2013pfoley
2011-Oct-24 19:34 UTC
[Xen-devel] Xen dom0 linux kernel 3.1 boot failure ptwr_emulate: could not get_page_from_l1e
Hi,
I''m having xen dom0 crash during bootup when using the linux 3.1
kernel
however it worked when using the linux 2.6.34 kernel.
I tried using xen-unstable but got the exact same error as with xen
4.1.1.
xen-unstable changeset: 23981:6c583d35d76d
linux kernel 3.1.0
I''ve included the backtrace below.
let me know if you need any more info.
Peter
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/xen2.gz com2=9600,8n1 console=com2 loglvl=all
guest_loglvl=all nor
eboot
[Multiboot-elf, <0x100000:0x19ae10:0x5c1f0>, shtab=0x2f7078,
entry=0x100000]
module /boot/kernel-xen-git root=/dev/sda2 bonding.mode=4
bonding.miimon=100 co
nsole=hvc0 debug initcall_debug earlyprintk=xen
[Multiboot-module @ 0x2f8000, 0x1410eb7 bytes]
__ __ _ _ ____ _ _ _
\ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | |
___
\ // _ \ ''_ \ | || |_ __) |__| | | | ''_ \/ __| __/ _` |
''_ \| |/
_ \
/ \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | |
__/
/_/\_\___|_| |_| |_|(_)_____| \__,_|_|
|_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.2-unstable (2013pfoley@csl.tjhsst.edu) (gcc version
4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) Fri Oct 21 15:10:43 EDT 2011
(XEN) Latest ChangeSet: Thu Oct 20 15:36:01 2011 +0100
23981:6c583d35d76d
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: com2=9600,8n1 console=com2 loglvl=all
guest_loglvl=all noreboot
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f400 (usable)
(XEN) 000000000009f400 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000df61f000 (usable)
(XEN) 00000000df61f000 - 00000000df62c000 (ACPI data)
(XEN) 00000000df62c000 - 00000000df62d000 (usable)
(XEN) 00000000df62d000 - 00000000e4000000 (reserved)
(XEN) 00000000fec00000 - 00000000fee10000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000061ffff000 (usable)
(XEN) ACPI: RSDP 000F4F00, 0024 (r2 HP )
(XEN) ACPI: XSDT DF620340, 00B4 (r1 HP ProLiant 2 �
162E)
(XEN) ACPI: FACP DF620440, 00F4 (r3 HP ProLiant 2 �
162E)
(XEN) ACPI: DSDT DF620540, 200D (r1 HP DSDT 1 INTL
20030228)
(XEN) ACPI: FACS DF61F100, 0040
(XEN) ACPI: SPCR DF61F140, 0050 (r1 HP SPCRRBSU 1 �
162E)
(XEN) ACPI: MCFG DF61F1C0, 003C (r1 HP ProLiant 1
0)
(XEN) ACPI: HPET DF61F200, 0038 (r1 HP ProLiant 2 �
162E)
(XEN) ACPI: FFFF DF61F240, 0064 (r2 HP ProLiant 2 �
162E)
(XEN) ACPI: SPMI DF61F2C0, 0040 (r5 HP ProLiant 1 �
162E)
(XEN) ACPI: ERST DF61F300, 01D0 (r1 HP ProLiant 1 �
162E)
(XEN) ACPI: APIC DF61F500, 015E (r1 HP ProLiant 2
0)
(XEN) ACPI: SRAT DF61F680, 0570 (r1 HP Proliant 1 �
162E)
(XEN) ACPI: FFFF DF61FC00, 0176 (r1 HP ProLiant 1 �
162E)
(XEN) ACPI: BERT DF61FD80, 0030 (r1 HP ProLiant 1 �
162E)
(XEN) ACPI: HEST DF61FDC0, 00BC (r1 HP ProLiant 1 �
162E)
(XEN) ACPI: DMAR DF61FE80, 0154 (r1 HP ProLiant 1 �
162E)
(XEN) ACPI: SSDT DF622580, 0125 (r3 HP CRSPCI0 2 HP
1)
(XEN) ACPI: SSDT DF6226C0, 0255 (r3 HP riser1a 2 INTL
20061109)
(XEN) ACPI: SSDT DF622940, 03BB (r1 HP pcc 1 INTL
20090625)
(XEN) ACPI: SSDT DF622D00, 0377 (r1 HP pmab 1 INTL
20090625)
(XEN) ACPI: SSDT DF623080, 2B64 (r1 INTEL PPM RCM 1 INTL
20061109)
(XEN) System RAM: 24565MB (25155320kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 6 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 7 -> Node 0
(XEN) SRAT: PXM 1 -> APIC 16 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 17 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 18 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 19 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 20 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 21 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 22 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 23 -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-e0000000
(XEN) SRAT: Node 0 PXM 0 100000000-320000000
(XEN) SRAT: Node 1 PXM 1 320000000-620000000
(XEN) NUMA: Using 17 for the hash shift.
(XEN) Domain heap initialised DMA width 31 bits
(XEN) found SMP MP-table at 000f4f80
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x908
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[904,0], pm1x_evt[900,0]
(XEN) ACPI: wakeup_vec[df61f10c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
(XEN) Processor #16 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
(XEN) Processor #20 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
(XEN) Processor #18 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] enabled)
(XEN) Processor #22 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
(XEN) Processor #17 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) Processor #5 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
(XEN) Processor #21 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
(XEN) Processor #19 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) Processor #7 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
(XEN) Processor #23 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) ERST table is invalid
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 48 GSI, 3040 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2266.778 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1219: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank
0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 -
3f
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 128 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 16 CPUs
(XEN) HPET''s MSI mode hasn''t been supported when Interrupt
Remapping is
enabled.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0xa69000
(XEN) elf_parse_binary: phdr: paddr=0x1c00000 memsz=0x990e0
(XEN) elf_parse_binary: phdr: paddr=0x1c9a000 memsz=0x13400
(XEN) elf_parse_binary: phdr: paddr=0x1cae000 memsz=0x2d4000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1f82000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81cae200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) elf_xen_parse_note: FEATURES =
"!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81f82000
(XEN) virt_entry = 0xffffffff81cae200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f82000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000608000000->0000000610000000 (6140612 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f82000
(XEN) Init. ramdisk: ffffffff81f82000->ffffffff81f82000
(XEN) Phys-Mach map: ffffffff81f82000->ffffffff84e9b620
(XEN) Start info: ffffffff84e9c000->ffffffff84e9c4b4
(XEN) Page tables: ffffffff84e9d000->ffffffff84ec8000
(XEN) Boot stack: ffffffff84ec8000->ffffffff84ec9000
(XEN) TOTAL: ffffffff80000000->ffffffff85000000
(XEN) ENTRY ADDRESS: ffffffff81cae200
(XEN) Dom0 has maximum 16 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 ->
0xffffffff81a69000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81c00000 ->
0xffffffff81c990e0
(XEN) elf_load_binary: phdr 2 at 0xffffffff81c9a000 ->
0xffffffff81cad400
(XEN) elf_load_binary: phdr 3 at 0xffffffff81cae000 ->
0xffffffff81d54000
(XEN) Scrubbing Free RAM: .done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch
input to Xen)
(XEN) Freed 244kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0 (root@galapagos) (gcc version 4.5.3
(Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #4 SMP Mon Oct 24 15:03:22 EDT 2011
[ 0.000000] Command line: root=/dev/sda2 bonding.mode=4
bonding.miimon=100 console=hvc0 debug initcall_debug earlyprintk=xen
[ 0.000000] Freeing e4000-fec00 pfn range: 109568 pages freed
[ 0.000000] Freeing fee10-ff800 pfn range: 2544 pages freed
[ 0.000000] released 112112 pages of unused memory
[ 0.000000] 1-1 mapping on a0->100
[ 0.000000] 1-1 mapping on df61f->df62c
[ 0.000000] 1-1 mapping on df62d->100000
[ 0.000000] Set 133696 page(s) to 1-1 mapping.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000df61f000 (usable)
[ 0.000000] Xen: 00000000df61f000 - 00000000df62c000 (ACPI data)
[ 0.000000] Xen: 00000000df62c000 - 00000000df62d000 (usable)
[ 0.000000] Xen: 00000000df62d000 - 00000000e4000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fee10000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 000000063b5ef000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: HP ProLiant DL380 G6, BIOS P62 05/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x63b5ef max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xdf62d max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80
(XEN) mm.c:945:d0 Error getting mfn 100 (pfn 5555555555555555) from L1
entry 8000000000100461 for l1e_owner=0, pg_owner=0
(XEN) mm.c:5046:d0 ptwr_emulate: could not get_page_from_l1e()
[ 0.000000] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 0.000000] IP: [<ffffffff81008a5a>] xen_set_pte+0x3a/0x1f0
[ 0.000000] PGD 0
[ 0.000000] Oops: 0003 [#1] SMP
[ 0.000000] CPU 0
[ 0.000000] Modules linked in:
[ 0.000000]
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0 #4 HP ProLiant
DL380 G6
[ 0.000000] RIP: e030:[<ffffffff81008a5a>] [<ffffffff81008a5a>]
xen_set_pte+0x3a/0x1f0
[ 0.000000] RSP: e02b:ffffffff81c01d50 EFLAGS: 00010097
[ 0.000000] RAX: 0000000000000000 RBX: ffffffff81d573c0 RCX:
0000000000000001
[ 0.000000] RDX: 0000000010000001 RSI: 8000000000100461 RDI:
ffffffff81d573c0
[ 0.000000] RBP: ffffffff81c01d90 R08: 0000000000000000 R09:
00000000000f4f90
[ 0.000000] R10: 00000000deadbeef R11: 0000000000000010 R12:
8000000000100461
[ 0.000000] R13: 8000000000100463 R14: 8000000000000563 R15:
0000000000100000
[ 0.000000] FS: 0000000000000000(0000) GS:ffffffff81c9a000(0000)
knlGS:0000000000000000
[ 0.000000] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.000000] CR2: 0000000000000000 CR3: 0000000001c05000 CR4:
0000000000002660
[ 0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 0.000000] DR3: 0000000000000000 DR6: 0000000000000000 DR7:
0000000000000000
[ 0.000000] Process swapper (pid: 0, threadinfo ffffffff81c00000,
task ffffffff81c0d020)
[ 0.000000] Stack:
[ 0.000000] ffffffff81004ef1 0000000000000010 00000000deadbeef
ffffffff81d573c0
[ 0.000000] 0000000000000100 8000000000100463 8000000000000563
0000000000100000
[ 0.000000] ffffffff81c01dc0 ffffffff81cb299f 0000000000100000
ffffffffff478000
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81004ef1>] ?
__raw_callee_save_xen_pte_val+0x11/0x1e
[ 0.000000] [<ffffffff81cb299f>] xen_set_pte_init+0x7f/0x87
[ 0.000000] [<ffffffff81cc2a99>] __early_set_fixmap+0x73/0xbc
[ 0.000000] [<ffffffff81cc2c01>] __early_ioremap+0x11f/0x1ad
[ 0.000000] [<ffffffff81cc2f07>] early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff81cbc2ad>] get_mpc_size+0x14/0x4c
[ 0.000000] [<ffffffff81cbc3b1>] smp_scan_config+0xcc/0xfa
[ 0.000000] [<ffffffff81cf3300>] ?
firmware_map_add_hotplug+0xa4/0xa4
[ 0.000000] [<ffffffff81cbcfb3>] default_find_smp_config+0x36/0x5a
[ 0.000000] [<ffffffff81cb4770>] setup_arch+0x539/0xad7
[ 0.000000] [<ffffffff81009ecf>] ?
__raw_callee_save_xen_restore_fl+0x11/0x1e
[ 0.000000] [<ffffffff81cf3300>] ?
firmware_map_add_hotplug+0xa4/0xa4
[ 0.000000] [<ffffffff81709534>] ? printk+0x3c/0x3e
[ 0.000000] [<ffffffff8170c2ea>] ?
_raw_spin_unlock_irqrestore+0x1a/0x20
[ 0.000000] [<ffffffff81cf3300>] ?
firmware_map_add_hotplug+0xa4/0xa4
[ 0.000000] [<ffffffff81cae93b>] start_kernel+0x8e/0x359
[ 0.000000] [<ffffffff81cae347>]
x86_64_start_reservations+0x132/0x136
[ 0.000000] [<ffffffff81cb1eac>] xen_start_kernel+0x5ef/0x5f6
[ 0.000000] Code: 89 5d d8 4c 89 65 e0 48 89 fb 4c 89 6d e8 4c 89 75
f0 49 89 f4 85 c0 4c 89 7d f8 0f 85 17 01 00 00 e8 2b 06 03 00 83 f8 01
74 1e <4c> 89 23 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8 4c 8b 75 f0 4c 8b
[ 0.000000] RIP [<ffffffff81008a5a>] xen_set_pte+0x3a/0x1f0
[ 0.000000] RSP <ffffffff81c01d50>
[ 0.000000] CR2: 0000000000000000
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle
task!
[ 0.000000] Pid: 0, comm: swapper Tainted: G D 3.1.0 #4
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff817093d8>] panic+0x8c/0x1ac
[ 0.000000] [<ffffffff8105db63>] do_exit+0x803/0x950
[ 0.000000] [<ffffffff8170c2ea>] ?
_raw_spin_unlock_irqrestore+0x1a/0x20
[ 0.000000] [<ffffffff8105b3b5>] ? kmsg_dump+0x45/0x100
[ 0.000000] [<ffffffff8170d46f>] oops_end+0xaf/0xf0
[ 0.000000] [<ffffffff8103e050>] no_context+0xf0/0x260
[ 0.000000] [<ffffffff8103e2dd>] __bad_area_nosemaphore+0x11d/0x220
[ 0.000000] [<ffffffff8103e3ee>] bad_area_nosemaphore+0xe/0x10
[ 0.000000] [<ffffffff8170fd8b>] do_page_fault+0x36b/0x510
[ 0.000000] [<ffffffff81009ecf>] ?
__raw_callee_save_xen_restore_fl+0x11/0x1e
[ 0.000000] [<ffffffff8170c7b5>] page_fault+0x25/0x30
[ 0.000000] [<ffffffff81008a5a>] ? xen_set_pte+0x3a/0x1f0
[ 0.000000] [<ffffffff81004ef1>] ?
__raw_callee_save_xen_pte_val+0x11/0x1e
[ 0.000000] [<ffffffff81cb299f>] xen_set_pte_init+0x7f/0x87
[ 0.000000] [<ffffffff81cc2a99>] __early_set_fixmap+0x73/0xbc
[ 0.000000] [<ffffffff81cc2c01>] __early_ioremap+0x11f/0x1ad
[ 0.000000] [<ffffffff81cc2f07>] early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff81cbc2ad>] get_mpc_size+0x14/0x4c
[ 0.000000] [<ffffffff81cbc3b1>] smp_scan_config+0xcc/0xfa
[ 0.000000] [<ffffffff81cf3300>] ?
firmware_map_add_hotplug+0xa4/0xa4
[ 0.000000] [<ffffffff81cbcfb3>] default_find_smp_config+0x36/0x5a
[ 0.000000] [<ffffffff81cb4770>] setup_arch+0x539/0xad7
[ 0.000000] [<ffffffff81009ecf>] ?
__raw_callee_save_xen_restore_fl+0x11/0x1e
[ 0.000000] [<ffffffff81cf3300>] ?
firmware_map_add_hotplug+0xa4/0xa4
[ 0.000000] [<ffffffff81709534>] ? printk+0x3c/0x3e
[ 0.000000] [<ffffffff8170c2ea>] ?
_raw_spin_unlock_irqrestore+0x1a/0x20
[ 0.000000] [<ffffffff81cf3300>] ?
firmware_map_add_hotplug+0xa4/0xa4
[ 0.000000] [<ffffffff81cae93b>] start_kernel+0x8e/0x359
[ 0.000000] [<ffffffff81cae347>]
x86_64_start_reservations+0x132/0x136
[ 0.000000] [<ffffffff81cb1eac>] xen_start_kernel+0x5ef/0x5f6
(XEN) Domain 0 crashed: ''noreboot'' set - not rebooting.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Konrad Rzeszutek Wilk
2011-Oct-25 19:25 UTC
[Xen-devel] Re: Xen dom0 linux kernel 3.1 boot failure ptwr_emulate: could not get_page_from_l1e
On Mon, Oct 24, 2011 at 03:34:57PM -0400, 2013pfoley wrote:> Hi, > > I''m having xen dom0 crash during bootup when using the linux 3.1 > kernel however it worked when using the linux 2.6.34 kernel. > I tried using xen-unstable but got the exact same error as with xen > 4.1.1. > > xen-unstable changeset: 23981:6c583d35d76d > linux kernel 3.1.0.. snip..> (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009f400 (usable) > (XEN) 000000000009f400 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000df61f000 (usable) > (XEN) 00000000df61f000 - 00000000df62c000 (ACPI data) > (XEN) 00000000df62c000 - 00000000df62d000 (usable) > (XEN) 00000000df62d000 - 00000000e4000000 (reserved) > (XEN) 00000000fec00000 - 00000000fee10000 (reserved) > (XEN) 00000000ff800000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 000000061ffff000 (usable)So 24MB.. .. snip..> mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.1.0 (root@galapagos) (gcc version > 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #4 SMP Mon Oct 24 15:03:22 > EDT 2011 > [ 0.000000] Command line: root=/dev/sda2 bonding.mode=4 > bonding.miimon=100 console=hvc0 debug initcall_debug earlyprintk=xen > [ 0.000000] Freeing e4000-fec00 pfn range: 109568 pages freed > [ 0.000000] Freeing fee10-ff800 pfn range: 2544 pages freed > [ 0.000000] released 112112 pages of unused memory > [ 0.000000] 1-1 mapping on a0->100 > [ 0.000000] 1-1 mapping on df61f->df62c > [ 0.000000] 1-1 mapping on df62d->100000 > [ 0.000000] Set 133696 page(s) to 1-1 mapping. > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) > [ 0.000000] Xen: 000000000009f400 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 00000000df61f000 (usable) > [ 0.000000] Xen: 00000000df61f000 - 00000000df62c000 (ACPI data) > [ 0.000000] Xen: 00000000df62c000 - 00000000df62d000 (usable) > [ 0.000000] Xen: 00000000df62d000 - 00000000e4000000 (reserved) > [ 0.000000] Xen: 00000000fec00000 - 00000000fee10000 (reserved) > [ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 000000063b5ef000 (usable)So Xen reported that memory ends at 000000061ffff000 but we decided that it must have more. Which is OK as we basically adding the 112112 pages we freed. CC-ing David here in case he has some ideas.> [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.7 present. > [ 0.000000] DMI: HP ProLiant DL380 G6, BIOS P62 05/05/2011 > [ 0.000000] e820 update range: 0000000000000000 - > 0000000000010000 (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - > 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x63b5ef max_arch_pfn = 0x400000000 > [ 0.000000] last_pfn = 0xdf62d max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80 > (XEN) mm.c:945:d0 Error getting mfn 100 (pfn 5555555555555555) from > L1 entry 8000000000100461 for l1e_owner=0, pg_owner=0 > (XEN) mm.c:5046:d0 ptwr_emulate: could not get_page_from_l1e()Oh wait, This is MFN 100? Nothing to do with E820 then. But what is weird is that the PFN is 555555..> [ 0.000000] BUG: unable to handle kernel NULL pointer dereference > at (null) > [ 0.000000] IP: [<ffffffff81008a5a>] xen_set_pte+0x3a/0x1f0 > [ 0.000000] PGD 0 > [ 0.000000] Oops: 0003 [#1] SMP > [ 0.000000] CPU 0 > [ 0.000000] Modules linked in: > [ 0.000000] > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0 #4 HP > ProLiant DL380 G6 > [ 0.000000] RIP: e030:[<ffffffff81008a5a>] [<ffffffff81008a5a>] > xen_set_pte+0x3a/0x1f0 > [ 0.000000] RSP: e02b:ffffffff81c01d50 EFLAGS: 00010097 > [ 0.000000] RAX: 0000000000000000 RBX: ffffffff81d573c0 RCX: > 0000000000000001 > [ 0.000000] RDX: 0000000010000001 RSI: 8000000000100461 RDI: > ffffffff81d573c0 > [ 0.000000] RBP: ffffffff81c01d90 R08: 0000000000000000 R09: > 00000000000f4f90 > [ 0.000000] R10: 00000000deadbeef R11: 0000000000000010 R12: > 8000000000100461 > [ 0.000000] R13: 8000000000100463 R14: 8000000000000563 R15: > 0000000000100000 > [ 0.000000] FS: 0000000000000000(0000) GS:ffffffff81c9a000(0000) > knlGS:0000000000000000 > [ 0.000000] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 0.000000] CR2: 0000000000000000 CR3: 0000000001c05000 CR4: > 0000000000002660 > [ 0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > [ 0.000000] DR3: 0000000000000000 DR6: 0000000000000000 DR7: > 0000000000000000 > [ 0.000000] Process swapper (pid: 0, threadinfo ffffffff81c00000, > task ffffffff81c0d020) > [ 0.000000] Stack: > [ 0.000000] ffffffff81004ef1 0000000000000010 00000000deadbeef > ffffffff81d573c0 > [ 0.000000] 0000000000000100 8000000000100463 8000000000000563 > 0000000000100000 > [ 0.000000] ffffffff81c01dc0 ffffffff81cb299f 0000000000100000 > ffffffffff478000 > [ 0.000000] Call Trace: > [ 0.000000] [<ffffffff81004ef1>] ? > __raw_callee_save_xen_pte_val+0x11/0x1e > [ 0.000000] [<ffffffff81cb299f>] xen_set_pte_init+0x7f/0x87 > [ 0.000000] [<ffffffff81cc2a99>] __early_set_fixmap+0x73/0xbc > [ 0.000000] [<ffffffff81cc2c01>] __early_ioremap+0x11f/0x1ad > [ 0.000000] [<ffffffff81cc2f07>] early_ioremap+0x13/0x15 > [ 0.000000] [<ffffffff81cbc2ad>] get_mpc_size+0x14/0x4c > [ 0.000000] [<ffffffff81cbc3b1>] smp_scan_config+0xcc/0xfa > [ 0.000000] [<ffffffff81cf3300>] ? > firmware_map_add_hotplug+0xa4/0xa4 > [ 0.000000] [<ffffffff81cbcfb3>] default_find_smp_config+0x36/0x5a > [ 0.000000] [<ffffffff81cb4770>] setup_arch+0x539/0xad7 > [ 0.000000] [<ffffffff81009ecf>] ? > __raw_callee_save_xen_restore_fl+0x11/0x1e > [ 0.000000] [<ffffffff81cf3300>] ? > firmware_map_add_hotplug+0xa4/0xa4 > [ 0.000000] [<ffffffff81709534>] ? printk+0x3c/0x3e > [ 0.000000] [<ffffffff8170c2ea>] ? > _raw_spin_unlock_irqrestore+0x1a/0x20 > [ 0.000000] [<ffffffff81cf3300>] ? > firmware_map_add_hotplug+0xa4/0xa4 > [ 0.000000] [<ffffffff81cae93b>] start_kernel+0x8e/0x359 > [ 0.000000] [<ffffffff81cae347>] > x86_64_start_reservations+0x132/0x136 > [ 0.000000] [<ffffffff81cb1eac>] xen_start_kernel+0x5ef/0x5f6 > [ 0.000000] Code: 89 5d d8 4c 89 65 e0 48 89 fb 4c 89 6d e8 4c 89 > 75 f0 49 89 f4 85 c0 4c 89 7d f8 0f 85 17 01 00 00 e8 2b 06 03 00 83 > f8 01 74 1e <4c> 89 23 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8 4c 8b 75 > f0 4c 8b > [ 0.000000] RIP [<ffffffff81008a5a>] xen_set_pte+0x3a/0x1f0 > [ 0.000000] RSP <ffffffff81c01d50> > [ 0.000000] CR2: 0000000000000000 > [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- > [ 0.000000] Kernel panic - not syncing: Attempted to kill the > idle task! > [ 0.000000] Pid: 0, comm: swapper Tainted: G D 3.1.0 #4 > [ 0.000000] Call Trace: > [ 0.000000] [<ffffffff817093d8>] panic+0x8c/0x1ac > [ 0.000000] [<ffffffff8105db63>] do_exit+0x803/0x950 > [ 0.000000] [<ffffffff8170c2ea>] ? > _raw_spin_unlock_irqrestore+0x1a/0x20 > [ 0.000000] [<ffffffff8105b3b5>] ? kmsg_dump+0x45/0x100 > [ 0.000000] [<ffffffff8170d46f>] oops_end+0xaf/0xf0 > [ 0.000000] [<ffffffff8103e050>] no_context+0xf0/0x260 > [ 0.000000] [<ffffffff8103e2dd>] __bad_area_nosemaphore+0x11d/0x220 > [ 0.000000] [<ffffffff8103e3ee>] bad_area_nosemaphore+0xe/0x10 > [ 0.000000] [<ffffffff8170fd8b>] do_page_fault+0x36b/0x510 > [ 0.000000] [<ffffffff81009ecf>] ? > __raw_callee_save_xen_restore_fl+0x11/0x1e > [ 0.000000] [<ffffffff8170c7b5>] page_fault+0x25/0x30 > [ 0.000000] [<ffffffff81008a5a>] ? xen_set_pte+0x3a/0x1f0 > [ 0.000000] [<ffffffff81004ef1>] ? > __raw_callee_save_xen_pte_val+0x11/0x1e > [ 0.000000] [<ffffffff81cb299f>] xen_set_pte_init+0x7f/0x87 > [ 0.000000] [<ffffffff81cc2a99>] __early_set_fixmap+0x73/0xbc > [ 0.000000] [<ffffffff81cc2c01>] __early_ioremap+0x11f/0x1ad > [ 0.000000] [<ffffffff81cc2f07>] early_ioremap+0x13/0x15 > [ 0.000000] [<ffffffff81cbc2ad>] get_mpc_size+0x14/0x4c > [ 0.000000] [<ffffffff81cbc3b1>] smp_scan_config+0xcc/0xfa > [ 0.000000] [<ffffffff81cf3300>] ? > firmware_map_add_hotplug+0xa4/0xa4 > [ 0.000000] [<ffffffff81cbcfb3>] default_find_smp_config+0x36/0x5a > [ 0.000000] [<ffffffff81cb4770>] setup_arch+0x539/0xad7 > [ 0.000000] [<ffffffff81009ecf>] ? > __raw_callee_save_xen_restore_fl+0x11/0x1e > [ 0.000000] [<ffffffff81cf3300>] ? > firmware_map_add_hotplug+0xa4/0xa4 > [ 0.000000] [<ffffffff81709534>] ? printk+0x3c/0x3e > [ 0.000000] [<ffffffff8170c2ea>] ? > _raw_spin_unlock_irqrestore+0x1a/0x20 > [ 0.000000] [<ffffffff81cf3300>] ? > firmware_map_add_hotplug+0xa4/0xa4 > [ 0.000000] [<ffffffff81cae93b>] start_kernel+0x8e/0x359 > [ 0.000000] [<ffffffff81cae347>] > x86_64_start_reservations+0x132/0x136 > [ 0.000000] [<ffffffff81cb1eac>] xen_start_kernel+0x5ef/0x5f6 > (XEN) Domain 0 crashed: ''noreboot'' set - not rebooting. > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Konrad Rzeszutek Wilk
2011-Oct-31 14:08 UTC
[Xen-devel] Re: Xen dom0 linux kernel 3.1 boot failure ptwr_emulate: could not get_page_from_l1e
On Mon, Oct 31, 2011 at 01:17:09PM +0000, Tobias Heinlein wrote:> Hi, > > 2013pfoley <2013pfoley <at> tjhsst.edu> writes: > > [..] > > > > [ 0.000000] last_pfn = 0x63b5ef max_arch_pfn = 0x400000000 > > [ 0.000000] last_pfn = 0xdf62d max_arch_pfn = 0x400000000 > > [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80 > > (XEN) mm.c:945:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 > > entry 8000000000100461 for l1e_owner=0, pg_owner=0 > > (XEN) mm.c:5046:d0 ptwr_emulate: could not get_page_from_l1e() > > [ 0.000000] BUG: unable to handle kernel NULL pointer dereference at > > (null) > > [ 0.000000] IP: [<ffffffff81008a5a>] xen_set_pte+0x3a/0x1f0 > > [ 0.000000] PGD 0 > > [ 0.000000] Oops: 0003 [#1] SMP > > [ 0.000000] CPU 0 > > [ 0.000000] Modules linked in: > > [ 0.000000] > > [ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0 #4 HP ProLiant > > DL380 G6 > > I get the exact same error here. Reading from your output, it seems we have the > same hardware; I have this problem on a HP ProLiant DL380 G6, too. > > After a wild hint from a guy on ##xen to play around with the BIOS settings, I > was able to narrow down the problem to a setting called "MPS Table Mode". It is > set to "Full Table APIC" by default (with which the crash occurs), but when it''s > set to "Disabled" Xen boots the kernel just fine. > > FWIW, the help text of the setting is: "Multi Processor Specification (MPS) > Table / APIC Setting is used for interrupt routing. Certain unsupported > operating systems may require setting the MPS Table Mode to APIC Disabled."Oh nice. What does you /proc/interrupts look like compared to baremetal?> > (BTW, the kernel itself boots fine without Xen. So I''m not sure if this belongs > to the LKML at all.)It does not. But CC-ing xen-devel here for further tracking. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Tobias Heinlein
2011-Nov-01 12:47 UTC
Re: [Xen-devel] Re: Xen dom0 linux kernel 3.1 boot failure ptwr_emulate: could not get_page_from_l1e
I''m not sure if it was obvious, but yesterday I noticed that setting the "MPS table mode" to ''Disabled'' actually made SMP stop working, i.e. the kernel only recognized a single CPU. This is of course not an option, so I enabled (set to ''Full Table APIC'') the setting again and played around with my kernel config a bit. The kernel that crashed had CONFIG_X86_MPPARSE=y, and if I disable that, it boots fine (with SMP, and with the BIOS setting set to ''Full Table APIC''). So, I for one am quite happy now as I finally found a working configuration. But I''d still like to know if this is a hardware-specific issue, and/or a bug in Xen. Konrad Rzeszutek Wilk wrote, on 10/31/2011 03:08 PM:> Oh nice. What does you /proc/interrupts look like compared to > baremetal?While I was performing all my kernel tests, I saved the outputs of `dmesg` and `cat /proc/interrupts`. Sorry for attaching a tarball, but I''d like to give you as much information as possible. You''ll probably only need the latest tests (#5 to #7), but just in case, I also included the others. Contents of the tarball: Baremetal tests: xen-hp/1/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=y, SMP working xen-hp/2/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=n, SMP working xen-hp/3/: MPS mode ''Disabled'', CONFIG_X86_MPPARSE=y, SMP not working xen-hp/4/: MPS mode ''Disabled'', CONFIG_X86_MPPARSE=n, SMP not working Xen tests: xen-hp/5/: MPS mode ''Disabled'', CONFIG_X86_MPPARSE=n, SMP not working xen-hp/6/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=n, SMP working xen-hp/7/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=y, CRASHES (Therefore, #6 is the best working solution; #7 is what originally triggered the crash.) Thanks. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Konrad Rzeszutek Wilk
2011-Nov-10 16:36 UTC
Re: [Xen-devel] Re: Xen dom0 linux kernel 3.1 boot failure ptwr_emulate: could not get_page_from_l1e
On Tue, Nov 01, 2011 at 01:47:15PM +0100, Tobias Heinlein wrote:> I''m not sure if it was obvious, but yesterday I noticed that setting the > "MPS table mode" to ''Disabled'' actually made SMP stop working, i.e. the > kernel only recognized a single CPU. This is of course not an option, so > I enabled (set to ''Full Table APIC'') the setting again and played around > with my kernel config a bit. The kernel that crashed had > CONFIG_X86_MPPARSE=y, and if I disable that, it boots fine (with SMP, > and with the BIOS setting set to ''Full Table APIC'').Hm, that is good to know.> > So, I for one am quite happy now as I finally found a working > configuration. But I''d still like to know if this is a hardware-specific > issue, and/or a bug in Xen.Well,.. I think it just that we hadn''t touched any machines that have MP tables instead of ACPI. Or that have fully populated MP tables. I presume that there are some ACPI tables, but perhaps not the _PRT ones (which are the ones we need to parse the IRQ data). But more importantly - how recent is this machine?> > Konrad Rzeszutek Wilk wrote, on 10/31/2011 03:08 PM: > > Oh nice. What does you /proc/interrupts look like compared to > > baremetal? > > While I was performing all my kernel tests, I saved the outputs of > `dmesg` and `cat /proc/interrupts`. Sorry for attaching a tarball, but > I''d like to give you as much information as possible. You''ll probably > only need the latest tests (#5 to #7), but just in case, I also included > the others. > > Contents of the tarball: > > Baremetal tests: > xen-hp/1/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=y, SMP working > xen-hp/2/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=n, SMP working > xen-hp/3/: MPS mode ''Disabled'', CONFIG_X86_MPPARSE=y, SMP not working > xen-hp/4/: MPS mode ''Disabled'', CONFIG_X86_MPPARSE=n, SMP not working > > Xen tests: > xen-hp/5/: MPS mode ''Disabled'', CONFIG_X86_MPPARSE=n, SMP not working > xen-hp/6/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=n, SMP working > xen-hp/7/: MPS mode ''Full Table APIC'', CONFIG_X86_MPPARSE=y, CRASHES > > (Therefore, #6 is the best working solution; #7 is what originally > triggered the crash.) > > Thanks. >> _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Tobias Heinlein
2011-Nov-12 21:13 UTC
Re: [Xen-devel] Re: Xen dom0 linux kernel 3.1 boot failure ptwr_emulate: could not get_page_from_l1e
> Well,.. I think it just that we hadn''t touched any machines that > have MP tables instead of ACPI. Or that have fully populated MP tables. > I presume that there are some ACPI tables, but perhaps not the _PRT ones > (which are the ones we need to parse the IRQ data). > > But more importantly - how recent is this machine?It''s a HP ProLiant G6; they were introduced in March 2009. http://www.hp.com/hpinfo/newsroom/press/2009/090330xb.html _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel