC is not set > # CONFIG_RAPIDIO is not set > > # > # Executable file formats / Emulations > # > CONFIG_BINFMT_ELF=y > CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y > CONFIG_HAVE_AOUT=y > CONFIG_BINFMT_AOUT=m > CONFIG_BINFMT_MISC=m > CONFIG_HAVE_ATOMIC_IOMAP=y > CONFIG_HAVE_TEXT_POKE_SMP=y > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > CONFIG_UNIX=y > CONFIG_XFRM=y > CONFIG_XFRM_USER=m > CONFIG_XFRM_SUB_POLICY=y > CONFIG_XFRM_MIGRATE=y > # CONFIG_XFRM_STATISTICS is not set > CONFIG_XFRM_IPCOMP=m > CONFIG_NET_KEY=m > CONFIG_NET_KEY_MIGRATE=y > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > CONFIG_IP_ADVANCED_ROUTER=y > # CONFIG_IP_FIB_TRIE_STATS is not set > CONFIG_IP_MULTIPLE_TABLES=y > CONFIG_IP_ROUTE_MULTIPATH=y > CONFIG_IP_ROUTE_VERBOSE=y > # CONFIG_IP_PNP is not set > CONFIG_NET_IPIP=m > # CONFIG_NET_IPGRE_DEMUX is not set > CONFIG_IP_MROUTE=y > # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set > CONFIG_IP_PIMSM_V1=y > CONFIG_IP_PIMSM_V2=y > # CONFIG_ARPD is not set > CONFIG_SYN_COOKIES=y > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_XFRM_TUNNEL is not set > CONFIG_INET_TUNNEL=m > # CONFIG_INET_XFRM_MODE_TRANSPORT is not set > # CONFIG_INET_XFRM_MODE_TUNNEL is not set > # CONFIG_INET_XFRM_MODE_BEET is not set > CONFIG_INET_LRO=m > CONFIG_INET_DIAG=m > CONFIG_INET_TCP_DIAG=m > CONFIG_TCP_CONG_ADVANCED=y > CONFIG_TCP_CONG_BIC=m > CONFIG_TCP_CONG_CUBIC=y > CONFIG_TCP_CONG_WESTWOOD=m > CONFIG_TCP_CONG_HTCP=m > CONFIG_TCP_CONG_HSTCP=m > CONFIG_TCP_CONG_HYBLA=m > CONFIG_TCP_CONG_VEGAS=m > CONFIG_TCP_CONG_SCALABLE=m > CONFIG_TCP_CONG_LP=m > CONFIG_TCP_CONG_VENO=m > CONFIG_TCP_CONG_YEAH=m > CONFIG_TCP_CONG_ILLINOIS=m > CONFIG_DEFAULT_CUBIC=y > # CONFIG_DEFAULT_RENO is not set > CONFIG_DEFAULT_TCP_CONG="cubic" > CONFIG_TCP_MD5SIG=y > CONFIG_IPV6=y > CONFIG_IPV6_PRIVACY=y > CONFIG_IPV6_ROUTER_PREF=y > CONFIG_IPV6_ROUTE_INFO=y > CONFIG_IPV6_OPTIMISTIC_DAD=y > CONFIG_INET6_AH=m > CONFIG_INET6_ESP=m > CONFIG_INET6_IPCOMP=m > CONFIG_IPV6_MIP6=y > CONFIG_INET6_XFRM_TUNNEL=m > CONFIG_INET6_TUNNEL=m > CONFIG_INET6_XFRM_MODE_TRANSPORT=m > CONFIG_INET6_XFRM_MODE_TUNNEL=m > CONFIG_INET6_XFRM_MODE_BEET=m > CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m > CONFIG_IPV6_SIT=m > # CONFIG_IPV6_SIT_6RD is not set > CONFIG_IPV6_NDISC_NODETYPE=y > CONFIG_IPV6_TUNNEL=m > CONFIG_IPV6_MULTIPLE_TABLES=y > CONFIG_IPV6_SUBTREES=y > CONFIG_IPV6_MROUTE=y > # CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set > CONFIG_IPV6_PIMSM_V2=y > CONFIG_NETWORK_SECMARK=y > # CONFIG_NETWORK_PHY_TIMESTAMPING is not set > # CONFIG_NETFILTER is not set > # CONFIG_IP_DCCP is not set > CONFIG_IP_SCTP=y > # CONFIG_SCTP_DBG_MSG is not set > # CONFIG_SCTP_DBG_OBJCNT is not set > CONFIG_SCTP_HMAC_NONE=y > # CONFIG_SCTP_HMAC_SHA1 is not set > # CONFIG_SCTP_HMAC_MD5 is not set > # CONFIG_RDS is not set > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_L2TP is not set > CONFIG_STP=m > CONFIG_GARP=m > CONFIG_BRIDGE=m > CONFIG_BRIDGE_IGMP_SNOOPING=y > # CONFIG_NET_DSA is not set > CONFIG_VLAN_8021Q=m > CONFIG_VLAN_8021Q_GVRP=y > # CONFIG_DECNET is not set > CONFIG_LLC=m > CONFIG_LLC2=m > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_PHONET is not set > # CONFIG_IEEE802154 is not set > # CONFIG_NET_SCHED is not set > CONFIG_DCB=y > CONFIG_DNS_RESOLVER=y > # CONFIG_BATMAN_ADV is not set > CONFIG_RPS=y > CONFIG_RFS_ACCEL=y > CONFIG_XPS=y > > # > # Network testing > # > CONFIG_NET_PKTGEN=m > CONFIG_NET_DROP_MONITOR=y > # CONFIG_HAMRADIO is not set > # CONFIG_CAN is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > CONFIG_AF_RXRPC=m > # CONFIG_AF_RXRPC_DEBUG is not set > CONFIG_RXKAD=m > CONFIG_FIB_RULES=y > # CONFIG_WIRELESS is not set > # CONFIG_WIMAX is not set > # CONFIG_RFKILL is not set > # CONFIG_NET_9P is not set > # CONFIG_CAIF is not set > # CONFIG_CEPH_LIB is not set > # CONFIG_NFC is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_UEVENT_HELPER_PATH="" > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=y > # CONFIG_FIRMWARE_IN_KERNEL is not set > CONFIG_EXTRA_FIRMWARE="" > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > CONFIG_SYS_HYPERVISOR=y > CONFIG_CONNECTOR=m > CONFIG_MTD=y > # CONFIG_MTD_TESTS is not set > CONFIG_MTD_REDBOOT_PARTS=m > CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 > # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set > # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set > # CONFIG_MTD_CMDLINE_PARTS is not set > # CONFIG_MTD_AR7_PARTS is not set > > # > # User Modules And Translation Layers > # > # CONFIG_MTD_CHAR is not set > CONFIG_MTD_BLKDEVS=m > # CONFIG_MTD_BLOCK is not set > # CONFIG_MTD_BLOCK_RO is not set > CONFIG_FTL=m > CONFIG_NFTL=m > CONFIG_NFTL_RW=y > CONFIG_INFTL=m > CONFIG_RFD_FTL=m > CONFIG_SSFDC=m > # CONFIG_SM_FTL is not set > # CONFIG_MTD_OOPS is not set > # CONFIG_MTD_SWAP is not set > > # > # RAM/ROM/Flash chip drivers > # > # CONFIG_MTD_CFI is not set > CONFIG_MTD_JEDECPROBE=y > CONFIG_MTD_GEN_PROBE=y > # CONFIG_MTD_CFI_ADV_OPTIONS is not set > CONFIG_MTD_MAP_BANK_WIDTH_1=y > CONFIG_MTD_MAP_BANK_WIDTH_2=y > CONFIG_MTD_MAP_BANK_WIDTH_4=y > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set > CONFIG_MTD_CFI_I1=y > CONFIG_MTD_CFI_I2=y > # CONFIG_MTD_CFI_I4 is not set > # CONFIG_MTD_CFI_I8 is not set > CONFIG_MTD_CFI_INTELEXT=m > CONFIG_MTD_CFI_AMDSTD=m > # CONFIG_MTD_CFI_STAA is not set > CONFIG_MTD_CFI_UTIL=m > # CONFIG_MTD_RAM is not set > # CONFIG_MTD_ROM is not set > # CONFIG_MTD_ABSENT is not set > > # > # Mapping drivers for chip access > # > # CONFIG_MTD_COMPLEX_MAPPINGS is not set > # CONFIG_MTD_PHYSMAP is not set > # CONFIG_MTD_TS5500 is not set > # CONFIG_MTD_AMD76XROM is not set > # CONFIG_MTD_ICHXROM is not set > # CONFIG_MTD_ESB2ROM is not set > # CONFIG_MTD_CK804XROM is not set > # CONFIG_MTD_SCB2_FLASH is not set > # CONFIG_MTD_NETtel is not set > # CONFIG_MTD_L440GX is not set > CONFIG_MTD_INTEL_VR_NOR=y > # CONFIG_MTD_PLATRAM is not set > > # > # Self-contained MTD device drivers > # > # CONFIG_MTD_PMC551 is not set > # CONFIG_MTD_SLRAM is not set > CONFIG_MTD_PHRAM=y > # CONFIG_MTD_MTDRAM is not set > # CONFIG_MTD_BLOCK2MTD is not set > > # > # Disk-On-Chip Device Drivers > # > # CONFIG_MTD_DOC2000 is not set > # CONFIG_MTD_DOC2001 is not set > # CONFIG_MTD_DOC2001PLUS is not set > # CONFIG_MTD_DOCG3 is not set > CONFIG_MTD_NAND_ECC=m > # CONFIG_MTD_NAND_ECC_SMC is not set > CONFIG_MTD_NAND=m > # CONFIG_MTD_NAND_VERIFY_WRITE is not set > # CONFIG_MTD_NAND_ECC_BCH is not set > # CONFIG_MTD_SM_COMMON is not set > # CONFIG_MTD_NAND_MUSEUM_IDS is not set > # CONFIG_MTD_NAND_DENALI is not set > CONFIG_MTD_NAND_IDS=m > # CONFIG_MTD_NAND_RICOH is not set > # CONFIG_MTD_NAND_DISKONCHIP is not set > # CONFIG_MTD_NAND_CAFE is not set > CONFIG_MTD_NAND_CS553X=m > # CONFIG_MTD_NAND_NANDSIM is not set > # CONFIG_MTD_NAND_PLATFORM is not set > # CONFIG_MTD_ALAUDA is not set > # CONFIG_MTD_ONENAND is not set > > # > # LPDDR flash memory drivers > # > # CONFIG_MTD_LPDDR is not set > # CONFIG_MTD_UBI is not set > CONFIG_PARPORT=m > CONFIG_PARPORT_PC=m > # CONFIG_PARPORT_SERIAL is not set > # CONFIG_PARPORT_PC_FIFO is not set > # CONFIG_PARPORT_PC_SUPERIO is not set > # CONFIG_PARPORT_GSC is not set > # CONFIG_PARPORT_AX88796 is not set > # CONFIG_PARPORT_1284 is not set > CONFIG_PNP=y > # CONFIG_PNP_DEBUG_MESSAGES is not set > > # > # Protocols > # > CONFIG_ISAPNP=y > CONFIG_PNPBIOS=y > CONFIG_PNPBIOS_PROC_FS=y > CONFIG_PNPACPI=y > CONFIG_BLK_DEV=y > CONFIG_BLK_DEV_FD=m > # CONFIG_BLK_DEV_XD is not set > # CONFIG_PARIDE is not set > CONFIG_BLK_CPQ_DA=m > CONFIG_BLK_CPQ_CISS_DA=m > CONFIG_CISS_SCSI_TAPE=y > CONFIG_BLK_DEV_DAC960=m > CONFIG_BLK_DEV_UMEM=m > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=m > CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > CONFIG_BLK_DEV_DRBD=m > # CONFIG_DRBD_FAULT_INJECTION is not set > CONFIG_BLK_DEV_NBD=m > CONFIG_BLK_DEV_OSD=m > CONFIG_BLK_DEV_SX8=m > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=m > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=8192 > # CONFIG_BLK_DEV_XIP is not set > CONFIG_CDROM_PKTCDVD=m > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > # CONFIG_CDROM_PKTCDVD_WCACHE is not set > # CONFIG_ATA_OVER_ETH is not set > CONFIG_XEN_BLKDEV_FRONTEND=y > CONFIG_XEN_BLKDEV_BACKEND=y > # CONFIG_BLK_DEV_HD is not set > # CONFIG_BLK_DEV_RBD is not set > # CONFIG_SENSORS_LIS3LV02D is not set > CONFIG_MISC_DEVICES=y > # CONFIG_AD525X_DPOT is not set > # CONFIG_IBM_ASM is not set > CONFIG_PHANTOM=m > # CONFIG_INTEL_MID_PTI is not set > CONFIG_SGI_IOC4=m > CONFIG_TIFM_CORE=m > CONFIG_TIFM_7XX1=m > CONFIG_ICS932S401=m > CONFIG_ENCLOSURE_SERVICES=m > CONFIG_HP_ILO=m > # CONFIG_APDS9802ALS is not set > CONFIG_ISL29003=m > # CONFIG_ISL29020 is not set > CONFIG_SENSORS_TSL2550=m > # CONFIG_SENSORS_BH1780 is not set > # CONFIG_SENSORS_BH1770 is not set > # CONFIG_SENSORS_APDS990X is not set > # CONFIG_HMC6352 is not set > CONFIG_DS1682=m > # CONFIG_VMWARE_BALLOON is not set > # CONFIG_BMP085 is not set > # CONFIG_PCH_PHUB is not set > # CONFIG_USB_SWITCH_FSA9480 is not set > # CONFIG_C2PORT is not set > > # > # EEPROM support > # > CONFIG_EEPROM_AT24=m > CONFIG_EEPROM_LEGACY=m > CONFIG_EEPROM_MAX6875=m > CONFIG_EEPROM_93CX6=m > CONFIG_CB710_CORE=m > CONFIG_CB710_DEBUG=y > CONFIG_CB710_DEBUG_ASSUMPTIONS=y > > # > # Texas Instruments shared transport line discipline > # > # CONFIG_TI_ST is not set > # CONFIG_SENSORS_LIS3_I2C is not set > > # > # Altera FPGA firmware download module > # > # CONFIG_ALTERA_STAPL is not set > CONFIG_HAVE_IDE=y > # CONFIG_IDE is not set > > # > # SCSI device support > # > CONFIG_SCSI_MOD=m > CONFIG_RAID_ATTRS=m > CONFIG_SCSI=m > CONFIG_SCSI_DMA=y > CONFIG_SCSI_TGT=m > CONFIG_SCSI_NETLINK=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > CONFIG_CHR_DEV_ST=m > CONFIG_CHR_DEV_OSST=m > CONFIG_BLK_DEV_SR=m > CONFIG_BLK_DEV_SR_VENDOR=y > CONFIG_CHR_DEV_SG=m > CONFIG_CHR_DEV_SCH=m > CONFIG_SCSI_ENCLOSURE=m > CONFIG_SCSI_MULTI_LUN=y > CONFIG_SCSI_CONSTANTS=y > CONFIG_SCSI_LOGGING=y > CONFIG_SCSI_SCAN_ASYNC=y > CONFIG_SCSI_WAIT_SCAN=m > > # > # SCSI Transports > # > CONFIG_SCSI_SPI_ATTRS=m > CONFIG_SCSI_FC_ATTRS=m > CONFIG_SCSI_FC_TGT_ATTRS=y > CONFIG_SCSI_ISCSI_ATTRS=m > CONFIG_SCSI_SAS_ATTRS=m > CONFIG_SCSI_SAS_LIBSAS=m > CONFIG_SCSI_SAS_HOST_SMP=y > CONFIG_SCSI_SRP_ATTRS=m > CONFIG_SCSI_SRP_TGT_ATTRS=y > CONFIG_SCSI_LOWLEVEL=y > CONFIG_ISCSI_TCP=m > CONFIG_ISCSI_BOOT_SYSFS=m > # CONFIG_SCSI_CXGB3_ISCSI is not set > # CONFIG_SCSI_CXGB4_ISCSI is not set > CONFIG_SCSI_BNX2_ISCSI=m > CONFIG_SCSI_BNX2X_FCOE=m > # CONFIG_BE2ISCSI is not set > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_HPSA is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_3W_SAS is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC94XX is not set > # CONFIG_SCSI_MVSAS is not set > # CONFIG_SCSI_MVUMI is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_ARCMSR is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > CONFIG_SCSI_MPT2SAS=m > CONFIG_SCSI_MPT2SAS_MAX_SGE=128 > CONFIG_SCSI_MPT2SAS_LOGGING=y > # CONFIG_SCSI_HPTIOP is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_VMWARE_PVSCSI is not set > CONFIG_LIBFC=m > CONFIG_LIBFCOE=m > # CONFIG_FCOE is not set > # CONFIG_FCOE_FNIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_ISCI is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_STEX is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_FC is not set > # CONFIG_SCSI_QLA_ISCSI is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > CONFIG_SCSI_DEBUG=m > # CONFIG_SCSI_PMCRAID is not set > # CONFIG_SCSI_PM8001 is not set > # CONFIG_SCSI_SRP is not set > # CONFIG_SCSI_BFA_FC is not set > CONFIG_SCSI_DH=m > CONFIG_SCSI_DH_RDAC=m > CONFIG_SCSI_DH_HP_SW=m > # CONFIG_SCSI_DH_EMC is not set > CONFIG_SCSI_DH_ALUA=m > CONFIG_SCSI_OSD_INITIATOR=m > CONFIG_SCSI_OSD_ULD=m > CONFIG_SCSI_OSD_DPRINT_SENSE=1 > # CONFIG_SCSI_OSD_DEBUG is not set > # CONFIG_ATA is not set > CONFIG_MD=y > # CONFIG_BLK_DEV_MD is not set > CONFIG_BLK_DEV_DM=m > CONFIG_DM_DEBUG=y > # CONFIG_DM_CRYPT is not set > CONFIG_DM_SNAPSHOT=m > # CONFIG_DM_THIN_PROVISIONING is not set > CONFIG_DM_MIRROR=m > # CONFIG_DM_RAID is not set > CONFIG_DM_LOG_USERSPACE=m > CONFIG_DM_ZERO=m > CONFIG_DM_MULTIPATH=m > CONFIG_DM_MULTIPATH_QL=m > CONFIG_DM_MULTIPATH_ST=m > CONFIG_DM_DELAY=m > CONFIG_DM_UEVENT=y > # CONFIG_DM_FLAKEY is not set > # CONFIG_TARGET_CORE is not set > CONFIG_FUSION=y > # CONFIG_FUSION_SPI is not set > # CONFIG_FUSION_FC is not set > CONFIG_FUSION_SAS=m > CONFIG_FUSION_MAX_SGE=128 > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LOGGING is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_FIREWIRE is not set > # CONFIG_FIREWIRE_NOSY is not set > # CONFIG_I2O is not set > # CONFIG_MACINTOSH_DRIVERS is not set > CONFIG_NETDEVICES=y > CONFIG_NET_CORE=y > CONFIG_BONDING=m > CONFIG_DUMMY=m > CONFIG_EQUALIZER=m > CONFIG_NET_FC=y > CONFIG_MII=m > CONFIG_MACVLAN=m > CONFIG_MACVTAP=m > CONFIG_NETCONSOLE=y > # CONFIG_NETCONSOLE_DYNAMIC is not set > CONFIG_NETPOLL=y > # CONFIG_NETPOLL_TRAP is not set > CONFIG_NET_POLL_CONTROLLER=y > CONFIG_TUN=m > CONFIG_VETH=m > # CONFIG_ARCNET is not set > > # > # CAIF transport drivers > # > CONFIG_ETHERNET=y > CONFIG_MDIO=m > CONFIG_NET_VENDOR_3COM=y > # CONFIG_EL1 is not set > # CONFIG_EL3 is not set > # CONFIG_3C515 is not set > # CONFIG_VORTEX is not set > # CONFIG_TYPHOON is not set > CONFIG_NET_VENDOR_ADAPTEC=y > # CONFIG_ADAPTEC_STARFIRE is not set > CONFIG_NET_VENDOR_ALTEON=y > # CONFIG_ACENIC is not set > CONFIG_NET_VENDOR_AMD=y > # CONFIG_AMD8111_ETH is not set > # CONFIG_LANCE is not set > # CONFIG_PCNET32 is not set > # CONFIG_DEPCA is not set > # CONFIG_NI65 is not set > CONFIG_NET_VENDOR_ATHEROS=y > # CONFIG_ATL2 is not set > # CONFIG_ATL1 is not set > # CONFIG_ATL1E is not set > # CONFIG_ATL1C is not set > CONFIG_NET_VENDOR_BROADCOM=y > # CONFIG_B44 is not set > CONFIG_BNX2=m > CONFIG_CNIC=m > CONFIG_TIGON3=m > CONFIG_BNX2X=m > CONFIG_NET_VENDOR_BROCADE=y > # CONFIG_BNA is not set > CONFIG_NET_VENDOR_CHELSIO=y > # CONFIG_CHELSIO_T1 is not set > # CONFIG_CHELSIO_T3 is not set > # CONFIG_CHELSIO_T4 is not set > # CONFIG_CHELSIO_T4VF is not set > CONFIG_NET_VENDOR_CIRRUS=y > # CONFIG_CS89x0 is not set > CONFIG_NET_VENDOR_CISCO=y > # CONFIG_ENIC is not set > # CONFIG_DNET is not set > CONFIG_NET_VENDOR_DEC=y > # CONFIG_EWRK3 is not set > # CONFIG_NET_TULIP is not set > CONFIG_NET_VENDOR_DLINK=y > # CONFIG_DE600 is not set > # CONFIG_DE620 is not set > # CONFIG_DL2K is not set > # CONFIG_SUNDANCE is not set > CONFIG_NET_VENDOR_EMULEX=y > # CONFIG_BE2NET is not set > CONFIG_NET_VENDOR_EXAR=y > # CONFIG_S2IO is not set > # CONFIG_VXGE is not set > CONFIG_NET_VENDOR_FUJITSU=y > # CONFIG_AT1700 is not set > # CONFIG_ETH16I is not set > CONFIG_NET_VENDOR_HP=y > # CONFIG_HP100 is not set > CONFIG_NET_VENDOR_INTEL=y > # CONFIG_E100 is not set > # CONFIG_E1000 is not set > # CONFIG_E1000E is not set > # CONFIG_IGB is not set > # CONFIG_IGBVF is not set > # CONFIG_IXGB is not set > # CONFIG_IXGBE is not set > # CONFIG_IXGBEVF is not set > CONFIG_NET_VENDOR_I825XX=y > # CONFIG_ELPLUS is not set > # CONFIG_EL16 is not set > # CONFIG_APRICOT is not set > # CONFIG_EEXPRESS is not set > # CONFIG_EEXPRESS_PRO is not set > # CONFIG_LP486E is not set > # CONFIG_NI52 is not set > # CONFIG_ZNET is not set > # CONFIG_IP1000 is not set > # CONFIG_JME is not set > CONFIG_NET_VENDOR_MARVELL=y > # CONFIG_SKGE is not set > # CONFIG_SKY2 is not set > CONFIG_NET_VENDOR_MELLANOX=y > # CONFIG_MLX4_EN is not set > # CONFIG_MLX4_CORE is not set > CONFIG_NET_VENDOR_MICREL=y > # CONFIG_KS8842 is not set > # CONFIG_KS8851_MLL is not set > # CONFIG_KSZ884X_PCI is not set > CONFIG_NET_VENDOR_MYRI=y > # CONFIG_MYRI10GE is not set > # CONFIG_FEALNX is not set > CONFIG_NET_VENDOR_NATSEMI=y > # CONFIG_NATSEMI is not set > # CONFIG_NS83820 is not set > CONFIG_NET_VENDOR_8390=y > # CONFIG_EL2 is not set > # CONFIG_AC3200 is not set > # CONFIG_E2100 is not set > # CONFIG_HPLAN_PLUS is not set > # CONFIG_HPLAN is not set > # CONFIG_NE2000 is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_ULTRA is not set > # CONFIG_WD80x3 is not set > CONFIG_NET_VENDOR_NVIDIA=y > # CONFIG_FORCEDETH is not set > CONFIG_NET_VENDOR_OKI=y > # CONFIG_PCH_GBE is not set > # CONFIG_ETHOC is not set > # CONFIG_NET_PACKET_ENGINE is not set > CONFIG_NET_VENDOR_QLOGIC=y > # CONFIG_QLA3XXX is not set > # CONFIG_QLCNIC is not set > # CONFIG_QLGE is not set > # CONFIG_NETXEN_NIC is not set > CONFIG_NET_VENDOR_RACAL=y > CONFIG_NET_VENDOR_REALTEK=y > # CONFIG_ATP is not set > # CONFIG_8139CP is not set > # CONFIG_8139TOO is not set > # CONFIG_R8169 is not set > CONFIG_NET_VENDOR_RDC=y > # CONFIG_R6040 is not set > CONFIG_NET_VENDOR_SEEQ=y > # CONFIG_SEEQ8005 is not set > CONFIG_NET_VENDOR_SILAN=y > # CONFIG_SC92031 is not set > CONFIG_NET_VENDOR_SIS=y > # CONFIG_SIS900 is not set > # CONFIG_SIS190 is not set > # CONFIG_SFC is not set > CONFIG_NET_VENDOR_SMSC=y > # CONFIG_SMC9194 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SMSC9420 is not set > CONFIG_NET_VENDOR_STMICRO=y > # CONFIG_STMMAC_ETH is not set > CONFIG_NET_VENDOR_SUN=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NIU is not set > CONFIG_NET_VENDOR_TEHUTI=y > # CONFIG_TEHUTI is not set > CONFIG_NET_VENDOR_TI=y > # CONFIG_TLAN is not set > CONFIG_NET_VENDOR_VIA=y > # CONFIG_VIA_RHINE is not set > # CONFIG_VIA_VELOCITY is not set > CONFIG_FDDI=y > CONFIG_DEFXX=m > # CONFIG_DEFXX_MMIO is not set > CONFIG_SKFP=m > # CONFIG_HIPPI is not set > CONFIG_NET_SB1000=m > CONFIG_PHYLIB=y > > # > # MII PHY device drivers > # > CONFIG_MARVELL_PHY=m > CONFIG_DAVICOM_PHY=m > CONFIG_QSEMI_PHY=m > CONFIG_LXT_PHY=m > CONFIG_CICADA_PHY=m > CONFIG_VITESSE_PHY=m > CONFIG_SMSC_PHY=m > CONFIG_BROADCOM_PHY=m > CONFIG_ICPLUS_PHY=m > CONFIG_REALTEK_PHY=m > CONFIG_NATIONAL_PHY=m > CONFIG_STE10XP=m > CONFIG_LSI_ET1011C_PHY=y > # CONFIG_MICREL_PHY is not set > # CONFIG_FIXED_PHY is not set > CONFIG_MDIO_BITBANG=m > # CONFIG_MDIO_GPIO is not set > CONFIG_PLIP=m > CONFIG_PPP=m > CONFIG_PPP_BSDCOMP=m > CONFIG_PPP_DEFLATE=m > CONFIG_PPP_FILTER=y > CONFIG_PPP_MPPE=m > CONFIG_PPP_MULTILINK=y > CONFIG_PPPOE=m > CONFIG_PPP_ASYNC=m > CONFIG_PPP_SYNC_TTY=m > CONFIG_SLIP=m > CONFIG_SLHC=m > CONFIG_SLIP_COMPRESSED=y > CONFIG_SLIP_SMART=y > CONFIG_SLIP_MODE_SLIP6=y > # CONFIG_TR is not set > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > # CONFIG_USB_IPHETH is not set > # CONFIG_WLAN is not set > > # > # Enable WiMAX (Networking options) to see the WiMAX drivers > # > # CONFIG_WAN is not set > CONFIG_XEN_NETDEV_FRONTEND=y > CONFIG_XEN_NETDEV_BACKEND=y > CONFIG_VMXNET3=m > # CONFIG_ISDN is not set > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > CONFIG_INPUT_FF_MEMLESS=y > CONFIG_INPUT_POLLDEV=y > CONFIG_INPUT_SPARSEKMAP=m > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > # CONFIG_INPUT_MOUSEDEV_PSAUX is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ADP5588=y > CONFIG_KEYBOARD_ADP5589=y > CONFIG_KEYBOARD_ATKBD=y > CONFIG_KEYBOARD_QT1070=y > CONFIG_KEYBOARD_QT2160=y > CONFIG_KEYBOARD_LKKBD=y > CONFIG_KEYBOARD_GPIO=y > CONFIG_KEYBOARD_GPIO_POLLED=y > CONFIG_KEYBOARD_TCA6416=y > CONFIG_KEYBOARD_MATRIX=y > CONFIG_KEYBOARD_LM8323=y > CONFIG_KEYBOARD_MAX7359=y > CONFIG_KEYBOARD_MCS=y > CONFIG_KEYBOARD_MPR121=y > CONFIG_KEYBOARD_NEWTON=y > CONFIG_KEYBOARD_OPENCORES=y > CONFIG_KEYBOARD_STOWAWAY=y > CONFIG_KEYBOARD_SUNKBD=y > CONFIG_KEYBOARD_XTKBD=y > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=m > CONFIG_MOUSE_PS2_ALPS=y > CONFIG_MOUSE_PS2_LOGIPS2PP=y > CONFIG_MOUSE_PS2_SYNAPTICS=y > CONFIG_MOUSE_PS2_LIFEBOOK=y > CONFIG_MOUSE_PS2_TRACKPOINT=y > CONFIG_MOUSE_PS2_ELANTECH=y > CONFIG_MOUSE_PS2_SENTELIC=y > # CONFIG_MOUSE_PS2_TOUCHKIT is not set > CONFIG_MOUSE_SERIAL=m > CONFIG_MOUSE_APPLETOUCH=m > CONFIG_MOUSE_BCM5974=m > CONFIG_MOUSE_INPORT=m > # CONFIG_MOUSE_ATIXL is not set > CONFIG_MOUSE_LOGIBM=m > CONFIG_MOUSE_PC110PAD=m > CONFIG_MOUSE_VSXXXAA=m > # CONFIG_MOUSE_GPIO is not set > CONFIG_MOUSE_SYNAPTICS_I2C=m > CONFIG_INPUT_JOYSTICK=y > CONFIG_JOYSTICK_ANALOG=m > CONFIG_JOYSTICK_A3D=m > CONFIG_JOYSTICK_ADI=m > CONFIG_JOYSTICK_COBRA=m > CONFIG_JOYSTICK_GF2K=m > CONFIG_JOYSTICK_GRIP=m > CONFIG_JOYSTICK_GRIP_MP=m > CONFIG_JOYSTICK_GUILLEMOT=m > CONFIG_JOYSTICK_INTERACT=m > # CONFIG_JOYSTICK_SIDEWINDER is not set > CONFIG_JOYSTICK_TMDC=m > CONFIG_JOYSTICK_IFORCE=m > # CONFIG_JOYSTICK_IFORCE_USB is not set > CONFIG_JOYSTICK_IFORCE_232=y > CONFIG_JOYSTICK_WARRIOR=m > CONFIG_JOYSTICK_MAGELLAN=m > CONFIG_JOYSTICK_SPACEORB=m > CONFIG_JOYSTICK_SPACEBALL=m > CONFIG_JOYSTICK_STINGER=m > CONFIG_JOYSTICK_TWIDJOY=m > CONFIG_JOYSTICK_ZHENHUA=m > CONFIG_JOYSTICK_DB9=m > CONFIG_JOYSTICK_GAMECON=m > CONFIG_JOYSTICK_TURBOGRAFX=m > # CONFIG_JOYSTICK_AS5011 is not set > CONFIG_JOYSTICK_JOYDUMP=m > CONFIG_JOYSTICK_XPAD=m > CONFIG_JOYSTICK_XPAD_FF=y > CONFIG_JOYSTICK_XPAD_LEDS=y > CONFIG_JOYSTICK_WALKERA0701=m > # CONFIG_INPUT_TABLET is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > CONFIG_INPUT_MISC=y > # CONFIG_INPUT_AD714X is not set > # CONFIG_INPUT_BMA150 is not set > # CONFIG_INPUT_PCSPKR is not set > # CONFIG_INPUT_MMA8450 is not set > # CONFIG_INPUT_MPU3050 is not set > # CONFIG_INPUT_APANEL is not set > # CONFIG_INPUT_WISTRON_BTNS is not set > # CONFIG_INPUT_ATLAS_BTNS is not set > # CONFIG_INPUT_ATI_REMOTE2 is not set > # CONFIG_INPUT_KEYSPAN_REMOTE is not set > # CONFIG_INPUT_KXTJ9 is not set > # CONFIG_INPUT_POWERMATE is not set > # CONFIG_INPUT_YEALINK is not set > # CONFIG_INPUT_CM109 is not set > CONFIG_INPUT_UINPUT=y > # CONFIG_INPUT_PCF8574 is not set > # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set > # CONFIG_INPUT_ADXL34X is not set > # CONFIG_INPUT_CMA3000 is not set > CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > CONFIG_SERIO_SERPORT=m > CONFIG_SERIO_CT82C710=m > CONFIG_SERIO_PARKBD=m > CONFIG_SERIO_PCIPS2=m > CONFIG_SERIO_LIBPS2=y > CONFIG_SERIO_RAW=m > # CONFIG_SERIO_ALTERA_PS2 is not set > # CONFIG_SERIO_PS2MULT is not set > CONFIG_GAMEPORT=m > CONFIG_GAMEPORT_NS558=m > CONFIG_GAMEPORT_L4=m > CONFIG_GAMEPORT_EMU10K1=m > CONFIG_GAMEPORT_FM801=m > > # > # Character devices > # > CONFIG_VT=y > CONFIG_CONSOLE_TRANSLATIONS=y > CONFIG_VT_CONSOLE=y > CONFIG_VT_CONSOLE_SLEEP=y > CONFIG_HW_CONSOLE=y > CONFIG_VT_HW_CONSOLE_BINDING=y > CONFIG_UNIX98_PTYS=y > CONFIG_DEVPTS_MULTIPLE_INSTANCES=y > # CONFIG_LEGACY_PTYS is not set > CONFIG_SERIAL_NONSTANDARD=y > # CONFIG_ROCKETPORT is not set > # CONFIG_CYCLADES is not set > # CONFIG_MOXA_INTELLIO is not set > # CONFIG_MOXA_SMARTIO is not set > # CONFIG_SYNCLINK is not set > # CONFIG_SYNCLINKMP is not set > # CONFIG_SYNCLINK_GT is not set > # CONFIG_NOZOMI is not set > # CONFIG_ISI is not set > # CONFIG_N_HDLC is not set > # CONFIG_N_GSM is not set > # CONFIG_TRACE_SINK is not set > # CONFIG_DEVKMEM is not set > # CONFIG_STALDRV is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_FIX_EARLYCON_MEM=y > CONFIG_SERIAL_8250_PCI=y > CONFIG_SERIAL_8250_PNP=y > CONFIG_SERIAL_8250_NR_UARTS=32 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > CONFIG_SERIAL_8250_MANY_PORTS=y > CONFIG_SERIAL_8250_FOURPORT=m > # CONFIG_SERIAL_8250_ACCENT is not set > # CONFIG_SERIAL_8250_BOCA is not set > # CONFIG_SERIAL_8250_EXAR_ST16C554 is not set > CONFIG_SERIAL_8250_HUB6=y > CONFIG_SERIAL_8250_SHARE_IRQ=y > CONFIG_SERIAL_8250_DETECT_IRQ=y > CONFIG_SERIAL_8250_RSA=y > > # > # Non-8250 serial port support > # > # CONFIG_SERIAL_MFD_HSU is not set > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_CONSOLE_POLL=y > CONFIG_SERIAL_JSM=m > # CONFIG_SERIAL_TIMBERDALE is not set > # CONFIG_SERIAL_ALTERA_JTAGUART is not set > # CONFIG_SERIAL_ALTERA_UART is not set > # CONFIG_SERIAL_PCH_UART is not set > # CONFIG_SERIAL_XILINX_PS_UART is not set > # CONFIG_PRINTER is not set > CONFIG_PPDEV=m > CONFIG_HVC_DRIVER=y > CONFIG_HVC_IRQ=y > CONFIG_HVC_XEN=y > CONFIG_IPMI_HANDLER=m > # CONFIG_IPMI_PANIC_EVENT is not set > CONFIG_IPMI_DEVICE_INTERFACE=m > CONFIG_IPMI_SI=m > CONFIG_IPMI_WATCHDOG=m > CONFIG_IPMI_POWEROFF=m > CONFIG_HW_RANDOM=y > CONFIG_HW_RANDOM_TIMERIOMEM=y > CONFIG_HW_RANDOM_INTEL=y > CONFIG_HW_RANDOM_AMD=y > CONFIG_HW_RANDOM_GEODE=y > CONFIG_HW_RANDOM_VIA=y > CONFIG_NVRAM=y > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > # CONFIG_MWAVE is not set > # CONFIG_SCx200_GPIO is not set > # CONFIG_PC8736x_GPIO is not set > # CONFIG_NSC_GPIO is not set > CONFIG_RAW_DRIVER=y > CONFIG_MAX_RAW_DEVS=256 > CONFIG_HPET=y > CONFIG_HPET_MMAP=y > CONFIG_HANGCHECK_TIMER=m > # CONFIG_TCG_TPM is not set > CONFIG_TELCLOCK=y > CONFIG_DEVPORT=y > CONFIG_RAMOOPS=m > CONFIG_I2C=y > CONFIG_I2C_BOARDINFO=y > # CONFIG_I2C_COMPAT is not set > # CONFIG_I2C_CHARDEV is not set > # CONFIG_I2C_MUX is not set > # CONFIG_I2C_HELPER_AUTO is not set > CONFIG_I2C_SMBUS=m > > # > # I2C Algorithms > # > CONFIG_I2C_ALGOBIT=m > # CONFIG_I2C_ALGOPCF is not set > CONFIG_I2C_ALGOPCA=m > > # > # I2C Hardware Bus support > # > > # > # PC SMBus host controller drivers > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI1563 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > CONFIG_I2C_I801=m > CONFIG_I2C_ISCH=m > CONFIG_I2C_PIIX4=m > CONFIG_I2C_NFORCE2=m > CONFIG_I2C_NFORCE2_S4985=m > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > CONFIG_I2C_VIA=m > CONFIG_I2C_VIAPRO=m > > # > # ACPI drivers > # > CONFIG_I2C_SCMI=m > > # > # I2C system bus drivers (mostly embedded / system-on-chip) > # > # CONFIG_I2C_DESIGNWARE_PCI is not set > # CONFIG_I2C_GPIO is not set > # CONFIG_I2C_INTEL_MID is not set > CONFIG_I2C_OCORES=m > CONFIG_I2C_PCA_PLATFORM=m > # CONFIG_I2C_PXA_PCI is not set > CONFIG_I2C_SIMTEC=m > # CONFIG_I2C_XILINX is not set > # CONFIG_I2C_EG20T is not set > > # > # External I2C/SMBus adapter drivers > # > # CONFIG_I2C_DIOLAN_U2C is not set > CONFIG_I2C_PARPORT=m > CONFIG_I2C_PARPORT_LIGHT=m > CONFIG_I2C_TAOS_EVM=m > # CONFIG_I2C_TINY_USB is not set > > # > # Other I2C/SMBus bus drivers > # > CONFIG_I2C_PCA_ISA=m > CONFIG_I2C_STUB=m > CONFIG_SCx200_ACB=m > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_SPI is not set > > # > # PPS support > # > # CONFIG_PPS is not set > > # > # PPS generators support > # > > # > # PTP clock support > # > > # > # Enable Device Drivers -> PPS to see the PTP clock options. > # > CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y > CONFIG_GPIOLIB=y > # CONFIG_DEBUG_GPIO is not set > # CONFIG_GPIO_SYSFS is not set > > # > # Memory mapped GPIO drivers: > # > # CONFIG_GPIO_GENERIC_PLATFORM is not set > # CONFIG_GPIO_IT8761E is not set > # CONFIG_GPIO_SCH is not set > # CONFIG_GPIO_VX855 is not set > > # > # I2C GPIO expanders: > # > # CONFIG_GPIO_MAX7300 is not set > # CONFIG_GPIO_MAX732X is not set > # CONFIG_GPIO_PCA953X is not set > # CONFIG_GPIO_PCF857X is not set > # CONFIG_GPIO_SX150X is not set > # CONFIG_GPIO_ADP5588 is not set > > # > # PCI GPIO expanders: > # > # CONFIG_GPIO_BT8XX is not set > # CONFIG_GPIO_LANGWELL is not set > # CONFIG_GPIO_PCH is not set > # CONFIG_GPIO_ML_IOH is not set > # CONFIG_GPIO_RDC321X is not set > > # > # SPI GPIO expanders: > # > # CONFIG_GPIO_MCP23S08 is not set > > # > # AC97 GPIO expanders: > # > > # > # MODULbus GPIO expanders: > # > # CONFIG_W1 is not set > CONFIG_POWER_SUPPLY=y > # CONFIG_POWER_SUPPLY_DEBUG is not set > CONFIG_PDA_POWER=m > # CONFIG_TEST_POWER is not set > # CONFIG_BATTERY_DS2780 is not set > # CONFIG_BATTERY_DS2782 is not set > # CONFIG_BATTERY_BQ20Z75 is not set > # CONFIG_BATTERY_BQ27x00 is not set > # CONFIG_BATTERY_MAX17040 is not set > # CONFIG_BATTERY_MAX17042 is not set > # CONFIG_CHARGER_MAX8903 is not set > # CONFIG_CHARGER_GPIO is not set > CONFIG_HWMON=m > CONFIG_HWMON_VID=m > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Native drivers > # > # CONFIG_SENSORS_ABITUGURU is not set > # CONFIG_SENSORS_ABITUGURU3 is not set > # CONFIG_SENSORS_AD7414 is not set > # CONFIG_SENSORS_AD7418 is not set > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ADM1025 is not set > # CONFIG_SENSORS_ADM1026 is not set > # CONFIG_SENSORS_ADM1029 is not set > # CONFIG_SENSORS_ADM1031 is not set > # CONFIG_SENSORS_ADM9240 is not set > # CONFIG_SENSORS_ADT7411 is not set > # CONFIG_SENSORS_ADT7462 is not set > # CONFIG_SENSORS_ADT7470 is not set > # CONFIG_SENSORS_ADT7475 is not set > # CONFIG_SENSORS_ASC7621 is not set > CONFIG_SENSORS_K8TEMP=m > CONFIG_SENSORS_K10TEMP=m > # CONFIG_SENSORS_FAM15H_POWER is not set > # CONFIG_SENSORS_ASB100 is not set > CONFIG_SENSORS_ATXP1=m > # CONFIG_SENSORS_DS620 is not set > CONFIG_SENSORS_DS1621=m > CONFIG_SENSORS_I5K_AMB=m > CONFIG_SENSORS_F71805F=m > CONFIG_SENSORS_F71882FG=m > CONFIG_SENSORS_F75375S=m > CONFIG_SENSORS_FSCHMD=m > CONFIG_SENSORS_G760A=m > CONFIG_SENSORS_GL518SM=m > CONFIG_SENSORS_GL520SM=m > # CONFIG_SENSORS_GPIO_FAN is not set > CONFIG_SENSORS_CORETEMP=m > # CONFIG_SENSORS_IBMAEM is not set > # CONFIG_SENSORS_IBMPEX is not set > CONFIG_SENSORS_IT87=m > # CONFIG_SENSORS_JC42 is not set > # CONFIG_SENSORS_LINEAGE is not set > CONFIG_SENSORS_LM63=m > # CONFIG_SENSORS_LM73 is not set > CONFIG_SENSORS_LM75=m > CONFIG_SENSORS_LM77=m > CONFIG_SENSORS_LM78=m > CONFIG_SENSORS_LM80=m > CONFIG_SENSORS_LM83=m > CONFIG_SENSORS_LM85=m > CONFIG_SENSORS_LM87=m > CONFIG_SENSORS_LM90=m > CONFIG_SENSORS_LM92=m > CONFIG_SENSORS_LM93=m > # CONFIG_SENSORS_LTC4151 is not set > CONFIG_SENSORS_LTC4215=m > CONFIG_SENSORS_LTC4245=m > # CONFIG_SENSORS_LTC4261 is not set > CONFIG_SENSORS_LM95241=m > # CONFIG_SENSORS_LM95245 is not set > # CONFIG_SENSORS_MAX16065 is not set > CONFIG_SENSORS_MAX1619=m > # CONFIG_SENSORS_MAX1668 is not set > # CONFIG_SENSORS_MAX6639 is not set > # CONFIG_SENSORS_MAX6642 is not set > CONFIG_SENSORS_MAX6650=m > # CONFIG_SENSORS_NTC_THERMISTOR is not set > CONFIG_SENSORS_PC87360=m > CONFIG_SENSORS_PC87427=m > CONFIG_SENSORS_PCF8591=m > # CONFIG_PMBUS is not set > # CONFIG_SENSORS_SHT15 is not set > # CONFIG_SENSORS_SHT21 is not set > CONFIG_SENSORS_SIS5595=m > # CONFIG_SENSORS_SMM665 is not set > CONFIG_SENSORS_DME1737=m > # CONFIG_SENSORS_EMC1403 is not set > # CONFIG_SENSORS_EMC2103 is not set > # CONFIG_SENSORS_EMC6W201 is not set > CONFIG_SENSORS_SMSC47M1=m > CONFIG_SENSORS_SMSC47M192=m > CONFIG_SENSORS_SMSC47B397=m > # CONFIG_SENSORS_SCH56XX_COMMON is not set > # CONFIG_SENSORS_SCH5627 is not set > # CONFIG_SENSORS_SCH5636 is not set > # CONFIG_SENSORS_ADS1015 is not set > CONFIG_SENSORS_ADS7828=m > # CONFIG_SENSORS_AMC6821 is not set > CONFIG_SENSORS_THMC50=m > # CONFIG_SENSORS_TMP102 is not set > CONFIG_SENSORS_TMP401=m > CONFIG_SENSORS_TMP421=m > CONFIG_SENSORS_VIA_CPUTEMP=m > CONFIG_SENSORS_VIA686A=m > CONFIG_SENSORS_VT1211=m > CONFIG_SENSORS_VT8231=m > CONFIG_SENSORS_W83781D=m > CONFIG_SENSORS_W83791D=m > CONFIG_SENSORS_W83792D=m > CONFIG_SENSORS_W83793=m > # CONFIG_SENSORS_W83795 is not set > CONFIG_SENSORS_W83L785TS=m > CONFIG_SENSORS_W83L786NG=m > CONFIG_SENSORS_W83627HF=m > CONFIG_SENSORS_W83627EHF=m > CONFIG_SENSORS_APPLESMC=m > > # > # ACPI drivers > # > # CONFIG_SENSORS_ACPI_POWER is not set > CONFIG_SENSORS_ATK0110=m > CONFIG_THERMAL=m > CONFIG_THERMAL_HWMON=y > CONFIG_WATCHDOG=y > # CONFIG_WATCHDOG_CORE is not set > # CONFIG_WATCHDOG_NOWAYOUT is not set > > # > # Watchdog Device Drivers > # > CONFIG_SOFT_WATCHDOG=y > CONFIG_ACQUIRE_WDT=m > CONFIG_ADVANTECH_WDT=m > CONFIG_ALIM1535_WDT=m > CONFIG_ALIM7101_WDT=m > CONFIG_F71808E_WDT=m > # CONFIG_SP5100_TCO is not set > CONFIG_SC520_WDT=y > # CONFIG_SBC_FITPC2_WATCHDOG is not set > CONFIG_EUROTECH_WDT=m > CONFIG_IB700_WDT=m > # CONFIG_IBMASR is not set > CONFIG_WAFER_WDT=m > CONFIG_I6300ESB_WDT=m > CONFIG_ITCO_WDT=m > CONFIG_ITCO_VENDOR_SUPPORT=y > CONFIG_IT8712F_WDT=m > CONFIG_IT87_WDT=m > # CONFIG_HP_WATCHDOG is not set > CONFIG_SC1200_WDT=m > CONFIG_SCx200_WDT=m > CONFIG_PC87413_WDT=m > # CONFIG_NV_TCO is not set > CONFIG_60XX_WDT=m > CONFIG_SBC8360_WDT=m > CONFIG_SBC7240_WDT=m > CONFIG_CPU5_WDT=m > CONFIG_SMSC_SCH311X_WDT=m > CONFIG_SMSC37B787_WDT=m > CONFIG_W83627HF_WDT=m > CONFIG_W83697HF_WDT=m > CONFIG_W83697UG_WDT=m > CONFIG_W83877F_WDT=m > CONFIG_W83977F_WDT=m > CONFIG_MACHZ_WDT=m > # CONFIG_SBC_EPX_C3_WATCHDOG is not set > CONFIG_XEN_WDT=y > > # > # ISA-based Watchdog Cards > # > # CONFIG_PCWATCHDOG is not set > CONFIG_MIXCOMWD=m > CONFIG_WDT=m > > # > # PCI-based Watchdog Cards > # > # CONFIG_PCIPCWATCHDOG is not set > CONFIG_WDTPCI=m > > # > # USB-based Watchdog Cards > # > # CONFIG_USBPCWATCHDOG is not set > CONFIG_SSB_POSSIBLE=y > > # > # Sonics Silicon Backplane > # > CONFIG_SSB=y > CONFIG_SSB_SPROM=y > CONFIG_SSB_PCIHOST_POSSIBLE=y > CONFIG_SSB_PCIHOST=y > # CONFIG_SSB_B43_PCI_BRIDGE is not set > # CONFIG_SSB_DEBUG is not set > CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y > CONFIG_SSB_DRIVER_PCICORE=y > CONFIG_BCMA_POSSIBLE=y > > # > # Broadcom specific AMBA > # > # CONFIG_BCMA is not set > > # > # Multifunction device drivers > # > CONFIG_MFD_CORE=m > # CONFIG_MFD_88PM860X is not set > # CONFIG_MFD_SM501 is not set > # CONFIG_HTC_PASIC3 is not set > # CONFIG_HTC_I2CPLD is not set > # CONFIG_TPS6105X is not set > # CONFIG_TPS65010 is not set > # CONFIG_TPS6507X is not set > # CONFIG_MFD_TPS6586X is not set > # CONFIG_MFD_TPS65910 is not set > # CONFIG_MFD_TPS65912_I2C is not set > # CONFIG_TWL4030_CORE is not set > # CONFIG_MFD_STMPE is not set > # CONFIG_MFD_TC3589X is not set > # CONFIG_MFD_TMIO is not set > # CONFIG_PMIC_DA903X is not set > # CONFIG_PMIC_ADP5520 is not set > # CONFIG_MFD_MAX8925 is not set > # CONFIG_MFD_MAX8997 is not set > # CONFIG_MFD_MAX8998 is not set > # CONFIG_MFD_WM8400 is not set > # CONFIG_MFD_WM831X_I2C is not set > # CONFIG_MFD_WM8350_I2C is not set > # CONFIG_MFD_WM8994 is not set > # CONFIG_MFD_PCF50633 is not set > # CONFIG_ABX500_CORE is not set > # CONFIG_MFD_CS5535 is not set > # CONFIG_MFD_TIMBERDALE is not set > CONFIG_LPC_SCH=m > # CONFIG_MFD_RDC321X is not set > # CONFIG_MFD_JANZ_CMODIO is not set > # CONFIG_MFD_VX855 is not set > # CONFIG_MFD_WL1273_CORE is not set > # CONFIG_MFD_AAT2870_CORE is not set > # CONFIG_REGULATOR is not set > # CONFIG_MEDIA_SUPPORT is not set > > # > # Graphics support > # > CONFIG_AGP=y > CONFIG_AGP_ALI=y > CONFIG_AGP_ATI=y > CONFIG_AGP_AMD=y > CONFIG_AGP_AMD64=y > CONFIG_AGP_INTEL=y > CONFIG_AGP_NVIDIA=y > CONFIG_AGP_SIS=y > CONFIG_AGP_SWORKS=y > CONFIG_AGP_VIA=y > CONFIG_AGP_EFFICEON=y > CONFIG_VGA_ARB=y > CONFIG_VGA_ARB_MAX_GPUS=16 > # CONFIG_VGA_SWITCHEROO is not set > CONFIG_DRM=m > # CONFIG_DRM_TDFX is not set > # CONFIG_DRM_R128 is not set > # CONFIG_DRM_RADEON is not set > # CONFIG_DRM_I810 is not set > # CONFIG_DRM_I915 is not set > CONFIG_DRM_MGA=m > # CONFIG_DRM_SIS is not set > # CONFIG_DRM_VIA is not set > # CONFIG_DRM_SAVAGE is not set > # CONFIG_DRM_VMWGFX is not set > # CONFIG_STUB_POULSBO is not set > CONFIG_VGASTATE=m > # CONFIG_VIDEO_OUTPUT_CONTROL is not set > CONFIG_FB=y > CONFIG_FIRMWARE_EDID=y > CONFIG_FB_DDC=m > CONFIG_FB_BOOT_VESA_SUPPORT=y > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set > CONFIG_FB_SYS_FILLRECT=y > CONFIG_FB_SYS_COPYAREA=y > CONFIG_FB_SYS_IMAGEBLIT=y > # CONFIG_FB_FOREIGN_ENDIAN is not set > CONFIG_FB_SYS_FOPS=y > # CONFIG_FB_WMT_GE_ROPS is not set > CONFIG_FB_DEFERRED_IO=y > CONFIG_FB_HECUBA=m > CONFIG_FB_SVGALIB=m > # CONFIG_FB_MACMODES is not set > CONFIG_FB_BACKLIGHT=y > CONFIG_FB_MODE_HELPERS=y > CONFIG_FB_TILEBLITTING=y > > # > # Frame buffer hardware drivers > # > CONFIG_FB_CIRRUS=m > CONFIG_FB_PM2=m > CONFIG_FB_PM2_FIFO_DISCONNECT=y > CONFIG_FB_CYBER2000=m > CONFIG_FB_CYBER2000_DDC=y > CONFIG_FB_ARC=m > # CONFIG_FB_ASILIANT is not set > # CONFIG_FB_IMSTT is not set > CONFIG_FB_VGA16=m > CONFIG_FB_UVESA=m > CONFIG_FB_VESA=y > CONFIG_FB_N411=m > CONFIG_FB_HGA=m > CONFIG_FB_S1D13XXX=m > CONFIG_FB_NVIDIA=m > CONFIG_FB_NVIDIA_I2C=y > # CONFIG_FB_NVIDIA_DEBUG is not set > CONFIG_FB_NVIDIA_BACKLIGHT=y > # CONFIG_FB_RIVA is not set > CONFIG_FB_I810=m > # CONFIG_FB_I810_GTF is not set > CONFIG_FB_LE80578=m > CONFIG_FB_CARILLO_RANCH=m > CONFIG_FB_MATROX=m > CONFIG_FB_MATROX_MILLENIUM=y > CONFIG_FB_MATROX_MYSTIQUE=y > CONFIG_FB_MATROX_G=y > CONFIG_FB_MATROX_I2C=m > CONFIG_FB_MATROX_MAVEN=m > CONFIG_FB_RADEON=m > CONFIG_FB_RADEON_I2C=y > CONFIG_FB_RADEON_BACKLIGHT=y > # CONFIG_FB_RADEON_DEBUG is not set > CONFIG_FB_ATY128=m > CONFIG_FB_ATY128_BACKLIGHT=y > CONFIG_FB_ATY=m > CONFIG_FB_ATY_CT=y > CONFIG_FB_ATY_GENERIC_LCD=y > CONFIG_FB_ATY_GX=y > CONFIG_FB_ATY_BACKLIGHT=y > CONFIG_FB_S3=m > CONFIG_FB_S3_DDC=y > CONFIG_FB_SAVAGE=m > CONFIG_FB_SAVAGE_I2C=y > # CONFIG_FB_SAVAGE_ACCEL is not set > CONFIG_FB_SIS=m > CONFIG_FB_SIS_300=y > CONFIG_FB_SIS_315=y > CONFIG_FB_VIA=m > # CONFIG_FB_VIA_DIRECT_PROCFS is not set > # CONFIG_FB_VIA_X_COMPATIBILITY is not set > CONFIG_FB_NEOMAGIC=m > CONFIG_FB_KYRO=m > CONFIG_FB_3DFX=m > # CONFIG_FB_3DFX_ACCEL is not set > CONFIG_FB_3DFX_I2C=y > CONFIG_FB_VOODOO1=m > CONFIG_FB_VT8623=m > # CONFIG_FB_TRIDENT is not set > CONFIG_FB_ARK=m > CONFIG_FB_PM3=m > # CONFIG_FB_CARMINE is not set > CONFIG_FB_GEODE=y > CONFIG_FB_GEODE_LX=m > CONFIG_FB_GEODE_GX=m > CONFIG_FB_GEODE_GX1=m > # CONFIG_FB_TMIO is not set > # CONFIG_FB_SMSCUFX is not set > # CONFIG_FB_UDL is not set > CONFIG_FB_VIRTUAL=m > CONFIG_XEN_FBDEV_FRONTEND=y > CONFIG_FB_METRONOME=m > CONFIG_FB_MB862XX=m > CONFIG_FB_MB862XX_PCI_GDC=y > CONFIG_FB_MB862XX_I2C=y > # CONFIG_FB_BROADSHEET is not set > CONFIG_BACKLIGHT_LCD_SUPPORT=y > # CONFIG_LCD_CLASS_DEVICE is not set > CONFIG_BACKLIGHT_CLASS_DEVICE=y > # CONFIG_BACKLIGHT_GENERIC is not set > # CONFIG_BACKLIGHT_PROGEAR is not set > # CONFIG_BACKLIGHT_APPLE is not set > # CONFIG_BACKLIGHT_SAHARA is not set > # CONFIG_BACKLIGHT_ADP8860 is not set > # CONFIG_BACKLIGHT_ADP8870 is not set > > # > # Display device support > # > # CONFIG_DISPLAY_SUPPORT is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_VGACON_SOFT_SCROLLBACK=y > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 > # CONFIG_MDA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > # CONFIG_LOGO is not set > # CONFIG_SOUND is not set > # CONFIG_HID_SUPPORT is not set > CONFIG_USB_SUPPORT=y > CONFIG_USB_COMMON=y > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > CONFIG_USB_ARCH_HAS_XHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > > # > # Miscellaneous USB options > # > # CONFIG_USB_DEVICEFS is not set > CONFIG_USB_DEVICE_CLASS=y > CONFIG_USB_DYNAMIC_MINORS=y > CONFIG_USB_SUSPEND=y > # CONFIG_USB_OTG is not set > # CONFIG_USB_DWC3 is not set > # CONFIG_USB_MON is not set > CONFIG_USB_WUSB=y > # CONFIG_USB_WUSB_CBAF is not set > > # > # USB Host Controller Drivers > # > # CONFIG_USB_C67X00_HCD is not set > # CONFIG_USB_XHCI_HCD is not set > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_ROOT_HUB_TT=y > # CONFIG_USB_EHCI_TT_NEWSCHED is not set > # CONFIG_USB_OXU210HP_HCD is not set > # CONFIG_USB_ISP116X_HCD is not set > # CONFIG_USB_ISP1760_HCD is not set > # CONFIG_USB_ISP1362_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_HCD_SSB is not set > # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set > # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_UHCI_HCD=y > # CONFIG_USB_SL811_HCD is not set > CONFIG_USB_R8A66597_HCD=y > # CONFIG_USB_WHCI_HCD is not set > # CONFIG_USB_HWA_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > # CONFIG_USB_WDM is not set > # CONFIG_USB_TMC is not set > > # > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may > # > > # > # also be needed; see USB_STORAGE Help for more info > # > # CONFIG_USB_STORAGE is not set > # CONFIG_USB_UAS is not set > # CONFIG_USB_LIBUSUAL is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB port drivers > # > # CONFIG_USB_USS720 is not set > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_ADUTUX is not set > # CONFIG_USB_SEVSEG is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYPRESS_CY7C63 is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_FTDI_ELAN is not set > # CONFIG_USB_APPLEDISPLAY is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > # CONFIG_USB_IOWARRIOR is not set > # CONFIG_USB_TEST is not set > # CONFIG_USB_ISIGHTFW is not set > # CONFIG_USB_YUREX is not set > # CONFIG_USB_GADGET is not set > > # > # OTG and related infrastructure > # > # CONFIG_USB_GPIO_VBUS is not set > # CONFIG_NOP_USB_XCEIV is not set > CONFIG_UWB=y > CONFIG_UWB_HWA=y > CONFIG_UWB_WHCI=m > # CONFIG_UWB_I1480U is not set > # CONFIG_MMC is not set > # CONFIG_MEMSTICK is not set > CONFIG_NEW_LEDS=y > CONFIG_LEDS_CLASS=y > > # > # LED drivers > # > # CONFIG_LEDS_LM3530 is not set > # CONFIG_LEDS_PCA9532 is not set > # CONFIG_LEDS_GPIO is not set > # CONFIG_LEDS_LP3944 is not set > # CONFIG_LEDS_LP5521 is not set > # CONFIG_LEDS_LP5523 is not set > # CONFIG_LEDS_CLEVO_MAIL is not set > # CONFIG_LEDS_PCA955X is not set > # CONFIG_LEDS_BD2802 is not set > # CONFIG_LEDS_INTEL_SS4200 is not set > # CONFIG_LEDS_LT3593 is not set > CONFIG_LEDS_DELL_NETBOOKS=m > CONFIG_LEDS_TRIGGERS=y > > # > # LED Triggers > # > # CONFIG_LEDS_TRIGGER_TIMER is not set > # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set > # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set > # CONFIG_LEDS_TRIGGER_GPIO is not set > # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set > > # > # iptables trigger is under Netfilter config (LED target) > # > # CONFIG_ACCESSIBILITY is not set > # CONFIG_INFINIBAND is not set > # CONFIG_EDAC is not set > CONFIG_RTC_LIB=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_HCTOSYS=y > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > # CONFIG_RTC_DEBUG is not set > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=y > CONFIG_RTC_INTF_PROC=y > CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > # CONFIG_RTC_DRV_TEST is not set > > # > # I2C RTC drivers > # > CONFIG_RTC_DRV_DS1307=m > CONFIG_RTC_DRV_DS1374=m > CONFIG_RTC_DRV_DS1672=m > # CONFIG_RTC_DRV_DS3232 is not set > CONFIG_RTC_DRV_MAX6900=m > CONFIG_RTC_DRV_RS5C372=m > CONFIG_RTC_DRV_ISL1208=m > # CONFIG_RTC_DRV_ISL12022 is not set > CONFIG_RTC_DRV_X1205=m > CONFIG_RTC_DRV_PCF8563=m > CONFIG_RTC_DRV_PCF8583=m > CONFIG_RTC_DRV_M41T80=m > # CONFIG_RTC_DRV_M41T80_WDT is not set > # CONFIG_RTC_DRV_BQ32K is not set > CONFIG_RTC_DRV_S35390A=m > CONFIG_RTC_DRV_FM3130=m > CONFIG_RTC_DRV_RX8581=m > CONFIG_RTC_DRV_RX8025=m > # CONFIG_RTC_DRV_EM3027 is not set > # CONFIG_RTC_DRV_RV3029C2 is not set > > # > # SPI RTC drivers > # > > # > # Platform RTC drivers > # > CONFIG_RTC_DRV_CMOS=y > CONFIG_RTC_DRV_DS1286=m > CONFIG_RTC_DRV_DS1511=m > CONFIG_RTC_DRV_DS1553=m > CONFIG_RTC_DRV_DS1742=m > CONFIG_RTC_DRV_STK17TA8=m > CONFIG_RTC_DRV_M48T86=m > CONFIG_RTC_DRV_M48T35=m > CONFIG_RTC_DRV_M48T59=m > # CONFIG_RTC_DRV_MSM6242 is not set > CONFIG_RTC_DRV_BQ4802=m > # CONFIG_RTC_DRV_RP5C01 is not set > CONFIG_RTC_DRV_V3020=m > > # > # on-CPU RTC drivers > # > CONFIG_DMADEVICES=y > # CONFIG_DMADEVICES_DEBUG is not set > > # > # DMA Devices > # > # CONFIG_INTEL_MID_DMAC is not set > CONFIG_INTEL_IOATDMA=m > # CONFIG_TIMB_DMA is not set > # CONFIG_PCH_DMA is not set > CONFIG_DMA_ENGINE=y > > # > # DMA Clients > # > CONFIG_NET_DMA=y > CONFIG_ASYNC_TX_DMA=y > # CONFIG_DMATEST is not set > CONFIG_DCA=m > # CONFIG_AUXDISPLAY is not set > CONFIG_UIO=m > CONFIG_UIO_CIF=m > # CONFIG_UIO_PDRV is not set > # CONFIG_UIO_PDRV_GENIRQ is not set > # CONFIG_UIO_AEC is not set > # CONFIG_UIO_SERCOS3 is not set > # CONFIG_UIO_PCI_GENERIC is not set > # CONFIG_UIO_NETX is not set > > # > # Virtio drivers > # > # CONFIG_VIRTIO_PCI is not set > # CONFIG_VIRTIO_BALLOON is not set > # CONFIG_VIRTIO_MMIO is not set > > # > # Xen driver support > # > CONFIG_XEN_BALLOON=y > CONFIG_XEN_SCRUB_PAGES=y > CONFIG_XEN_DEV_EVTCHN=y > CONFIG_XEN_BACKEND=y > CONFIG_XENFS=y > CONFIG_XEN_COMPAT_XENFS=y > CONFIG_XEN_SYS_HYPERVISOR=y > CONFIG_XEN_XENBUS_FRONTEND=y > CONFIG_XEN_GNTDEV=y > CONFIG_XEN_GRANT_DEV_ALLOC=y > CONFIG_SWIOTLB_XEN=y > CONFIG_XEN_PCIDEV_BACKEND=y > # CONFIG_STAGING is not set > CONFIG_X86_PLATFORM_DEVICES=y > # CONFIG_ACER_WMI is not set > # CONFIG_ACERHDF is not set > # CONFIG_ASUS_LAPTOP is not set > # CONFIG_DELL_LAPTOP is not set > CONFIG_DELL_WMI=m > CONFIG_DELL_WMI_AIO=m > # CONFIG_FUJITSU_LAPTOP is not set > # CONFIG_TC1100_WMI is not set > # CONFIG_HP_ACCEL is not set > # CONFIG_HP_WMI is not set > # CONFIG_PANASONIC_LAPTOP is not set > # CONFIG_THINKPAD_ACPI is not set > # CONFIG_SENSORS_HDAPS is not set > # CONFIG_INTEL_MENLOW is not set > # CONFIG_EEEPC_LAPTOP is not set > # CONFIG_ASUS_WMI is not set > CONFIG_ACPI_WMI=m > # CONFIG_MSI_WMI is not set > # CONFIG_ACPI_ASUS is not set > # CONFIG_TOPSTAR_LAPTOP is not set > # CONFIG_ACPI_TOSHIBA is not set > # CONFIG_TOSHIBA_BT_RFKILL is not set > # CONFIG_ACPI_CMPC is not set > # CONFIG_INTEL_IPS is not set > # CONFIG_IBM_RTL is not set > # CONFIG_XO15_EBOOK is not set > CONFIG_MXM_WMI=m > # CONFIG_SAMSUNG_Q10 is not set > > # > # Hardware Spinlock drivers > # > CONFIG_CLKSRC_I8253=y > CONFIG_CLKEVT_I8253=y > CONFIG_I8253_LOCK=y > CONFIG_CLKBLD_I8253=y > CONFIG_IOMMU_SUPPORT=y > # CONFIG_INTEL_IOMMU is not set > # CONFIG_VIRT_DRIVERS is not set > # CONFIG_HYPERV is not set > # CONFIG_PM_DEVFREQ is not set > > # > # Firmware Drivers > # > # CONFIG_EDD is not set > CONFIG_FIRMWARE_MEMMAP=y > CONFIG_DELL_RBU=y > CONFIG_DCDBAS=y > CONFIG_DMIID=y > # CONFIG_DMI_SYSFS is not set > # CONFIG_ISCSI_IBFT_FIND is not set > # CONFIG_SIGMA is not set > # CONFIG_GOOGLE_FIRMWARE is not set > > # > # File systems > # > CONFIG_EXT2_FS=m > CONFIG_EXT2_FS_XATTR=y > CONFIG_EXT2_FS_POSIX_ACL=y > CONFIG_EXT2_FS_SECURITY=y > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_DEFAULTS_TO_ORDERED=y > CONFIG_EXT3_FS_XATTR=y > CONFIG_EXT3_FS_POSIX_ACL=y > CONFIG_EXT3_FS_SECURITY=y > CONFIG_EXT4_FS=m > CONFIG_EXT4_FS_XATTR=y > CONFIG_EXT4_FS_POSIX_ACL=y > CONFIG_EXT4_FS_SECURITY=y > CONFIG_EXT4_DEBUG=y > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_JBD2=m > # CONFIG_JBD2_DEBUG is not set > CONFIG_FS_MBCACHE=y > CONFIG_REISERFS_FS=m > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > CONFIG_REISERFS_FS_XATTR=y > CONFIG_REISERFS_FS_POSIX_ACL=y > CONFIG_REISERFS_FS_SECURITY=y > CONFIG_JFS_FS=m > CONFIG_JFS_POSIX_ACL=y > CONFIG_JFS_SECURITY=y > # CONFIG_JFS_DEBUG is not set > # CONFIG_JFS_STATISTICS is not set > CONFIG_XFS_FS=m > CONFIG_XFS_QUOTA=y > CONFIG_XFS_POSIX_ACL=y > CONFIG_XFS_RT=y > # CONFIG_XFS_DEBUG is not set > CONFIG_GFS2_FS=m > CONFIG_GFS2_FS_LOCKING_DLM=y > # CONFIG_OCFS2_FS is not set > # CONFIG_BTRFS_FS is not set > CONFIG_NILFS2_FS=m > CONFIG_FS_POSIX_ACL=y > CONFIG_EXPORTFS=m > CONFIG_FILE_LOCKING=y > CONFIG_FSNOTIFY=y > CONFIG_DNOTIFY=y > CONFIG_INOTIFY_USER=y > # CONFIG_FANOTIFY is not set > CONFIG_QUOTA=y > CONFIG_QUOTA_NETLINK_INTERFACE=y > CONFIG_PRINT_QUOTA_WARNING=y > # CONFIG_QUOTA_DEBUG is not set > CONFIG_QUOTA_TREE=m > CONFIG_QFMT_V1=m > CONFIG_QFMT_V2=m > CONFIG_QUOTACTL=y > CONFIG_AUTOFS4_FS=y > CONFIG_FUSE_FS=m > CONFIG_CUSE=m > CONFIG_GENERIC_ACL=y > > # > # Caches > # > CONFIG_FSCACHE=m > CONFIG_FSCACHE_STATS=y > # CONFIG_FSCACHE_HISTOGRAM is not set > CONFIG_FSCACHE_DEBUG=y > # CONFIG_FSCACHE_OBJECT_LIST is not set > CONFIG_CACHEFILES=m > CONFIG_CACHEFILES_DEBUG=y > # CONFIG_CACHEFILES_HISTOGRAM is not set > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="utf8" > CONFIG_NTFS_FS=y > CONFIG_NTFS_DEBUG=y > CONFIG_NTFS_RW=y > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_PROC_SYSCTL=y > CONFIG_PROC_PAGE_MONITOR=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > CONFIG_TMPFS_POSIX_ACL=y > CONFIG_TMPFS_XATTR=y > # CONFIG_HUGETLBFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_CONFIGFS_FS=y > CONFIG_MISC_FILESYSTEMS=y > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_ECRYPT_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_JFFS2_FS is not set > # CONFIG_LOGFS is not set > # CONFIG_CRAMFS is not set > # CONFIG_SQUASHFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_OMFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_ROMFS_FS is not set > # CONFIG_PSTORE is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > # CONFIG_EXOFS_FS is not set > CONFIG_NETWORK_FILESYSTEMS=y > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > CONFIG_NFS_V3_ACL=y > CONFIG_NFS_V4=y > # CONFIG_NFS_V4_1 is not set > # CONFIG_NFS_USE_LEGACY_DNS is not set > CONFIG_NFS_USE_KERNEL_DNS=y > # CONFIG_NFS_USE_NEW_IDMAPPER is not set > CONFIG_NFSD=m > CONFIG_NFSD_V2_ACL=y > CONFIG_NFSD_V3=y > CONFIG_NFSD_V3_ACL=y > CONFIG_NFSD_V4=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_NFS_ACL_SUPPORT=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > CONFIG_SUNRPC_GSS=y > # CONFIG_RPCSEC_GSS_KRB5 is not set > # CONFIG_CEPH_FS is not set > CONFIG_CIFS=y > # CONFIG_CIFS_STATS is not set > CONFIG_CIFS_WEAK_PW_HASH=y > CONFIG_CIFS_UPCALL=y > CONFIG_CIFS_XATTR=y > CONFIG_CIFS_POSIX=y > # CONFIG_CIFS_DEBUG2 is not set > CONFIG_CIFS_DFS_UPCALL=y > # CONFIG_CIFS_ACL is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > > # > # Partition Types > # > CONFIG_PARTITION_ADVANCED=y > CONFIG_ACORN_PARTITION=y > # CONFIG_ACORN_PARTITION_CUMANA is not set > # CONFIG_ACORN_PARTITION_EESOX is not set > CONFIG_ACORN_PARTITION_ICS=y > # CONFIG_ACORN_PARTITION_ADFS is not set > # CONFIG_ACORN_PARTITION_POWERTEC is not set > CONFIG_ACORN_PARTITION_RISCIX=y > CONFIG_OSF_PARTITION=y > CONFIG_AMIGA_PARTITION=y > CONFIG_ATARI_PARTITION=y > CONFIG_MAC_PARTITION=y > CONFIG_MSDOS_PARTITION=y > CONFIG_BSD_DISKLABEL=y > CONFIG_MINIX_SUBPARTITION=y > CONFIG_SOLARIS_X86_PARTITION=y > CONFIG_UNIXWARE_DISKLABEL=y > CONFIG_LDM_PARTITION=y > # CONFIG_LDM_DEBUG is not set > CONFIG_SGI_PARTITION=y > CONFIG_ULTRIX_PARTITION=y > CONFIG_SUN_PARTITION=y > CONFIG_KARMA_PARTITION=y > # CONFIG_EFI_PARTITION is not set > # CONFIG_SYSV68_PARTITION is not set > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="utf8" > CONFIG_NLS_CODEPAGE_437=y > CONFIG_NLS_CODEPAGE_737=y > CONFIG_NLS_CODEPAGE_775=y > CONFIG_NLS_CODEPAGE_850=y > CONFIG_NLS_CODEPAGE_852=y > CONFIG_NLS_CODEPAGE_855=y > CONFIG_NLS_CODEPAGE_857=y > CONFIG_NLS_CODEPAGE_860=y > CONFIG_NLS_CODEPAGE_861=y > CONFIG_NLS_CODEPAGE_862=y > CONFIG_NLS_CODEPAGE_863=y > CONFIG_NLS_CODEPAGE_864=y > CONFIG_NLS_CODEPAGE_865=y > CONFIG_NLS_CODEPAGE_866=y > CONFIG_NLS_CODEPAGE_869=y > CONFIG_NLS_CODEPAGE_936=y > CONFIG_NLS_CODEPAGE_950=y > CONFIG_NLS_CODEPAGE_932=y > CONFIG_NLS_CODEPAGE_949=y > CONFIG_NLS_CODEPAGE_874=y > CONFIG_NLS_ISO8859_8=y > CONFIG_NLS_CODEPAGE_1250=y > CONFIG_NLS_CODEPAGE_1251=y > CONFIG_NLS_ASCII=y > CONFIG_NLS_ISO8859_1=y > CONFIG_NLS_ISO8859_2=y > CONFIG_NLS_ISO8859_3=y > CONFIG_NLS_ISO8859_4=y > CONFIG_NLS_ISO8859_5=y > CONFIG_NLS_ISO8859_6=y > CONFIG_NLS_ISO8859_7=y > CONFIG_NLS_ISO8859_9=y > CONFIG_NLS_ISO8859_13=y > CONFIG_NLS_ISO8859_14=y > CONFIG_NLS_ISO8859_15=y > CONFIG_NLS_KOI8_R=y > CONFIG_NLS_KOI8_U=y > CONFIG_NLS_UTF8=y > CONFIG_DLM=m > CONFIG_DLM_DEBUG=y > > # > # Kernel hacking > # > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > CONFIG_PRINTK_TIME=y > CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 > # CONFIG_ENABLE_WARN_DEPRECATED is not set > CONFIG_ENABLE_MUST_CHECK=y > CONFIG_FRAME_WARN=1024 > CONFIG_MAGIC_SYSRQ=y > CONFIG_STRIP_ASM_SYMS=y > CONFIG_UNUSED_SYMBOLS=y > CONFIG_DEBUG_FS=y > CONFIG_HEADERS_CHECK=y > CONFIG_DEBUG_SECTION_MISMATCH=y > CONFIG_DEBUG_KERNEL=y > CONFIG_DEBUG_SHIRQ=y > CONFIG_LOCKUP_DETECTOR=y > CONFIG_HARDLOCKUP_DETECTOR=y > # CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set > CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 > # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set > CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 > CONFIG_DETECT_HUNG_TASK=y > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 > # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set > CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 > CONFIG_SCHED_DEBUG=y > # CONFIG_SCHEDSTATS is not set > CONFIG_TIMER_STATS=y > # CONFIG_DEBUG_OBJECTS is not set > # CONFIG_SLUB_DEBUG_ON is not set > # CONFIG_SLUB_STATS is not set > # CONFIG_DEBUG_KMEMLEAK is not set > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_RT_MUTEX_TESTER is not set > # CONFIG_DEBUG_SPINLOCK is not set > CONFIG_DEBUG_MUTEXES=y > # CONFIG_DEBUG_LOCK_ALLOC is not set > # CONFIG_PROVE_LOCKING is not set > # CONFIG_SPARSE_RCU_POINTER is not set > # CONFIG_LOCK_STAT is not set > # CONFIG_DEBUG_ATOMIC_SLEEP is not set > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > CONFIG_STACKTRACE=y > # CONFIG_DEBUG_STACK_USAGE is not set > # CONFIG_DEBUG_KOBJECT is not set > CONFIG_DEBUG_HIGHMEM=y > CONFIG_DEBUG_BUGVERBOSE=y > CONFIG_DEBUG_INFO=y > # CONFIG_DEBUG_INFO_REDUCED is not set > # CONFIG_DEBUG_VM is not set > # CONFIG_DEBUG_VIRTUAL is not set > # CONFIG_DEBUG_WRITECOUNT is not set > CONFIG_DEBUG_MEMORY_INIT=y > # CONFIG_DEBUG_LIST is not set > # CONFIG_TEST_LIST_SORT is not set > # CONFIG_DEBUG_SG is not set > # CONFIG_DEBUG_NOTIFIERS is not set > # CONFIG_DEBUG_CREDENTIALS is not set > CONFIG_ARCH_WANT_FRAME_POINTERS=y > # CONFIG_FRAME_POINTER is not set > # CONFIG_BOOT_PRINTK_DELAY is not set > # CONFIG_RCU_TORTURE_TEST is not set > CONFIG_RCU_CPU_STALL_TIMEOUT=60 > # CONFIG_BACKTRACE_SELF_TEST is not set > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set > # CONFIG_DEBUG_PER_CPU_MAPS is not set > # CONFIG_LKDTM is not set > # CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set > # CONFIG_FAULT_INJECTION is not set > # CONFIG_LATENCYTOP is not set > CONFIG_SYSCTL_SYSCALL_CHECK=y > # CONFIG_DEBUG_PAGEALLOC is not set > CONFIG_USER_STACKTRACE_SUPPORT=y > CONFIG_NOP_TRACER=y > CONFIG_HAVE_FUNCTION_TRACER=y > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y > CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y > CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y > CONFIG_HAVE_DYNAMIC_FTRACE=y > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y > CONFIG_HAVE_C_RECORDMCOUNT=y > CONFIG_RING_BUFFER=y > CONFIG_EVENT_TRACING=y > CONFIG_EVENT_POWER_TRACING_DEPRECATED=y > CONFIG_CONTEXT_SWITCH_TRACER=y > CONFIG_TRACING=y > CONFIG_GENERIC_TRACER=y > CONFIG_TRACING_SUPPORT=y > CONFIG_FTRACE=y > # CONFIG_FUNCTION_TRACER is not set > # CONFIG_IRQSOFF_TRACER is not set > # CONFIG_SCHED_TRACER is not set > # CONFIG_FTRACE_SYSCALLS is not set > CONFIG_BRANCH_PROFILE_NONE=y > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set > # CONFIG_PROFILE_ALL_BRANCHES is not set > # CONFIG_STACK_TRACER is not set > CONFIG_BLK_DEV_IO_TRACE=y > # CONFIG_FTRACE_STARTUP_TEST is not set > # CONFIG_MMIOTRACE is not set > # CONFIG_RING_BUFFER_BENCHMARK is not set > # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set > # CONFIG_BUILD_DOCSRC is not set > # CONFIG_DYNAMIC_DEBUG is not set > # CONFIG_DMA_API_DEBUG is not set > # CONFIG_ATOMIC64_SELFTEST is not set > # CONFIG_SAMPLES is not set > CONFIG_HAVE_ARCH_KGDB=y > CONFIG_KGDB=y > CONFIG_KGDB_SERIAL_CONSOLE=y > # CONFIG_KGDB_TESTS is not set > CONFIG_KGDB_LOW_LEVEL_TRAP=y > # CONFIG_KGDB_KDB is not set > CONFIG_HAVE_ARCH_KMEMCHECK=y > # CONFIG_TEST_KSTRTOX is not set > CONFIG_STRICT_DEVMEM=y > CONFIG_X86_VERBOSE_BOOTUP=y > CONFIG_EARLY_PRINTK=y > # CONFIG_EARLY_PRINTK_DBGP is not set > # CONFIG_DEBUG_STACKOVERFLOW is not set > # CONFIG_X86_PTDUMP is not set > CONFIG_DEBUG_RODATA=y > # CONFIG_DEBUG_RODATA_TEST is not set > # CONFIG_DEBUG_SET_MODULE_RONX is not set > # CONFIG_DEBUG_NX_TEST is not set > CONFIG_DOUBLEFAULT=y > # CONFIG_IOMMU_STRESS is not set > CONFIG_HAVE_MMIOTRACE_SUPPORT=y > CONFIG_IO_DELAY_TYPE_0X80=0 > CONFIG_IO_DELAY_TYPE_0XED=1 > CONFIG_IO_DELAY_TYPE_UDELAY=2 > CONFIG_IO_DELAY_TYPE_NONE=3 > CONFIG_IO_DELAY_0X80=y > # CONFIG_IO_DELAY_0XED is not set > # CONFIG_IO_DELAY_UDELAY is not set > # CONFIG_IO_DELAY_NONE is not set > CONFIG_DEFAULT_IO_DELAY_TYPE=0 > CONFIG_DEBUG_BOOT_PARAMS=y > # CONFIG_CPA_DEBUG is not set > CONFIG_OPTIMIZE_INLINING=y > # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set > > # > # Security options > # > CONFIG_KEYS=y > # CONFIG_ENCRYPTED_KEYS is not set > # CONFIG_KEYS_DEBUG_PROC_KEYS is not set > # CONFIG_SECURITY_DMESG_RESTRICT is not set > # CONFIG_SECURITY is not set > # CONFIG_SECURITYFS is not set > CONFIG_DEFAULT_SECURITY_DAC=y > CONFIG_DEFAULT_SECURITY="" > CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y > CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y > CONFIG_CRYPTO=y > > # > # Crypto core or helper > # > CONFIG_CRYPTO_ALGAPI=y > CONFIG_CRYPTO_ALGAPI2=y > CONFIG_CRYPTO_AEAD=m > CONFIG_CRYPTO_AEAD2=y > CONFIG_CRYPTO_BLKCIPHER=y > CONFIG_CRYPTO_BLKCIPHER2=y > CONFIG_CRYPTO_HASH=y > CONFIG_CRYPTO_HASH2=y > CONFIG_CRYPTO_RNG=y > CONFIG_CRYPTO_RNG2=y > CONFIG_CRYPTO_PCOMP=y > CONFIG_CRYPTO_PCOMP2=y > CONFIG_CRYPTO_MANAGER=y > CONFIG_CRYPTO_MANAGER2=y > # CONFIG_CRYPTO_USER is not set > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y > CONFIG_CRYPTO_GF128MUL=m > CONFIG_CRYPTO_NULL=m > # CONFIG_CRYPTO_PCRYPT is not set > CONFIG_CRYPTO_WORKQUEUE=y > # CONFIG_CRYPTO_CRYPTD is not set > CONFIG_CRYPTO_AUTHENC=m > CONFIG_CRYPTO_TEST=m > > # > # Authenticated Encryption with Associated Data > # > CONFIG_CRYPTO_CCM=m > CONFIG_CRYPTO_GCM=m > CONFIG_CRYPTO_SEQIV=m > > # > # Block modes > # > CONFIG_CRYPTO_CBC=y > CONFIG_CRYPTO_CTR=m > CONFIG_CRYPTO_CTS=m > CONFIG_CRYPTO_ECB=y > CONFIG_CRYPTO_LRW=m > CONFIG_CRYPTO_PCBC=m > CONFIG_CRYPTO_XTS=m > > # > # Hash modes > # > CONFIG_CRYPTO_HMAC=y > CONFIG_CRYPTO_XCBC=m > CONFIG_CRYPTO_VMAC=m > > # > # Digest > # > CONFIG_CRYPTO_CRC32C=y > CONFIG_CRYPTO_CRC32C_INTEL=m > CONFIG_CRYPTO_GHASH=m > CONFIG_CRYPTO_MD4=y > CONFIG_CRYPTO_MD5=y > CONFIG_CRYPTO_MICHAEL_MIC=y > CONFIG_CRYPTO_RMD128=m > CONFIG_CRYPTO_RMD160=m > CONFIG_CRYPTO_RMD256=y > CONFIG_CRYPTO_RMD320=y > CONFIG_CRYPTO_SHA1=y > CONFIG_CRYPTO_SHA256=y > CONFIG_CRYPTO_SHA512=y > CONFIG_CRYPTO_TGR192=y > CONFIG_CRYPTO_WP512=y > > # > # Ciphers > # > CONFIG_CRYPTO_AES=y > CONFIG_CRYPTO_AES_586=y > # CONFIG_CRYPTO_AES_NI_INTEL is not set > CONFIG_CRYPTO_ANUBIS=y > CONFIG_CRYPTO_ARC4=y > CONFIG_CRYPTO_BLOWFISH=y > CONFIG_CRYPTO_BLOWFISH_COMMON=y > CONFIG_CRYPTO_CAMELLIA=y > CONFIG_CRYPTO_CAST5=y > CONFIG_CRYPTO_CAST6=m > CONFIG_CRYPTO_DES=y > CONFIG_CRYPTO_FCRYPT=y > CONFIG_CRYPTO_KHAZAD=y > CONFIG_CRYPTO_SALSA20=y > CONFIG_CRYPTO_SALSA20_586=y > CONFIG_CRYPTO_SEED=y > CONFIG_CRYPTO_SERPENT=y > CONFIG_CRYPTO_TEA=y > CONFIG_CRYPTO_TWOFISH=y > CONFIG_CRYPTO_TWOFISH_COMMON=y > CONFIG_CRYPTO_TWOFISH_586=y > > # > # Compression > # > CONFIG_CRYPTO_DEFLATE=y > CONFIG_CRYPTO_ZLIB=y > CONFIG_CRYPTO_LZO=y > > # > # Random Number Generation > # > CONFIG_CRYPTO_ANSI_CPRNG=y > # CONFIG_CRYPTO_USER_API_HASH is not set > # CONFIG_CRYPTO_USER_API_SKCIPHER is not set > # CONFIG_CRYPTO_HW is not set > CONFIG_HAVE_KVM=y > CONFIG_VIRTUALIZATION=y > # CONFIG_KVM is not set > # CONFIG_VHOST_NET is not set > # CONFIG_LGUEST is not set > CONFIG_BINARY_PRINTF=y > > # > # Library routines > # > CONFIG_BITREVERSE=y > CONFIG_GENERIC_FIND_FIRST_BIT=y > CONFIG_CRC_CCITT=y > CONFIG_CRC16=y > CONFIG_CRC_T10DIF=y > CONFIG_CRC_ITU_T=y > CONFIG_CRC32=y > CONFIG_CRC7=y > CONFIG_LIBCRC32C=y > # CONFIG_CRC8 is not set > CONFIG_AUDIT_GENERIC=y > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=y > CONFIG_LZO_COMPRESS=y > CONFIG_LZO_DECOMPRESS=y > CONFIG_XZ_DEC=y > CONFIG_XZ_DEC_X86=y > CONFIG_XZ_DEC_POWERPC=y > CONFIG_XZ_DEC_IA64=y > CONFIG_XZ_DEC_ARM=y > CONFIG_XZ_DEC_ARMTHUMB=y > CONFIG_XZ_DEC_SPARC=y > CONFIG_XZ_DEC_BCJ=y > # CONFIG_XZ_DEC_TEST is not set > CONFIG_DECOMPRESS_GZIP=y > CONFIG_DECOMPRESS_BZIP2=y > CONFIG_DECOMPRESS_LZMA=y > CONFIG_DECOMPRESS_XZ=y > CONFIG_DECOMPRESS_LZO=y > CONFIG_HAS_IOMEM=y > CONFIG_HAS_IOPORT=y > CONFIG_HAS_DMA=y > CONFIG_CHECK_SIGNATURE=y > CONFIG_CPU_RMAP=y > CONFIG_NLATTR=y > CONFIG_LRU_CACHE=m > CONFIG_AVERAGE=y > # CONFIG_CORDIC is not set> _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel
Any luck with this one? :) Goncalo On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote:> On Tue, Mar 13, 2012 at 10:34:38PM +0000, Goncalo Gomes wrote: > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > On Tue, Mar 13, 2012 at 07:09:17PM +0000, Goncalo Gomes wrote: > > > > On Tue, 13 Mar 2012, Goncalo Gomes wrote: > > > > > > > > > On Tue, 13 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > > > > > > > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > > > > > [ 0.000000] ------------[ cut here ]------------ > > > > > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > > > > > [ 0.000000] Hardware name: PowerEdge R310 > > > > > > > [ 0.000000] Modules linked in: > > > > > > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > > > > > > [ 0.000000] Call Trace: > > > > > > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > > > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > > > > > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > > > > > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > > > > > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > > > > > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > > > > > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > > > > > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > > > > > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > > > > > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > > > > > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > > > > > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > > > > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > > > > > > > > > > > So this is first time I am seeing this. It looks like something in 3.2 -> 3.2.9 > > > > > > is causing this. Can you do one more check - and just try booting the 3.2 virgin > > > > > > and seeing how it works? > > > > > > > > > > Sure, I''ll try it once I have a chance. > > > > > > > > With 3.2.0 + 4.1.2, all it took was booting domain0 > > > > > > I am really perplexed. I just booted 4.1.2 + 3.2.9 and 3.2.0 and I had no trouble. > > > Can you send me your .config file please? > > > > I can, see the attached config file1 > > > > > Oh wait, I am building 64-bit, you are doing 32-bit. Is your hypervisor 32-bit or > > > 64-bit? > > > > It is 32bit, as is the remaining setup. Is this not a valid > > configuration? > > > > Goncalo > > Dave, > > Did you see something similar with the PV hugepages? This is upstream kernel > without the PV hugepages, but I wonder if this is due to some CONFIG_ option > being turned on in the 32-bit build?? > > > > > > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > > > > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > > > > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > > > > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > > > > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > > > > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > > > > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > > > > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > > > > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > > > [ 0.000000] [<c167652c>] ? start_kernel+0x81/0x34d > > > > [ 0.000000] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da2b ]--- > > > > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > > > > [ 0.000000] ------------[ cut here ]------------ > > > > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > > > > [ 0.000000] Hardware name: PowerEdge R310 > > > > [ 0.000000] Modules linked in: > > > > [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.0 #1 > > > > [ 0.000000] Call Trace: > > > > [ 0.000000] [<c10421fb>] ? warn_slowpath_common+0x6a/0x7b > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > [ 0.000000] [<c1042219>] ? warn_slowpath_null+0xd/0x10 > > > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > > > [ 0.000000] [<c102ec56>] ? set_pmd_pfn+0xde/0xf9 > > > > [ 0.000000] [<c16895c1>] ? init_alloc_remap+0x1b3/0x216 > > > > [ 0.000000] [<c16889b7>] ? setup_node_data+0x4c/0x22f > > > > [ 0.000000] [<c1689172>] ? T.744+0x290/0x2c2 > > > > [ 0.000000] [<c168921b>] ? T.743+0x77/0x1a1 > > > > [ 0.000000] [<c10251bc>] ? default_get_apic_id+0x14/0x33 > > > > [ 0.000000] [<c168935c>] ? initmem_init+0x5/0xb7 > > > > [ 0.000000] [<c167aef4>] ? setup_arch+0x5bf/0x694 > > > > [ 0.000000] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > > > [ 0.000000] [<c1[ 4.991674] Freeing initrd memory: 71600k freed > > > > [ 5.008319] audit: initializing netlink socket (disabled) > > > > [ 5.008597] type=2000 audit(1331664964.980:1): initialized > > > > [ 5.010609] highmem bounce pool size: 64 pages > > > > [ 5.016079] VFS: Disk quotas dquot_6.5.2 > > > > [ 5.016507] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > > > [ 5.018142] NTFS driver 2.1.30 [Flags: R/W DEBUG]. > > > > [ 5.018584] msgmni has been set to 1133 > > > > [ 5.022247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > > > > [ 5.022706] io scheduler noop registered > > > > [ 5.022949] io scheduler deadline registered > > > > [ 5.023205] io scheduler cfq registered (default) > > > > (XEN) physdev.c:155: dom0: wrong map_pirq type 3 > > > > [ 5.025093] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt > > > > [ 5.025379] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > > > > [ 5.025689] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt > > > > [ 5.025941] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt > > > > [ 5.026253] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt > > > > [ 5.026528] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > > > > [ 5.026784] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt > > > > [ 5.027357] isapnp: Scanning for PnP cards... > > > > [ 5.381669] isapnp: No Plug & Play device found > > > > [ 5.382025] Event-channel device installed. > > > > [ 5.382518] xen-pciback: backend is vpci > > > > [ 5.383566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 4 to guest. In use by ''ns16550''. > > > > (XEN) irq.c:1200:d0 Cannot bind IRQ 2 to guest. In use by ''cascade''. > > > > [ 5.723699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > > > [ 5.972246] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > > > [ 6.783904] hpet_acpi_add: no address or irqs in _CRS > > > > [ 6.784282] Non-volatile memory driver v1.3 > > > > [ 6.785060] telclk_interrup = 0xf non-mcpbl0010 hw. > > > > [ 6.785310] Linux agpgart interface v0.103 > > > > [ 6.787839] usbcore: registered new interface driver hwa-rc > > > > [ 6.788090] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver > > > > [ 6.788425] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > > > [ 6.788703] ehci_hcd 0000:00:1a.0: EHCI Host Controller > > > > [ 6.788959] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > > > > [ 6.789475] ehci_hcd 0000:00:1a.0: debug port 2 > > > > [ 6.793696] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fc000 > > > > [ 6.807535] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > > > > [ 6.807838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > > > > [ 6.808090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > > > [ 6.808545] usb usb1: Product: EHCI Host Controller > > > > [ 6.808794] usb usb1: Manufacturer: Linux 3.2.0 ehci_hcd > > > > [ 6.809068] usb usb1: SerialNumber: 0000:00:1a.0 > > > > [ 6.809575] hub 1-0:1.0: USB hub found > > > > [ 6.809829] hub 1-0:1.0: 2 ports detected > > > > [ 6.810341] xen_map_pirq_gsi: returning irq 22 for gsi 22 > > > > [ 6.810598] Already setup the GSI :22 > > > > [ 6.810844] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > > > [ 6.811123] ehci_hcd 0000:00:1d.0: EHCI Host Controller > > > > [ 6.811384] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > > > > [ 6.811918] ehci_hcd 0000:00:1d.0: debug port 2 > > > > [ 6.816066] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000 > > > > [ 6.831542] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > > > > [ 6.831853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > > > > [ 6.832103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > > > [ 6.832555] usb usb2: Product: EHCI Host Controller > > > > [ 6.832825] usb usb2: Manufacturer: Linux 3.2.0 ehci_hcd > > > > [ 6.833075] usb usb2: SerialNumber: 0000:00:1d.0 > > > > [ 6.833563] hub 2-0:1.0: USB hub found > > > > [ 6.833815] hub 2-0:1.0: 2 ports detected > > > > [ 6.834353] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver > > > > [ 6.834647] uhci_hcd: USB Universal Host Controller Interface driver > > > > [ 6.834950] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 > > > > [ 6.835373] i8042: PNP: No PS/2 controller found. Probing ports directly. > > > > [ 6.836527] i8042: No controller found > > > > [ 6.836869] mousedev: PS/2 mouse device common for all mice > > > > [ 6.837581] rtc_cmos 00:04: RTC can wake from S4 > > > > [ 6.838042] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > > > > [ 6.843434] rtc0: alarms up to one day, y3k, 242 bytes nvram > > > > [ 6.843793] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) > > > > [ 6.844260] wdt: Xen WatchDog Timer Driver v0.01 > > > > [ 6.844571] wdt: cannot register miscdev on minor=130 (-16) > > > > [ 6.844823] wdt: probe of wdt failed with error -16 > > > > [ 6.845072] SoftDog: cannot register miscdev on minor=130 (err=-16) > > > > [ 6.845460] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > > > > [ 6.846745] TCP cubic registered > > > > [ 6.847299] NET: Registered protocol family 10 > > > > [ 6.849386] Mobile IPv6 > > > > [ 6.849630] NET: Registered protocol family 17 > > > > [ 6.850535] sctp: Hash tables configured (established 65536 bind 65536) > > > > [ 6.851272] Registering the dns_resolver key type > > > > [ 6.851552] Using IPI No-Shortcut mode > > > > [ 6.852053] registered taskstats version 1 > > > > [ 6.853100] console [netcon0] enabled > > > > [ 6.853344] netconsole: network logging started > > > > [ 6.853690] rtc_cmos 00:04: setting system clock to 2012-03-13 18:56:06 UTC (1331664966) > > > > [ 6.854236] Initializing network drop monitor service > > > > [ 6.854866] Freeing unused kernel memory: 436k freed > > > > [ 6.856484] Write protecting the kernel text: 3912k > > > > [ 6.857532] Write protecting the kernel read-only data: 2456k > > > > [ 6.857798] NX-protecting the kernel data: 4280k > > > > Loading, please wait... > > > > [ 6.901109] udev[133]: starting version 164 > > > > [ 6.998543] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) > > > > [ 6.999083] xen_map_pirq_gsi: returning irq 16 for gsi 16 > > > > [ 6.999361] Already setup the GSI :16 > > > > [ 6.999625] bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > > [ 7.003132] SCSI subsystem initialized > > > > [ 7.008819] bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr 84:2b:2b:52:88:2a > > > > [ 7.009413] bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > > > > [ 7.009804] Fusion MPT base driver 3.04.20 > > > > [ 7.010100] Copyright (c) 1999-2008 LSI Corporation > > > > [ 7.013277] Fusion MPT SAS Host driver 3.04.20 > > > > [ 7.013638] xen_map_pirq_gsi: returning irq 16 for gsi 16 > > > > [ 7.013644] bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr 84:2b:2b:52:88:2b > > > > [ 7.014399] Already setup the GSI :16 > > > > [ 7.014663] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > > [ 7.015118] mptbase: ioc0: Initiating bringup > > > > [ 7.119559] usb 1-1: new high-speed USB device number 2 using ehci_hcd > > > > [ 7.252020] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > > > > [ 7.252296] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > > > [ 7.252977] hub 1-1:1.0: USB hub found > > > > [ 7.253415] hub 1-1:1.0: 6 ports detected > > > > [ 7.363572] usb 2-1: new high-speed USB device number 2 using ehci_hcd > > > > [ 7.495891] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > > > > [ 7.496186] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > > > [ 7.496834] hub 2-1:1.0: USB hub found > > > > [ 7.497307] hub 2-1:1.0: 8 ports detected > > > > [ 7.571612] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd > > > > [ 7.663901] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 > > > > [ 7.664200] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > > > [ 7.664957] hub 1-1.1:1.0: USB hub found > > > > [ 7.665380] hub 1-1.1:1.0: 4 ports detected > > > > [ 7.715557] ioc0: LSISAS1068E B3: Capabilities={Initiator} > > > > [ 24.278976] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 > > > > [ 24.316004] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 > > > > [ 24.328504] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HE253GJ 0001 PQ: 0 ANSI: 5 > > > > [ 24.343216] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) > > > > [ 24.456939] sd 0:0:0:0: [sda] Write Protect is off > > > > [ 24.468646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA > > > > [ 24.596708] sda: sda1 sda2 < sda5 > > > > > [ 24.708503] sd 0:0:0:0: [sda] Attached SCSI disk > > > > Begin: Loading essential drivers ... done. > > > > Begin: Running /scripts/init-premount ... done. > > > > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. > > > > Begin: Running /scripts/local-premount ... [ 25.000780] PM: Starting manual resume from disk > > > > done. > > > > [ 25.027113] kjournald starting. Commit interval 5 seconds > > > > [ 25.027187] EXT3-fs (sda1): mounted filesystem with ordered data mode > > > > Begin: Running /scripts/local-bottom ... done. > > > > done. > > > > Begin: Running /scripts/init-bottom ... done. > > > > > > > INIT: version 2.88 booting > > > > > > > Using makefile-style concurrent boot in runlevel S. > > > > Starting the hotplug events dispatcher: udevd[ 25.989886] udev[352]: starting version 164 > > > > . > > > > Synthesizing the initial hotplug events...done. > > > > Waiting for /dev to be fully populated...[ 26.364902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > > > > [ 26.365747] ACPI: Power Button [PWRF] > > > > done. > > > > Activating swap...[ 26.973701] Adding 6066172k swap on /dev/sda5. Priority:-1 extents:1 across:6066172k > > > > done. > > > > Checking root file system...fsck from util-linux-ng 2.17.2 > > > > /: clean, 429888/14884864 files, 4781808/59517952 blocks (check in 3 mounts) > > > > done. > > > > [ 27.107722] EXT3-fs (sda1): using internal journal > > > > Cleaning up ifupdown.... > > > > [ 27.238878] loop: module loaded > > > > Loading kernel modules...done. > > > > Setting up networking.... > > > > Activating lvm and md swap...done. > > > > Checking file systems...fsck from util-linux-ng 2.17.2 > > > > done. > > > > Mounting local filesystems...done. > > > > Activating swapfile swap...done. > > > > Cleaning up temporary files.... > > > > Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 > > > > Copyright 2004-2010 Internet Systems Consortium. > > > > All rights reserved. > > > > For info, please visit https://www.isc.org/software/dhcp/ > > > > > > > > [ 28.189095] bnx2 0000:02:00.0: eth0: using MSIX > > > > [ 28.189494] ADDRCONF(NETDEV_UP): eth0: link is not ready > > > > Listening on LPF/eth0/84:2b:2b:52:88:2a > > > > Sending on LPF/eth0/84:2b:2b:52:88:2a > > > > Sending on Socket/fallback > > > > Setting kernel variables ...done. > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 > > > > [ 31.403226] bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex > > > > [ 31.403909] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 > > > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 > > > > DHCPOFFER from 10.80.224.1 > > > > DHCPREQUEST on eth0 to 255.255.255.255 port 67 > > > > DHCPACK from 10.80.224.1 > > > > bound to 10.80.227.196 -- renewal in 20979 seconds. > > > > done. > > > > Starting portmap daemon.... > > > > Starting NFS common utilities: statd. > > > > Cleaning up temporary files.... > > > > Setting console screen modes and fonts. > > > > cannot (un)set powersave mode > > > > [9;30][14;30]Loading the saved-state of the serial devices... > > > > [ 74.067406] ttyS0: LSR safety check engaged! > > > > [ 74.069153] ttyS0: LSR safety check engaged! > > > > /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A > > > > /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A > > > > > > > INIT: Entering runlevel: 2 > > > > > > > Using makefile-style concurrent boot in runlevel 2. > > > > Starting portmap daemon...Already running.. > > > > Starting NFS common utilities: statd. > > > > Starting enhanced syslogd: rsyslogd. > > > > Enabling additional executable binary formats: binfmt-support. > > > > [ 74.660094] BUG: unable to handle kernel paging request at 000012b7 > > > > [ 74.660475] IP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 > > > > [ 74.660763] *pdpt = 0000000004d92001 *pde = 0000000000000000 > > > > [ 74.661083] Oops: 0000 [#1] SMP > > > > [ 74.661398] Modules linked in: binfmt_misc loop button processor thermal_sys hwmon sd_mod mptsas mptscsih mptbase scsi_transport_sas scsi_mod bnx2 [last unloaded: scsi_wait_scan] > > > > [ 74.662605] > > > > [ 74.662844] Pid: 0, comm: swapper/0 Tainted: G W 3.2.0 #1 Dell Inc. PowerEdge R310/05XKKK > > > > [ 74.663430] EIP: 0061:[<c1268fea>] EFLAGS: 00010202 CPU: 0 > > > > [ 74.663681] EIP is at is_xen_swiotlb_buffer+0x35/0x80 > > > > [ 74.663932] EAX: 0000006d EBX: ffffffff ECX: c1777000 EDX: ffffffff > > > > [ 74.664186] ESI: 00000000 EDI: 00000002 EBP: 00000000 ESP: e3c0fec4 > > > > [ 74.664463] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 > > > > [ 74.664709] Process swapper/0 (pid: 0, ti=e3c0e000 task=c163f060 task.ti=c1638000) > > > > [ 74.665162] Stack: > > > > [ 74.665405] 00000000 00000000 c1269074 ffffffff e3e2a860 00000092 c5760480 efa3a3e0 > > > > [ 74.666155] c1269137 c5b2dec0 c1269146 00000092 00000002 00000000 ed62c57c 00000092 > > > > [ 74.666882] 00000002 007d0000 e867d120 0000007c e3c02300 e3c0ff80 c10d5d1c 8080017c > > > > [ 74.667639] Call Trace: > > > > [ 74.667885] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > > > > [ 74.668141] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > > > > [ 74.668397] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > > > > [ 74.668687] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > > > > [ 74.668938] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > > > > [ 74.669189] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > > > > [ 74.669442] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > > > > [ 74.669697] [<c1047202>] ? irq_enter+0x49/0x49 > > > > [ 74.669978] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > > > > [ 74.670230] [<c1047202>] ? irq_enter+0x49/0x49 > > > > [ 74.670480] [<c10472aa>] ? __do_softirq+0xa8/0x168 > > > > [ 74.670732] [<c1047202>] ? irq_enter+0x49/0x49 > > > > [ 74.670982] <IRQ> > > > > [ 74.671291] [<c10470d8>] ? irq_exit+0x2f/0x91 > > > > [ 74.671545] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > > > > [ 74.671799] [<c13d0647>] ? xen_do_upcall+0x7/0xc > > > > [ 74.672051] [<c106007b>] ? update_wall_time+0x20c/0x3ef > > > > [ 74.672301] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > > > > [ 74.672555] [<c1006772>] ? xen_safe_halt+0xf/0x1b > > > > [ 74.672834] [<c10136da>] ? default_idle+0x65/0xb8 > > > > [ 74.673089] [<c100c220>] ? cpu_idle+0x61/0x7d > > > > [ 74.673347] [<c16767f5>] ? start_kernel+0x34a/0x34d > > > > [ 74.673600] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > > > [ 74.673850] Code: ff ff ff 89 c3 e8 cd e3 d9 ff 39 f0 b8 ff ff ff ff 0f 45 d8 89 d8 c1 e8 0e 0f be 80 e0 24 67 c1 85 c0 78 4d 8b 14 85 c0 24 67 c1 <8b> 82 b8 12 00 00 03 82 b0 12 00 00 39 c3 73 36 a1 e8 88 76 c1 > > > > [ 74.676839] EIP: [<c1268fea>] is_xen_swiotlb_buffer+0x35/0x80 SS:ESP 0069:e3c0fec4 > > > > [ 74.677360] CR2: 00000000000012b7 > > > > [ 74.677608] ---[ end trace 4eaa2a86a8e2da48 ]--- > > > > [ 74.677856] Kernel panic - not syncing: Fatal exception in interrupt > > > > [ 74.678108] Pid: 0, comm: swapper/0 Tainted: G D W 3.2.0 #1 > > > > [ 74.678391] Call Trace: > > > > [ 74.678639] [<c13cd2f6>] ? panic+0x4d/0x157 > > > > [ 74.678889] [<c100eeec>] ? oops_end+0xad/0xb8 > > > > [ 74.679140] [<c102a7c8>] ? bad_area_nosemaphore+0xa/0xc > > > > [ 74.679393] [<c102abd5>] ? do_page_fault+0x167/0x31a > > > > [ 74.679676] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > > > > [ 74.679931] [<c1029a28>] ? pvclock_clocksource_read+0xec/0x11e > > > > [ 74.680185] [<c100b842>] ? __spin_time_accum+0x26/0x36 > > > > [ 74.680440] [<c100ba73>] ? __xen_spin_lock+0xb4/0xc8 > > > > [ 74.680693] [<c100673c>] ? xen_force_evtchn_callback+0xc/0x10 > > > > [ 74.680977] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > > > > [ 74.681229] [<c13cfde6>] ? error_code+0x5a/0x60 > > > > [ 74.681481] [<c102aa6e>] ? vmalloc_sync_all+0xb6/0xb6 > > > > [ 74.681729] [<c1268fea>] ? is_xen_swiotlb_buffer+0x35/0x80 > > > > [ 74.681979] [<c1269074>] ? xen_swiotlb_sync_single+0x3f/0x7b > > > > [ 74.682232] [<c1269137>] ? xen_swiotlb_sync_single_for_device+0x13/0x13 > > > > [ 74.682519] [<c1269146>] ? xen_swiotlb_sync_single_for_cpu+0xf/0x13 > > > > [ 74.682775] [<ed62c57c>] ? bnx2_rx_int+0xf5/0x3de [bnx2] > > > > [ 74.683027] [<c10d5d1c>] ? __slab_free+0xcb/0x1da > > > > [ 74.683278] [<ed62c8b3>] ? bnx2_poll_work+0x4e/0x56 [bnx2] > > > > [ 74.683536] [<ed62c9a3>] ? bnx2_poll+0x5f/0xe7 [bnx2] > > > > [ 74.683816] [<c1047202>] ? irq_enter+0x49/0x49 > > > > [ 74.684067] [<c1307451>] ? net_rx_action+0xb8/0x1d6 > > > > [ 74.684317] [<c1047202>] ? irq_enter+0x49/0x49 > > > > [ 74.684569] [<c10472aa>] ? __do_softirq+0xa8/0x168 > > > > [ 74.684820] [<c1047202>] ? irq_enter+0x49/0x49 > > > > [ 74.685066] <IRQ> [<c10470d8>] ? irq_exit+0x2f/0x91 > > > > [ 74.685384] [<c12615a2>] ? xen_evtchn_do_upcall+0x1d/0x26 > > > > [ 74.685638] [<c13d0647>] ? xen_do_upcall+0x7/0xc > > > > [ 74.685888] [<c106007b>] ? update_wall_time+0x20c/0x3ef > > > > [ 74.691270] [<c10023a7>] ? hypercall_page+0x3a7/0x1000 > > > > [ 74.691522] [<c1006772>] ? xen_safe_halt+0xf/0x1b > > > > [ 74.691770] [<c10136da>] ? default_idle+0x65/0xb8 > > > > [ 74.692053] [<c100c220>] ? cpu_idle+0x61/0x7d > > > > [ 74.692304] [<c16767f5>] ? start_kernel+0x34a/0x34d > > > > [ 74.692557] [<c1678258>] ? xen_start_kernel+0x554/0x55b > > > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > > > > [disconnect] > > > > goncalog@eire:~$ xenuse -t dt29[Kexit > > > > > > > > Script done on Tue 13 Mar 2012 19:06:30 GMT > > > > > > # > > # Automatically generated file; DO NOT EDIT. > > # Linux/i386 3.2.9 Kernel Configuration > > # > > # CONFIG_64BIT is not set > > CONFIG_X86_32=y > > # CONFIG_X86_64 is not set > > CONFIG_X86=y > > CONFIG_INSTRUCTION_DECODER=y > > CONFIG_OUTPUT_FORMAT="elf32-i386" > > CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" > > CONFIG_GENERIC_CMOS_UPDATE=y > > CONFIG_CLOCKSOURCE_WATCHDOG=y > > CONFIG_GENERIC_CLOCKEVENTS=y > > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y > > CONFIG_LOCKDEP_SUPPORT=y > > CONFIG_STACKTRACE_SUPPORT=y > > CONFIG_HAVE_LATENCYTOP_SUPPORT=y > > CONFIG_MMU=y > > CONFIG_ZONE_DMA=y > > # CONFIG_NEED_DMA_MAP_STATE is not set > > CONFIG_NEED_SG_DMA_LENGTH=y > > CONFIG_GENERIC_ISA_DMA=y > > CONFIG_GENERIC_IOMAP=y > > CONFIG_GENERIC_BUG=y > > CONFIG_GENERIC_HWEIGHT=y > > CONFIG_GENERIC_GPIO=y > > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > > CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y > > CONFIG_GENERIC_CALIBRATE_DELAY=y > > # CONFIG_GENERIC_TIME_VSYSCALL is not set > > CONFIG_ARCH_HAS_CPU_RELAX=y > > CONFIG_ARCH_HAS_DEFAULT_IDLE=y > > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y > > CONFIG_HAVE_SETUP_PER_CPU_AREA=y > > CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y > > CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y > > CONFIG_ARCH_HIBERNATION_POSSIBLE=y > > CONFIG_ARCH_SUSPEND_POSSIBLE=y > > # CONFIG_ZONE_DMA32 is not set > > CONFIG_ARCH_POPULATES_NODE_MAP=y > > # CONFIG_AUDIT_ARCH is not set > > CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y > > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y > > CONFIG_X86_32_SMP=y > > CONFIG_X86_HT=y > > CONFIG_X86_32_LAZY_GS=y > > CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" > > CONFIG_KTIME_SCALAR=y > > CONFIG_ARCH_CPU_PROBE_RELEASE=y > > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > > CONFIG_HAVE_IRQ_WORK=y > > CONFIG_IRQ_WORK=y > > > > # > > # General setup > > # > > CONFIG_EXPERIMENTAL=y > > CONFIG_INIT_ENV_ARG_LIMIT=32 > > CONFIG_CROSS_COMPILE="" > > CONFIG_LOCALVERSION="" > > # CONFIG_LOCALVERSION_AUTO is not set > > CONFIG_HAVE_KERNEL_GZIP=y > > CONFIG_HAVE_KERNEL_BZIP2=y > > CONFIG_HAVE_KERNEL_LZMA=y > > CONFIG_HAVE_KERNEL_XZ=y > > CONFIG_HAVE_KERNEL_LZO=y > > CONFIG_KERNEL_GZIP=y > > # CONFIG_KERNEL_BZIP2 is not set > > # CONFIG_KERNEL_LZMA is not set > > # CONFIG_KERNEL_XZ is not set > > # CONFIG_KERNEL_LZO is not set > > CONFIG_DEFAULT_HOSTNAME="dt29" > > CONFIG_SWAP=y > > CONFIG_SYSVIPC=y > > CONFIG_SYSVIPC_SYSCTL=y > > CONFIG_POSIX_MQUEUE=y > > CONFIG_POSIX_MQUEUE_SYSCTL=y > > CONFIG_BSD_PROCESS_ACCT=y > > CONFIG_BSD_PROCESS_ACCT_V3=y > > # CONFIG_FHANDLE is not set > > CONFIG_TASKSTATS=y > > CONFIG_TASK_DELAY_ACCT=y > > CONFIG_TASK_XACCT=y > > CONFIG_TASK_IO_ACCOUNTING=y > > CONFIG_AUDIT=y > > CONFIG_AUDITSYSCALL=y > > CONFIG_AUDIT_WATCH=y > > CONFIG_AUDIT_TREE=y > > CONFIG_HAVE_GENERIC_HARDIRQS=y > > > > # > > # IRQ subsystem > > # > > CONFIG_GENERIC_HARDIRQS=y > > CONFIG_HAVE_SPARSE_IRQ=y > > CONFIG_GENERIC_IRQ_PROBE=y > > CONFIG_GENERIC_IRQ_SHOW=y > > CONFIG_GENERIC_PENDING_IRQ=y > > CONFIG_IRQ_FORCED_THREADING=y > > CONFIG_SPARSE_IRQ=y > > > > # > > # RCU Subsystem > > # > > CONFIG_TREE_RCU=y > > # CONFIG_PREEMPT_RCU is not set > > # CONFIG_RCU_TRACE is not set > > CONFIG_RCU_FANOUT=32 > > # CONFIG_RCU_FANOUT_EXACT is not set > > # CONFIG_RCU_FAST_NO_HZ is not set > > # CONFIG_TREE_RCU_TRACE is not set > > # CONFIG_IKCONFIG is not set > > CONFIG_LOG_BUF_SHIFT=17 > > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y > > CONFIG_CGROUPS=y > > # CONFIG_CGROUP_DEBUG is not set > > CONFIG_CGROUP_FREEZER=y > > CONFIG_CGROUP_DEVICE=y > > CONFIG_CPUSETS=y > > CONFIG_PROC_PID_CPUSET=y > > CONFIG_CGROUP_CPUACCT=y > > # CONFIG_RESOURCE_COUNTERS is not set > > # CONFIG_CGROUP_PERF is not set > > CONFIG_CGROUP_SCHED=y > > CONFIG_FAIR_GROUP_SCHED=y > > # CONFIG_CFS_BANDWIDTH is not set > > # CONFIG_RT_GROUP_SCHED is not set > > # CONFIG_BLK_CGROUP is not set > > CONFIG_NAMESPACES=y > > CONFIG_UTS_NS=y > > CONFIG_IPC_NS=y > > CONFIG_USER_NS=y > > CONFIG_PID_NS=y > > CONFIG_NET_NS=y > > # CONFIG_SCHED_AUTOGROUP is not set > > CONFIG_SYSFS_DEPRECATED=y > > # CONFIG_SYSFS_DEPRECATED_V2 is not set > > CONFIG_RELAY=y > > CONFIG_BLK_DEV_INITRD=y > > CONFIG_INITRAMFS_SOURCE="" > > CONFIG_RD_GZIP=y > > CONFIG_RD_BZIP2=y > > CONFIG_RD_LZMA=y > > CONFIG_RD_XZ=y > > CONFIG_RD_LZO=y > > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > > CONFIG_SYSCTL=y > > CONFIG_ANON_INODES=y > > # CONFIG_EXPERT is not set > > CONFIG_UID16=y > > # CONFIG_SYSCTL_SYSCALL is not set > > CONFIG_KALLSYMS=y > > CONFIG_KALLSYMS_ALL=y > > CONFIG_HOTPLUG=y > > CONFIG_PRINTK=y > > CONFIG_BUG=y > > CONFIG_ELF_CORE=y > > CONFIG_PCSPKR_PLATFORM=y > > CONFIG_HAVE_PCSPKR_PLATFORM=y > > CONFIG_BASE_FULL=y > > CONFIG_FUTEX=y > > CONFIG_EPOLL=y > > CONFIG_SIGNALFD=y > > CONFIG_TIMERFD=y > > CONFIG_EVENTFD=y > > CONFIG_SHMEM=y > > CONFIG_AIO=y > > # CONFIG_EMBEDDED is not set > > CONFIG_HAVE_PERF_EVENTS=y > > > > # > > # Kernel Performance Events And Counters > > # > > CONFIG_PERF_EVENTS=y > > # CONFIG_PERF_COUNTERS is not set > > # CONFIG_DEBUG_PERF_USE_VMALLOC is not set > > CONFIG_VM_EVENT_COUNTERS=y > > CONFIG_PCI_QUIRKS=y > > CONFIG_SLUB_DEBUG=y > > CONFIG_COMPAT_BRK=y > > # CONFIG_SLAB is not set > > CONFIG_SLUB=y > > # CONFIG_PROFILING is not set > > CONFIG_TRACEPOINTS=y > > CONFIG_HAVE_OPROFILE=y > > # CONFIG_KPROBES is not set > > # CONFIG_JUMP_LABEL is not set > > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y > > CONFIG_HAVE_IOREMAP_PROT=y > > CONFIG_HAVE_KPROBES=y > > CONFIG_HAVE_KRETPROBES=y > > CONFIG_HAVE_OPTPROBES=y > > CONFIG_HAVE_ARCH_TRACEHOOK=y > > CONFIG_HAVE_DMA_ATTRS=y > > CONFIG_USE_GENERIC_SMP_HELPERS=y > > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y > > CONFIG_HAVE_DMA_API_DEBUG=y > > CONFIG_HAVE_HW_BREAKPOINT=y > > CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y > > CONFIG_HAVE_USER_RETURN_NOTIFIER=y > > CONFIG_HAVE_PERF_EVENTS_NMI=y > > CONFIG_HAVE_ARCH_JUMP_LABEL=y > > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y > > > > # > > # GCOV-based kernel profiling > > # > > # CONFIG_GCOV_KERNEL is not set > > CONFIG_HAVE_GENERIC_DMA_COHERENT=y > > CONFIG_SLABINFO=y > > CONFIG_RT_MUTEXES=y > > CONFIG_BASE_SMALL=0 > > CONFIG_MODULES=y > > CONFIG_MODULE_FORCE_LOAD=y > > CONFIG_MODULE_UNLOAD=y > > CONFIG_MODULE_FORCE_UNLOAD=y > > CONFIG_MODVERSIONS=y > > # CONFIG_MODULE_SRCVERSION_ALL is not set > > CONFIG_STOP_MACHINE=y > > CONFIG_BLOCK=y > > CONFIG_LBDAF=y > > CONFIG_BLK_DEV_BSG=y > > CONFIG_BLK_DEV_BSGLIB=y > > CONFIG_BLK_DEV_INTEGRITY=y > > > > # > > # IO Schedulers > > # > > CONFIG_IOSCHED_NOOP=y > > CONFIG_IOSCHED_DEADLINE=y > > CONFIG_IOSCHED_CFQ=y > > # CONFIG_DEFAULT_DEADLINE is not set > > CONFIG_DEFAULT_CFQ=y > > # CONFIG_DEFAULT_NOOP is not set > > CONFIG_DEFAULT_IOSCHED="cfq" > > # CONFIG_INLINE_SPIN_TRYLOCK is not set > > # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set > > # CONFIG_INLINE_SPIN_LOCK is not set > > # CONFIG_INLINE_SPIN_LOCK_BH is not set > > # CONFIG_INLINE_SPIN_LOCK_IRQ is not set > > # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set > > CONFIG_INLINE_SPIN_UNLOCK=y > > # CONFIG_INLINE_SPIN_UNLOCK_BH is not set > > CONFIG_INLINE_SPIN_UNLOCK_IRQ=y > > # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set > > # CONFIG_INLINE_READ_TRYLOCK is not set > > # CONFIG_INLINE_READ_LOCK is not set > > # CONFIG_INLINE_READ_LOCK_BH is not set > > # CONFIG_INLINE_READ_LOCK_IRQ is not set > > # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set > > CONFIG_INLINE_READ_UNLOCK=y > > # CONFIG_INLINE_READ_UNLOCK_BH is not set > > CONFIG_INLINE_READ_UNLOCK_IRQ=y > > # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set > > # CONFIG_INLINE_WRITE_TRYLOCK is not set > > # CONFIG_INLINE_WRITE_LOCK is not set > > # CONFIG_INLINE_WRITE_LOCK_BH is not set > > # CONFIG_INLINE_WRITE_LOCK_IRQ is not set > > # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set > > CONFIG_INLINE_WRITE_UNLOCK=y > > # CONFIG_INLINE_WRITE_UNLOCK_BH is not set > > CONFIG_INLINE_WRITE_UNLOCK_IRQ=y > > # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set > > # CONFIG_MUTEX_SPIN_ON_OWNER is not set > > CONFIG_FREEZER=y > > > > # > > # Processor type and features > > # > > CONFIG_TICK_ONESHOT=y > > CONFIG_NO_HZ=y > > CONFIG_HIGH_RES_TIMERS=y > > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > > CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y > > CONFIG_SMP=y > > CONFIG_X86_MPPARSE=y > > CONFIG_X86_BIGSMP=y > > # CONFIG_X86_EXTENDED_PLATFORM is not set > > CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y > > # CONFIG_X86_32_IRIS is not set > > CONFIG_SCHED_OMIT_FRAME_POINTER=y > > CONFIG_PARAVIRT_GUEST=y > > # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set > > CONFIG_XEN=y > > CONFIG_XEN_DOM0=y > > CONFIG_XEN_PRIVILEGED_GUEST=y > > CONFIG_XEN_PVHVM=y > > CONFIG_XEN_MAX_DOMAIN_MEMORY=128 > > CONFIG_XEN_SAVE_RESTORE=y > > CONFIG_XEN_DEBUG_FS=y > > # CONFIG_KVM_CLOCK is not set > > # CONFIG_KVM_GUEST is not set > > # CONFIG_LGUEST_GUEST is not set > > CONFIG_PARAVIRT=y > > CONFIG_PARAVIRT_SPINLOCKS=y > > CONFIG_PARAVIRT_CLOCK=y > > CONFIG_PARAVIRT_DEBUG=y > > CONFIG_NO_BOOTMEM=y > > # CONFIG_MEMTEST is not set > > # CONFIG_M386 is not set > > # CONFIG_M486 is not set > > # CONFIG_M586 is not set > > # CONFIG_M586TSC is not set > > # CONFIG_M586MMX is not set > > # CONFIG_M686 is not set > > # CONFIG_MPENTIUMII is not set > > # CONFIG_MPENTIUMIII is not set > > # CONFIG_MPENTIUMM is not set > > # CONFIG_MPENTIUM4 is not set > > # CONFIG_MK6 is not set > > # CONFIG_MK7 is not set > > # CONFIG_MK8 is not set > > # CONFIG_MCRUSOE is not set > > # CONFIG_MEFFICEON is not set > > # CONFIG_MWINCHIPC6 is not set > > # CONFIG_MWINCHIP3D is not set > > # CONFIG_MELAN is not set > > # CONFIG_MGEODEGX1 is not set > > # CONFIG_MGEODE_LX is not set > > # CONFIG_MCYRIXIII is not set > > # CONFIG_MVIAC3_2 is not set > > # CONFIG_MVIAC7 is not set > > CONFIG_MCORE2=y > > # CONFIG_MATOM is not set > > CONFIG_X86_GENERIC=y > > CONFIG_X86_INTERNODE_CACHE_SHIFT=7 > > CONFIG_X86_CMPXCHG=y > > CONFIG_CMPXCHG_LOCAL=y > > CONFIG_CMPXCHG_DOUBLE=y > > CONFIG_X86_L1_CACHE_SHIFT=6 > > CONFIG_X86_XADD=y > > CONFIG_X86_WP_WORKS_OK=y > > CONFIG_X86_INVLPG=y > > CONFIG_X86_BSWAP=y > > CONFIG_X86_POPAD_OK=y > > CONFIG_X86_INTEL_USERCOPY=y > > CONFIG_X86_USE_PPRO_CHECKSUM=y > > CONFIG_X86_TSC=y > > CONFIG_X86_CMPXCHG64=y > > CONFIG_X86_CMOV=y > > CONFIG_X86_MINIMUM_CPU_FAMILY=5 > > CONFIG_X86_DEBUGCTLMSR=y > > CONFIG_CPU_SUP_INTEL=y > > CONFIG_CPU_SUP_CYRIX_32=y > > CONFIG_CPU_SUP_AMD=y > > CONFIG_CPU_SUP_CENTAUR=y > > CONFIG_CPU_SUP_TRANSMETA_32=y > > CONFIG_CPU_SUP_UMC_32=y > > CONFIG_HPET_TIMER=y > > CONFIG_HPET_EMULATE_RTC=y > > CONFIG_DMI=y > > CONFIG_SWIOTLB=y > > CONFIG_IOMMU_HELPER=y > > CONFIG_NR_CPUS=32 > > CONFIG_SCHED_SMT=y > > CONFIG_SCHED_MC=y > > # CONFIG_IRQ_TIME_ACCOUNTING is not set > > # CONFIG_PREEMPT_NONE is not set > > CONFIG_PREEMPT_VOLUNTARY=y > > # CONFIG_PREEMPT is not set > > CONFIG_X86_LOCAL_APIC=y > > CONFIG_X86_IO_APIC=y > > CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y > > CONFIG_X86_MCE=y > > CONFIG_X86_MCE_INTEL=y > > CONFIG_X86_MCE_AMD=y > > # CONFIG_X86_ANCIENT_MCE is not set > > CONFIG_X86_MCE_THRESHOLD=y > > CONFIG_X86_MCE_INJECT=m > > CONFIG_X86_THERMAL_VECTOR=y > > CONFIG_VM86=y > > # CONFIG_TOSHIBA is not set > > # CONFIG_I8K is not set > > CONFIG_X86_REBOOTFIXUPS=y > > CONFIG_MICROCODE=m > > CONFIG_MICROCODE_INTEL=y > > CONFIG_MICROCODE_AMD=y > > CONFIG_MICROCODE_OLD_INTERFACE=y > > CONFIG_X86_MSR=m > > CONFIG_X86_CPUID=m > > # CONFIG_NOHIGHMEM is not set > > # CONFIG_HIGHMEM4G is not set > > CONFIG_HIGHMEM64G=y > > CONFIG_PAGE_OFFSET=0xC0000000 > > CONFIG_HIGHMEM=y > > CONFIG_X86_PAE=y > > CONFIG_ARCH_PHYS_ADDR_T_64BIT=y > > CONFIG_ARCH_DMA_ADDR_T_64BIT=y > > CONFIG_NUMA=y > > # CONFIG_NUMA_EMU is not set > > CONFIG_NODES_SHIFT=3 > > CONFIG_HAVE_ARCH_BOOTMEM=y > > CONFIG_HAVE_ARCH_ALLOC_REMAP=y > > CONFIG_ARCH_HAVE_MEMORY_PRESENT=y > > CONFIG_NEED_NODE_MEMMAP_SIZE=y > > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y > > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y > > CONFIG_ARCH_SPARSEMEM_ENABLE=y > > CONFIG_ARCH_SELECT_MEMORY_MODEL=y > > CONFIG_ILLEGAL_POINTER_VALUE=0 > > CONFIG_SELECT_MEMORY_MODEL=y > > CONFIG_DISCONTIGMEM_MANUAL=y > > # CONFIG_SPARSEMEM_MANUAL is not set > > CONFIG_DISCONTIGMEM=y > > CONFIG_FLAT_NODE_MEM_MAP=y > > CONFIG_NEED_MULTIPLE_NODES=y > > CONFIG_HAVE_MEMORY_PRESENT=y > > CONFIG_SPARSEMEM_STATIC=y > > CONFIG_HAVE_MEMBLOCK=y > > CONFIG_PAGEFLAGS_EXTENDED=y > > CONFIG_SPLIT_PTLOCK_CPUS=4 > > # CONFIG_COMPACTION is not set > > CONFIG_MIGRATION=y > > CONFIG_PHYS_ADDR_T_64BIT=y > > CONFIG_ZONE_DMA_FLAG=1 > > CONFIG_BOUNCE=y > > CONFIG_VIRT_TO_BUS=y > > CONFIG_MMU_NOTIFIER=y > > CONFIG_KSM=y > > CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 > > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y > > CONFIG_MEMORY_FAILURE=y > > CONFIG_HWPOISON_INJECT=m > > # CONFIG_TRANSPARENT_HUGEPAGE is not set > > # CONFIG_CLEANCACHE is not set > > # CONFIG_HIGHPTE is not set > > # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set > > CONFIG_X86_RESERVE_LOW=64 > > # CONFIG_MATH_EMULATION is not set > > CONFIG_MTRR=y > > CONFIG_MTRR_SANITIZER=y > > CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 > > CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 > > CONFIG_X86_PAT=y > > CONFIG_ARCH_USES_PG_UNCACHED=y > > CONFIG_ARCH_RANDOM=y > > # CONFIG_EFI is not set > > # CONFIG_SECCOMP is not set > > # CONFIG_CC_STACKPROTECTOR is not set > > # CONFIG_HZ_100 is not set > > CONFIG_HZ_250=y > > # CONFIG_HZ_300 is not set > > # CONFIG_HZ_1000 is not set > > CONFIG_HZ=250 > > CONFIG_SCHED_HRTICK=y > > CONFIG_KEXEC=y > > # CONFIG_CRASH_DUMP is not set > > CONFIG_KEXEC_JUMP=y > > CONFIG_PHYSICAL_START=0x1000000 > > CONFIG_RELOCATABLE=y > > CONFIG_X86_NEED_RELOCS=y > > CONFIG_PHYSICAL_ALIGN=0x1000000 > > CONFIG_HOTPLUG_CPU=y > > # CONFIG_COMPAT_VDSO is not set > > # CONFIG_CMDLINE_BOOL is not set > > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > > CONFIG_USE_PERCPU_NUMA_NODE_ID=y > > > > # > > # Power management and ACPI options > > # > > CONFIG_SUSPEND=y > > CONFIG_SUSPEND_FREEZER=y > > CONFIG_HIBERNATE_CALLBACKS=y > > CONFIG_HIBERNATION=y > > CONFIG_PM_STD_PARTITION="" > > CONFIG_PM_SLEEP=y > > CONFIG_PM_SLEEP_SMP=y > > CONFIG_PM_RUNTIME=y > > CONFIG_PM=y > > CONFIG_PM_DEBUG=y > > # CONFIG_PM_ADVANCED_DEBUG is not set > > # CONFIG_PM_TEST_SUSPEND is not set > > CONFIG_CAN_PM_TRACE=y > > # CONFIG_PM_TRACE_RTC is not set > > CONFIG_ACPI=y > > CONFIG_ACPI_SLEEP=y > > CONFIG_ACPI_PROCFS=y > > # CONFIG_ACPI_PROCFS_POWER is not set > > # CONFIG_ACPI_EC_DEBUGFS is not set > > # CONFIG_ACPI_PROC_EVENT is not set > > CONFIG_ACPI_AC=m > > CONFIG_ACPI_BATTERY=m > > CONFIG_ACPI_BUTTON=m > > CONFIG_ACPI_FAN=m > > CONFIG_ACPI_DOCK=y > > CONFIG_ACPI_PROCESSOR=m > > # CONFIG_ACPI_IPMI is not set > > CONFIG_ACPI_HOTPLUG_CPU=y > > CONFIG_ACPI_PROCESSOR_AGGREGATOR=m > > CONFIG_ACPI_THERMAL=m > > # CONFIG_ACPI_NUMA is not set > > # CONFIG_ACPI_CUSTOM_DSDT is not set > > CONFIG_ACPI_BLACKLIST_YEAR=0 > > # CONFIG_ACPI_DEBUG is not set > > CONFIG_ACPI_PCI_SLOT=m > > CONFIG_X86_PM_TIMER=y > > CONFIG_ACPI_CONTAINER=m > > CONFIG_ACPI_SBS=m > > # CONFIG_ACPI_HED is not set > > # CONFIG_ACPI_CUSTOM_METHOD is not set > > # CONFIG_ACPI_APEI is not set > > # CONFIG_SFI is not set > > CONFIG_X86_APM_BOOT=y > > CONFIG_APM=m > > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > > CONFIG_APM_DO_ENABLE=y > > CONFIG_APM_CPU_IDLE=y > > # CONFIG_APM_DISPLAY_BLANK is not set > > # CONFIG_APM_ALLOW_INTS is not set > > > > # > > # CPU Frequency scaling > > # > > CONFIG_CPU_FREQ=y > > CONFIG_CPU_FREQ_TABLE=y > > CONFIG_CPU_FREQ_STAT=m > > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set > > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set > > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > > CONFIG_CPU_FREQ_GOV_USERSPACE=m > > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m > > > > # > > # x86 CPU frequency scaling drivers > > # > > # CONFIG_X86_PCC_CPUFREQ is not set > > CONFIG_X86_ACPI_CPUFREQ=m > > CONFIG_X86_POWERNOW_K6=m > > CONFIG_X86_POWERNOW_K7=m > > CONFIG_X86_POWERNOW_K7_ACPI=y > > CONFIG_X86_POWERNOW_K8=m > > CONFIG_X86_GX_SUSPMOD=m > > CONFIG_X86_SPEEDSTEP_CENTRINO=m > > CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y > > CONFIG_X86_SPEEDSTEP_ICH=y > > CONFIG_X86_SPEEDSTEP_SMI=m > > CONFIG_X86_P4_CLOCKMOD=m > > CONFIG_X86_CPUFREQ_NFORCE2=m > > CONFIG_X86_LONGRUN=m > > CONFIG_X86_LONGHAUL=m > > # CONFIG_X86_E_POWERSAVER is not set > > > > # > > # shared options > > # > > CONFIG_X86_SPEEDSTEP_LIB=y > > CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y > > CONFIG_CPU_IDLE=y > > CONFIG_CPU_IDLE_GOV_LADDER=y > > CONFIG_CPU_IDLE_GOV_MENU=y > > # CONFIG_INTEL_IDLE is not set > > > > # > > # Bus options (PCI etc.) > > # > > CONFIG_PCI=y > > # CONFIG_PCI_GOBIOS is not set > > # CONFIG_PCI_GOMMCONFIG is not set > > # CONFIG_PCI_GODIRECT is not set > > CONFIG_PCI_GOANY=y > > CONFIG_PCI_BIOS=y > > CONFIG_PCI_DIRECT=y > > CONFIG_PCI_MMCONFIG=y > > CONFIG_PCI_XEN=y > > CONFIG_PCI_DOMAINS=y > > # CONFIG_PCI_CNB20LE_QUIRK is not set > > CONFIG_PCIEPORTBUS=y > > CONFIG_HOTPLUG_PCI_PCIE=m > > CONFIG_PCIEAER=y > > # CONFIG_PCIE_ECRC is not set > > CONFIG_PCIEAER_INJECT=m > > CONFIG_PCIEASPM=y > > # CONFIG_PCIEASPM_DEBUG is not set > > CONFIG_PCIE_PME=y > > CONFIG_ARCH_SUPPORTS_MSI=y > > CONFIG_PCI_MSI=y > > # CONFIG_PCI_DEBUG is not set > > CONFIG_PCI_STUB=m > > CONFIG_XEN_PCIDEV_FRONTEND=m > > CONFIG_HT_IRQ=y > > CONFIG_PCI_ATS=y > > CONFIG_PCI_IOV=y > > # CONFIG_PCI_PRI is not set > > # CONFIG_PCI_PASID is not set > > CONFIG_PCI_IOAPIC=y > > CONFIG_PCI_LABEL=y > > CONFIG_ISA_DMA_API=y > > CONFIG_ISA=y > > # CONFIG_EISA is not set > > # CONFIG_MCA is not set > > CONFIG_SCx200=m > > CONFIG_SCx200HR_TIMER=m > > # CONFIG_ALIX is not set > > CONFIG_AMD_NB=y > > # CONFIG_PCCARD is not set > > CONFIG_HOTPLUG_PCI=m > > # CONFIG_HOTPLUG_PCI_FAKE is not set > > # CONFIG_HOTPLUG_PCI_COMPAQ is not set > > # CONFIG_HOTPLUG_PCI_IBM is not set > > CONFIG_HOTPLUG_PCI_ACPI=m > > # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set > > CONFIG_HOTPLUG_PCI_CPCI=y > > # CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set > > CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m > > # CONFIG_HOTPLUG_PCI_SHPC is not set > > # CONFIG_RAPIDIO is not set > > > > # > > # Executable file formats / Emulations > > # > > CONFIG_BINFMT_ELF=y > > CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y > > CONFIG_HAVE_AOUT=y > > CONFIG_BINFMT_AOUT=m > > CONFIG_BINFMT_MISC=m > > CONFIG_HAVE_ATOMIC_IOMAP=y > > CONFIG_HAVE_TEXT_POKE_SMP=y > > CONFIG_NET=y > > > > # > > # Networking options > > # > > CONFIG_PACKET=y > > CONFIG_UNIX=y > > CONFIG_XFRM=y > > CONFIG_XFRM_USER=m > > CONFIG_XFRM_SUB_POLICY=y > > CONFIG_XFRM_MIGRATE=y > > # CONFIG_XFRM_STATISTICS is not set > > CONFIG_XFRM_IPCOMP=m > > CONFIG_NET_KEY=m > > CONFIG_NET_KEY_MIGRATE=y > > CONFIG_INET=y > > CONFIG_IP_MULTICAST=y > > CONFIG_IP_ADVANCED_ROUTER=y > > # CONFIG_IP_FIB_TRIE_STATS is not set > > CONFIG_IP_MULTIPLE_TABLES=y > > CONFIG_IP_ROUTE_MULTIPATH=y > > CONFIG_IP_ROUTE_VERBOSE=y > > # CONFIG_IP_PNP is not set > > CONFIG_NET_IPIP=m > > # CONFIG_NET_IPGRE_DEMUX is not set > > CONFIG_IP_MROUTE=y > > # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set > > CONFIG_IP_PIMSM_V1=y > > CONFIG_IP_PIMSM_V2=y > > # CONFIG_ARPD is not set > > CONFIG_SYN_COOKIES=y > > # CONFIG_INET_AH is not set > > # CONFIG_INET_ESP is not set > > # CONFIG_INET_IPCOMP is not set > > # CONFIG_INET_XFRM_TUNNEL is not set > > CONFIG_INET_TUNNEL=m > > # CONFIG_INET_XFRM_MODE_TRANSPORT is not set > > # CONFIG_INET_XFRM_MODE_TUNNEL is not set > > # CONFIG_INET_XFRM_MODE_BEET is not set > > CONFIG_INET_LRO=m > > CONFIG_INET_DIAG=m > > CONFIG_INET_TCP_DIAG=m > > CONFIG_TCP_CONG_ADVANCED=y > > CONFIG_TCP_CONG_BIC=m > > CONFIG_TCP_CONG_CUBIC=y > > CONFIG_TCP_CONG_WESTWOOD=m > > CONFIG_TCP_CONG_HTCP=m > > CONFIG_TCP_CONG_HSTCP=m > > CONFIG_TCP_CONG_HYBLA=m > > CONFIG_TCP_CONG_VEGAS=m > > CONFIG_TCP_CONG_SCALABLE=m > > CONFIG_TCP_CONG_LP=m > > CONFIG_TCP_CONG_VENO=m > > CONFIG_TCP_CONG_YEAH=m > > CONFIG_TCP_CONG_ILLINOIS=m > > CONFIG_DEFAULT_CUBIC=y > > # CONFIG_DEFAULT_RENO is not set > > CONFIG_DEFAULT_TCP_CONG="cubic" > > CONFIG_TCP_MD5SIG=y > > CONFIG_IPV6=y > > CONFIG_IPV6_PRIVACY=y > > CONFIG_IPV6_ROUTER_PREF=y > > CONFIG_IPV6_ROUTE_INFO=y > > CONFIG_IPV6_OPTIMISTIC_DAD=y > > CONFIG_INET6_AH=m > > CONFIG_INET6_ESP=m > > CONFIG_INET6_IPCOMP=m > > CONFIG_IPV6_MIP6=y > > CONFIG_INET6_XFRM_TUNNEL=m > > CONFIG_INET6_TUNNEL=m > > CONFIG_INET6_XFRM_MODE_TRANSPORT=m > > CONFIG_INET6_XFRM_MODE_TUNNEL=m > > CONFIG_INET6_XFRM_MODE_BEET=m > > CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m > > CONFIG_IPV6_SIT=m > > # CONFIG_IPV6_SIT_6RD is not set > > CONFIG_IPV6_NDISC_NODETYPE=y > > CONFIG_IPV6_TUNNEL=m > > CONFIG_IPV6_MULTIPLE_TABLES=y > > CONFIG_IPV6_SUBTREES=y > > CONFIG_IPV6_MROUTE=y > > # CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set > > CONFIG_IPV6_PIMSM_V2=y > > CONFIG_NETWORK_SECMARK=y > > # CONFIG_NETWORK_PHY_TIMESTAMPING is not set > > # CONFIG_NETFILTER is not set > > # CONFIG_IP_DCCP is not set > > CONFIG_IP_SCTP=y > > # CONFIG_SCTP_DBG_MSG is not set > > # CONFIG_SCTP_DBG_OBJCNT is not set > > CONFIG_SCTP_HMAC_NONE=y > > # CONFIG_SCTP_HMAC_SHA1 is not set > > # CONFIG_SCTP_HMAC_MD5 is not set > > # CONFIG_RDS is not set > > # CONFIG_TIPC is not set > > # CONFIG_ATM is not set > > # CONFIG_L2TP is not set > > CONFIG_STP=m > > CONFIG_GARP=m > > CONFIG_BRIDGE=m > > CONFIG_BRIDGE_IGMP_SNOOPING=y > > # CONFIG_NET_DSA is not set > > CONFIG_VLAN_8021Q=m > > CONFIG_VLAN_8021Q_GVRP=y > > # CONFIG_DECNET is not set > > CONFIG_LLC=m > > CONFIG_LLC2=m > > # CONFIG_IPX is not set > > # CONFIG_ATALK is not set > > # CONFIG_X25 is not set > > # CONFIG_LAPB is not set > > # CONFIG_ECONET is not set > > # CONFIG_WAN_ROUTER is not set > > # CONFIG_PHONET is not set > > # CONFIG_IEEE802154 is not set > > # CONFIG_NET_SCHED is not set > > CONFIG_DCB=y > > CONFIG_DNS_RESOLVER=y > > # CONFIG_BATMAN_ADV is not set > > CONFIG_RPS=y > > CONFIG_RFS_ACCEL=y > > CONFIG_XPS=y > > > > # > > # Network testing > > # > > CONFIG_NET_PKTGEN=m > > CONFIG_NET_DROP_MONITOR=y > > # CONFIG_HAMRADIO is not set > > # CONFIG_CAN is not set > > # CONFIG_IRDA is not set > > # CONFIG_BT is not set > > CONFIG_AF_RXRPC=m > > # CONFIG_AF_RXRPC_DEBUG is not set > > CONFIG_RXKAD=m > > CONFIG_FIB_RULES=y > > # CONFIG_WIRELESS is not set > > # CONFIG_WIMAX is not set > > # CONFIG_RFKILL is not set > > # CONFIG_NET_9P is not set > > # CONFIG_CAIF is not set > > # CONFIG_CEPH_LIB is not set > > # CONFIG_NFC is not set > > > > # > > # Device Drivers > > # > > > > # > > # Generic Driver Options > > # > > CONFIG_UEVENT_HELPER_PATH="" > > CONFIG_DEVTMPFS=y > > CONFIG_DEVTMPFS_MOUNT=y > > CONFIG_STANDALONE=y > > CONFIG_PREVENT_FIRMWARE_BUILD=y > > CONFIG_FW_LOADER=y > > # CONFIG_FIRMWARE_IN_KERNEL is not set > > CONFIG_EXTRA_FIRMWARE="" > > # CONFIG_DEBUG_DRIVER is not set > > # CONFIG_DEBUG_DEVRES is not set > > CONFIG_SYS_HYPERVISOR=y > > CONFIG_CONNECTOR=m > > CONFIG_MTD=y > > # CONFIG_MTD_TESTS is not set > > CONFIG_MTD_REDBOOT_PARTS=m > > CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 > > # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set > > # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set > > # CONFIG_MTD_CMDLINE_PARTS is not set > > # CONFIG_MTD_AR7_PARTS is not set > > > > # > > # User Modules And Translation Layers > > # > > # CONFIG_MTD_CHAR is not set > > CONFIG_MTD_BLKDEVS=m > > # CONFIG_MTD_BLOCK is not set > > # CONFIG_MTD_BLOCK_RO is not set > > CONFIG_FTL=m > > CONFIG_NFTL=m > > CONFIG_NFTL_RW=y > > CONFIG_INFTL=m > > CONFIG_RFD_FTL=m > > CONFIG_SSFDC=m > > # CONFIG_SM_FTL is not set > > # CONFIG_MTD_OOPS is not set > > # CONFIG_MTD_SWAP is not set > > > > # > > # RAM/ROM/Flash chip drivers > > # > > # CONFIG_MTD_CFI is not set > > CONFIG_MTD_JEDECPROBE=y > > CONFIG_MTD_GEN_PROBE=y > > # CONFIG_MTD_CFI_ADV_OPTIONS is not set > > CONFIG_MTD_MAP_BANK_WIDTH_1=y > > CONFIG_MTD_MAP_BANK_WIDTH_2=y > > CONFIG_MTD_MAP_BANK_WIDTH_4=y > > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set > > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set > > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set > > CONFIG_MTD_CFI_I1=y > > CONFIG_MTD_CFI_I2=y > > # CONFIG_MTD_CFI_I4 is not set > > # CONFIG_MTD_CFI_I8 is not set > > CONFIG_MTD_CFI_INTELEXT=m > > CONFIG_MTD_CFI_AMDSTD=m > > # CONFIG_MTD_CFI_STAA is not set > > CONFIG_MTD_CFI_UTIL=m > > # CONFIG_MTD_RAM is not set > > # CONFIG_MTD_ROM is not set > > # CONFIG_MTD_ABSENT is not set > > > > # > > # Mapping drivers for chip access > > # > > # CONFIG_MTD_COMPLEX_MAPPINGS is not set > > # CONFIG_MTD_PHYSMAP is not set > > # CONFIG_MTD_TS5500 is not set > > # CONFIG_MTD_AMD76XROM is not set > > # CONFIG_MTD_ICHXROM is not set > > # CONFIG_MTD_ESB2ROM is not set > > # CONFIG_MTD_CK804XROM is not set > > # CONFIG_MTD_SCB2_FLASH is not set > > # CONFIG_MTD_NETtel is not set > > # CONFIG_MTD_L440GX is not set > > CONFIG_MTD_INTEL_VR_NOR=y > > # CONFIG_MTD_PLATRAM is not set > > > > # > > # Self-contained MTD device drivers > > # > > # CONFIG_MTD_PMC551 is not set > > # CONFIG_MTD_SLRAM is not set > > CONFIG_MTD_PHRAM=y > > # CONFIG_MTD_MTDRAM is not set > > # CONFIG_MTD_BLOCK2MTD is not set > > > > # > > # Disk-On-Chip Device Drivers > > # > > # CONFIG_MTD_DOC2000 is not set > > # CONFIG_MTD_DOC2001 is not set > > # CONFIG_MTD_DOC2001PLUS is not set > > # CONFIG_MTD_DOCG3 is not set > > CONFIG_MTD_NAND_ECC=m > > # CONFIG_MTD_NAND_ECC_SMC is not set > > CONFIG_MTD_NAND=m > > # CONFIG_MTD_NAND_VERIFY_WRITE is not set > > # CONFIG_MTD_NAND_ECC_BCH is not set > > # CONFIG_MTD_SM_COMMON is not set > > # CONFIG_MTD_NAND_MUSEUM_IDS is not set > > # CONFIG_MTD_NAND_DENALI is not set > > CONFIG_MTD_NAND_IDS=m > > # CONFIG_MTD_NAND_RICOH is not set > > # CONFIG_MTD_NAND_DISKONCHIP is not set > > # CONFIG_MTD_NAND_CAFE is not set > > CONFIG_MTD_NAND_CS553X=m > > # CONFIG_MTD_NAND_NANDSIM is not set > > # CONFIG_MTD_NAND_PLATFORM is not set > > # CONFIG_MTD_ALAUDA is not set > > # CONFIG_MTD_ONENAND is not set > > > > # > > # LPDDR flash memory drivers > > # > > # CONFIG_MTD_LPDDR is not set > > # CONFIG_MTD_UBI is not set > > CONFIG_PARPORT=m > > CONFIG_PARPORT_PC=m > > # CONFIG_PARPORT_SERIAL is not set > > # CONFIG_PARPORT_PC_FIFO is not set > > # CONFIG_PARPORT_PC_SUPERIO is not set > > # CONFIG_PARPORT_GSC is not set > > # CONFIG_PARPORT_AX88796 is not set > > # CONFIG_PARPORT_1284 is not set > > CONFIG_PNP=y > > # CONFIG_PNP_DEBUG_MESSAGES is not set > > > > # > > # Protocols > > # > > CONFIG_ISAPNP=y > > CONFIG_PNPBIOS=y > > CONFIG_PNPBIOS_PROC_FS=y > > CONFIG_PNPACPI=y > > CONFIG_BLK_DEV=y > > CONFIG_BLK_DEV_FD=m > > # CONFIG_BLK_DEV_XD is not set > > # CONFIG_PARIDE is not set > > CONFIG_BLK_CPQ_DA=m > > CONFIG_BLK_CPQ_CISS_DA=m > > CONFIG_CISS_SCSI_TAPE=y > > CONFIG_BLK_DEV_DAC960=m > > CONFIG_BLK_DEV_UMEM=m > > # CONFIG_BLK_DEV_COW_COMMON is not set > > CONFIG_BLK_DEV_LOOP=m > > CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 > > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > > CONFIG_BLK_DEV_DRBD=m > > # CONFIG_DRBD_FAULT_INJECTION is not set > > CONFIG_BLK_DEV_NBD=m > > CONFIG_BLK_DEV_OSD=m > > CONFIG_BLK_DEV_SX8=m > > # CONFIG_BLK_DEV_UB is not set > > CONFIG_BLK_DEV_RAM=m > > CONFIG_BLK_DEV_RAM_COUNT=16 > > CONFIG_BLK_DEV_RAM_SIZE=8192 > > # CONFIG_BLK_DEV_XIP is not set > > CONFIG_CDROM_PKTCDVD=m > > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > > # CONFIG_CDROM_PKTCDVD_WCACHE is not set > > # CONFIG_ATA_OVER_ETH is not set > > CONFIG_XEN_BLKDEV_FRONTEND=y > > CONFIG_XEN_BLKDEV_BACKEND=y > > # CONFIG_BLK_DEV_HD is not set > > # CONFIG_BLK_DEV_RBD is not set > > # CONFIG_SENSORS_LIS3LV02D is not set > > CONFIG_MISC_DEVICES=y > > # CONFIG_AD525X_DPOT is not set > > # CONFIG_IBM_ASM is not set > > CONFIG_PHANTOM=m > > # CONFIG_INTEL_MID_PTI is not set > > CONFIG_SGI_IOC4=m > > CONFIG_TIFM_CORE=m > > CONFIG_TIFM_7XX1=m > > CONFIG_ICS932S401=m > > CONFIG_ENCLOSURE_SERVICES=m > > CONFIG_HP_ILO=m > > # CONFIG_APDS9802ALS is not set > > CONFIG_ISL29003=m > > # CONFIG_ISL29020 is not set > > CONFIG_SENSORS_TSL2550=m > > # CONFIG_SENSORS_BH1780 is not set > > # CONFIG_SENSORS_BH1770 is not set > > # CONFIG_SENSORS_APDS990X is not set > > # CONFIG_HMC6352 is not set > > CONFIG_DS1682=m > > # CONFIG_VMWARE_BALLOON is not set > > # CONFIG_BMP085 is not set > > # CONFIG_PCH_PHUB is not set > > # CONFIG_USB_SWITCH_FSA9480 is not set > > # CONFIG_C2PORT is not set > > > > # > > # EEPROM support > > # > > CONFIG_EEPROM_AT24=m > > CONFIG_EEPROM_LEGACY=m > > CONFIG_EEPROM_MAX6875=m > > CONFIG_EEPROM_93CX6=m > > CONFIG_CB710_CORE=m > > CONFIG_CB710_DEBUG=y > > CONFIG_CB710_DEBUG_ASSUMPTIONS=y > > > > # > > # Texas Instruments shared transport line discipline > > # > > # CONFIG_TI_ST is not set > > # CONFIG_SENSORS_LIS3_I2C is not set > > > > # > > # Altera FPGA firmware download module > > # > > # CONFIG_ALTERA_STAPL is not set > > CONFIG_HAVE_IDE=y > > # CONFIG_IDE is not set > > > > # > > # SCSI device support > > # > > CONFIG_SCSI_MOD=m > > CONFIG_RAID_ATTRS=m > > CONFIG_SCSI=m > > CONFIG_SCSI_DMA=y > > CONFIG_SCSI_TGT=m > > CONFIG_SCSI_NETLINK=y > > CONFIG_SCSI_PROC_FS=y > > > > # > > # SCSI support type (disk, tape, CD-ROM) > > # > > CONFIG_BLK_DEV_SD=m > > CONFIG_CHR_DEV_ST=m > > CONFIG_CHR_DEV_OSST=m > > CONFIG_BLK_DEV_SR=m > > CONFIG_BLK_DEV_SR_VENDOR=y > > CONFIG_CHR_DEV_SG=m > > CONFIG_CHR_DEV_SCH=m > > CONFIG_SCSI_ENCLOSURE=m > > CONFIG_SCSI_MULTI_LUN=y > > CONFIG_SCSI_CONSTANTS=y > > CONFIG_SCSI_LOGGING=y > > CONFIG_SCSI_SCAN_ASYNC=y > > CONFIG_SCSI_WAIT_SCAN=m > > > > # > > # SCSI Transports > > # > > CONFIG_SCSI_SPI_ATTRS=m > > CONFIG_SCSI_FC_ATTRS=m > > CONFIG_SCSI_FC_TGT_ATTRS=y > > CONFIG_SCSI_ISCSI_ATTRS=m > > CONFIG_SCSI_SAS_ATTRS=m > > CONFIG_SCSI_SAS_LIBSAS=m > > CONFIG_SCSI_SAS_HOST_SMP=y > > CONFIG_SCSI_SRP_ATTRS=m > > CONFIG_SCSI_SRP_TGT_ATTRS=y > > CONFIG_SCSI_LOWLEVEL=y > > CONFIG_ISCSI_TCP=m > > CONFIG_ISCSI_BOOT_SYSFS=m > > # CONFIG_SCSI_CXGB3_ISCSI is not set > > # CONFIG_SCSI_CXGB4_ISCSI is not set > > CONFIG_SCSI_BNX2_ISCSI=m > > CONFIG_SCSI_BNX2X_FCOE=m > > # CONFIG_BE2ISCSI is not set > > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > > # CONFIG_SCSI_HPSA is not set > > # CONFIG_SCSI_3W_9XXX is not set > > # CONFIG_SCSI_3W_SAS is not set > > # CONFIG_SCSI_7000FASST is not set > > # CONFIG_SCSI_ACARD is not set > > # CONFIG_SCSI_AHA152X is not set > > # CONFIG_SCSI_AHA1542 is not set > > # CONFIG_SCSI_AACRAID is not set > > # CONFIG_SCSI_AIC7XXX is not set > > # CONFIG_SCSI_AIC7XXX_OLD is not set > > # CONFIG_SCSI_AIC79XX is not set > > # CONFIG_SCSI_AIC94XX is not set > > # CONFIG_SCSI_MVSAS is not set > > # CONFIG_SCSI_MVUMI is not set > > # CONFIG_SCSI_DPT_I2O is not set > > # CONFIG_SCSI_ADVANSYS is not set > > # CONFIG_SCSI_IN2000 is not set > > # CONFIG_SCSI_ARCMSR is not set > > # CONFIG_MEGARAID_NEWGEN is not set > > # CONFIG_MEGARAID_LEGACY is not set > > # CONFIG_MEGARAID_SAS is not set > > CONFIG_SCSI_MPT2SAS=m > > CONFIG_SCSI_MPT2SAS_MAX_SGE=128 > > CONFIG_SCSI_MPT2SAS_LOGGING=y > > # CONFIG_SCSI_HPTIOP is not set > > # CONFIG_SCSI_BUSLOGIC is not set > > # CONFIG_VMWARE_PVSCSI is not set > > CONFIG_LIBFC=m > > CONFIG_LIBFCOE=m > > # CONFIG_FCOE is not set > > # CONFIG_FCOE_FNIC is not set > > # CONFIG_SCSI_DMX3191D is not set > > # CONFIG_SCSI_DTC3280 is not set > > # CONFIG_SCSI_EATA is not set > > # CONFIG_SCSI_FUTURE_DOMAIN is not set > > # CONFIG_SCSI_GDTH is not set > > # CONFIG_SCSI_ISCI is not set > > # CONFIG_SCSI_GENERIC_NCR5380 is not set > > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set > > # CONFIG_SCSI_IPS is not set > > # CONFIG_SCSI_INITIO is not set > > # CONFIG_SCSI_INIA100 is not set > > # CONFIG_SCSI_PPA is not set > > # CONFIG_SCSI_IMM is not set > > # CONFIG_SCSI_NCR53C406A is not set > > # CONFIG_SCSI_STEX is not set > > # CONFIG_SCSI_SYM53C8XX_2 is not set > > # CONFIG_SCSI_PAS16 is not set > > # CONFIG_SCSI_QLOGIC_FAS is not set > > # CONFIG_SCSI_QLOGIC_1280 is not set > > # CONFIG_SCSI_QLA_FC is not set > > # CONFIG_SCSI_QLA_ISCSI is not set > > # CONFIG_SCSI_LPFC is not set > > # CONFIG_SCSI_SYM53C416 is not set > > # CONFIG_SCSI_DC395x is not set > > # CONFIG_SCSI_DC390T is not set > > # CONFIG_SCSI_T128 is not set > > # CONFIG_SCSI_U14_34F is not set > > # CONFIG_SCSI_ULTRASTOR is not set > > # CONFIG_SCSI_NSP32 is not set > > CONFIG_SCSI_DEBUG=m > > # CONFIG_SCSI_PMCRAID is not set > > # CONFIG_SCSI_PM8001 is not set > > # CONFIG_SCSI_SRP is not set > > # CONFIG_SCSI_BFA_FC is not set > > CONFIG_SCSI_DH=m > > CONFIG_SCSI_DH_RDAC=m > > CONFIG_SCSI_DH_HP_SW=m > > # CONFIG_SCSI_DH_EMC is not set > > CONFIG_SCSI_DH_ALUA=m > > CONFIG_SCSI_OSD_INITIATOR=m > > CONFIG_SCSI_OSD_ULD=m > > CONFIG_SCSI_OSD_DPRINT_SENSE=1 > > # CONFIG_SCSI_OSD_DEBUG is not set > > # CONFIG_ATA is not set > > CONFIG_MD=y > > # CONFIG_BLK_DEV_MD is not set > > CONFIG_BLK_DEV_DM=m > > CONFIG_DM_DEBUG=y > > # CONFIG_DM_CRYPT is not set > > CONFIG_DM_SNAPSHOT=m > > # CONFIG_DM_THIN_PROVISIONING is not set > > CONFIG_DM_MIRROR=m > > # CONFIG_DM_RAID is not set > > CONFIG_DM_LOG_USERSPACE=m > > CONFIG_DM_ZERO=m > > CONFIG_DM_MULTIPATH=m > > CONFIG_DM_MULTIPATH_QL=m > > CONFIG_DM_MULTIPATH_ST=m > > CONFIG_DM_DELAY=m > > CONFIG_DM_UEVENT=y > > # CONFIG_DM_FLAKEY is not set > > # CONFIG_TARGET_CORE is not set > > CONFIG_FUSION=y > > # CONFIG_FUSION_SPI is not set > > # CONFIG_FUSION_FC is not set > > CONFIG_FUSION_SAS=m > > CONFIG_FUSION_MAX_SGE=128 > > # CONFIG_FUSION_CTL is not set > > # CONFIG_FUSION_LOGGING is not set > > > > # > > # IEEE 1394 (FireWire) support > > # > > # CONFIG_FIREWIRE is not set > > # CONFIG_FIREWIRE_NOSY is not set > > # CONFIG_I2O is not set > > # CONFIG_MACINTOSH_DRIVERS is not set > > CONFIG_NETDEVICES=y > > CONFIG_NET_CORE=y > > CONFIG_BONDING=m > > CONFIG_DUMMY=m > > CONFIG_EQUALIZER=m > > CONFIG_NET_FC=y > > CONFIG_MII=m > > CONFIG_MACVLAN=m > > CONFIG_MACVTAP=m > > CONFIG_NETCONSOLE=y > > # CONFIG_NETCONSOLE_DYNAMIC is not set > > CONFIG_NETPOLL=y > > # CONFIG_NETPOLL_TRAP is not set > > CONFIG_NET_POLL_CONTROLLER=y > > CONFIG_TUN=m > > CONFIG_VETH=m > > # CONFIG_ARCNET is not set > > > > # > > # CAIF transport drivers > > # > > CONFIG_ETHERNET=y > > CONFIG_MDIO=m > > CONFIG_NET_VENDOR_3COM=y > > # CONFIG_EL1 is not set > > # CONFIG_EL3 is not set > > # CONFIG_3C515 is not set > > # CONFIG_VORTEX is not set > > # CONFIG_TYPHOON is not set > > CONFIG_NET_VENDOR_ADAPTEC=y > > # CONFIG_ADAPTEC_STARFIRE is not set > > CONFIG_NET_VENDOR_ALTEON=y > > # CONFIG_ACENIC is not set > > CONFIG_NET_VENDOR_AMD=y > > # CONFIG_AMD8111_ETH is not set > > # CONFIG_LANCE is not set > > # CONFIG_PCNET32 is not set > > # CONFIG_DEPCA is not set > > # CONFIG_NI65 is not set > > CONFIG_NET_VENDOR_ATHEROS=y > > # CONFIG_ATL2 is not set > > # CONFIG_ATL1 is not set > > # CONFIG_ATL1E is not set > > # CONFIG_ATL1C is not set > > CONFIG_NET_VENDOR_BROADCOM=y > > # CONFIG_B44 is not set > > CONFIG_BNX2=m > > CONFIG_CNIC=m > > CONFIG_TIGON3=m > > CONFIG_BNX2X=m > > CONFIG_NET_VENDOR_BROCADE=y > > # CONFIG_BNA is not set > > CONFIG_NET_VENDOR_CHELSIO=y > > # CONFIG_CHELSIO_T1 is not set > > # CONFIG_CHELSIO_T3 is not set > > # CONFIG_CHELSIO_T4 is not set > > # CONFIG_CHELSIO_T4VF is not set > > CONFIG_NET_VENDOR_CIRRUS=y > > # CONFIG_CS89x0 is not set > > CONFIG_NET_VENDOR_CISCO=y > > # CONFIG_ENIC is not set > > # CONFIG_DNET is not set > > CONFIG_NET_VENDOR_DEC=y > > # CONFIG_EWRK3 is not set > > # CONFIG_NET_TULIP is not set > > CONFIG_NET_VENDOR_DLINK=y > > # CONFIG_DE600 is not set > > # CONFIG_DE620 is not set > > # CONFIG_DL2K is not set > > # CONFIG_SUNDANCE is not set > > CONFIG_NET_VENDOR_EMULEX=y > > # CONFIG_BE2NET is not set > > CONFIG_NET_VENDOR_EXAR=y > > # CONFIG_S2IO is not set > > # CONFIG_VXGE is not set > > CONFIG_NET_VENDOR_FUJITSU=y > > # CONFIG_AT1700 is not set > > # CONFIG_ETH16I is not set > > CONFIG_NET_VENDOR_HP=y > > # CONFIG_HP100 is not set > > CONFIG_NET_VENDOR_INTEL=y > > # CONFIG_E100 is not set > > # CONFIG_E1000 is not set > > # CONFIG_E1000E is not set > > # CONFIG_IGB is not set > > # CONFIG_IGBVF is not set > > # CONFIG_IXGB is not set > > # CONFIG_IXGBE is not set > > # CONFIG_IXGBEVF is not set > > CONFIG_NET_VENDOR_I825XX=y > > # CONFIG_ELPLUS is not set > > # CONFIG_EL16 is not set > > # CONFIG_APRICOT is not set > > # CONFIG_EEXPRESS is not set > > # CONFIG_EEXPRESS_PRO is not set > > # CONFIG_LP486E is not set > > # CONFIG_NI52 is not set > > # CONFIG_ZNET is not set > > # CONFIG_IP1000 is not set > > # CONFIG_JME is not set > > CONFIG_NET_VENDOR_MARVELL=y > > # CONFIG_SKGE is not set > > # CONFIG_SKY2 is not set > > CONFIG_NET_VENDOR_MELLANOX=y > > # CONFIG_MLX4_EN is not set > > # CONFIG_MLX4_CORE is not set > > CONFIG_NET_VENDOR_MICREL=y > > # CONFIG_KS8842 is not set > > # CONFIG_KS8851_MLL is not set > > # CONFIG_KSZ884X_PCI is not set > > CONFIG_NET_VENDOR_MYRI=y > > # CONFIG_MYRI10GE is not set > > # CONFIG_FEALNX is not set > > CONFIG_NET_VENDOR_NATSEMI=y > > # CONFIG_NATSEMI is not set > > # CONFIG_NS83820 is not set > > CONFIG_NET_VENDOR_8390=y > > # CONFIG_EL2 is not set > > # CONFIG_AC3200 is not set > > # CONFIG_E2100 is not set > > # CONFIG_HPLAN_PLUS is not set > > # CONFIG_HPLAN is not set > > # CONFIG_NE2000 is not set > > # CONFIG_NE2K_PCI is not set > > # CONFIG_ULTRA is not set > > # CONFIG_WD80x3 is not set > > CONFIG_NET_VENDOR_NVIDIA=y > > # CONFIG_FORCEDETH is not set > > CONFIG_NET_VENDOR_OKI=y > > # CONFIG_PCH_GBE is not set > > # CONFIG_ETHOC is not set > > # CONFIG_NET_PACKET_ENGINE is not set > > CONFIG_NET_VENDOR_QLOGIC=y > > # CONFIG_QLA3XXX is not set > > # CONFIG_QLCNIC is not set > > # CONFIG_QLGE is not set > > # CONFIG_NETXEN_NIC is not set > > CONFIG_NET_VENDOR_RACAL=y > > CONFIG_NET_VENDOR_REALTEK=y > > # CONFIG_ATP is not set > > # CONFIG_8139CP is not set > > # CONFIG_8139TOO is not set > > # CONFIG_R8169 is not set > > CONFIG_NET_VENDOR_RDC=y > > # CONFIG_R6040 is not set > > CONFIG_NET_VENDOR_SEEQ=y > > # CONFIG_SEEQ8005 is not set > > CONFIG_NET_VENDOR_SILAN=y > > # CONFIG_SC92031 is not set > > CONFIG_NET_VENDOR_SIS=y > > # CONFIG_SIS900 is not set > > # CONFIG_SIS190 is not set > > # CONFIG_SFC is not set > > CONFIG_NET_VENDOR_SMSC=y > > # CONFIG_SMC9194 is not set > > # CONFIG_EPIC100 is not set > > # CONFIG_SMSC9420 is not set > > CONFIG_NET_VENDOR_STMICRO=y > > # CONFIG_STMMAC_ETH is not set > > CONFIG_NET_VENDOR_SUN=y > > # CONFIG_HAPPYMEAL is not set > > # CONFIG_SUNGEM is not set > > # CONFIG_CASSINI is not set > > # CONFIG_NIU is not set > > CONFIG_NET_VENDOR_TEHUTI=y > > # CONFIG_TEHUTI is not set > > CONFIG_NET_VENDOR_TI=y > > # CONFIG_TLAN is not set > > CONFIG_NET_VENDOR_VIA=y > > # CONFIG_VIA_RHINE is not set > > # CONFIG_VIA_VELOCITY is not set > > CONFIG_FDDI=y > > CONFIG_DEFXX=m > > # CONFIG_DEFXX_MMIO is not set > > CONFIG_SKFP=m > > # CONFIG_HIPPI is not set > > CONFIG_NET_SB1000=m > > CONFIG_PHYLIB=y > > > > # > > # MII PHY device drivers > > # > > CONFIG_MARVELL_PHY=m > > CONFIG_DAVICOM_PHY=m > > CONFIG_QSEMI_PHY=m > > CONFIG_LXT_PHY=m > > CONFIG_CICADA_PHY=m > > CONFIG_VITESSE_PHY=m > > CONFIG_SMSC_PHY=m > > CONFIG_BROADCOM_PHY=m > > CONFIG_ICPLUS_PHY=m > > CONFIG_REALTEK_PHY=m > > CONFIG_NATIONAL_PHY=m > > CONFIG_STE10XP=m > > CONFIG_LSI_ET1011C_PHY=y > > # CONFIG_MICREL_PHY is not set > > # CONFIG_FIXED_PHY is not set > > CONFIG_MDIO_BITBANG=m > > # CONFIG_MDIO_GPIO is not set > > CONFIG_PLIP=m > > CONFIG_PPP=m > > CONFIG_PPP_BSDCOMP=m > > CONFIG_PPP_DEFLATE=m > > CONFIG_PPP_FILTER=y > > CONFIG_PPP_MPPE=m > > CONFIG_PPP_MULTILINK=y > > CONFIG_PPPOE=m > > CONFIG_PPP_ASYNC=m > > CONFIG_PPP_SYNC_TTY=m > > CONFIG_SLIP=m > > CONFIG_SLHC=m > > CONFIG_SLIP_COMPRESSED=y > > CONFIG_SLIP_SMART=y > > CONFIG_SLIP_MODE_SLIP6=y > > # CONFIG_TR is not set > > > > # > > # USB Network Adapters > > # > > # CONFIG_USB_CATC is not set > > # CONFIG_USB_KAWETH is not set > > # CONFIG_USB_PEGASUS is not set > > # CONFIG_USB_RTL8150 is not set > > # CONFIG_USB_USBNET is not set > > # CONFIG_USB_IPHETH is not set > > # CONFIG_WLAN is not set > > > > # > > # Enable WiMAX (Networking options) to see the WiMAX drivers > > # > > # CONFIG_WAN is not set > > CONFIG_XEN_NETDEV_FRONTEND=y > > CONFIG_XEN_NETDEV_BACKEND=y > > CONFIG_VMXNET3=m > > # CONFIG_ISDN is not set > > # CONFIG_PHONE is not set > > > > # > > # Input device support > > # > > CONFIG_INPUT=y > > CONFIG_INPUT_FF_MEMLESS=y > > CONFIG_INPUT_POLLDEV=y > > CONFIG_INPUT_SPARSEKMAP=m > > > > # > > # Userland interfaces > > # > > CONFIG_INPUT_MOUSEDEV=y > > # CONFIG_INPUT_MOUSEDEV_PSAUX is not set > > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > > # CONFIG_INPUT_JOYDEV is not set > > CONFIG_INPUT_EVDEV=y > > # CONFIG_INPUT_EVBUG is not set > > > > # > > # Input Device Drivers > > # > > CONFIG_INPUT_KEYBOARD=y > > CONFIG_KEYBOARD_ADP5588=y > > CONFIG_KEYBOARD_ADP5589=y > > CONFIG_KEYBOARD_ATKBD=y > > CONFIG_KEYBOARD_QT1070=y > > CONFIG_KEYBOARD_QT2160=y > > CONFIG_KEYBOARD_LKKBD=y > > CONFIG_KEYBOARD_GPIO=y > > CONFIG_KEYBOARD_GPIO_POLLED=y > > CONFIG_KEYBOARD_TCA6416=y > > CONFIG_KEYBOARD_MATRIX=y > > CONFIG_KEYBOARD_LM8323=y > > CONFIG_KEYBOARD_MAX7359=y > > CONFIG_KEYBOARD_MCS=y > > CONFIG_KEYBOARD_MPR121=y > > CONFIG_KEYBOARD_NEWTON=y > > CONFIG_KEYBOARD_OPENCORES=y > > CONFIG_KEYBOARD_STOWAWAY=y > > CONFIG_KEYBOARD_SUNKBD=y > > CONFIG_KEYBOARD_XTKBD=y > > CONFIG_INPUT_MOUSE=y > > CONFIG_MOUSE_PS2=m > > CONFIG_MOUSE_PS2_ALPS=y > > CONFIG_MOUSE_PS2_LOGIPS2PP=y > > CONFIG_MOUSE_PS2_SYNAPTICS=y > > CONFIG_MOUSE_PS2_LIFEBOOK=y > > CONFIG_MOUSE_PS2_TRACKPOINT=y > > CONFIG_MOUSE_PS2_ELANTECH=y > > CONFIG_MOUSE_PS2_SENTELIC=y > > # CONFIG_MOUSE_PS2_TOUCHKIT is not set > > CONFIG_MOUSE_SERIAL=m > > CONFIG_MOUSE_APPLETOUCH=m > > CONFIG_MOUSE_BCM5974=m > > CONFIG_MOUSE_INPORT=m > > # CONFIG_MOUSE_ATIXL is not set > > CONFIG_MOUSE_LOGIBM=m > > CONFIG_MOUSE_PC110PAD=m > > CONFIG_MOUSE_VSXXXAA=m > > # CONFIG_MOUSE_GPIO is not set > > CONFIG_MOUSE_SYNAPTICS_I2C=m > > CONFIG_INPUT_JOYSTICK=y > > CONFIG_JOYSTICK_ANALOG=m > > CONFIG_JOYSTICK_A3D=m > > CONFIG_JOYSTICK_ADI=m > > CONFIG_JOYSTICK_COBRA=m > > CONFIG_JOYSTICK_GF2K=m > > CONFIG_JOYSTICK_GRIP=m > > CONFIG_JOYSTICK_GRIP_MP=m > > CONFIG_JOYSTICK_GUILLEMOT=m > > CONFIG_JOYSTICK_INTERACT=m > > # CONFIG_JOYSTICK_SIDEWINDER is not set > > CONFIG_JOYSTICK_TMDC=m > > CONFIG_JOYSTICK_IFORCE=m > > # CONFIG_JOYSTICK_IFORCE_USB is not set > > CONFIG_JOYSTICK_IFORCE_232=y > > CONFIG_JOYSTICK_WARRIOR=m > > CONFIG_JOYSTICK_MAGELLAN=m > > CONFIG_JOYSTICK_SPACEORB=m > > CONFIG_JOYSTICK_SPACEBALL=m > > CONFIG_JOYSTICK_STINGER=m > > CONFIG_JOYSTICK_TWIDJOY=m > > CONFIG_JOYSTICK_ZHENHUA=m > > CONFIG_JOYSTICK_DB9=m > > CONFIG_JOYSTICK_GAMECON=m > > CONFIG_JOYSTICK_TURBOGRAFX=m > > # CONFIG_JOYSTICK_AS5011 is not set > > CONFIG_JOYSTICK_JOYDUMP=m > > CONFIG_JOYSTICK_XPAD=m > > CONFIG_JOYSTICK_XPAD_FF=y > > CONFIG_JOYSTICK_XPAD_LEDS=y > > CONFIG_JOYSTICK_WALKERA0701=m > > # CONFIG_INPUT_TABLET is not set > > # CONFIG_INPUT_TOUCHSCREEN is not set > > CONFIG_INPUT_MISC=y > > # CONFIG_INPUT_AD714X is not set > > # CONFIG_INPUT_BMA150 is not set > > # CONFIG_INPUT_PCSPKR is not set > > # CONFIG_INPUT_MMA8450 is not set > > # CONFIG_INPUT_MPU3050 is not set > > # CONFIG_INPUT_APANEL is not set > > # CONFIG_INPUT_WISTRON_BTNS is not set > > # CONFIG_INPUT_ATLAS_BTNS is not set > > # CONFIG_INPUT_ATI_REMOTE2 is not set > > # CONFIG_INPUT_KEYSPAN_REMOTE is not set > > # CONFIG_INPUT_KXTJ9 is not set > > # CONFIG_INPUT_POWERMATE is not set > > # CONFIG_INPUT_YEALINK is not set > > # CONFIG_INPUT_CM109 is not set > > CONFIG_INPUT_UINPUT=y > > # CONFIG_INPUT_PCF8574 is not set > > # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set > > # CONFIG_INPUT_ADXL34X is not set > > # CONFIG_INPUT_CMA3000 is not set > > CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y > > > > # > > # Hardware I/O ports > > # > > CONFIG_SERIO=y > > CONFIG_SERIO_I8042=y > > CONFIG_SERIO_SERPORT=m > > CONFIG_SERIO_CT82C710=m > > CONFIG_SERIO_PARKBD=m > > CONFIG_SERIO_PCIPS2=m > > CONFIG_SERIO_LIBPS2=y > > CONFIG_SERIO_RAW=m > > # CONFIG_SERIO_ALTERA_PS2 is not set > > # CONFIG_SERIO_PS2MULT is not set > > CONFIG_GAMEPORT=m > > CONFIG_GAMEPORT_NS558=m > > CONFIG_GAMEPORT_L4=m > > CONFIG_GAMEPORT_EMU10K1=m > > CONFIG_GAMEPORT_FM801=m > > > > # > > # Character devices > > # > > CONFIG_VT=y > > CONFIG_CONSOLE_TRANSLATIONS=y > > CONFIG_VT_CONSOLE=y > > CONFIG_VT_CONSOLE_SLEEP=y > > CONFIG_HW_CONSOLE=y > > CONFIG_VT_HW_CONSOLE_BINDING=y > > CONFIG_UNIX98_PTYS=y > > CONFIG_DEVPTS_MULTIPLE_INSTANCES=y > > # CONFIG_LEGACY_PTYS is not set > > CONFIG_SERIAL_NONSTANDARD=y > > # CONFIG_ROCKETPORT is not set > > # CONFIG_CYCLADES is not set > > # CONFIG_MOXA_INTELLIO is not set > > # CONFIG_MOXA_SMARTIO is not set > > # CONFIG_SYNCLINK is not set > > # CONFIG_SYNCLINKMP is not set > > # CONFIG_SYNCLINK_GT is not set > > # CONFIG_NOZOMI is not set > > # CONFIG_ISI is not set > > # CONFIG_N_HDLC is not set > > # CONFIG_N_GSM is not set > > # CONFIG_TRACE_SINK is not set > > # CONFIG_DEVKMEM is not set > > # CONFIG_STALDRV is not set > > > > # > > # Serial drivers > > # > > CONFIG_SERIAL_8250=y > > CONFIG_SERIAL_8250_CONSOLE=y > > CONFIG_FIX_EARLYCON_MEM=y > > CONFIG_SERIAL_8250_PCI=y > > CONFIG_SERIAL_8250_PNP=y > > CONFIG_SERIAL_8250_NR_UARTS=32 > > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > > CONFIG_SERIAL_8250_EXTENDED=y > > CONFIG_SERIAL_8250_MANY_PORTS=y > > CONFIG_SERIAL_8250_FOURPORT=m > > # CONFIG_SERIAL_8250_ACCENT is not set > > # CONFIG_SERIAL_8250_BOCA is not set > > # CONFIG_SERIAL_8250_EXAR_ST16C554 is not set > > CONFIG_SERIAL_8250_HUB6=y > > CONFIG_SERIAL_8250_SHARE_IRQ=y > > CONFIG_SERIAL_8250_DETECT_IRQ=y > > CONFIG_SERIAL_8250_RSA=y > > > > # > > # Non-8250 serial port support > > # > > # CONFIG_SERIAL_MFD_HSU is not set > > CONFIG_SERIAL_CORE=y > > CONFIG_SERIAL_CORE_CONSOLE=y > > CONFIG_CONSOLE_POLL=y > > CONFIG_SERIAL_JSM=m > > # CONFIG_SERIAL_TIMBERDALE is not set > > # CONFIG_SERIAL_ALTERA_JTAGUART is not set > > # CONFIG_SERIAL_ALTERA_UART is not set > > # CONFIG_SERIAL_PCH_UART is not set > > # CONFIG_SERIAL_XILINX_PS_UART is not set > > # CONFIG_PRINTER is not set > > CONFIG_PPDEV=m > > CONFIG_HVC_DRIVER=y > > CONFIG_HVC_IRQ=y > > CONFIG_HVC_XEN=y > > CONFIG_IPMI_HANDLER=m > > # CONFIG_IPMI_PANIC_EVENT is not set > > CONFIG_IPMI_DEVICE_INTERFACE=m > > CONFIG_IPMI_SI=m > > CONFIG_IPMI_WATCHDOG=m > > CONFIG_IPMI_POWEROFF=m > > CONFIG_HW_RANDOM=y > > CONFIG_HW_RANDOM_TIMERIOMEM=y > > CONFIG_HW_RANDOM_INTEL=y > > CONFIG_HW_RANDOM_AMD=y > > CONFIG_HW_RANDOM_GEODE=y > > CONFIG_HW_RANDOM_VIA=y > > CONFIG_NVRAM=y > > # CONFIG_DTLK is not set > > # CONFIG_R3964 is not set > > # CONFIG_APPLICOM is not set > > # CONFIG_SONYPI is not set > > # CONFIG_MWAVE is not set > > # CONFIG_SCx200_GPIO is not set > > # CONFIG_PC8736x_GPIO is not set > > # CONFIG_NSC_GPIO is not set > > CONFIG_RAW_DRIVER=y > > CONFIG_MAX_RAW_DEVS=256 > > CONFIG_HPET=y > > CONFIG_HPET_MMAP=y > > CONFIG_HANGCHECK_TIMER=m > > # CONFIG_TCG_TPM is not set > > CONFIG_TELCLOCK=y > > CONFIG_DEVPORT=y > > CONFIG_RAMOOPS=m > > CONFIG_I2C=y > > CONFIG_I2C_BOARDINFO=y > > # CONFIG_I2C_COMPAT is not set > > # CONFIG_I2C_CHARDEV is not set > > # CONFIG_I2C_MUX is not set > > # CONFIG_I2C_HELPER_AUTO is not set > > CONFIG_I2C_SMBUS=m > > > > # > > # I2C Algorithms > > # > > CONFIG_I2C_ALGOBIT=m > > # CONFIG_I2C_ALGOPCF is not set > > CONFIG_I2C_ALGOPCA=m > > > > # > > # I2C Hardware Bus support > > # > > > > # > > # PC SMBus host controller drivers > > # > > # CONFIG_I2C_ALI1535 is not set > > # CONFIG_I2C_ALI1563 is not set > > # CONFIG_I2C_ALI15X3 is not set > > # CONFIG_I2C_AMD756 is not set > > # CONFIG_I2C_AMD8111 is not set > > CONFIG_I2C_I801=m > > CONFIG_I2C_ISCH=m > > CONFIG_I2C_PIIX4=m > > CONFIG_I2C_NFORCE2=m > > CONFIG_I2C_NFORCE2_S4985=m > > # CONFIG_I2C_SIS5595 is not set > > # CONFIG_I2C_SIS630 is not set > > # CONFIG_I2C_SIS96X is not set > > CONFIG_I2C_VIA=m > > CONFIG_I2C_VIAPRO=m > > > > # > > # ACPI drivers > > # > > CONFIG_I2C_SCMI=m > > > > # > > # I2C system bus drivers (mostly embedded / system-on-chip) > > # > > # CONFIG_I2C_DESIGNWARE_PCI is not set > > # CONFIG_I2C_GPIO is not set > > # CONFIG_I2C_INTEL_MID is not set > > CONFIG_I2C_OCORES=m > > CONFIG_I2C_PCA_PLATFORM=m > > # CONFIG_I2C_PXA_PCI is not set > > CONFIG_I2C_SIMTEC=m > > # CONFIG_I2C_XILINX is not set > > # CONFIG_I2C_EG20T is not set > > > > # > > # External I2C/SMBus adapter drivers > > # > > # CONFIG_I2C_DIOLAN_U2C is not set > > CONFIG_I2C_PARPORT=m > > CONFIG_I2C_PARPORT_LIGHT=m > > CONFIG_I2C_TAOS_EVM=m > > # CONFIG_I2C_TINY_USB is not set > > > > # > > # Other I2C/SMBus bus drivers > > # > > CONFIG_I2C_PCA_ISA=m > > CONFIG_I2C_STUB=m > > CONFIG_SCx200_ACB=m > > # CONFIG_I2C_DEBUG_CORE is not set > > # CONFIG_I2C_DEBUG_ALGO is not set > > # CONFIG_I2C_DEBUG_BUS is not set > > # CONFIG_SPI is not set > > > > # > > # PPS support > > # > > # CONFIG_PPS is not set > > > > # > > # PPS generators support > > # > > > > # > > # PTP clock support > > # > > > > # > > # Enable Device Drivers -> PPS to see the PTP clock options. > > # > > CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y > > CONFIG_GPIOLIB=y > > # CONFIG_DEBUG_GPIO is not set > > # CONFIG_GPIO_SYSFS is not set > > > > # > > # Memory mapped GPIO drivers: > > # > > # CONFIG_GPIO_GENERIC_PLATFORM is not set > > # CONFIG_GPIO_IT8761E is not set > > # CONFIG_GPIO_SCH is not set > > # CONFIG_GPIO_VX855 is not set > > > > # > > # I2C GPIO expanders: > > # > > # CONFIG_GPIO_MAX7300 is not set > > # CONFIG_GPIO_MAX732X is not set > > # CONFIG_GPIO_PCA953X is not set > > # CONFIG_GPIO_PCF857X is not set > > # CONFIG_GPIO_SX150X is not set > > # CONFIG_GPIO_ADP5588 is not set > > > > # > > # PCI GPIO expanders: > > # > > # CONFIG_GPIO_BT8XX is not set > > # CONFIG_GPIO_LANGWELL is not set > > # CONFIG_GPIO_PCH is not set > > # CONFIG_GPIO_ML_IOH is not set > > # CONFIG_GPIO_RDC321X is not set > > > > # > > # SPI GPIO expanders: > > # > > # CONFIG_GPIO_MCP23S08 is not set > > > > # > > # AC97 GPIO expanders: > > # > > > > # > > # MODULbus GPIO expanders: > > # > > # CONFIG_W1 is not set > > CONFIG_POWER_SUPPLY=y > > # CONFIG_POWER_SUPPLY_DEBUG is not set > > CONFIG_PDA_POWER=m > > # CONFIG_TEST_POWER is not set > > # CONFIG_BATTERY_DS2780 is not set > > # CONFIG_BATTERY_DS2782 is not set > > # CONFIG_BATTERY_BQ20Z75 is not set > > # CONFIG_BATTERY_BQ27x00 is not set > > # CONFIG_BATTERY_MAX17040 is not set > > # CONFIG_BATTERY_MAX17042 is not set > > # CONFIG_CHARGER_MAX8903 is not set > > # CONFIG_CHARGER_GPIO is not set > > CONFIG_HWMON=m > > CONFIG_HWMON_VID=m > > # CONFIG_HWMON_DEBUG_CHIP is not set > > > > # > > # Native drivers > > # > > # CONFIG_SENSORS_ABITUGURU is not set > > # CONFIG_SENSORS_ABITUGURU3 is not set > > # CONFIG_SENSORS_AD7414 is not set > > # CONFIG_SENSORS_AD7418 is not set > > # CONFIG_SENSORS_ADM1021 is not set > > # CONFIG_SENSORS_ADM1025 is not set > > # CONFIG_SENSORS_ADM1026 is not set > > # CONFIG_SENSORS_ADM1029 is not set > > # CONFIG_SENSORS_ADM1031 is not set > > # CONFIG_SENSORS_ADM9240 is not set > > # CONFIG_SENSORS_ADT7411 is not set > > # CONFIG_SENSORS_ADT7462 is not set > > # CONFIG_SENSORS_ADT7470 is not set > > # CONFIG_SENSORS_ADT7475 is not set > > # CONFIG_SENSORS_ASC7621 is not set > > CONFIG_SENSORS_K8TEMP=m > > CONFIG_SENSORS_K10TEMP=m > > # CONFIG_SENSORS_FAM15H_POWER is not set > > # CONFIG_SENSORS_ASB100 is not set > > CONFIG_SENSORS_ATXP1=m > > # CONFIG_SENSORS_DS620 is not set > > CONFIG_SENSORS_DS1621=m > > CONFIG_SENSORS_I5K_AMB=m > > CONFIG_SENSORS_F71805F=m > > CONFIG_SENSORS_F71882FG=m > > CONFIG_SENSORS_F75375S=m > > CONFIG_SENSORS_FSCHMD=m > > CONFIG_SENSORS_G760A=m > > CONFIG_SENSORS_GL518SM=m > > CONFIG_SENSORS_GL520SM=m > > # CONFIG_SENSORS_GPIO_FAN is not set > > CONFIG_SENSORS_CORETEMP=m > > # CONFIG_SENSORS_IBMAEM is not set > > # CONFIG_SENSORS_IBMPEX is not set > > CONFIG_SENSORS_IT87=m > > # CONFIG_SENSORS_JC42 is not set > > # CONFIG_SENSORS_LINEAGE is not set > > CONFIG_SENSORS_LM63=m > > # CONFIG_SENSORS_LM73 is not set > > CONFIG_SENSORS_LM75=m > > CONFIG_SENSORS_LM77=m > > CONFIG_SENSORS_LM78=m > > CONFIG_SENSORS_LM80=m > > CONFIG_SENSORS_LM83=m > > CONFIG_SENSORS_LM85=m > > CONFIG_SENSORS_LM87=m > > CONFIG_SENSORS_LM90=m > > CONFIG_SENSORS_LM92=m > > CONFIG_SENSORS_LM93=m > > # CONFIG_SENSORS_LTC4151 is not set > > CONFIG_SENSORS_LTC4215=m > > CONFIG_SENSORS_LTC4245=m > > # CONFIG_SENSORS_LTC4261 is not set > > CONFIG_SENSORS_LM95241=m > > # CONFIG_SENSORS_LM95245 is not set > > # CONFIG_SENSORS_MAX16065 is not set > > CONFIG_SENSORS_MAX1619=m > > # CONFIG_SENSORS_MAX1668 is not set > > # CONFIG_SENSORS_MAX6639 is not set > > # CONFIG_SENSORS_MAX6642 is not set > > CONFIG_SENSORS_MAX6650=m > > # CONFIG_SENSORS_NTC_THERMISTOR is not set > > CONFIG_SENSORS_PC87360=m > > CONFIG_SENSORS_PC87427=m > > CONFIG_SENSORS_PCF8591=m > > # CONFIG_PMBUS is not set > > # CONFIG_SENSORS_SHT15 is not set > > # CONFIG_SENSORS_SHT21 is not set > > CONFIG_SENSORS_SIS5595=m > > # CONFIG_SENSORS_SMM665 is not set > > CONFIG_SENSORS_DME1737=m > > # CONFIG_SENSORS_EMC1403 is not set > > # CONFIG_SENSORS_EMC2103 is not set > > # CONFIG_SENSORS_EMC6W201 is not set > > CONFIG_SENSORS_SMSC47M1=m > > CONFIG_SENSORS_SMSC47M192=m > > CONFIG_SENSORS_SMSC47B397=m > > # CONFIG_SENSORS_SCH56XX_COMMON is not set > > # CONFIG_SENSORS_SCH5627 is not set > > # CONFIG_SENSORS_SCH5636 is not set > > # CONFIG_SENSORS_ADS1015 is not set > > CONFIG_SENSORS_ADS7828=m > > # CONFIG_SENSORS_AMC6821 is not set > > CONFIG_SENSORS_THMC50=m > > # CONFIG_SENSORS_TMP102 is not set > > CONFIG_SENSORS_TMP401=m > > CONFIG_SENSORS_TMP421=m > > CONFIG_SENSORS_VIA_CPUTEMP=m > > CONFIG_SENSORS_VIA686A=m > > CONFIG_SENSORS_VT1211=m > > CONFIG_SENSORS_VT8231=m > > CONFIG_SENSORS_W83781D=m > > CONFIG_SENSORS_W83791D=m > > CONFIG_SENSORS_W83792D=m > > CONFIG_SENSORS_W83793=m > > # CONFIG_SENSORS_W83795 is not set > > CONFIG_SENSORS_W83L785TS=m > > CONFIG_SENSORS_W83L786NG=m > > CONFIG_SENSORS_W83627HF=m > > CONFIG_SENSORS_W83627EHF=m > > CONFIG_SENSORS_APPLESMC=m > > > > # > > # ACPI drivers > > # > > # CONFIG_SENSORS_ACPI_POWER is not set > > CONFIG_SENSORS_ATK0110=m > > CONFIG_THERMAL=m > > CONFIG_THERMAL_HWMON=y > > CONFIG_WATCHDOG=y > > # CONFIG_WATCHDOG_CORE is not set > > # CONFIG_WATCHDOG_NOWAYOUT is not set > > > > # > > # Watchdog Device Drivers > > # > > CONFIG_SOFT_WATCHDOG=y > > CONFIG_ACQUIRE_WDT=m > > CONFIG_ADVANTECH_WDT=m > > CONFIG_ALIM1535_WDT=m > > CONFIG_ALIM7101_WDT=m > > CONFIG_F71808E_WDT=m > > # CONFIG_SP5100_TCO is not set > > CONFIG_SC520_WDT=y > > # CONFIG_SBC_FITPC2_WATCHDOG is not set > > CONFIG_EUROTECH_WDT=m > > CONFIG_IB700_WDT=m > > # CONFIG_IBMASR is not set > > CONFIG_WAFER_WDT=m > > CONFIG_I6300ESB_WDT=m > > CONFIG_ITCO_WDT=m > > CONFIG_ITCO_VENDOR_SUPPORT=y > > CONFIG_IT8712F_WDT=m > > CONFIG_IT87_WDT=m > > # CONFIG_HP_WATCHDOG is not set > > CONFIG_SC1200_WDT=m > > CONFIG_SCx200_WDT=m > > CONFIG_PC87413_WDT=m > > # CONFIG_NV_TCO is not set > > CONFIG_60XX_WDT=m > > CONFIG_SBC8360_WDT=m > > CONFIG_SBC7240_WDT=m > > CONFIG_CPU5_WDT=m > > CONFIG_SMSC_SCH311X_WDT=m > > CONFIG_SMSC37B787_WDT=m > > CONFIG_W83627HF_WDT=m > > CONFIG_W83697HF_WDT=m > > CONFIG_W83697UG_WDT=m > > CONFIG_W83877F_WDT=m > > CONFIG_W83977F_WDT=m > > CONFIG_MACHZ_WDT=m > > # CONFIG_SBC_EPX_C3_WATCHDOG is not set > > CONFIG_XEN_WDT=y > > > > # > > # ISA-based Watchdog Cards > > # > > # CONFIG_PCWATCHDOG is not set > > CONFIG_MIXCOMWD=m > > CONFIG_WDT=m > > > > # > > # PCI-based Watchdog Cards > > # > > # CONFIG_PCIPCWATCHDOG is not set > > CONFIG_WDTPCI=m > > > > # > > # USB-based Watchdog Cards > > # > > # CONFIG_USBPCWATCHDOG is not set > > CONFIG_SSB_POSSIBLE=y > > > > # > > # Sonics Silicon Backplane > > # > > CONFIG_SSB=y > > CONFIG_SSB_SPROM=y > > CONFIG_SSB_PCIHOST_POSSIBLE=y > > CONFIG_SSB_PCIHOST=y > > # CONFIG_SSB_B43_PCI_BRIDGE is not set > > # CONFIG_SSB_DEBUG is not set > > CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y > > CONFIG_SSB_DRIVER_PCICORE=y > > CONFIG_BCMA_POSSIBLE=y > > > > # > > # Broadcom specific AMBA > > # > > # CONFIG_BCMA is not set > > > > # > > # Multifunction device drivers > > # > > CONFIG_MFD_CORE=m > > # CONFIG_MFD_88PM860X is not set > > # CONFIG_MFD_SM501 is not set > > # CONFIG_HTC_PASIC3 is not set > > # CONFIG_HTC_I2CPLD is not set > > # CONFIG_TPS6105X is not set > > # CONFIG_TPS65010 is not set > > # CONFIG_TPS6507X is not set > > # CONFIG_MFD_TPS6586X is not set > > # CONFIG_MFD_TPS65910 is not set > > # CONFIG_MFD_TPS65912_I2C is not set > > # CONFIG_TWL4030_CORE is not set > > # CONFIG_MFD_STMPE is not set > > # CONFIG_MFD_TC3589X is not set > > # CONFIG_MFD_TMIO is not set > > # CONFIG_PMIC_DA903X is not set > > # CONFIG_PMIC_ADP5520 is not set > > # CONFIG_MFD_MAX8925 is not set > > # CONFIG_MFD_MAX8997 is not set > > # CONFIG_MFD_MAX8998 is not set > > # CONFIG_MFD_WM8400 is not set > > # CONFIG_MFD_WM831X_I2C is not set > > # CONFIG_MFD_WM8350_I2C is not set > > # CONFIG_MFD_WM8994 is not set > > # CONFIG_MFD_PCF50633 is not set > > # CONFIG_ABX500_CORE is not set > > # CONFIG_MFD_CS5535 is not set > > # CONFIG_MFD_TIMBERDALE is not set > > CONFIG_LPC_SCH=m > > # CONFIG_MFD_RDC321X is not set > > # CONFIG_MFD_JANZ_CMODIO is not set > > # CONFIG_MFD_VX855 is not set > > # CONFIG_MFD_WL1273_CORE is not set > > # CONFIG_MFD_AAT2870_CORE is not set > > # CONFIG_REGULATOR is not set > > # CONFIG_MEDIA_SUPPORT is not set > > > > # > > # Graphics support > > # > > CONFIG_AGP=y > > CONFIG_AGP_ALI=y > > CONFIG_AGP_ATI=y > > CONFIG_AGP_AMD=y > > CONFIG_AGP_AMD64=y > > CONFIG_AGP_INTEL=y > > CONFIG_AGP_NVIDIA=y > > CONFIG_AGP_SIS=y > > CONFIG_AGP_SWORKS=y > > CONFIG_AGP_VIA=y > > CONFIG_AGP_EFFICEON=y > > CONFIG_VGA_ARB=y > > CONFIG_VGA_ARB_MAX_GPUS=16 > > # CONFIG_VGA_SWITCHEROO is not set > > CONFIG_DRM=m > > # CONFIG_DRM_TDFX is not set > > # CONFIG_DRM_R128 is not set > > # CONFIG_DRM_RADEON is not set > > # CONFIG_DRM_I810 is not set > > # CONFIG_DRM_I915 is not set > > CONFIG_DRM_MGA=m > > # CONFIG_DRM_SIS is not set > > # CONFIG_DRM_VIA is not set > > # CONFIG_DRM_SAVAGE is not set > > # CONFIG_DRM_VMWGFX is not set > > # CONFIG_STUB_POULSBO is not set > > CONFIG_VGASTATE=m > > # CONFIG_VIDEO_OUTPUT_CONTROL is not set > > CONFIG_FB=y > > CONFIG_FIRMWARE_EDID=y > > CONFIG_FB_DDC=m > > CONFIG_FB_BOOT_VESA_SUPPORT=y > > CONFIG_FB_CFB_FILLRECT=y > > CONFIG_FB_CFB_COPYAREA=y > > CONFIG_FB_CFB_IMAGEBLIT=y > > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set > > CONFIG_FB_SYS_FILLRECT=y > > CONFIG_FB_SYS_COPYAREA=y > > CONFIG_FB_SYS_IMAGEBLIT=y > > # CONFIG_FB_FOREIGN_ENDIAN is not set > > CONFIG_FB_SYS_FOPS=y > > # CONFIG_FB_WMT_GE_ROPS is not set > > CONFIG_FB_DEFERRED_IO=y > > CONFIG_FB_HECUBA=m > > CONFIG_FB_SVGALIB=m > > # CONFIG_FB_MACMODES is not set > > CONFIG_FB_BACKLIGHT=y > > CONFIG_FB_MODE_HELPERS=y > > CONFIG_FB_TILEBLITTING=y > > > > # > > # Frame buffer hardware drivers > > # > > CONFIG_FB_CIRRUS=m > > CONFIG_FB_PM2=m > > CONFIG_FB_PM2_FIFO_DISCONNECT=y > > CONFIG_FB_CYBER2000=m > > CONFIG_FB_CYBER2000_DDC=y > > CONFIG_FB_ARC=m > > # CONFIG_FB_ASILIANT is not set > > # CONFIG_FB_IMSTT is not set > > CONFIG_FB_VGA16=m > > CONFIG_FB_UVESA=m > > CONFIG_FB_VESA=y > > CONFIG_FB_N411=m > > CONFIG_FB_HGA=m > > CONFIG_FB_S1D13XXX=m > > CONFIG_FB_NVIDIA=m > > CONFIG_FB_NVIDIA_I2C=y > > # CONFIG_FB_NVIDIA_DEBUG is not set > > CONFIG_FB_NVIDIA_BACKLIGHT=y > > # CONFIG_FB_RIVA is not set > > CONFIG_FB_I810=m > > # CONFIG_FB_I810_GTF is not set > > CONFIG_FB_LE80578=m > > CONFIG_FB_CARILLO_RANCH=m > > CONFIG_FB_MATROX=m > > CONFIG_FB_MATROX_MILLENIUM=y > > CONFIG_FB_MATROX_MYSTIQUE=y > > CONFIG_FB_MATROX_G=y > > CONFIG_FB_MATROX_I2C=m > > CONFIG_FB_MATROX_MAVEN=m > > CONFIG_FB_RADEON=m > > CONFIG_FB_RADEON_I2C=y > > CONFIG_FB_RADEON_BACKLIGHT=y > > # CONFIG_FB_RADEON_DEBUG is not set > > CONFIG_FB_ATY128=m > > CONFIG_FB_ATY128_BACKLIGHT=y > > CONFIG_FB_ATY=m > > CONFIG_FB_ATY_CT=y > > CONFIG_FB_ATY_GENERIC_LCD=y > > CONFIG_FB_ATY_GX=y > > CONFIG_FB_ATY_BACKLIGHT=y > > CONFIG_FB_S3=m > > CONFIG_FB_S3_DDC=y > > CONFIG_FB_SAVAGE=m > > CONFIG_FB_SAVAGE_I2C=y > > # CONFIG_FB_SAVAGE_ACCEL is not set > > CONFIG_FB_SIS=m > > CONFIG_FB_SIS_300=y > > CONFIG_FB_SIS_315=y > > CONFIG_FB_VIA=m > > # CONFIG_FB_VIA_DIRECT_PROCFS is not set > > # CONFIG_FB_VIA_X_COMPATIBILITY is not set > > CONFIG_FB_NEOMAGIC=m > > CONFIG_FB_KYRO=m > > CONFIG_FB_3DFX=m > > # CONFIG_FB_3DFX_ACCEL is not set > > CONFIG_FB_3DFX_I2C=y > > CONFIG_FB_VOODOO1=m > > CONFIG_FB_VT8623=m > > # CONFIG_FB_TRIDENT is not set > > CONFIG_FB_ARK=m > > CONFIG_FB_PM3=m > > # CONFIG_FB_CARMINE is not set > > CONFIG_FB_GEODE=y > > CONFIG_FB_GEODE_LX=m > > CONFIG_FB_GEODE_GX=m > > CONFIG_FB_GEODE_GX1=m > > # CONFIG_FB_TMIO is not set > > # CONFIG_FB_SMSCUFX is not set > > # CONFIG_FB_UDL is not set > > CONFIG_FB_VIRTUAL=m > > CONFIG_XEN_FBDEV_FRONTEND=y > > CONFIG_FB_METRONOME=m > > CONFIG_FB_MB862XX=m > > CONFIG_FB_MB862XX_PCI_GDC=y > > CONFIG_FB_MB862XX_I2C=y > > # CONFIG_FB_BROADSHEET is not set > > CONFIG_BACKLIGHT_LCD_SUPPORT=y > > # CONFIG_LCD_CLASS_DEVICE is not set > > CONFIG_BACKLIGHT_CLASS_DEVICE=y > > # CONFIG_BACKLIGHT_GENERIC is not set > > # CONFIG_BACKLIGHT_PROGEAR is not set > > # CONFIG_BACKLIGHT_APPLE is not set > > # CONFIG_BACKLIGHT_SAHARA is not set > > # CONFIG_BACKLIGHT_ADP8860 is not set > > # CONFIG_BACKLIGHT_ADP8870 is not set > > > > # > > # Display device support > > # > > # CONFIG_DISPLAY_SUPPORT is not set > > > > # > > # Console display driver support > > # > > CONFIG_VGA_CONSOLE=y > > CONFIG_VGACON_SOFT_SCROLLBACK=y > > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 > > # CONFIG_MDA_CONSOLE is not set > > CONFIG_DUMMY_CONSOLE=y > > CONFIG_FRAMEBUFFER_CONSOLE=y > > CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y > > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > > # CONFIG_FONTS is not set > > CONFIG_FONT_8x8=y > > CONFIG_FONT_8x16=y > > # CONFIG_LOGO is not set > > # CONFIG_SOUND is not set > > # CONFIG_HID_SUPPORT is not set > > CONFIG_USB_SUPPORT=y > > CONFIG_USB_COMMON=y > > CONFIG_USB_ARCH_HAS_HCD=y > > CONFIG_USB_ARCH_HAS_OHCI=y > > CONFIG_USB_ARCH_HAS_EHCI=y > > CONFIG_USB_ARCH_HAS_XHCI=y > > CONFIG_USB=y > > # CONFIG_USB_DEBUG is not set > > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > > > > # > > # Miscellaneous USB options > > # > > # CONFIG_USB_DEVICEFS is not set > > CONFIG_USB_DEVICE_CLASS=y > > CONFIG_USB_DYNAMIC_MINORS=y > > CONFIG_USB_SUSPEND=y > > # CONFIG_USB_OTG is not set > > # CONFIG_USB_DWC3 is not set > > # CONFIG_USB_MON is not set > > CONFIG_USB_WUSB=y > > # CONFIG_USB_WUSB_CBAF is not set > > > > # > > # USB Host Controller Drivers > > # > > # CONFIG_USB_C67X00_HCD is not set > > # CONFIG_USB_XHCI_HCD is not set > > CONFIG_USB_EHCI_HCD=y > > CONFIG_USB_EHCI_ROOT_HUB_TT=y > > # CONFIG_USB_EHCI_TT_NEWSCHED is not set > > # CONFIG_USB_OXU210HP_HCD is not set > > # CONFIG_USB_ISP116X_HCD is not set > > # CONFIG_USB_ISP1760_HCD is not set > > # CONFIG_USB_ISP1362_HCD is not set > > CONFIG_USB_OHCI_HCD=y > > # CONFIG_USB_OHCI_HCD_SSB is not set > > # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set > > # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set > > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > > CONFIG_USB_UHCI_HCD=y > > # CONFIG_USB_SL811_HCD is not set > > CONFIG_USB_R8A66597_HCD=y > > # CONFIG_USB_WHCI_HCD is not set > > # CONFIG_USB_HWA_HCD is not set > > > > # > > # USB Device Class drivers > > # > > # CONFIG_USB_ACM is not set > > # CONFIG_USB_PRINTER is not set > > # CONFIG_USB_WDM is not set > > # CONFIG_USB_TMC is not set > > > > # > > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may > > # > > > > # > > # also be needed; see USB_STORAGE Help for more info > > # > > # CONFIG_USB_STORAGE is not set > > # CONFIG_USB_UAS is not set > > # CONFIG_USB_LIBUSUAL is not set > > > > # > > # USB Imaging devices > > # > > # CONFIG_USB_MDC800 is not set > > # CONFIG_USB_MICROTEK is not set > > > > # > > # USB port drivers > > # > > # CONFIG_USB_USS720 is not set > > # CONFIG_USB_SERIAL is not set > > > > # > > # USB Miscellaneous drivers > > # > > # CONFIG_USB_EMI62 is not set > > # CONFIG_USB_EMI26 is not set > > # CONFIG_USB_ADUTUX is not set > > # CONFIG_USB_SEVSEG is not set > > # CONFIG_USB_RIO500 is not set > > # CONFIG_USB_LEGOTOWER is not set > > # CONFIG_USB_LCD is not set > > # CONFIG_USB_LED is not set > > # CONFIG_USB_CYPRESS_CY7C63 is not set > > # CONFIG_USB_CYTHERM is not set > > # CONFIG_USB_IDMOUSE is not set > > # CONFIG_USB_FTDI_ELAN is not set > > # CONFIG_USB_APPLEDISPLAY is not set > > # CONFIG_USB_SISUSBVGA is not set > > # CONFIG_USB_LD is not set > > # CONFIG_USB_TRANCEVIBRATOR is not set > > # CONFIG_USB_IOWARRIOR is not set > > # CONFIG_USB_TEST is not set > > # CONFIG_USB_ISIGHTFW is not set > > # CONFIG_USB_YUREX is not set > > # CONFIG_USB_GADGET is not set > > > > # > > # OTG and related infrastructure > > # > > # CONFIG_USB_GPIO_VBUS is not set > > # CONFIG_NOP_USB_XCEIV is not set > > CONFIG_UWB=y > > CONFIG_UWB_HWA=y > > CONFIG_UWB_WHCI=m > > # CONFIG_UWB_I1480U is not set > > # CONFIG_MMC is not set > > # CONFIG_MEMSTICK is not set > > CONFIG_NEW_LEDS=y > > CONFIG_LEDS_CLASS=y > > > > # > > # LED drivers > > # > > # CONFIG_LEDS_LM3530 is not set > > # CONFIG_LEDS_PCA9532 is not set > > # CONFIG_LEDS_GPIO is not set > > # CONFIG_LEDS_LP3944 is not set > > # CONFIG_LEDS_LP5521 is not set > > # CONFIG_LEDS_LP5523 is not set > > # CONFIG_LEDS_CLEVO_MAIL is not set > > # CONFIG_LEDS_PCA955X is not set > > # CONFIG_LEDS_BD2802 is not set > > # CONFIG_LEDS_INTEL_SS4200 is not set > > # CONFIG_LEDS_LT3593 is not set > > CONFIG_LEDS_DELL_NETBOOKS=m > > CONFIG_LEDS_TRIGGERS=y > > > > # > > # LED Triggers > > # > > # CONFIG_LEDS_TRIGGER_TIMER is not set > > # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set > > # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set > > # CONFIG_LEDS_TRIGGER_GPIO is not set > > # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set > > > > # > > # iptables trigger is under Netfilter config (LED target) > > # > > # CONFIG_ACCESSIBILITY is not set > > # CONFIG_INFINIBAND is not set > > # CONFIG_EDAC is not set > > CONFIG_RTC_LIB=y > > CONFIG_RTC_CLASS=y > > CONFIG_RTC_HCTOSYS=y > > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > > # CONFIG_RTC_DEBUG is not set > > > > # > > # RTC interfaces > > # > > CONFIG_RTC_INTF_SYSFS=y > > CONFIG_RTC_INTF_PROC=y > > CONFIG_RTC_INTF_DEV=y > > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > > # CONFIG_RTC_DRV_TEST is not set > > > > # > > # I2C RTC drivers > > # > > CONFIG_RTC_DRV_DS1307=m > > CONFIG_RTC_DRV_DS1374=m > > CONFIG_RTC_DRV_DS1672=m > > # CONFIG_RTC_DRV_DS3232 is not set > > CONFIG_RTC_DRV_MAX6900=m > > CONFIG_RTC_DRV_RS5C372=m > > CONFIG_RTC_DRV_ISL1208=m > > # CONFIG_RTC_DRV_ISL12022 is not set > > CONFIG_RTC_DRV_X1205=m > > CONFIG_RTC_DRV_PCF8563=m > > CONFIG_RTC_DRV_PCF8583=m > > CONFIG_RTC_DRV_M41T80=m > > # CONFIG_RTC_DRV_M41T80_WDT is not set > > # CONFIG_RTC_DRV_BQ32K is not set > > CONFIG_RTC_DRV_S35390A=m > > CONFIG_RTC_DRV_FM3130=m > > CONFIG_RTC_DRV_RX8581=m > > CONFIG_RTC_DRV_RX8025=m > > # CONFIG_RTC_DRV_EM3027 is not set > > # CONFIG_RTC_DRV_RV3029C2 is not set > > > > # > > # SPI RTC drivers > > # > > > > # > > # Platform RTC drivers > > # > > CONFIG_RTC_DRV_CMOS=y > > CONFIG_RTC_DRV_DS1286=m > > CONFIG_RTC_DRV_DS1511=m > > CONFIG_RTC_DRV_DS1553=m > > CONFIG_RTC_DRV_DS1742=m > > CONFIG_RTC_DRV_STK17TA8=m > > CONFIG_RTC_DRV_M48T86=m > > CONFIG_RTC_DRV_M48T35=m > > CONFIG_RTC_DRV_M48T59=m > > # CONFIG_RTC_DRV_MSM6242 is not set > > CONFIG_RTC_DRV_BQ4802=m > > # CONFIG_RTC_DRV_RP5C01 is not set > > CONFIG_RTC_DRV_V3020=m > > > > # > > # on-CPU RTC drivers > > # > > CONFIG_DMADEVICES=y > > # CONFIG_DMADEVICES_DEBUG is not set > > > > # > > # DMA Devices > > # > > # CONFIG_INTEL_MID_DMAC is not set > > CONFIG_INTEL_IOATDMA=m > > # CONFIG_TIMB_DMA is not set > > # CONFIG_PCH_DMA is not set > > CONFIG_DMA_ENGINE=y > > > > # > > # DMA Clients > > # > > CONFIG_NET_DMA=y > > CONFIG_ASYNC_TX_DMA=y > > # CONFIG_DMATEST is not set > > CONFIG_DCA=m > > # CONFIG_AUXDISPLAY is not set > > CONFIG_UIO=m > > CONFIG_UIO_CIF=m > > # CONFIG_UIO_PDRV is not set > > # CONFIG_UIO_PDRV_GENIRQ is not set > > # CONFIG_UIO_AEC is not set > > # CONFIG_UIO_SERCOS3 is not set > > # CONFIG_UIO_PCI_GENERIC is not set > > # CONFIG_UIO_NETX is not set > > > > # > > # Virtio drivers > > # > > # CONFIG_VIRTIO_PCI is not set > > # CONFIG_VIRTIO_BALLOON is not set > > # CONFIG_VIRTIO_MMIO is not set > > > > # > > # Xen driver support > > # > > CONFIG_XEN_BALLOON=y > > CONFIG_XEN_SCRUB_PAGES=y > > CONFIG_XEN_DEV_EVTCHN=y > > CONFIG_XEN_BACKEND=y > > CONFIG_XENFS=y > > CONFIG_XEN_COMPAT_XENFS=y > > CONFIG_XEN_SYS_HYPERVISOR=y > > CONFIG_XEN_XENBUS_FRONTEND=y > > CONFIG_XEN_GNTDEV=y > > CONFIG_XEN_GRANT_DEV_ALLOC=y > > CONFIG_SWIOTLB_XEN=y > > CONFIG_XEN_PCIDEV_BACKEND=y > > # CONFIG_STAGING is not set > > CONFIG_X86_PLATFORM_DEVICES=y > > # CONFIG_ACER_WMI is not set > > # CONFIG_ACERHDF is not set > > # CONFIG_ASUS_LAPTOP is not set > > # CONFIG_DELL_LAPTOP is not set > > CONFIG_DELL_WMI=m > > CONFIG_DELL_WMI_AIO=m > > # CONFIG_FUJITSU_LAPTOP is not set > > # CONFIG_TC1100_WMI is not set > > # CONFIG_HP_ACCEL is not set > > # CONFIG_HP_WMI is not set > > # CONFIG_PANASONIC_LAPTOP is not set > > # CONFIG_THINKPAD_ACPI is not set > > # CONFIG_SENSORS_HDAPS is not set > > # CONFIG_INTEL_MENLOW is not set > > # CONFIG_EEEPC_LAPTOP is not set > > # CONFIG_ASUS_WMI is not set > > CONFIG_ACPI_WMI=m > > # CONFIG_MSI_WMI is not set > > # CONFIG_ACPI_ASUS is not set > > # CONFIG_TOPSTAR_LAPTOP is not set > > # CONFIG_ACPI_TOSHIBA is not set > > # CONFIG_TOSHIBA_BT_RFKILL is not set > > # CONFIG_ACPI_CMPC is not set > > # CONFIG_INTEL_IPS is not set > > # CONFIG_IBM_RTL is not set > > # CONFIG_XO15_EBOOK is not set > > CONFIG_MXM_WMI=m > > # CONFIG_SAMSUNG_Q10 is not set > > > > # > > # Hardware Spinlock drivers > > # > > CONFIG_CLKSRC_I8253=y > > CONFIG_CLKEVT_I8253=y > > CONFIG_I8253_LOCK=y > > CONFIG_CLKBLD_I8253=y > > CONFIG_IOMMU_SUPPORT=y > > # CONFIG_INTEL_IOMMU is not set > > # CONFIG_VIRT_DRIVERS is not set > > # CONFIG_HYPERV is not set > > # CONFIG_PM_DEVFREQ is not set > > > > # > > # Firmware Drivers > > # > > # CONFIG_EDD is not set > > CONFIG_FIRMWARE_MEMMAP=y > > CONFIG_DELL_RBU=y > > CONFIG_DCDBAS=y > > CONFIG_DMIID=y > > # CONFIG_DMI_SYSFS is not set > > # CONFIG_ISCSI_IBFT_FIND is not set > > # CONFIG_SIGMA is not set > > # CONFIG_GOOGLE_FIRMWARE is not set > > > > # > > # File systems > > # > > CONFIG_EXT2_FS=m > > CONFIG_EXT2_FS_XATTR=y > > CONFIG_EXT2_FS_POSIX_ACL=y > > CONFIG_EXT2_FS_SECURITY=y > > # CONFIG_EXT2_FS_XIP is not set > > CONFIG_EXT3_FS=y > > CONFIG_EXT3_DEFAULTS_TO_ORDERED=y > > CONFIG_EXT3_FS_XATTR=y > > CONFIG_EXT3_FS_POSIX_ACL=y > > CONFIG_EXT3_FS_SECURITY=y > > CONFIG_EXT4_FS=m > > CONFIG_EXT4_FS_XATTR=y > > CONFIG_EXT4_FS_POSIX_ACL=y > > CONFIG_EXT4_FS_SECURITY=y > > CONFIG_EXT4_DEBUG=y > > CONFIG_JBD=y > > # CONFIG_JBD_DEBUG is not set > > CONFIG_JBD2=m > > # CONFIG_JBD2_DEBUG is not set > > CONFIG_FS_MBCACHE=y > > CONFIG_REISERFS_FS=m > > # CONFIG_REISERFS_CHECK is not set > > # CONFIG_REISERFS_PROC_INFO is not set > > CONFIG_REISERFS_FS_XATTR=y > > CONFIG_REISERFS_FS_POSIX_ACL=y > > CONFIG_REISERFS_FS_SECURITY=y > > CONFIG_JFS_FS=m > > CONFIG_JFS_POSIX_ACL=y > > CONFIG_JFS_SECURITY=y > > # CONFIG_JFS_DEBUG is not set > > # CONFIG_JFS_STATISTICS is not set > > CONFIG_XFS_FS=m > > CONFIG_XFS_QUOTA=y > > CONFIG_XFS_POSIX_ACL=y > > CONFIG_XFS_RT=y > > # CONFIG_XFS_DEBUG is not set > > CONFIG_GFS2_FS=m > > CONFIG_GFS2_FS_LOCKING_DLM=y > > # CONFIG_OCFS2_FS is not set > > # CONFIG_BTRFS_FS is not set > > CONFIG_NILFS2_FS=m > > CONFIG_FS_POSIX_ACL=y > > CONFIG_EXPORTFS=m > > CONFIG_FILE_LOCKING=y > > CONFIG_FSNOTIFY=y > > CONFIG_DNOTIFY=y > > CONFIG_INOTIFY_USER=y > > # CONFIG_FANOTIFY is not set > > CONFIG_QUOTA=y > > CONFIG_QUOTA_NETLINK_INTERFACE=y > > CONFIG_PRINT_QUOTA_WARNING=y > > # CONFIG_QUOTA_DEBUG is not set > > CONFIG_QUOTA_TREE=m > > CONFIG_QFMT_V1=m > > CONFIG_QFMT_V2=m > > CONFIG_QUOTACTL=y > > CONFIG_AUTOFS4_FS=y > > CONFIG_FUSE_FS=m > > CONFIG_CUSE=m > > CONFIG_GENERIC_ACL=y > > > > # > > # Caches > > # > > CONFIG_FSCACHE=m > > CONFIG_FSCACHE_STATS=y > > # CONFIG_FSCACHE_HISTOGRAM is not set > > CONFIG_FSCACHE_DEBUG=y > > # CONFIG_FSCACHE_OBJECT_LIST is not set > > CONFIG_CACHEFILES=m > > CONFIG_CACHEFILES_DEBUG=y > > # CONFIG_CACHEFILES_HISTOGRAM is not set > > > > # > > # CD-ROM/DVD Filesystems > > # > > CONFIG_ISO9660_FS=y > > CONFIG_JOLIET=y > > CONFIG_ZISOFS=y > > # CONFIG_UDF_FS is not set > > > > # > > # DOS/FAT/NT Filesystems > > # > > CONFIG_FAT_FS=y > > CONFIG_MSDOS_FS=y > > CONFIG_VFAT_FS=y > > CONFIG_FAT_DEFAULT_CODEPAGE=437 > > CONFIG_FAT_DEFAULT_IOCHARSET="utf8" > > CONFIG_NTFS_FS=y > > CONFIG_NTFS_DEBUG=y > > CONFIG_NTFS_RW=y > > > > # > > # Pseudo filesystems > > # > > CONFIG_PROC_FS=y > > CONFIG_PROC_KCORE=y > > CONFIG_PROC_SYSCTL=y > > CONFIG_PROC_PAGE_MONITOR=y > > CONFIG_SYSFS=y > > CONFIG_TMPFS=y > > CONFIG_TMPFS_POSIX_ACL=y > > CONFIG_TMPFS_XATTR=y > > # CONFIG_HUGETLBFS is not set > > # CONFIG_HUGETLB_PAGE is not set > > CONFIG_CONFIGFS_FS=y > > CONFIG_MISC_FILESYSTEMS=y > > # CONFIG_ADFS_FS is not set > > # CONFIG_AFFS_FS is not set > > # CONFIG_ECRYPT_FS is not set > > # CONFIG_HFS_FS is not set > > # CONFIG_HFSPLUS_FS is not set > > # CONFIG_BEFS_FS is not set > > # CONFIG_BFS_FS is not set > > # CONFIG_EFS_FS is not set > > # CONFIG_JFFS2_FS is not set > > # CONFIG_LOGFS is not set > > # CONFIG_CRAMFS is not set > > # CONFIG_SQUASHFS is not set > > # CONFIG_VXFS_FS is not set > > # CONFIG_MINIX_FS is not set > > # CONFIG_OMFS_FS is not set > > # CONFIG_HPFS_FS is not set > > # CONFIG_QNX4FS_FS is not set > > # CONFIG_ROMFS_FS is not set > > # CONFIG_PSTORE is not set > > # CONFIG_SYSV_FS is not set > > # CONFIG_UFS_FS is not set > > # CONFIG_EXOFS_FS is not set > > CONFIG_NETWORK_FILESYSTEMS=y > > CONFIG_NFS_FS=y > > CONFIG_NFS_V3=y > > CONFIG_NFS_V3_ACL=y > > CONFIG_NFS_V4=y > > # CONFIG_NFS_V4_1 is not set > > # CONFIG_NFS_USE_LEGACY_DNS is not set > > CONFIG_NFS_USE_KERNEL_DNS=y > > # CONFIG_NFS_USE_NEW_IDMAPPER is not set > > CONFIG_NFSD=m > > CONFIG_NFSD_V2_ACL=y > > CONFIG_NFSD_V3=y > > CONFIG_NFSD_V3_ACL=y > > CONFIG_NFSD_V4=y > > CONFIG_LOCKD=y > > CONFIG_LOCKD_V4=y > > CONFIG_NFS_ACL_SUPPORT=y > > CONFIG_NFS_COMMON=y > > CONFIG_SUNRPC=y > > CONFIG_SUNRPC_GSS=y > > # CONFIG_RPCSEC_GSS_KRB5 is not set > > # CONFIG_CEPH_FS is not set > > CONFIG_CIFS=y > > # CONFIG_CIFS_STATS is not set > > CONFIG_CIFS_WEAK_PW_HASH=y > > CONFIG_CIFS_UPCALL=y > > CONFIG_CIFS_XATTR=y > > CONFIG_CIFS_POSIX=y > > # CONFIG_CIFS_DEBUG2 is not set > > CONFIG_CIFS_DFS_UPCALL=y > > # CONFIG_CIFS_ACL is not set > > # CONFIG_NCP_FS is not set > > # CONFIG_CODA_FS is not set > > # CONFIG_AFS_FS is not set > > > > # > > # Partition Types > > # > > CONFIG_PARTITION_ADVANCED=y > > CONFIG_ACORN_PARTITION=y > > # CONFIG_ACORN_PARTITION_CUMANA is not set > > # CONFIG_ACORN_PARTITION_EESOX is not set > > CONFIG_ACORN_PARTITION_ICS=y > > # CONFIG_ACORN_PARTITION_ADFS is not set > > # CONFIG_ACORN_PARTITION_POWERTEC is not set > > CONFIG_ACORN_PARTITION_RISCIX=y > > CONFIG_OSF_PARTITION=y > > CONFIG_AMIGA_PARTITION=y > > CONFIG_ATARI_PARTITION=y > > CONFIG_MAC_PARTITION=y > > CONFIG_MSDOS_PARTITION=y > > CONFIG_BSD_DISKLABEL=y > > CONFIG_MINIX_SUBPARTITION=y > > CONFIG_SOLARIS_X86_PARTITION=y > > CONFIG_UNIXWARE_DISKLABEL=y > > CONFIG_LDM_PARTITION=y > > # CONFIG_LDM_DEBUG is not set > > CONFIG_SGI_PARTITION=y > > CONFIG_ULTRIX_PARTITION=y > > CONFIG_SUN_PARTITION=y > > CONFIG_KARMA_PARTITION=y > > # CONFIG_EFI_PARTITION is not set > > # CONFIG_SYSV68_PARTITION is not set > > CONFIG_NLS=y > > CONFIG_NLS_DEFAULT="utf8" > > CONFIG_NLS_CODEPAGE_437=y > > CONFIG_NLS_CODEPAGE_737=y > > CONFIG_NLS_CODEPAGE_775=y > > CONFIG_NLS_CODEPAGE_850=y > > CONFIG_NLS_CODEPAGE_852=y > > CONFIG_NLS_CODEPAGE_855=y > > CONFIG_NLS_CODEPAGE_857=y > > CONFIG_NLS_CODEPAGE_860=y > > CONFIG_NLS_CODEPAGE_861=y > > CONFIG_NLS_CODEPAGE_862=y > > CONFIG_NLS_CODEPAGE_863=y > > CONFIG_NLS_CODEPAGE_864=y > > CONFIG_NLS_CODEPAGE_865=y > > CONFIG_NLS_CODEPAGE_866=y > > CONFIG_NLS_CODEPAGE_869=y > > CONFIG_NLS_CODEPAGE_936=y > > CONFIG_NLS_CODEPAGE_950=y > > CONFIG_NLS_CODEPAGE_932=y > > CONFIG_NLS_CODEPAGE_949=y > > CONFIG_NLS_CODEPAGE_874=y > > CONFIG_NLS_ISO8859_8=y > > CONFIG_NLS_CODEPAGE_1250=y > > CONFIG_NLS_CODEPAGE_1251=y > > CONFIG_NLS_ASCII=y > > CONFIG_NLS_ISO8859_1=y > > CONFIG_NLS_ISO8859_2=y > > CONFIG_NLS_ISO8859_3=y > > CONFIG_NLS_ISO8859_4=y > > CONFIG_NLS_ISO8859_5=y > > CONFIG_NLS_ISO8859_6=y > > CONFIG_NLS_ISO8859_7=y > > CONFIG_NLS_ISO8859_9=y > > CONFIG_NLS_ISO8859_13=y > > CONFIG_NLS_ISO8859_14=y > > CONFIG_NLS_ISO8859_15=y > > CONFIG_NLS_KOI8_R=y > > CONFIG_NLS_KOI8_U=y > > CONFIG_NLS_UTF8=y > > CONFIG_DLM=m > > CONFIG_DLM_DEBUG=y > > > > # > > # Kernel hacking > > # > > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > > CONFIG_PRINTK_TIME=y > > CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 > > # CONFIG_ENABLE_WARN_DEPRECATED is not set > > CONFIG_ENABLE_MUST_CHECK=y > > CONFIG_FRAME_WARN=1024 > > CONFIG_MAGIC_SYSRQ=y > > CONFIG_STRIP_ASM_SYMS=y > > CONFIG_UNUSED_SYMBOLS=y > > CONFIG_DEBUG_FS=y > > CONFIG_HEADERS_CHECK=y > > CONFIG_DEBUG_SECTION_MISMATCH=y > > CONFIG_DEBUG_KERNEL=y > > CONFIG_DEBUG_SHIRQ=y > > CONFIG_LOCKUP_DETECTOR=y > > CONFIG_HARDLOCKUP_DETECTOR=y > > # CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set > > CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 > > # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set > > CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 > > CONFIG_DETECT_HUNG_TASK=y > > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 > > # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set > > CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 > > CONFIG_SCHED_DEBUG=y > > # CONFIG_SCHEDSTATS is not set > > CONFIG_TIMER_STATS=y > > # CONFIG_DEBUG_OBJECTS is not set > > # CONFIG_SLUB_DEBUG_ON is not set > > # CONFIG_SLUB_STATS is not set > > # CONFIG_DEBUG_KMEMLEAK is not set > > # CONFIG_DEBUG_RT_MUTEXES is not set > > # CONFIG_RT_MUTEX_TESTER is not set > > # CONFIG_DEBUG_SPINLOCK is not set > > CONFIG_DEBUG_MUTEXES=y > > # CONFIG_DEBUG_LOCK_ALLOC is not set > > # CONFIG_PROVE_LOCKING is not set > > # CONFIG_SPARSE_RCU_POINTER is not set > > # CONFIG_LOCK_STAT is not set > > # CONFIG_DEBUG_ATOMIC_SLEEP is not set > > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > > CONFIG_STACKTRACE=y > > # CONFIG_DEBUG_STACK_USAGE is not set > > # CONFIG_DEBUG_KOBJECT is not set > > CONFIG_DEBUG_HIGHMEM=y > > CONFIG_DEBUG_BUGVERBOSE=y > > CONFIG_DEBUG_INFO=y > > # CONFIG_DEBUG_INFO_REDUCED is not set > > # CONFIG_DEBUG_VM is not set > > # CONFIG_DEBUG_VIRTUAL is not set > > # CONFIG_DEBUG_WRITECOUNT is not set > > CONFIG_DEBUG_MEMORY_INIT=y > > # CONFIG_DEBUG_LIST is not set > > # CONFIG_TEST_LIST_SORT is not set > > # CONFIG_DEBUG_SG is not set > > # CONFIG_DEBUG_NOTIFIERS is not set > > # CONFIG_DEBUG_CREDENTIALS is not set > > CONFIG_ARCH_WANT_FRAME_POINTERS=y > > # CONFIG_FRAME_POINTER is not set > > # CONFIG_BOOT_PRINTK_DELAY is not set > > # CONFIG_RCU_TORTURE_TEST is not set > > CONFIG_RCU_CPU_STALL_TIMEOUT=60 > > # CONFIG_BACKTRACE_SELF_TEST is not set > > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set > > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set > > # CONFIG_DEBUG_PER_CPU_MAPS is not set > > # CONFIG_LKDTM is not set > > # CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set > > # CONFIG_FAULT_INJECTION is not set > > # CONFIG_LATENCYTOP is not set > > CONFIG_SYSCTL_SYSCALL_CHECK=y > > # CONFIG_DEBUG_PAGEALLOC is not set > > CONFIG_USER_STACKTRACE_SUPPORT=y > > CONFIG_NOP_TRACER=y > > CONFIG_HAVE_FUNCTION_TRACER=y > > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y > > CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y > > CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y > > CONFIG_HAVE_DYNAMIC_FTRACE=y > > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y > > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y > > CONFIG_HAVE_C_RECORDMCOUNT=y > > CONFIG_RING_BUFFER=y > > CONFIG_EVENT_TRACING=y > > CONFIG_EVENT_POWER_TRACING_DEPRECATED=y > > CONFIG_CONTEXT_SWITCH_TRACER=y > > CONFIG_TRACING=y > > CONFIG_GENERIC_TRACER=y > > CONFIG_TRACING_SUPPORT=y > > CONFIG_FTRACE=y > > # CONFIG_FUNCTION_TRACER is not set > > # CONFIG_IRQSOFF_TRACER is not set > > # CONFIG_SCHED_TRACER is not set > > # CONFIG_FTRACE_SYSCALLS is not set > > CONFIG_BRANCH_PROFILE_NONE=y > > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set > > # CONFIG_PROFILE_ALL_BRANCHES is not set > > # CONFIG_STACK_TRACER is not set > > CONFIG_BLK_DEV_IO_TRACE=y > > # CONFIG_FTRACE_STARTUP_TEST is not set > > # CONFIG_MMIOTRACE is not set > > # CONFIG_RING_BUFFER_BENCHMARK is not set > > # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set > > # CONFIG_BUILD_DOCSRC is not set > > # CONFIG_DYNAMIC_DEBUG is not set > > # CONFIG_DMA_API_DEBUG is not set > > # CONFIG_ATOMIC64_SELFTEST is not set > > # CONFIG_SAMPLES is not set > > CONFIG_HAVE_ARCH_KGDB=y > > CONFIG_KGDB=y > > CONFIG_KGDB_SERIAL_CONSOLE=y > > # CONFIG_KGDB_TESTS is not set > > CONFIG_KGDB_LOW_LEVEL_TRAP=y > > # CONFIG_KGDB_KDB is not set > > CONFIG_HAVE_ARCH_KMEMCHECK=y > > # CONFIG_TEST_KSTRTOX is not set > > CONFIG_STRICT_DEVMEM=y > > CONFIG_X86_VERBOSE_BOOTUP=y > > CONFIG_EARLY_PRINTK=y > > # CONFIG_EARLY_PRINTK_DBGP is not set > > # CONFIG_DEBUG_STACKOVERFLOW is not set > > # CONFIG_X86_PTDUMP is not set > > CONFIG_DEBUG_RODATA=y > > # CONFIG_DEBUG_RODATA_TEST is not set > > # CONFIG_DEBUG_SET_MODULE_RONX is not set > > # CONFIG_DEBUG_NX_TEST is not set > > CONFIG_DOUBLEFAULT=y > > # CONFIG_IOMMU_STRESS is not set > > CONFIG_HAVE_MMIOTRACE_SUPPORT=y > > CONFIG_IO_DELAY_TYPE_0X80=0 > > CONFIG_IO_DELAY_TYPE_0XED=1 > > CONFIG_IO_DELAY_TYPE_UDELAY=2 > > CONFIG_IO_DELAY_TYPE_NONE=3 > > CONFIG_IO_DELAY_0X80=y > > # CONFIG_IO_DELAY_0XED is not set > > # CONFIG_IO_DELAY_UDELAY is not set > > # CONFIG_IO_DELAY_NONE is not set > > CONFIG_DEFAULT_IO_DELAY_TYPE=0 > > CONFIG_DEBUG_BOOT_PARAMS=y > > # CONFIG_CPA_DEBUG is not set > > CONFIG_OPTIMIZE_INLINING=y > > # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set > > > > # > > # Security options > > # > > CONFIG_KEYS=y > > # CONFIG_ENCRYPTED_KEYS is not set > > # CONFIG_KEYS_DEBUG_PROC_KEYS is not set > > # CONFIG_SECURITY_DMESG_RESTRICT is not set > > # CONFIG_SECURITY is not set > > # CONFIG_SECURITYFS is not set > > CONFIG_DEFAULT_SECURITY_DAC=y > > CONFIG_DEFAULT_SECURITY="" > > CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y > > CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y > > CONFIG_CRYPTO=y > > > > # > > # Crypto core or helper > > # > > CONFIG_CRYPTO_ALGAPI=y > > CONFIG_CRYPTO_ALGAPI2=y > > CONFIG_CRYPTO_AEAD=m > > CONFIG_CRYPTO_AEAD2=y > > CONFIG_CRYPTO_BLKCIPHER=y > > CONFIG_CRYPTO_BLKCIPHER2=y > > CONFIG_CRYPTO_HASH=y > > CONFIG_CRYPTO_HASH2=y > > CONFIG_CRYPTO_RNG=y > > CONFIG_CRYPTO_RNG2=y > > CONFIG_CRYPTO_PCOMP=y > > CONFIG_CRYPTO_PCOMP2=y > > CONFIG_CRYPTO_MANAGER=y > > CONFIG_CRYPTO_MANAGER2=y > > # CONFIG_CRYPTO_USER is not set > > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y > > CONFIG_CRYPTO_GF128MUL=m > > CONFIG_CRYPTO_NULL=m > > # CONFIG_CRYPTO_PCRYPT is not set > > CONFIG_CRYPTO_WORKQUEUE=y > > # CONFIG_CRYPTO_CRYPTD is not set > > CONFIG_CRYPTO_AUTHENC=m > > CONFIG_CRYPTO_TEST=m > > > > # > > # Authenticated Encryption with Associated Data > > # > > CONFIG_CRYPTO_CCM=m > > CONFIG_CRYPTO_GCM=m > > CONFIG_CRYPTO_SEQIV=m > > > > # > > # Block modes > > # > > CONFIG_CRYPTO_CBC=y > > CONFIG_CRYPTO_CTR=m > > CONFIG_CRYPTO_CTS=m > > CONFIG_CRYPTO_ECB=y > > CONFIG_CRYPTO_LRW=m > > CONFIG_CRYPTO_PCBC=m > > CONFIG_CRYPTO_XTS=m > > > > # > > # Hash modes > > # > > CONFIG_CRYPTO_HMAC=y > > CONFIG_CRYPTO_XCBC=m > > CONFIG_CRYPTO_VMAC=m > > > > # > > # Digest > > # > > CONFIG_CRYPTO_CRC32C=y > > CONFIG_CRYPTO_CRC32C_INTEL=m > > CONFIG_CRYPTO_GHASH=m > > CONFIG_CRYPTO_MD4=y > > CONFIG_CRYPTO_MD5=y > > CONFIG_CRYPTO_MICHAEL_MIC=y > > CONFIG_CRYPTO_RMD128=m > > CONFIG_CRYPTO_RMD160=m > > CONFIG_CRYPTO_RMD256=y > > CONFIG_CRYPTO_RMD320=y > > CONFIG_CRYPTO_SHA1=y > > CONFIG_CRYPTO_SHA256=y > > CONFIG_CRYPTO_SHA512=y > > CONFIG_CRYPTO_TGR192=y > > CONFIG_CRYPTO_WP512=y > > > > # > > # Ciphers > > # > > CONFIG_CRYPTO_AES=y > > CONFIG_CRYPTO_AES_586=y > > # CONFIG_CRYPTO_AES_NI_INTEL is not set > > CONFIG_CRYPTO_ANUBIS=y > > CONFIG_CRYPTO_ARC4=y > > CONFIG_CRYPTO_BLOWFISH=y > > CONFIG_CRYPTO_BLOWFISH_COMMON=y > > CONFIG_CRYPTO_CAMELLIA=y > > CONFIG_CRYPTO_CAST5=y > > CONFIG_CRYPTO_CAST6=m > > CONFIG_CRYPTO_DES=y > > CONFIG_CRYPTO_FCRYPT=y > > CONFIG_CRYPTO_KHAZAD=y > > CONFIG_CRYPTO_SALSA20=y > > CONFIG_CRYPTO_SALSA20_586=y > > CONFIG_CRYPTO_SEED=y > > CONFIG_CRYPTO_SERPENT=y > > CONFIG_CRYPTO_TEA=y > > CONFIG_CRYPTO_TWOFISH=y > > CONFIG_CRYPTO_TWOFISH_COMMON=y > > CONFIG_CRYPTO_TWOFISH_586=y > > > > # > > # Compression > > # > > CONFIG_CRYPTO_DEFLATE=y > > CONFIG_CRYPTO_ZLIB=y > > CONFIG_CRYPTO_LZO=y > > > > # > > # Random Number Generation > > # > > CONFIG_CRYPTO_ANSI_CPRNG=y > > # CONFIG_CRYPTO_USER_API_HASH is not set > > # CONFIG_CRYPTO_USER_API_SKCIPHER is not set > > # CONFIG_CRYPTO_HW is not set > > CONFIG_HAVE_KVM=y > > CONFIG_VIRTUALIZATION=y > > # CONFIG_KVM is not set > > # CONFIG_VHOST_NET is not set > > # CONFIG_LGUEST is not set > > CONFIG_BINARY_PRINTF=y > > > > # > > # Library routines > > # > > CONFIG_BITREVERSE=y > > CONFIG_GENERIC_FIND_FIRST_BIT=y > > CONFIG_CRC_CCITT=y > > CONFIG_CRC16=y > > CONFIG_CRC_T10DIF=y > > CONFIG_CRC_ITU_T=y > > CONFIG_CRC32=y > > CONFIG_CRC7=y > > CONFIG_LIBCRC32C=y > > # CONFIG_CRC8 is not set > > CONFIG_AUDIT_GENERIC=y > > CONFIG_ZLIB_INFLATE=y > > CONFIG_ZLIB_DEFLATE=y > > CONFIG_LZO_COMPRESS=y > > CONFIG_LZO_DECOMPRESS=y > > CONFIG_XZ_DEC=y > > CONFIG_XZ_DEC_X86=y > > CONFIG_XZ_DEC_POWERPC=y > > CONFIG_XZ_DEC_IA64=y > > CONFIG_XZ_DEC_ARM=y > > CONFIG_XZ_DEC_ARMTHUMB=y > > CONFIG_XZ_DEC_SPARC=y > > CONFIG_XZ_DEC_BCJ=y > > # CONFIG_XZ_DEC_TEST is not set > > CONFIG_DECOMPRESS_GZIP=y > > CONFIG_DECOMPRESS_BZIP2=y > > CONFIG_DECOMPRESS_LZMA=y > > CONFIG_DECOMPRESS_XZ=y > > CONFIG_DECOMPRESS_LZO=y > > CONFIG_HAS_IOMEM=y > > CONFIG_HAS_IOPORT=y > > CONFIG_HAS_DMA=y > > CONFIG_CHECK_SIGNATURE=y > > CONFIG_CPU_RMAP=y > > CONFIG_NLATTR=y > > CONFIG_LRU_CACHE=m > > CONFIG_AVERAGE=y > > # CONFIG_CORDIC is not set > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xen.org > > http://lists.xen.org/xen-devel >
On Fri, Mar 16, 2012 at 07:11:27PM +0000, Goncalo Gomes wrote:> Any luck with this one? :)Can you try with a 64-bit hypervisor please? And please don''t top-post. ..> > > I can, see the attached config file1 > > > > > > > Oh wait, I am building 64-bit, you are doing 32-bit. Is your hypervisor 32-bit or > > > > 64-bit? > > > > > > It is 32bit, as is the remaining setup. Is this not a valid > > > configuration? > > > > > > Goncalo
On Fri, 16 Mar 2012, Konrad Rzeszutek Wilk wrote:> On Fri, Mar 16, 2012 at 07:11:27PM +0000, Goncalo Gomes wrote: > > Any luck with this one? :) > > Can you try with a 64-bit hypervisor please?I tried and I can still trigger the bug. I''ve attached the log. Goncalo _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
On Sun, Mar 18, 2012 at 03:50:35PM +0000, Goncalo Gomes wrote:> On Fri, 16 Mar 2012, Konrad Rzeszutek Wilk wrote: > > > On Fri, Mar 16, 2012 at 07:11:27PM +0000, Goncalo Gomes wrote: > > > Any luck with this one? :) > > > > Can you try with a 64-bit hypervisor please? > > I tried and I can still trigger the bug. > > I''ve attached the log. > > Goncalo.. snip..> [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000240000000 > (XEN) mm.c:943:d0 Attempt to map superpage without allowsuperpage flag in hypervisor > [ 0.000000] ------------[ cut here ]------------ > [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() > [ 0.000000] Hardware name: PowerEdge R310 > [ 0.000000] Modules linked in: > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > [ 0.000000] Call Trace: > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---So I''ve been able to reproduce this and it is due to CONFIG_NUMA=y set on 32-bit builds. From a brief look, it looks as this is happening: /* perform actual remap */ for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE) set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT), (node_pa >> PAGE_SHIFT) + pfn, PAGE_KERNEL_LARGE); The PAGE_KERNEL_LARGE means that the PSE bit (so the 2MB) is set which is a no-no. What is weird is that acpi_numa is disabled when booting under Xen, but somehow this (which in my case was the ''fake_numa'' code) still gets turned on. Even doing ''numa=off'' on the command line causes this to appear.
On Wed, 02 May 2012, Konrad Rzeszutek Wilk wrote: ...snip...> > [ 0.000000] Hardware name: PowerEdge R310 > > [ 0.000000] Modules linked in: > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 > > [ 0.000000] Call Trace: > > [ 0.000000] [<c104236b>] ? warn_slowpath_common+0x6a/0x7b > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1042389>] ? warn_slowpath_null+0xd/0x10 > > [ 0.000000] [<c1005442>] ? xen_mc_issue+0x34/0x62 > > [ 0.000000] [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42 > > [ 0.000000] [<c102edbe>] ? set_pmd_pfn+0xde/0xf9 > > [ 0.000000] [<c168b652>] ? init_alloc_remap+0x1b3/0x216 > > [ 0.000000] [<c168aa48>] ? setup_node_data+0x4c/0x22f > > [ 0.000000] [<c168b203>] ? T.744+0x290/0x2c2 > > [ 0.000000] [<c168b2ac>] ? T.743+0x77/0x1a1 > > [ 0.000000] [<c1025290>] ? default_get_apic_id+0x14/0x33 > > [ 0.000000] [<c168b3ed>] ? initmem_init+0x5/0xb7 > > [ 0.000000] [<c167cef4>] ? setup_arch+0x5bf/0x694 > > [ 0.000000] [<c100b840>] ? __spin_time_accum+0x26/0x36 > > [ 0.000000] [<c167852c>] ? start_kernel+0x81/0x34d > > [ 0.000000] [<c167a258>] ? xen_start_kernel+0x554/0x55b > > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > So I''ve been able to reproduce this and it is due to CONFIG_NUMA=y > set on 32-bit builds. > > From a brief look, it looks as this is happening: > > /* perform actual remap */ > for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE) > set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT), > (node_pa >> PAGE_SHIFT) + pfn, > PAGE_KERNEL_LARGE); > > The PAGE_KERNEL_LARGE means that the PSE bit (so the 2MB) is set > which is a no-no. What is weird is that acpi_numa is disabled when booting > under Xen, but somehow this (which in my case was the ''fake_numa'' code) > still gets turned on. Even doing ''numa=off'' on the command line causes > this to appear.Thanks for the investigation, I''ll turn off NUMA in my config. Goncalo